mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 03:07:29 +07:00
cf12c6729c
ata_host_alloc() can only fail due to memory allocation failures. Hence there is no need to print a message, as the memory allocation core code already takes care of that. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jens Axboe <axboe@kernel.dk>
1058 lines
27 KiB
C
1058 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Renesas R-Car SATA driver
|
|
*
|
|
* Author: Vladimir Barinov <source@cogentembedded.com>
|
|
* Copyright (C) 2013-2015 Cogent Embedded, Inc.
|
|
* Copyright (C) 2013-2015 Renesas Solutions Corp.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ata.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/err.h>
|
|
|
|
#define DRV_NAME "sata_rcar"
|
|
|
|
/* SH-Navi2G/ATAPI-ATA compatible task registers */
|
|
#define DATA_REG 0x100
|
|
#define SDEVCON_REG 0x138
|
|
|
|
/* SH-Navi2G/ATAPI module compatible control registers */
|
|
#define ATAPI_CONTROL1_REG 0x180
|
|
#define ATAPI_STATUS_REG 0x184
|
|
#define ATAPI_INT_ENABLE_REG 0x188
|
|
#define ATAPI_DTB_ADR_REG 0x198
|
|
#define ATAPI_DMA_START_ADR_REG 0x19C
|
|
#define ATAPI_DMA_TRANS_CNT_REG 0x1A0
|
|
#define ATAPI_CONTROL2_REG 0x1A4
|
|
#define ATAPI_SIG_ST_REG 0x1B0
|
|
#define ATAPI_BYTE_SWAP_REG 0x1BC
|
|
|
|
/* ATAPI control 1 register (ATAPI_CONTROL1) bits */
|
|
#define ATAPI_CONTROL1_ISM BIT(16)
|
|
#define ATAPI_CONTROL1_DTA32M BIT(11)
|
|
#define ATAPI_CONTROL1_RESET BIT(7)
|
|
#define ATAPI_CONTROL1_DESE BIT(3)
|
|
#define ATAPI_CONTROL1_RW BIT(2)
|
|
#define ATAPI_CONTROL1_STOP BIT(1)
|
|
#define ATAPI_CONTROL1_START BIT(0)
|
|
|
|
/* ATAPI status register (ATAPI_STATUS) bits */
|
|
#define ATAPI_STATUS_SATAINT BIT(11)
|
|
#define ATAPI_STATUS_DNEND BIT(6)
|
|
#define ATAPI_STATUS_DEVTRM BIT(5)
|
|
#define ATAPI_STATUS_DEVINT BIT(4)
|
|
#define ATAPI_STATUS_ERR BIT(2)
|
|
#define ATAPI_STATUS_NEND BIT(1)
|
|
#define ATAPI_STATUS_ACT BIT(0)
|
|
|
|
/* Interrupt enable register (ATAPI_INT_ENABLE) bits */
|
|
#define ATAPI_INT_ENABLE_SATAINT BIT(11)
|
|
#define ATAPI_INT_ENABLE_DNEND BIT(6)
|
|
#define ATAPI_INT_ENABLE_DEVTRM BIT(5)
|
|
#define ATAPI_INT_ENABLE_DEVINT BIT(4)
|
|
#define ATAPI_INT_ENABLE_ERR BIT(2)
|
|
#define ATAPI_INT_ENABLE_NEND BIT(1)
|
|
#define ATAPI_INT_ENABLE_ACT BIT(0)
|
|
|
|
/* Access control registers for physical layer control register */
|
|
#define SATAPHYADDR_REG 0x200
|
|
#define SATAPHYWDATA_REG 0x204
|
|
#define SATAPHYACCEN_REG 0x208
|
|
#define SATAPHYRESET_REG 0x20C
|
|
#define SATAPHYRDATA_REG 0x210
|
|
#define SATAPHYACK_REG 0x214
|
|
|
|
/* Physical layer control address command register (SATAPHYADDR) bits */
|
|
#define SATAPHYADDR_PHYRATEMODE BIT(10)
|
|
#define SATAPHYADDR_PHYCMD_READ BIT(9)
|
|
#define SATAPHYADDR_PHYCMD_WRITE BIT(8)
|
|
|
|
/* Physical layer control enable register (SATAPHYACCEN) bits */
|
|
#define SATAPHYACCEN_PHYLANE BIT(0)
|
|
|
|
/* Physical layer control reset register (SATAPHYRESET) bits */
|
|
#define SATAPHYRESET_PHYRST BIT(1)
|
|
#define SATAPHYRESET_PHYSRES BIT(0)
|
|
|
|
/* Physical layer control acknowledge register (SATAPHYACK) bits */
|
|
#define SATAPHYACK_PHYACK BIT(0)
|
|
|
|
/* Serial-ATA HOST control registers */
|
|
#define BISTCONF_REG 0x102C
|
|
#define SDATA_REG 0x1100
|
|
#define SSDEVCON_REG 0x1204
|
|
|
|
#define SCRSSTS_REG 0x1400
|
|
#define SCRSERR_REG 0x1404
|
|
#define SCRSCON_REG 0x1408
|
|
#define SCRSACT_REG 0x140C
|
|
|
|
#define SATAINTSTAT_REG 0x1508
|
|
#define SATAINTMASK_REG 0x150C
|
|
|
|
/* SATA INT status register (SATAINTSTAT) bits */
|
|
#define SATAINTSTAT_SERR BIT(3)
|
|
#define SATAINTSTAT_ATA BIT(0)
|
|
|
|
/* SATA INT mask register (SATAINTSTAT) bits */
|
|
#define SATAINTMASK_SERRMSK BIT(3)
|
|
#define SATAINTMASK_ERRMSK BIT(2)
|
|
#define SATAINTMASK_ERRCRTMSK BIT(1)
|
|
#define SATAINTMASK_ATAMSK BIT(0)
|
|
#define SATAINTMASK_ALL_GEN1 0x7ff
|
|
#define SATAINTMASK_ALL_GEN2 0xfff
|
|
|
|
#define SATA_RCAR_INT_MASK (SATAINTMASK_SERRMSK | \
|
|
SATAINTMASK_ATAMSK)
|
|
|
|
/* Physical Layer Control Registers */
|
|
#define SATAPCTLR1_REG 0x43
|
|
#define SATAPCTLR2_REG 0x52
|
|
#define SATAPCTLR3_REG 0x5A
|
|
#define SATAPCTLR4_REG 0x60
|
|
|
|
/* Descriptor table word 0 bit (when DTA32M = 1) */
|
|
#define SATA_RCAR_DTEND BIT(0)
|
|
|
|
#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
|
|
|
|
/* Gen2 Physical Layer Control Registers */
|
|
#define RCAR_GEN2_PHY_CTL1_REG 0x1704
|
|
#define RCAR_GEN2_PHY_CTL1 0x34180002
|
|
#define RCAR_GEN2_PHY_CTL1_SS 0xC180 /* Spread Spectrum */
|
|
|
|
#define RCAR_GEN2_PHY_CTL2_REG 0x170C
|
|
#define RCAR_GEN2_PHY_CTL2 0x00002303
|
|
|
|
#define RCAR_GEN2_PHY_CTL3_REG 0x171C
|
|
#define RCAR_GEN2_PHY_CTL3 0x000B0194
|
|
|
|
#define RCAR_GEN2_PHY_CTL4_REG 0x1724
|
|
#define RCAR_GEN2_PHY_CTL4 0x00030994
|
|
|
|
#define RCAR_GEN2_PHY_CTL5_REG 0x1740
|
|
#define RCAR_GEN2_PHY_CTL5 0x03004001
|
|
#define RCAR_GEN2_PHY_CTL5_DC BIT(1) /* DC connection */
|
|
#define RCAR_GEN2_PHY_CTL5_TR BIT(2) /* Termination Resistor */
|
|
|
|
enum sata_rcar_type {
|
|
RCAR_GEN1_SATA,
|
|
RCAR_GEN2_SATA,
|
|
RCAR_GEN3_SATA,
|
|
RCAR_R8A7790_ES1_SATA,
|
|
};
|
|
|
|
struct sata_rcar_priv {
|
|
void __iomem *base;
|
|
u32 sataint_mask;
|
|
enum sata_rcar_type type;
|
|
};
|
|
|
|
static void sata_rcar_gen1_phy_preinit(struct sata_rcar_priv *priv)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
|
|
/* idle state */
|
|
iowrite32(0, base + SATAPHYADDR_REG);
|
|
/* reset */
|
|
iowrite32(SATAPHYRESET_PHYRST, base + SATAPHYRESET_REG);
|
|
udelay(10);
|
|
/* deassert reset */
|
|
iowrite32(0, base + SATAPHYRESET_REG);
|
|
}
|
|
|
|
static void sata_rcar_gen1_phy_write(struct sata_rcar_priv *priv, u16 reg,
|
|
u32 val, int group)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
int timeout;
|
|
|
|
/* deassert reset */
|
|
iowrite32(0, base + SATAPHYRESET_REG);
|
|
/* lane 1 */
|
|
iowrite32(SATAPHYACCEN_PHYLANE, base + SATAPHYACCEN_REG);
|
|
/* write phy register value */
|
|
iowrite32(val, base + SATAPHYWDATA_REG);
|
|
/* set register group */
|
|
if (group)
|
|
reg |= SATAPHYADDR_PHYRATEMODE;
|
|
/* write command */
|
|
iowrite32(SATAPHYADDR_PHYCMD_WRITE | reg, base + SATAPHYADDR_REG);
|
|
/* wait for ack */
|
|
for (timeout = 0; timeout < 100; timeout++) {
|
|
val = ioread32(base + SATAPHYACK_REG);
|
|
if (val & SATAPHYACK_PHYACK)
|
|
break;
|
|
}
|
|
if (timeout >= 100)
|
|
pr_err("%s timeout\n", __func__);
|
|
/* idle state */
|
|
iowrite32(0, base + SATAPHYADDR_REG);
|
|
}
|
|
|
|
static void sata_rcar_gen1_phy_init(struct sata_rcar_priv *priv)
|
|
{
|
|
sata_rcar_gen1_phy_preinit(priv);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0);
|
|
}
|
|
|
|
static void sata_rcar_gen2_phy_init(struct sata_rcar_priv *priv)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
|
|
iowrite32(RCAR_GEN2_PHY_CTL1, base + RCAR_GEN2_PHY_CTL1_REG);
|
|
iowrite32(RCAR_GEN2_PHY_CTL2, base + RCAR_GEN2_PHY_CTL2_REG);
|
|
iowrite32(RCAR_GEN2_PHY_CTL3, base + RCAR_GEN2_PHY_CTL3_REG);
|
|
iowrite32(RCAR_GEN2_PHY_CTL4, base + RCAR_GEN2_PHY_CTL4_REG);
|
|
iowrite32(RCAR_GEN2_PHY_CTL5 | RCAR_GEN2_PHY_CTL5_DC |
|
|
RCAR_GEN2_PHY_CTL5_TR, base + RCAR_GEN2_PHY_CTL5_REG);
|
|
}
|
|
|
|
static void sata_rcar_freeze(struct ata_port *ap)
|
|
{
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
|
|
/* mask */
|
|
iowrite32(priv->sataint_mask, priv->base + SATAINTMASK_REG);
|
|
|
|
ata_sff_freeze(ap);
|
|
}
|
|
|
|
static void sata_rcar_thaw(struct ata_port *ap)
|
|
{
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
void __iomem *base = priv->base;
|
|
|
|
/* ack */
|
|
iowrite32(~(u32)SATA_RCAR_INT_MASK, base + SATAINTSTAT_REG);
|
|
|
|
ata_sff_thaw(ap);
|
|
|
|
/* unmask */
|
|
iowrite32(priv->sataint_mask & ~SATA_RCAR_INT_MASK, base + SATAINTMASK_REG);
|
|
}
|
|
|
|
static void sata_rcar_ioread16_rep(void __iomem *reg, void *buffer, int count)
|
|
{
|
|
u16 *ptr = buffer;
|
|
|
|
while (count--) {
|
|
u16 data = ioread32(reg);
|
|
|
|
*ptr++ = data;
|
|
}
|
|
}
|
|
|
|
static void sata_rcar_iowrite16_rep(void __iomem *reg, void *buffer, int count)
|
|
{
|
|
const u16 *ptr = buffer;
|
|
|
|
while (count--)
|
|
iowrite32(*ptr++, reg);
|
|
}
|
|
|
|
static u8 sata_rcar_check_status(struct ata_port *ap)
|
|
{
|
|
return ioread32(ap->ioaddr.status_addr);
|
|
}
|
|
|
|
static u8 sata_rcar_check_altstatus(struct ata_port *ap)
|
|
{
|
|
return ioread32(ap->ioaddr.altstatus_addr);
|
|
}
|
|
|
|
static void sata_rcar_set_devctl(struct ata_port *ap, u8 ctl)
|
|
{
|
|
iowrite32(ctl, ap->ioaddr.ctl_addr);
|
|
}
|
|
|
|
static void sata_rcar_dev_select(struct ata_port *ap, unsigned int device)
|
|
{
|
|
iowrite32(ATA_DEVICE_OBS, ap->ioaddr.device_addr);
|
|
ata_sff_pause(ap); /* needed; also flushes, for mmio */
|
|
}
|
|
|
|
static unsigned int sata_rcar_ata_devchk(struct ata_port *ap,
|
|
unsigned int device)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
u8 nsect, lbal;
|
|
|
|
sata_rcar_dev_select(ap, device);
|
|
|
|
iowrite32(0x55, ioaddr->nsect_addr);
|
|
iowrite32(0xaa, ioaddr->lbal_addr);
|
|
|
|
iowrite32(0xaa, ioaddr->nsect_addr);
|
|
iowrite32(0x55, ioaddr->lbal_addr);
|
|
|
|
iowrite32(0x55, ioaddr->nsect_addr);
|
|
iowrite32(0xaa, ioaddr->lbal_addr);
|
|
|
|
nsect = ioread32(ioaddr->nsect_addr);
|
|
lbal = ioread32(ioaddr->lbal_addr);
|
|
|
|
if (nsect == 0x55 && lbal == 0xaa)
|
|
return 1; /* found a device */
|
|
|
|
return 0; /* nothing found */
|
|
}
|
|
|
|
static int sata_rcar_wait_after_reset(struct ata_link *link,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
|
|
ata_msleep(ap, ATA_WAIT_AFTER_RESET);
|
|
|
|
return ata_sff_wait_ready(link, deadline);
|
|
}
|
|
|
|
static int sata_rcar_bus_softreset(struct ata_port *ap, unsigned long deadline)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
|
|
|
|
/* software reset. causes dev0 to be selected */
|
|
iowrite32(ap->ctl, ioaddr->ctl_addr);
|
|
udelay(20);
|
|
iowrite32(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
|
|
udelay(20);
|
|
iowrite32(ap->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = ap->ctl;
|
|
|
|
/* wait the port to become ready */
|
|
return sata_rcar_wait_after_reset(&ap->link, deadline);
|
|
}
|
|
|
|
static int sata_rcar_softreset(struct ata_link *link, unsigned int *classes,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
unsigned int devmask = 0;
|
|
int rc;
|
|
u8 err;
|
|
|
|
/* determine if device 0 is present */
|
|
if (sata_rcar_ata_devchk(ap, 0))
|
|
devmask |= 1 << 0;
|
|
|
|
/* issue bus reset */
|
|
DPRINTK("about to softreset, devmask=%x\n", devmask);
|
|
rc = sata_rcar_bus_softreset(ap, deadline);
|
|
/* if link is occupied, -ENODEV too is an error */
|
|
if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
|
|
ata_link_err(link, "SRST failed (errno=%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
/* determine by signature whether we have ATA or ATAPI devices */
|
|
classes[0] = ata_sff_dev_classify(&link->device[0], devmask, &err);
|
|
|
|
DPRINTK("classes[0]=%u\n", classes[0]);
|
|
return 0;
|
|
}
|
|
|
|
static void sata_rcar_tf_load(struct ata_port *ap,
|
|
const struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
|
|
|
|
if (tf->ctl != ap->last_ctl) {
|
|
iowrite32(tf->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = tf->ctl;
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
|
|
iowrite32(tf->hob_feature, ioaddr->feature_addr);
|
|
iowrite32(tf->hob_nsect, ioaddr->nsect_addr);
|
|
iowrite32(tf->hob_lbal, ioaddr->lbal_addr);
|
|
iowrite32(tf->hob_lbam, ioaddr->lbam_addr);
|
|
iowrite32(tf->hob_lbah, ioaddr->lbah_addr);
|
|
VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
|
|
tf->hob_feature,
|
|
tf->hob_nsect,
|
|
tf->hob_lbal,
|
|
tf->hob_lbam,
|
|
tf->hob_lbah);
|
|
}
|
|
|
|
if (is_addr) {
|
|
iowrite32(tf->feature, ioaddr->feature_addr);
|
|
iowrite32(tf->nsect, ioaddr->nsect_addr);
|
|
iowrite32(tf->lbal, ioaddr->lbal_addr);
|
|
iowrite32(tf->lbam, ioaddr->lbam_addr);
|
|
iowrite32(tf->lbah, ioaddr->lbah_addr);
|
|
VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
|
|
tf->feature,
|
|
tf->nsect,
|
|
tf->lbal,
|
|
tf->lbam,
|
|
tf->lbah);
|
|
}
|
|
|
|
if (tf->flags & ATA_TFLAG_DEVICE) {
|
|
iowrite32(tf->device, ioaddr->device_addr);
|
|
VPRINTK("device 0x%X\n", tf->device);
|
|
}
|
|
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
static void sata_rcar_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
tf->command = sata_rcar_check_status(ap);
|
|
tf->feature = ioread32(ioaddr->error_addr);
|
|
tf->nsect = ioread32(ioaddr->nsect_addr);
|
|
tf->lbal = ioread32(ioaddr->lbal_addr);
|
|
tf->lbam = ioread32(ioaddr->lbam_addr);
|
|
tf->lbah = ioread32(ioaddr->lbah_addr);
|
|
tf->device = ioread32(ioaddr->device_addr);
|
|
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
iowrite32(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
|
|
tf->hob_feature = ioread32(ioaddr->error_addr);
|
|
tf->hob_nsect = ioread32(ioaddr->nsect_addr);
|
|
tf->hob_lbal = ioread32(ioaddr->lbal_addr);
|
|
tf->hob_lbam = ioread32(ioaddr->lbam_addr);
|
|
tf->hob_lbah = ioread32(ioaddr->lbah_addr);
|
|
iowrite32(tf->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = tf->ctl;
|
|
}
|
|
}
|
|
|
|
static void sata_rcar_exec_command(struct ata_port *ap,
|
|
const struct ata_taskfile *tf)
|
|
{
|
|
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
|
|
|
|
iowrite32(tf->command, ap->ioaddr.command_addr);
|
|
ata_sff_pause(ap);
|
|
}
|
|
|
|
static unsigned int sata_rcar_data_xfer(struct ata_queued_cmd *qc,
|
|
unsigned char *buf,
|
|
unsigned int buflen, int rw)
|
|
{
|
|
struct ata_port *ap = qc->dev->link->ap;
|
|
void __iomem *data_addr = ap->ioaddr.data_addr;
|
|
unsigned int words = buflen >> 1;
|
|
|
|
/* Transfer multiple of 2 bytes */
|
|
if (rw == READ)
|
|
sata_rcar_ioread16_rep(data_addr, buf, words);
|
|
else
|
|
sata_rcar_iowrite16_rep(data_addr, buf, words);
|
|
|
|
/* Transfer trailing byte, if any. */
|
|
if (unlikely(buflen & 0x01)) {
|
|
unsigned char pad[2] = { };
|
|
|
|
/* Point buf to the tail of buffer */
|
|
buf += buflen - 1;
|
|
|
|
/*
|
|
* Use io*16_rep() accessors here as well to avoid pointlessly
|
|
* swapping bytes to and from on the big endian machines...
|
|
*/
|
|
if (rw == READ) {
|
|
sata_rcar_ioread16_rep(data_addr, pad, 1);
|
|
*buf = pad[0];
|
|
} else {
|
|
pad[0] = *buf;
|
|
sata_rcar_iowrite16_rep(data_addr, pad, 1);
|
|
}
|
|
words++;
|
|
}
|
|
|
|
return words << 1;
|
|
}
|
|
|
|
static void sata_rcar_drain_fifo(struct ata_queued_cmd *qc)
|
|
{
|
|
int count;
|
|
struct ata_port *ap;
|
|
|
|
/* We only need to flush incoming data when a command was running */
|
|
if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
|
|
return;
|
|
|
|
ap = qc->ap;
|
|
/* Drain up to 64K of data before we give up this recovery method */
|
|
for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) &&
|
|
count < 65536; count += 2)
|
|
ioread32(ap->ioaddr.data_addr);
|
|
|
|
/* Can become DEBUG later */
|
|
if (count)
|
|
ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count);
|
|
}
|
|
|
|
static int sata_rcar_scr_read(struct ata_link *link, unsigned int sc_reg,
|
|
u32 *val)
|
|
{
|
|
if (sc_reg > SCR_ACTIVE)
|
|
return -EINVAL;
|
|
|
|
*val = ioread32(link->ap->ioaddr.scr_addr + (sc_reg << 2));
|
|
return 0;
|
|
}
|
|
|
|
static int sata_rcar_scr_write(struct ata_link *link, unsigned int sc_reg,
|
|
u32 val)
|
|
{
|
|
if (sc_reg > SCR_ACTIVE)
|
|
return -EINVAL;
|
|
|
|
iowrite32(val, link->ap->ioaddr.scr_addr + (sc_reg << 2));
|
|
return 0;
|
|
}
|
|
|
|
static void sata_rcar_bmdma_fill_sg(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_bmdma_prd *prd = ap->bmdma_prd;
|
|
struct scatterlist *sg;
|
|
unsigned int si;
|
|
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
u32 addr, sg_len;
|
|
|
|
/*
|
|
* Note: h/w doesn't support 64-bit, so we unconditionally
|
|
* truncate dma_addr_t to u32.
|
|
*/
|
|
addr = (u32)sg_dma_address(sg);
|
|
sg_len = sg_dma_len(sg);
|
|
|
|
prd[si].addr = cpu_to_le32(addr);
|
|
prd[si].flags_len = cpu_to_le32(sg_len);
|
|
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len);
|
|
}
|
|
|
|
/* end-of-table flag */
|
|
prd[si - 1].addr |= cpu_to_le32(SATA_RCAR_DTEND);
|
|
}
|
|
|
|
static void sata_rcar_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
|
|
return;
|
|
|
|
sata_rcar_bmdma_fill_sg(qc);
|
|
}
|
|
|
|
static void sata_rcar_bmdma_setup(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
unsigned int rw = qc->tf.flags & ATA_TFLAG_WRITE;
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
void __iomem *base = priv->base;
|
|
u32 dmactl;
|
|
|
|
/* load PRD table addr. */
|
|
mb(); /* make sure PRD table writes are visible to controller */
|
|
iowrite32(ap->bmdma_prd_dma, base + ATAPI_DTB_ADR_REG);
|
|
|
|
/* specify data direction, triple-check start bit is clear */
|
|
dmactl = ioread32(base + ATAPI_CONTROL1_REG);
|
|
dmactl &= ~(ATAPI_CONTROL1_RW | ATAPI_CONTROL1_STOP);
|
|
if (dmactl & ATAPI_CONTROL1_START) {
|
|
dmactl &= ~ATAPI_CONTROL1_START;
|
|
dmactl |= ATAPI_CONTROL1_STOP;
|
|
}
|
|
if (!rw)
|
|
dmactl |= ATAPI_CONTROL1_RW;
|
|
iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
|
|
|
|
/* issue r/w command */
|
|
ap->ops->sff_exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
void __iomem *base = priv->base;
|
|
u32 dmactl;
|
|
|
|
/* start host DMA transaction */
|
|
dmactl = ioread32(base + ATAPI_CONTROL1_REG);
|
|
dmactl &= ~ATAPI_CONTROL1_STOP;
|
|
dmactl |= ATAPI_CONTROL1_START;
|
|
iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
|
|
}
|
|
|
|
static void sata_rcar_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
void __iomem *base = priv->base;
|
|
u32 dmactl;
|
|
|
|
/* force termination of DMA transfer if active */
|
|
dmactl = ioread32(base + ATAPI_CONTROL1_REG);
|
|
if (dmactl & ATAPI_CONTROL1_START) {
|
|
dmactl &= ~ATAPI_CONTROL1_START;
|
|
dmactl |= ATAPI_CONTROL1_STOP;
|
|
iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
|
|
}
|
|
|
|
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
|
|
ata_sff_dma_pause(ap);
|
|
}
|
|
|
|
static u8 sata_rcar_bmdma_status(struct ata_port *ap)
|
|
{
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
u8 host_stat = 0;
|
|
u32 status;
|
|
|
|
status = ioread32(priv->base + ATAPI_STATUS_REG);
|
|
if (status & ATAPI_STATUS_DEVINT)
|
|
host_stat |= ATA_DMA_INTR;
|
|
if (status & ATAPI_STATUS_ACT)
|
|
host_stat |= ATA_DMA_ACTIVE;
|
|
|
|
return host_stat;
|
|
}
|
|
|
|
static struct scsi_host_template sata_rcar_sht = {
|
|
ATA_BASE_SHT(DRV_NAME),
|
|
/*
|
|
* This controller allows transfer chunks up to 512MB which cross 64KB
|
|
* boundaries, therefore the DMA limits are more relaxed than standard
|
|
* ATA SFF.
|
|
*/
|
|
.sg_tablesize = ATA_MAX_PRD,
|
|
.dma_boundary = SATA_RCAR_DMA_BOUNDARY,
|
|
};
|
|
|
|
static struct ata_port_operations sata_rcar_port_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
|
|
.freeze = sata_rcar_freeze,
|
|
.thaw = sata_rcar_thaw,
|
|
.softreset = sata_rcar_softreset,
|
|
|
|
.scr_read = sata_rcar_scr_read,
|
|
.scr_write = sata_rcar_scr_write,
|
|
|
|
.sff_dev_select = sata_rcar_dev_select,
|
|
.sff_set_devctl = sata_rcar_set_devctl,
|
|
.sff_check_status = sata_rcar_check_status,
|
|
.sff_check_altstatus = sata_rcar_check_altstatus,
|
|
.sff_tf_load = sata_rcar_tf_load,
|
|
.sff_tf_read = sata_rcar_tf_read,
|
|
.sff_exec_command = sata_rcar_exec_command,
|
|
.sff_data_xfer = sata_rcar_data_xfer,
|
|
.sff_drain_fifo = sata_rcar_drain_fifo,
|
|
|
|
.qc_prep = sata_rcar_qc_prep,
|
|
|
|
.bmdma_setup = sata_rcar_bmdma_setup,
|
|
.bmdma_start = sata_rcar_bmdma_start,
|
|
.bmdma_stop = sata_rcar_bmdma_stop,
|
|
.bmdma_status = sata_rcar_bmdma_status,
|
|
};
|
|
|
|
static void sata_rcar_serr_interrupt(struct ata_port *ap)
|
|
{
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
int freeze = 0;
|
|
u32 serror;
|
|
|
|
serror = ioread32(priv->base + SCRSERR_REG);
|
|
if (!serror)
|
|
return;
|
|
|
|
DPRINTK("SError @host_intr: 0x%x\n", serror);
|
|
|
|
/* first, analyze and record host port events */
|
|
ata_ehi_clear_desc(ehi);
|
|
|
|
if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) {
|
|
/* Setup a soft-reset EH action */
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, "%s", "hotplug");
|
|
|
|
freeze = serror & SERR_COMM_WAKE ? 0 : 1;
|
|
}
|
|
|
|
/* freeze or abort */
|
|
if (freeze)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static void sata_rcar_ata_interrupt(struct ata_port *ap)
|
|
{
|
|
struct ata_queued_cmd *qc;
|
|
int handled = 0;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc)
|
|
handled |= ata_bmdma_port_intr(ap, qc);
|
|
|
|
/* be sure to clear ATA interrupt */
|
|
if (!handled)
|
|
sata_rcar_check_status(ap);
|
|
}
|
|
|
|
static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
unsigned int handled = 0;
|
|
struct ata_port *ap;
|
|
u32 sataintstat;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
sataintstat = ioread32(base + SATAINTSTAT_REG);
|
|
sataintstat &= SATA_RCAR_INT_MASK;
|
|
if (!sataintstat)
|
|
goto done;
|
|
/* ack */
|
|
iowrite32(~sataintstat & priv->sataint_mask, base + SATAINTSTAT_REG);
|
|
|
|
ap = host->ports[0];
|
|
|
|
if (sataintstat & SATAINTSTAT_ATA)
|
|
sata_rcar_ata_interrupt(ap);
|
|
|
|
if (sataintstat & SATAINTSTAT_SERR)
|
|
sata_rcar_serr_interrupt(ap);
|
|
|
|
handled = 1;
|
|
done:
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void sata_rcar_setup_port(struct ata_host *host)
|
|
{
|
|
struct ata_port *ap = host->ports[0];
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
|
|
ap->ops = &sata_rcar_port_ops;
|
|
ap->pio_mask = ATA_PIO4;
|
|
ap->udma_mask = ATA_UDMA6;
|
|
ap->flags |= ATA_FLAG_SATA;
|
|
|
|
if (priv->type == RCAR_R8A7790_ES1_SATA)
|
|
ap->flags |= ATA_FLAG_NO_DIPM;
|
|
|
|
ioaddr->cmd_addr = base + SDATA_REG;
|
|
ioaddr->ctl_addr = base + SSDEVCON_REG;
|
|
ioaddr->scr_addr = base + SCRSSTS_REG;
|
|
ioaddr->altstatus_addr = ioaddr->ctl_addr;
|
|
|
|
ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << 2);
|
|
ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << 2);
|
|
ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << 2);
|
|
ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << 2);
|
|
ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << 2);
|
|
ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << 2);
|
|
ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << 2);
|
|
ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << 2);
|
|
ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << 2);
|
|
ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2);
|
|
}
|
|
|
|
static void sata_rcar_init_module(struct sata_rcar_priv *priv)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
u32 val;
|
|
|
|
/* SATA-IP reset state */
|
|
val = ioread32(base + ATAPI_CONTROL1_REG);
|
|
val |= ATAPI_CONTROL1_RESET;
|
|
iowrite32(val, base + ATAPI_CONTROL1_REG);
|
|
|
|
/* ISM mode, PRD mode, DTEND flag at bit 0 */
|
|
val = ioread32(base + ATAPI_CONTROL1_REG);
|
|
val |= ATAPI_CONTROL1_ISM;
|
|
val |= ATAPI_CONTROL1_DESE;
|
|
val |= ATAPI_CONTROL1_DTA32M;
|
|
iowrite32(val, base + ATAPI_CONTROL1_REG);
|
|
|
|
/* Release the SATA-IP from the reset state */
|
|
val = ioread32(base + ATAPI_CONTROL1_REG);
|
|
val &= ~ATAPI_CONTROL1_RESET;
|
|
iowrite32(val, base + ATAPI_CONTROL1_REG);
|
|
|
|
/* ack and mask */
|
|
iowrite32(0, base + SATAINTSTAT_REG);
|
|
iowrite32(priv->sataint_mask, base + SATAINTMASK_REG);
|
|
|
|
/* enable interrupts */
|
|
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
|
|
}
|
|
|
|
static void sata_rcar_init_controller(struct ata_host *host)
|
|
{
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
|
|
priv->sataint_mask = SATAINTMASK_ALL_GEN2;
|
|
|
|
/* reset and setup phy */
|
|
switch (priv->type) {
|
|
case RCAR_GEN1_SATA:
|
|
priv->sataint_mask = SATAINTMASK_ALL_GEN1;
|
|
sata_rcar_gen1_phy_init(priv);
|
|
break;
|
|
case RCAR_GEN2_SATA:
|
|
case RCAR_R8A7790_ES1_SATA:
|
|
sata_rcar_gen2_phy_init(priv);
|
|
break;
|
|
case RCAR_GEN3_SATA:
|
|
break;
|
|
default:
|
|
dev_warn(host->dev, "SATA phy is not initialized\n");
|
|
break;
|
|
}
|
|
|
|
sata_rcar_init_module(priv);
|
|
}
|
|
|
|
static const struct of_device_id sata_rcar_match[] = {
|
|
{
|
|
/* Deprecated by "renesas,sata-r8a7779" */
|
|
.compatible = "renesas,rcar-sata",
|
|
.data = (void *)RCAR_GEN1_SATA,
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7779",
|
|
.data = (void *)RCAR_GEN1_SATA,
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7790",
|
|
.data = (void *)RCAR_GEN2_SATA
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7790-es1",
|
|
.data = (void *)RCAR_R8A7790_ES1_SATA
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7791",
|
|
.data = (void *)RCAR_GEN2_SATA
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7793",
|
|
.data = (void *)RCAR_GEN2_SATA
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7795",
|
|
.data = (void *)RCAR_GEN3_SATA
|
|
},
|
|
{
|
|
.compatible = "renesas,rcar-gen2-sata",
|
|
.data = (void *)RCAR_GEN2_SATA
|
|
},
|
|
{
|
|
.compatible = "renesas,rcar-gen3-sata",
|
|
.data = (void *)RCAR_GEN3_SATA
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sata_rcar_match);
|
|
|
|
static int sata_rcar_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ata_host *host;
|
|
struct sata_rcar_priv *priv;
|
|
struct resource *mem;
|
|
int irq;
|
|
int ret = 0;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
if (!irq)
|
|
return -EINVAL;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(struct sata_rcar_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->type = (enum sata_rcar_type)of_device_get_match_data(dev);
|
|
|
|
pm_runtime_enable(dev);
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0)
|
|
goto err_pm_disable;
|
|
|
|
host = ata_host_alloc(dev, 1);
|
|
if (!host) {
|
|
ret = -ENOMEM;
|
|
goto err_pm_put;
|
|
}
|
|
|
|
host->private_data = priv;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->base = devm_ioremap_resource(dev, mem);
|
|
if (IS_ERR(priv->base)) {
|
|
ret = PTR_ERR(priv->base);
|
|
goto err_pm_put;
|
|
}
|
|
|
|
/* setup port */
|
|
sata_rcar_setup_port(host);
|
|
|
|
/* initialize host controller */
|
|
sata_rcar_init_controller(host);
|
|
|
|
ret = ata_host_activate(host, irq, sata_rcar_interrupt, 0,
|
|
&sata_rcar_sht);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
err_pm_put:
|
|
pm_runtime_put(dev);
|
|
err_pm_disable:
|
|
pm_runtime_disable(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int sata_rcar_remove(struct platform_device *pdev)
|
|
{
|
|
struct ata_host *host = platform_get_drvdata(pdev);
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
|
|
ata_host_detach(host);
|
|
|
|
/* disable interrupts */
|
|
iowrite32(0, base + ATAPI_INT_ENABLE_REG);
|
|
/* ack and mask */
|
|
iowrite32(0, base + SATAINTSTAT_REG);
|
|
iowrite32(priv->sataint_mask, base + SATAINTMASK_REG);
|
|
|
|
pm_runtime_put(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sata_rcar_suspend(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
int ret;
|
|
|
|
ret = ata_host_suspend(host, PMSG_SUSPEND);
|
|
if (!ret) {
|
|
/* disable interrupts */
|
|
iowrite32(0, base + ATAPI_INT_ENABLE_REG);
|
|
/* mask */
|
|
iowrite32(priv->sataint_mask, base + SATAINTMASK_REG);
|
|
|
|
pm_runtime_put(dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sata_rcar_resume(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (priv->type == RCAR_GEN3_SATA) {
|
|
sata_rcar_init_module(priv);
|
|
} else {
|
|
/* ack and mask */
|
|
iowrite32(0, base + SATAINTSTAT_REG);
|
|
iowrite32(priv->sataint_mask, base + SATAINTMASK_REG);
|
|
|
|
/* enable interrupts */
|
|
iowrite32(ATAPI_INT_ENABLE_SATAINT,
|
|
base + ATAPI_INT_ENABLE_REG);
|
|
}
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sata_rcar_restore(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
sata_rcar_setup_port(host);
|
|
|
|
/* initialize host controller */
|
|
sata_rcar_init_controller(host);
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops sata_rcar_pm_ops = {
|
|
.suspend = sata_rcar_suspend,
|
|
.resume = sata_rcar_resume,
|
|
.freeze = sata_rcar_suspend,
|
|
.thaw = sata_rcar_resume,
|
|
.poweroff = sata_rcar_suspend,
|
|
.restore = sata_rcar_restore,
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver sata_rcar_driver = {
|
|
.probe = sata_rcar_probe,
|
|
.remove = sata_rcar_remove,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = sata_rcar_match,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.pm = &sata_rcar_pm_ops,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sata_rcar_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Vladimir Barinov");
|
|
MODULE_DESCRIPTION("Renesas R-Car SATA controller low level driver");
|