mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 23:45:26 +07:00
783f6d3dcf
Add BCM63xx USBH PHY driver for BMIPS. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Simon Arlott <simon@octiron.net> Link: https://lore.kernel.org/r/20200720131209.1236590-3-noltari@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
458 lines
12 KiB
C
458 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* BCM6328 USBH PHY Controller Driver
|
|
*
|
|
* Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
* Copyright (C) 2015 Simon Arlott
|
|
*
|
|
* Derived from bcm963xx_4.12L.06B_consumer/kernel/linux/arch/mips/bcm963xx/setup.c:
|
|
* Copyright (C) 2002 Broadcom Corporation
|
|
*
|
|
* Derived from OpenWrt patches:
|
|
* Copyright (C) 2013 Jonas Gorski <jonas.gorski@gmail.com>
|
|
* Copyright (C) 2013 Florian Fainelli <f.fainelli@gmail.com>
|
|
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
|
|
/* USBH control register offsets */
|
|
enum usbh_regs {
|
|
USBH_BRT_CONTROL1 = 0,
|
|
USBH_BRT_CONTROL2,
|
|
USBH_BRT_STATUS1,
|
|
USBH_BRT_STATUS2,
|
|
USBH_UTMI_CONTROL1,
|
|
#define USBH_UC1_DEV_MODE_SEL BIT(0)
|
|
USBH_TEST_PORT_CONTROL,
|
|
USBH_PLL_CONTROL1,
|
|
#define USBH_PLLC_REFCLKSEL_SHIFT 0
|
|
#define USBH_PLLC_REFCLKSEL_MASK (0x3 << USBH_PLLC_REFCLKSEL_SHIFT)
|
|
#define USBH_PLLC_CLKSEL_SHIFT 2
|
|
#define USBH_PLLC_CLKSEL_MASK (0x3 << USBH_PLLC_CLKSEL_MASK)
|
|
#define USBH_PLLC_XTAL_PWRDWNB BIT(4)
|
|
#define USBH_PLLC_PLL_PWRDWNB BIT(5)
|
|
#define USBH_PLLC_PLL_CALEN BIT(6)
|
|
#define USBH_PLLC_PHYPLL_BYP BIT(7)
|
|
#define USBH_PLLC_PLL_RESET BIT(8)
|
|
#define USBH_PLLC_PLL_IDDQ_PWRDN BIT(9)
|
|
#define USBH_PLLC_PLL_PWRDN_DELAY BIT(10)
|
|
#define USBH_6318_PLLC_PLL_SUSPEND_EN BIT(27)
|
|
#define USBH_6318_PLLC_PHYPLL_BYP BIT(29)
|
|
#define USBH_6318_PLLC_PLL_RESET BIT(30)
|
|
#define USBH_6318_PLLC_PLL_IDDQ_PWRDN BIT(31)
|
|
USBH_SWAP_CONTROL,
|
|
#define USBH_SC_OHCI_DATA_SWAP BIT(0)
|
|
#define USBH_SC_OHCI_ENDIAN_SWAP BIT(1)
|
|
#define USBH_SC_OHCI_LOGICAL_ADDR_EN BIT(2)
|
|
#define USBH_SC_EHCI_DATA_SWAP BIT(3)
|
|
#define USBH_SC_EHCI_ENDIAN_SWAP BIT(4)
|
|
#define USBH_SC_EHCI_LOGICAL_ADDR_EN BIT(5)
|
|
#define USBH_SC_USB_DEVICE_SEL BIT(6)
|
|
USBH_GENERIC_CONTROL,
|
|
#define USBH_GC_PLL_SUSPEND_EN BIT(1)
|
|
USBH_FRAME_ADJUST_VALUE,
|
|
USBH_SETUP,
|
|
#define USBH_S_IOC BIT(4)
|
|
#define USBH_S_IPP BIT(5)
|
|
USBH_MDIO,
|
|
USBH_MDIO32,
|
|
USBH_USB_SIM_CONTROL,
|
|
#define USBH_USC_LADDR_SEL BIT(5)
|
|
|
|
__USBH_ENUM_SIZE
|
|
};
|
|
|
|
struct bcm63xx_usbh_phy_variant {
|
|
/* Registers */
|
|
long regs[__USBH_ENUM_SIZE];
|
|
|
|
/* PLLC bits to set/clear for power on */
|
|
u32 power_pllc_clr;
|
|
u32 power_pllc_set;
|
|
|
|
/* Setup bits to set/clear for power on */
|
|
u32 setup_clr;
|
|
u32 setup_set;
|
|
|
|
/* Swap Control bits to set */
|
|
u32 swapctl_dev_set;
|
|
|
|
/* Test Port Control value to set if non-zero */
|
|
u32 tpc_val;
|
|
|
|
/* USB Sim Control bits to set */
|
|
u32 usc_set;
|
|
|
|
/* UTMI Control 1 bits to set */
|
|
u32 utmictl1_dev_set;
|
|
};
|
|
|
|
struct bcm63xx_usbh_phy {
|
|
void __iomem *base;
|
|
struct clk *usbh_clk;
|
|
struct clk *usb_ref_clk;
|
|
struct reset_control *reset;
|
|
const struct bcm63xx_usbh_phy_variant *variant;
|
|
bool device_mode;
|
|
};
|
|
|
|
static const struct bcm63xx_usbh_phy_variant usbh_bcm6318 = {
|
|
.regs = {
|
|
[USBH_BRT_CONTROL1] = -1,
|
|
[USBH_BRT_CONTROL2] = -1,
|
|
[USBH_BRT_STATUS1] = -1,
|
|
[USBH_BRT_STATUS2] = -1,
|
|
[USBH_UTMI_CONTROL1] = 0x2c,
|
|
[USBH_TEST_PORT_CONTROL] = 0x1c,
|
|
[USBH_PLL_CONTROL1] = 0x04,
|
|
[USBH_SWAP_CONTROL] = 0x0c,
|
|
[USBH_GENERIC_CONTROL] = -1,
|
|
[USBH_FRAME_ADJUST_VALUE] = 0x08,
|
|
[USBH_SETUP] = 0x00,
|
|
[USBH_MDIO] = 0x14,
|
|
[USBH_MDIO32] = 0x18,
|
|
[USBH_USB_SIM_CONTROL] = 0x20,
|
|
},
|
|
.power_pllc_clr = USBH_6318_PLLC_PLL_IDDQ_PWRDN,
|
|
.power_pllc_set = USBH_6318_PLLC_PLL_SUSPEND_EN,
|
|
.setup_set = USBH_S_IOC,
|
|
.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
|
|
.usc_set = USBH_USC_LADDR_SEL,
|
|
.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
|
|
};
|
|
|
|
static const struct bcm63xx_usbh_phy_variant usbh_bcm6328 = {
|
|
.regs = {
|
|
[USBH_BRT_CONTROL1] = 0x00,
|
|
[USBH_BRT_CONTROL2] = 0x04,
|
|
[USBH_BRT_STATUS1] = 0x08,
|
|
[USBH_BRT_STATUS2] = 0x0c,
|
|
[USBH_UTMI_CONTROL1] = 0x10,
|
|
[USBH_TEST_PORT_CONTROL] = 0x14,
|
|
[USBH_PLL_CONTROL1] = 0x18,
|
|
[USBH_SWAP_CONTROL] = 0x1c,
|
|
[USBH_GENERIC_CONTROL] = 0x20,
|
|
[USBH_FRAME_ADJUST_VALUE] = 0x24,
|
|
[USBH_SETUP] = 0x28,
|
|
[USBH_MDIO] = 0x2c,
|
|
[USBH_MDIO32] = 0x30,
|
|
[USBH_USB_SIM_CONTROL] = 0x34,
|
|
},
|
|
.setup_set = USBH_S_IOC,
|
|
.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
|
|
.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
|
|
};
|
|
|
|
static const struct bcm63xx_usbh_phy_variant usbh_bcm6358 = {
|
|
.regs = {
|
|
[USBH_BRT_CONTROL1] = -1,
|
|
[USBH_BRT_CONTROL2] = -1,
|
|
[USBH_BRT_STATUS1] = -1,
|
|
[USBH_BRT_STATUS2] = -1,
|
|
[USBH_UTMI_CONTROL1] = -1,
|
|
[USBH_TEST_PORT_CONTROL] = 0x24,
|
|
[USBH_PLL_CONTROL1] = -1,
|
|
[USBH_SWAP_CONTROL] = 0x00,
|
|
[USBH_GENERIC_CONTROL] = -1,
|
|
[USBH_FRAME_ADJUST_VALUE] = -1,
|
|
[USBH_SETUP] = -1,
|
|
[USBH_MDIO] = -1,
|
|
[USBH_MDIO32] = -1,
|
|
[USBH_USB_SIM_CONTROL] = -1,
|
|
},
|
|
/*
|
|
* The magic value comes for the original vendor BSP
|
|
* and is needed for USB to work. Datasheet does not
|
|
* help, so the magic value is used as-is.
|
|
*/
|
|
.tpc_val = 0x1c0020,
|
|
};
|
|
|
|
static const struct bcm63xx_usbh_phy_variant usbh_bcm6368 = {
|
|
.regs = {
|
|
[USBH_BRT_CONTROL1] = 0x00,
|
|
[USBH_BRT_CONTROL2] = 0x04,
|
|
[USBH_BRT_STATUS1] = 0x08,
|
|
[USBH_BRT_STATUS2] = 0x0c,
|
|
[USBH_UTMI_CONTROL1] = 0x10,
|
|
[USBH_TEST_PORT_CONTROL] = 0x14,
|
|
[USBH_PLL_CONTROL1] = 0x18,
|
|
[USBH_SWAP_CONTROL] = 0x1c,
|
|
[USBH_GENERIC_CONTROL] = -1,
|
|
[USBH_FRAME_ADJUST_VALUE] = 0x24,
|
|
[USBH_SETUP] = 0x28,
|
|
[USBH_MDIO] = 0x2c,
|
|
[USBH_MDIO32] = 0x30,
|
|
[USBH_USB_SIM_CONTROL] = 0x34,
|
|
},
|
|
.power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
|
|
.setup_set = USBH_S_IOC,
|
|
.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
|
|
.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
|
|
};
|
|
|
|
static const struct bcm63xx_usbh_phy_variant usbh_bcm63268 = {
|
|
.regs = {
|
|
[USBH_BRT_CONTROL1] = 0x00,
|
|
[USBH_BRT_CONTROL2] = 0x04,
|
|
[USBH_BRT_STATUS1] = 0x08,
|
|
[USBH_BRT_STATUS2] = 0x0c,
|
|
[USBH_UTMI_CONTROL1] = 0x10,
|
|
[USBH_TEST_PORT_CONTROL] = 0x14,
|
|
[USBH_PLL_CONTROL1] = 0x18,
|
|
[USBH_SWAP_CONTROL] = 0x1c,
|
|
[USBH_GENERIC_CONTROL] = 0x20,
|
|
[USBH_FRAME_ADJUST_VALUE] = 0x24,
|
|
[USBH_SETUP] = 0x28,
|
|
[USBH_MDIO] = 0x2c,
|
|
[USBH_MDIO32] = 0x30,
|
|
[USBH_USB_SIM_CONTROL] = 0x34,
|
|
},
|
|
.power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
|
|
.setup_clr = USBH_S_IPP,
|
|
.setup_set = USBH_S_IOC,
|
|
.swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
|
|
.utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
|
|
};
|
|
|
|
static inline bool usbh_has_reg(struct bcm63xx_usbh_phy *usbh, int reg)
|
|
{
|
|
return (usbh->variant->regs[reg] >= 0);
|
|
}
|
|
|
|
static inline u32 usbh_readl(struct bcm63xx_usbh_phy *usbh, int reg)
|
|
{
|
|
return __raw_readl(usbh->base + usbh->variant->regs[reg]);
|
|
}
|
|
|
|
static inline void usbh_writel(struct bcm63xx_usbh_phy *usbh, int reg,
|
|
u32 value)
|
|
{
|
|
__raw_writel(value, usbh->base + usbh->variant->regs[reg]);
|
|
}
|
|
|
|
static int bcm63xx_usbh_phy_init(struct phy *phy)
|
|
{
|
|
struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(usbh->usbh_clk);
|
|
if (ret) {
|
|
dev_err(&phy->dev, "unable to enable usbh clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(usbh->usb_ref_clk);
|
|
if (ret) {
|
|
dev_err(&phy->dev, "unable to enable usb_ref clock: %d\n", ret);
|
|
clk_disable_unprepare(usbh->usbh_clk);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_reset(usbh->reset);
|
|
if (ret) {
|
|
dev_err(&phy->dev, "unable to reset device: %d\n", ret);
|
|
clk_disable_unprepare(usbh->usb_ref_clk);
|
|
clk_disable_unprepare(usbh->usbh_clk);
|
|
return ret;
|
|
}
|
|
|
|
/* Configure to work in native CPU endian */
|
|
if (usbh_has_reg(usbh, USBH_SWAP_CONTROL)) {
|
|
u32 val = usbh_readl(usbh, USBH_SWAP_CONTROL);
|
|
|
|
val |= USBH_SC_EHCI_DATA_SWAP;
|
|
val &= ~USBH_SC_EHCI_ENDIAN_SWAP;
|
|
|
|
val |= USBH_SC_OHCI_DATA_SWAP;
|
|
val &= ~USBH_SC_OHCI_ENDIAN_SWAP;
|
|
|
|
if (usbh->device_mode && usbh->variant->swapctl_dev_set)
|
|
val |= usbh->variant->swapctl_dev_set;
|
|
|
|
usbh_writel(usbh, USBH_SWAP_CONTROL, val);
|
|
}
|
|
|
|
if (usbh_has_reg(usbh, USBH_SETUP)) {
|
|
u32 val = usbh_readl(usbh, USBH_SETUP);
|
|
|
|
val |= usbh->variant->setup_set;
|
|
val &= ~usbh->variant->setup_clr;
|
|
|
|
usbh_writel(usbh, USBH_SETUP, val);
|
|
}
|
|
|
|
if (usbh_has_reg(usbh, USBH_USB_SIM_CONTROL)) {
|
|
u32 val = usbh_readl(usbh, USBH_USB_SIM_CONTROL);
|
|
|
|
val |= usbh->variant->usc_set;
|
|
|
|
usbh_writel(usbh, USBH_USB_SIM_CONTROL, val);
|
|
}
|
|
|
|
if (usbh->variant->tpc_val &&
|
|
usbh_has_reg(usbh, USBH_TEST_PORT_CONTROL))
|
|
usbh_writel(usbh, USBH_TEST_PORT_CONTROL,
|
|
usbh->variant->tpc_val);
|
|
|
|
if (usbh->device_mode &&
|
|
usbh_has_reg(usbh, USBH_UTMI_CONTROL1) &&
|
|
usbh->variant->utmictl1_dev_set) {
|
|
u32 val = usbh_readl(usbh, USBH_UTMI_CONTROL1);
|
|
|
|
val |= usbh->variant->utmictl1_dev_set;
|
|
|
|
usbh_writel(usbh, USBH_UTMI_CONTROL1, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm63xx_usbh_phy_power_on(struct phy *phy)
|
|
{
|
|
struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
|
|
|
|
if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
|
|
u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);
|
|
|
|
val |= usbh->variant->power_pllc_set;
|
|
val &= ~usbh->variant->power_pllc_clr;
|
|
|
|
usbh_writel(usbh, USBH_PLL_CONTROL1, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm63xx_usbh_phy_power_off(struct phy *phy)
|
|
{
|
|
struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
|
|
|
|
if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
|
|
u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);
|
|
|
|
val &= ~usbh->variant->power_pllc_set;
|
|
val |= usbh->variant->power_pllc_clr;
|
|
|
|
usbh_writel(usbh, USBH_PLL_CONTROL1, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm63xx_usbh_phy_exit(struct phy *phy)
|
|
{
|
|
struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
|
|
|
|
clk_disable_unprepare(usbh->usbh_clk);
|
|
clk_disable_unprepare(usbh->usb_ref_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops bcm63xx_usbh_phy_ops = {
|
|
.exit = bcm63xx_usbh_phy_exit,
|
|
.init = bcm63xx_usbh_phy_init,
|
|
.power_off = bcm63xx_usbh_phy_power_off,
|
|
.power_on = bcm63xx_usbh_phy_power_on,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct phy *bcm63xx_usbh_phy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct bcm63xx_usbh_phy *usbh = dev_get_drvdata(dev);
|
|
|
|
usbh->device_mode = !!args->args[0];
|
|
|
|
return of_phy_simple_xlate(dev, args);
|
|
}
|
|
|
|
static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct bcm63xx_usbh_phy *usbh;
|
|
const struct bcm63xx_usbh_phy_variant *variant;
|
|
struct phy *phy;
|
|
struct phy_provider *phy_provider;
|
|
|
|
usbh = devm_kzalloc(dev, sizeof(*usbh), GFP_KERNEL);
|
|
if (!usbh)
|
|
return -ENOMEM;
|
|
|
|
variant = device_get_match_data(dev);
|
|
if (!variant)
|
|
return -EINVAL;
|
|
usbh->variant = variant;
|
|
|
|
usbh->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(usbh->base))
|
|
return PTR_ERR(usbh->base);
|
|
|
|
usbh->reset = devm_reset_control_get_exclusive(dev, NULL);
|
|
if (IS_ERR(usbh->reset)) {
|
|
if (PTR_ERR(usbh->reset) != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get reset\n");
|
|
return PTR_ERR(usbh->reset);
|
|
}
|
|
|
|
usbh->usbh_clk = devm_clk_get_optional(dev, "usbh");
|
|
if (IS_ERR(usbh->usbh_clk))
|
|
return PTR_ERR(usbh->usbh_clk);
|
|
|
|
usbh->usb_ref_clk = devm_clk_get_optional(dev, "usb_ref");
|
|
if (IS_ERR(usbh->usb_ref_clk))
|
|
return PTR_ERR(usbh->usb_ref_clk);
|
|
|
|
phy = devm_phy_create(dev, NULL, &bcm63xx_usbh_phy_ops);
|
|
if (IS_ERR(phy)) {
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(phy);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, usbh);
|
|
phy_set_drvdata(phy, usbh);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev,
|
|
bcm63xx_usbh_phy_xlate);
|
|
if (IS_ERR(phy_provider)) {
|
|
dev_err(dev, "failed to register PHY provider\n");
|
|
return PTR_ERR(phy_provider);
|
|
}
|
|
|
|
dev_dbg(dev, "Registered BCM63xx USB PHY driver\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm63xx_usbh_phy_ids[] __initconst = {
|
|
{ .compatible = "brcm,bcm6318-usbh-phy", .data = &usbh_bcm6318 },
|
|
{ .compatible = "brcm,bcm6328-usbh-phy", .data = &usbh_bcm6328 },
|
|
{ .compatible = "brcm,bcm6358-usbh-phy", .data = &usbh_bcm6358 },
|
|
{ .compatible = "brcm,bcm6362-usbh-phy", .data = &usbh_bcm6368 },
|
|
{ .compatible = "brcm,bcm6368-usbh-phy", .data = &usbh_bcm6368 },
|
|
{ .compatible = "brcm,bcm63268-usbh-phy", .data = &usbh_bcm63268 },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm63xx_usbh_phy_ids);
|
|
|
|
static struct platform_driver bcm63xx_usbh_phy_driver __refdata = {
|
|
.driver = {
|
|
.name = "bcm63xx-usbh-phy",
|
|
.of_match_table = bcm63xx_usbh_phy_ids,
|
|
},
|
|
.probe = bcm63xx_usbh_phy_probe,
|
|
};
|
|
module_platform_driver(bcm63xx_usbh_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("BCM63xx USBH PHY driver");
|
|
MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
|
|
MODULE_AUTHOR("Simon Arlott");
|
|
MODULE_LICENSE("GPL");
|