linux_dsm_epyc7002/Documentation/devicetree/bindings/i2c/i2c-emev2.txt
Wolfram Sang 5faf6e1f58 i2c: emev2: add driver
Add a basic driver for the Renesas EMEV2 SoC. Based on the driver from
the BSP which was first worked on by Ian, and made ready for upstream by
me.

Signed-off-by: Ian Molton <ian.molton@codethink.co.uk>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-10 08:37:29 +02:00

23 lines
640 B
Plaintext

Device tree configuration for Renesas EMEV2 IIC controller
Required properties:
- compatible : "renesas,iic-emev2"
- reg : address start and address range size of device
- interrupts : specifier for the IIC controller interrupt
- clocks : phandle to the IP core SCLK
- clock-names : must be "sclk"
- #address-cells : should be <1>
- #size-cells : should be <0>
Example:
iic0: i2c@e0070000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe0070000 0x28>;
interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic0_sclk>;
clock-names = "sclk";
};