mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
0585244523
Generic clock rate needs to be set in case it was selected as timer clock
source in mchp_pit64b_init_mode(). Otherwise it will be enabled with wrong
rate.
Fixes: 625022a5f1
("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1584352376-32585-1-git-send-email-claudiu.beznea@microchip.com
453 lines
12 KiB
C
453 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* 64-bit Periodic Interval Timer driver
|
|
*
|
|
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
|
|
*
|
|
* Author: Claudiu Beznea <claudiu.beznea@microchip.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/sched_clock.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define MCHP_PIT64B_CR 0x00 /* Control Register */
|
|
#define MCHP_PIT64B_CR_START BIT(0)
|
|
#define MCHP_PIT64B_CR_SWRST BIT(8)
|
|
|
|
#define MCHP_PIT64B_MR 0x04 /* Mode Register */
|
|
#define MCHP_PIT64B_MR_CONT BIT(0)
|
|
#define MCHP_PIT64B_MR_ONE_SHOT (0)
|
|
#define MCHP_PIT64B_MR_SGCLK BIT(3)
|
|
#define MCHP_PIT64B_MR_PRES GENMASK(11, 8)
|
|
|
|
#define MCHP_PIT64B_LSB_PR 0x08 /* LSB Period Register */
|
|
|
|
#define MCHP_PIT64B_MSB_PR 0x0C /* MSB Period Register */
|
|
|
|
#define MCHP_PIT64B_IER 0x10 /* Interrupt Enable Register */
|
|
#define MCHP_PIT64B_IER_PERIOD BIT(0)
|
|
|
|
#define MCHP_PIT64B_ISR 0x1C /* Interrupt Status Register */
|
|
|
|
#define MCHP_PIT64B_TLSBR 0x20 /* Timer LSB Register */
|
|
|
|
#define MCHP_PIT64B_TMSBR 0x24 /* Timer MSB Register */
|
|
|
|
#define MCHP_PIT64B_PRES_MAX 0x10
|
|
#define MCHP_PIT64B_LSBMASK GENMASK_ULL(31, 0)
|
|
#define MCHP_PIT64B_PRES_TO_MODE(p) (MCHP_PIT64B_MR_PRES & ((p) << 8))
|
|
#define MCHP_PIT64B_MODE_TO_PRES(m) ((MCHP_PIT64B_MR_PRES & (m)) >> 8)
|
|
#define MCHP_PIT64B_DEF_CS_FREQ 5000000UL /* 5 MHz */
|
|
#define MCHP_PIT64B_DEF_CE_FREQ 32768 /* 32 KHz */
|
|
|
|
#define MCHP_PIT64B_NAME "pit64b"
|
|
|
|
/**
|
|
* struct mchp_pit64b_timer - PIT64B timer data structure
|
|
* @base: base address of PIT64B hardware block
|
|
* @pclk: PIT64B's peripheral clock
|
|
* @gclk: PIT64B's generic clock
|
|
* @mode: precomputed value for mode register
|
|
*/
|
|
struct mchp_pit64b_timer {
|
|
void __iomem *base;
|
|
struct clk *pclk;
|
|
struct clk *gclk;
|
|
u32 mode;
|
|
};
|
|
|
|
/**
|
|
* mchp_pit64b_clkevt - PIT64B clockevent data structure
|
|
* @timer: PIT64B timer
|
|
* @clkevt: clockevent
|
|
*/
|
|
struct mchp_pit64b_clkevt {
|
|
struct mchp_pit64b_timer timer;
|
|
struct clock_event_device clkevt;
|
|
};
|
|
|
|
#define to_mchp_pit64b_timer(x) \
|
|
((struct mchp_pit64b_timer *)container_of(x,\
|
|
struct mchp_pit64b_clkevt, clkevt))
|
|
|
|
/* Base address for clocksource timer. */
|
|
static void __iomem *mchp_pit64b_cs_base;
|
|
/* Default cycles for clockevent timer. */
|
|
static u64 mchp_pit64b_ce_cycles;
|
|
|
|
static inline u64 mchp_pit64b_cnt_read(void __iomem *base)
|
|
{
|
|
unsigned long flags;
|
|
u32 low, high;
|
|
|
|
raw_local_irq_save(flags);
|
|
|
|
/*
|
|
* When using a 64 bit period TLSB must be read first, followed by the
|
|
* read of TMSB. This sequence generates an atomic read of the 64 bit
|
|
* timer value whatever the lapse of time between the accesses.
|
|
*/
|
|
low = readl_relaxed(base + MCHP_PIT64B_TLSBR);
|
|
high = readl_relaxed(base + MCHP_PIT64B_TMSBR);
|
|
|
|
raw_local_irq_restore(flags);
|
|
|
|
return (((u64)high << 32) | low);
|
|
}
|
|
|
|
static inline void mchp_pit64b_reset(struct mchp_pit64b_timer *timer,
|
|
u64 cycles, u32 mode, u32 irqs)
|
|
{
|
|
u32 low, high;
|
|
|
|
low = cycles & MCHP_PIT64B_LSBMASK;
|
|
high = cycles >> 32;
|
|
|
|
writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
|
|
writel_relaxed(mode | timer->mode, timer->base + MCHP_PIT64B_MR);
|
|
writel_relaxed(high, timer->base + MCHP_PIT64B_MSB_PR);
|
|
writel_relaxed(low, timer->base + MCHP_PIT64B_LSB_PR);
|
|
writel_relaxed(irqs, timer->base + MCHP_PIT64B_IER);
|
|
writel_relaxed(MCHP_PIT64B_CR_START, timer->base + MCHP_PIT64B_CR);
|
|
}
|
|
|
|
static u64 mchp_pit64b_clksrc_read(struct clocksource *cs)
|
|
{
|
|
return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
|
|
}
|
|
|
|
static u64 mchp_pit64b_sched_read_clk(void)
|
|
{
|
|
return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
|
|
}
|
|
|
|
static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
|
|
{
|
|
struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
|
|
|
|
writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
|
|
{
|
|
struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
|
|
|
|
mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT,
|
|
MCHP_PIT64B_IER_PERIOD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
|
|
struct clock_event_device *cedev)
|
|
{
|
|
struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
|
|
|
|
mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
|
|
MCHP_PIT64B_IER_PERIOD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev)
|
|
{
|
|
struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
|
|
|
|
writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
|
|
if (timer->mode & MCHP_PIT64B_MR_SGCLK)
|
|
clk_disable_unprepare(timer->gclk);
|
|
clk_disable_unprepare(timer->pclk);
|
|
}
|
|
|
|
static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev)
|
|
{
|
|
struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
|
|
|
|
clk_prepare_enable(timer->pclk);
|
|
if (timer->mode & MCHP_PIT64B_MR_SGCLK)
|
|
clk_prepare_enable(timer->gclk);
|
|
}
|
|
|
|
static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mchp_pit64b_clkevt *irq_data = dev_id;
|
|
|
|
/* Need to clear the interrupt. */
|
|
readl_relaxed(irq_data->timer.base + MCHP_PIT64B_ISR);
|
|
|
|
irq_data->clkevt.event_handler(&irq_data->clkevt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void __init mchp_pit64b_pres_compute(u32 *pres, u32 clk_rate,
|
|
u32 max_rate)
|
|
{
|
|
u32 tmp;
|
|
|
|
for (*pres = 0; *pres < MCHP_PIT64B_PRES_MAX; (*pres)++) {
|
|
tmp = clk_rate / (*pres + 1);
|
|
if (tmp <= max_rate)
|
|
break;
|
|
}
|
|
|
|
/* Use the bigest prescaler if we didn't match one. */
|
|
if (*pres == MCHP_PIT64B_PRES_MAX)
|
|
*pres = MCHP_PIT64B_PRES_MAX - 1;
|
|
}
|
|
|
|
/**
|
|
* mchp_pit64b_init_mode - prepare PIT64B mode register value to be used at
|
|
* runtime; this includes prescaler and SGCLK bit
|
|
*
|
|
* PIT64B timer may be fed by gclk or pclk. When gclk is used its rate has to
|
|
* be at least 3 times lower that pclk's rate. pclk rate is fixed, gclk rate
|
|
* could be changed via clock APIs. The chosen clock (pclk or gclk) could be
|
|
* divided by the internal PIT64B's divider.
|
|
*
|
|
* This function, first tries to use GCLK by requesting the desired rate from
|
|
* PMC and then using the internal PIT64B prescaler, if any, to reach the
|
|
* requested rate. If PCLK/GCLK < 3 (condition requested by PIT64B hardware)
|
|
* then the function falls back on using PCLK as clock source for PIT64B timer
|
|
* choosing the highest prescaler in case it doesn't locate one to match the
|
|
* requested frequency.
|
|
*
|
|
* Below is presented the PIT64B block in relation with PMC:
|
|
*
|
|
* PIT64B
|
|
* PMC +------------------------------------+
|
|
* +----+ | +-----+ |
|
|
* | |-->gclk -->|-->| | +---------+ +-----+ |
|
|
* | | | | MUX |--->| Divider |->|timer| |
|
|
* | |-->pclk -->|-->| | +---------+ +-----+ |
|
|
* +----+ | +-----+ |
|
|
* | ^ |
|
|
* | sel |
|
|
* +------------------------------------+
|
|
*
|
|
* Where:
|
|
* - gclk rate <= pclk rate/3
|
|
* - gclk rate could be requested from PMC
|
|
* - pclk rate is fixed (cannot be requested from PMC)
|
|
*/
|
|
static int __init mchp_pit64b_init_mode(struct mchp_pit64b_timer *timer,
|
|
unsigned long max_rate)
|
|
{
|
|
unsigned long pclk_rate, diff = 0, best_diff = ULONG_MAX;
|
|
long gclk_round = 0;
|
|
u32 pres, best_pres = 0;
|
|
|
|
pclk_rate = clk_get_rate(timer->pclk);
|
|
if (!pclk_rate)
|
|
return -EINVAL;
|
|
|
|
timer->mode = 0;
|
|
|
|
/* Try using GCLK. */
|
|
gclk_round = clk_round_rate(timer->gclk, max_rate);
|
|
if (gclk_round < 0)
|
|
goto pclk;
|
|
|
|
if (pclk_rate / gclk_round < 3)
|
|
goto pclk;
|
|
|
|
mchp_pit64b_pres_compute(&pres, gclk_round, max_rate);
|
|
best_diff = abs(gclk_round / (pres + 1) - max_rate);
|
|
best_pres = pres;
|
|
|
|
if (!best_diff) {
|
|
timer->mode |= MCHP_PIT64B_MR_SGCLK;
|
|
clk_set_rate(timer->gclk, gclk_round);
|
|
goto done;
|
|
}
|
|
|
|
pclk:
|
|
/* Check if requested rate could be obtained using PCLK. */
|
|
mchp_pit64b_pres_compute(&pres, pclk_rate, max_rate);
|
|
diff = abs(pclk_rate / (pres + 1) - max_rate);
|
|
|
|
if (best_diff > diff) {
|
|
/* Use PCLK. */
|
|
best_pres = pres;
|
|
} else {
|
|
/* Use GCLK. */
|
|
timer->mode |= MCHP_PIT64B_MR_SGCLK;
|
|
clk_set_rate(timer->gclk, gclk_round);
|
|
}
|
|
|
|
done:
|
|
timer->mode |= MCHP_PIT64B_PRES_TO_MODE(best_pres);
|
|
|
|
pr_info("PIT64B: using clk=%s with prescaler %u, freq=%lu [Hz]\n",
|
|
timer->mode & MCHP_PIT64B_MR_SGCLK ? "gclk" : "pclk", best_pres,
|
|
timer->mode & MCHP_PIT64B_MR_SGCLK ?
|
|
gclk_round / (best_pres + 1) : pclk_rate / (best_pres + 1));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer,
|
|
u32 clk_rate)
|
|
{
|
|
int ret;
|
|
|
|
mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
|
|
|
|
mchp_pit64b_cs_base = timer->base;
|
|
|
|
ret = clocksource_mmio_init(timer->base, MCHP_PIT64B_NAME, clk_rate,
|
|
210, 64, mchp_pit64b_clksrc_read);
|
|
if (ret) {
|
|
pr_debug("clksrc: Failed to register PIT64B clocksource!\n");
|
|
|
|
/* Stop timer. */
|
|
writel_relaxed(MCHP_PIT64B_CR_SWRST,
|
|
timer->base + MCHP_PIT64B_CR);
|
|
|
|
return ret;
|
|
}
|
|
|
|
sched_clock_register(mchp_pit64b_sched_read_clk, 64, clk_rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init mchp_pit64b_init_clkevt(struct mchp_pit64b_timer *timer,
|
|
u32 clk_rate, u32 irq)
|
|
{
|
|
struct mchp_pit64b_clkevt *ce;
|
|
int ret;
|
|
|
|
ce = kzalloc(sizeof(*ce), GFP_KERNEL);
|
|
if (!ce)
|
|
return -ENOMEM;
|
|
|
|
mchp_pit64b_ce_cycles = DIV_ROUND_CLOSEST(clk_rate, HZ);
|
|
|
|
ce->timer.base = timer->base;
|
|
ce->timer.pclk = timer->pclk;
|
|
ce->timer.gclk = timer->gclk;
|
|
ce->timer.mode = timer->mode;
|
|
ce->clkevt.name = MCHP_PIT64B_NAME;
|
|
ce->clkevt.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
|
|
ce->clkevt.rating = 150;
|
|
ce->clkevt.set_state_shutdown = mchp_pit64b_clkevt_shutdown;
|
|
ce->clkevt.set_state_periodic = mchp_pit64b_clkevt_set_periodic;
|
|
ce->clkevt.set_next_event = mchp_pit64b_clkevt_set_next_event;
|
|
ce->clkevt.suspend = mchp_pit64b_clkevt_suspend;
|
|
ce->clkevt.resume = mchp_pit64b_clkevt_resume;
|
|
ce->clkevt.cpumask = cpumask_of(0);
|
|
ce->clkevt.irq = irq;
|
|
|
|
ret = request_irq(irq, mchp_pit64b_interrupt, IRQF_TIMER,
|
|
"pit64b_tick", ce);
|
|
if (ret) {
|
|
pr_debug("clkevt: Failed to setup PIT64B IRQ\n");
|
|
kfree(ce);
|
|
return ret;
|
|
}
|
|
|
|
clockevents_config_and_register(&ce->clkevt, clk_rate, 1, ULONG_MAX);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
|
|
bool clkevt)
|
|
{
|
|
u32 freq = clkevt ? MCHP_PIT64B_DEF_CE_FREQ : MCHP_PIT64B_DEF_CS_FREQ;
|
|
struct mchp_pit64b_timer timer;
|
|
unsigned long clk_rate;
|
|
u32 irq = 0;
|
|
int ret;
|
|
|
|
/* Parse DT node. */
|
|
timer.pclk = of_clk_get_by_name(node, "pclk");
|
|
if (IS_ERR(timer.pclk))
|
|
return PTR_ERR(timer.pclk);
|
|
|
|
timer.gclk = of_clk_get_by_name(node, "gclk");
|
|
if (IS_ERR(timer.gclk))
|
|
return PTR_ERR(timer.gclk);
|
|
|
|
timer.base = of_iomap(node, 0);
|
|
if (!timer.base)
|
|
return -ENXIO;
|
|
|
|
if (clkevt) {
|
|
irq = irq_of_parse_and_map(node, 0);
|
|
if (!irq) {
|
|
ret = -ENODEV;
|
|
goto io_unmap;
|
|
}
|
|
}
|
|
|
|
/* Initialize mode (prescaler + SGCK bit). To be used at runtime. */
|
|
ret = mchp_pit64b_init_mode(&timer, freq);
|
|
if (ret)
|
|
goto irq_unmap;
|
|
|
|
ret = clk_prepare_enable(timer.pclk);
|
|
if (ret)
|
|
goto irq_unmap;
|
|
|
|
if (timer.mode & MCHP_PIT64B_MR_SGCLK) {
|
|
ret = clk_prepare_enable(timer.gclk);
|
|
if (ret)
|
|
goto pclk_unprepare;
|
|
|
|
clk_rate = clk_get_rate(timer.gclk);
|
|
} else {
|
|
clk_rate = clk_get_rate(timer.pclk);
|
|
}
|
|
clk_rate = clk_rate / (MCHP_PIT64B_MODE_TO_PRES(timer.mode) + 1);
|
|
|
|
if (clkevt)
|
|
ret = mchp_pit64b_init_clkevt(&timer, clk_rate, irq);
|
|
else
|
|
ret = mchp_pit64b_init_clksrc(&timer, clk_rate);
|
|
|
|
if (ret)
|
|
goto gclk_unprepare;
|
|
|
|
return 0;
|
|
|
|
gclk_unprepare:
|
|
if (timer.mode & MCHP_PIT64B_MR_SGCLK)
|
|
clk_disable_unprepare(timer.gclk);
|
|
pclk_unprepare:
|
|
clk_disable_unprepare(timer.pclk);
|
|
irq_unmap:
|
|
irq_dispose_mapping(irq);
|
|
io_unmap:
|
|
iounmap(timer.base);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __init mchp_pit64b_dt_init(struct device_node *node)
|
|
{
|
|
static int inits;
|
|
|
|
switch (inits++) {
|
|
case 0:
|
|
/* 1st request, register clockevent. */
|
|
return mchp_pit64b_dt_init_timer(node, true);
|
|
case 1:
|
|
/* 2nd request, register clocksource. */
|
|
return mchp_pit64b_dt_init_timer(node, false);
|
|
}
|
|
|
|
/* The rest, don't care. */
|
|
return -EINVAL;
|
|
}
|
|
|
|
TIMER_OF_DECLARE(mchp_pit64b, "microchip,sam9x60-pit64b", mchp_pit64b_dt_init);
|