mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
72e43164fd
The PM runtime core by default assumes a chip is suspended when runtime PM is enabled. Currently the arizona driver enables runtime PM when the chip is fully active and then disables the DCVDD regulator at the end of arizona_dev_init. This however has several problems, firstly the if we reach the end of arizona_dev_init, we did not properly follow all the proceedures for shutting down the chip, and most notably we never marked the chip as cache only so any writes occurring between then and the next PM runtime resume will be lost. Secondly, if we are already resumed when we reach the end of dev_init, then at best we get unbalanced regulator enable/disables at work we lose DCVDD whilst we need it. Additionally, since the commit 4f0216409f7c ("mfd: arizona: Add better support for system suspend"), the PM runtime operations may disable/enable the IRQ, so the IRQs must now be enabled before we call any PM operations. This patch adds a call to pm_runtime_set_active to inform the PM core that the device is starting up active and moves the PM enabling to around the IRQ initialisation to avoid any PM callbacks happening until the IRQs are initialised. Cc: stable@vger.kernel.org # v3.5+ Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
1320 lines
32 KiB
C
1320 lines
32 KiB
C
/*
|
|
* Arizona core driver
|
|
*
|
|
* Copyright 2012 Wolfson Microelectronics plc
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/mfd/arizona/core.h>
|
|
#include <linux/mfd/arizona/registers.h>
|
|
|
|
#include "arizona.h"
|
|
|
|
static const char *wm5102_core_supplies[] = {
|
|
"AVDD",
|
|
"DBVDD1",
|
|
};
|
|
|
|
int arizona_clk32k_enable(struct arizona *arizona)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&arizona->clk_lock);
|
|
|
|
arizona->clk32k_ref++;
|
|
|
|
if (arizona->clk32k_ref == 1) {
|
|
switch (arizona->pdata.clk32k_src) {
|
|
case ARIZONA_32KZ_MCLK1:
|
|
ret = pm_runtime_get_sync(arizona->dev);
|
|
if (ret != 0)
|
|
goto out;
|
|
break;
|
|
}
|
|
|
|
ret = regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
|
|
ARIZONA_CLK_32K_ENA,
|
|
ARIZONA_CLK_32K_ENA);
|
|
}
|
|
|
|
out:
|
|
if (ret != 0)
|
|
arizona->clk32k_ref--;
|
|
|
|
mutex_unlock(&arizona->clk_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_clk32k_enable);
|
|
|
|
int arizona_clk32k_disable(struct arizona *arizona)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&arizona->clk_lock);
|
|
|
|
BUG_ON(arizona->clk32k_ref <= 0);
|
|
|
|
arizona->clk32k_ref--;
|
|
|
|
if (arizona->clk32k_ref == 0) {
|
|
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
|
|
ARIZONA_CLK_32K_ENA, 0);
|
|
|
|
switch (arizona->pdata.clk32k_src) {
|
|
case ARIZONA_32KZ_MCLK1:
|
|
pm_runtime_put_sync(arizona->dev);
|
|
break;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&arizona->clk_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_clk32k_disable);
|
|
|
|
static irqreturn_t arizona_clkgen_err(int irq, void *data)
|
|
{
|
|
struct arizona *arizona = data;
|
|
|
|
dev_err(arizona->dev, "CLKGEN error\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t arizona_underclocked(int irq, void *data)
|
|
{
|
|
struct arizona *arizona = data;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(arizona->regmap, ARIZONA_INTERRUPT_RAW_STATUS_8,
|
|
&val);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to read underclock status: %d\n",
|
|
ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (val & ARIZONA_AIF3_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF3 underclocked\n");
|
|
if (val & ARIZONA_AIF2_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF2 underclocked\n");
|
|
if (val & ARIZONA_AIF1_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF1 underclocked\n");
|
|
if (val & ARIZONA_ISRC3_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC3 underclocked\n");
|
|
if (val & ARIZONA_ISRC2_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC2 underclocked\n");
|
|
if (val & ARIZONA_ISRC1_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC1 underclocked\n");
|
|
if (val & ARIZONA_FX_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "FX underclocked\n");
|
|
if (val & ARIZONA_ASRC_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC underclocked\n");
|
|
if (val & ARIZONA_DAC_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "DAC underclocked\n");
|
|
if (val & ARIZONA_ADC_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ADC underclocked\n");
|
|
if (val & ARIZONA_MIXER_UNDERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Mixer dropped sample\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t arizona_overclocked(int irq, void *data)
|
|
{
|
|
struct arizona *arizona = data;
|
|
unsigned int val[2];
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(arizona->regmap, ARIZONA_INTERRUPT_RAW_STATUS_6,
|
|
&val[0], 2);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to read overclock status: %d\n",
|
|
ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (val[0] & ARIZONA_PWM_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "PWM overclocked\n");
|
|
if (val[0] & ARIZONA_FX_CORE_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "FX core overclocked\n");
|
|
if (val[0] & ARIZONA_DAC_SYS_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "DAC SYS overclocked\n");
|
|
if (val[0] & ARIZONA_DAC_WARP_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "DAC WARP overclocked\n");
|
|
if (val[0] & ARIZONA_ADC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ADC overclocked\n");
|
|
if (val[0] & ARIZONA_MIXER_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Mixer overclocked\n");
|
|
if (val[0] & ARIZONA_AIF3_SYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF3 overclocked\n");
|
|
if (val[0] & ARIZONA_AIF2_SYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF2 overclocked\n");
|
|
if (val[0] & ARIZONA_AIF1_SYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "AIF1 overclocked\n");
|
|
if (val[0] & ARIZONA_PAD_CTRL_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Pad control overclocked\n");
|
|
|
|
if (val[1] & ARIZONA_SLIMBUS_SUBSYS_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Slimbus subsystem overclocked\n");
|
|
if (val[1] & ARIZONA_SLIMBUS_ASYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Slimbus async overclocked\n");
|
|
if (val[1] & ARIZONA_SLIMBUS_SYNC_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "Slimbus sync overclocked\n");
|
|
if (val[1] & ARIZONA_ASRC_ASYNC_SYS_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC async system overclocked\n");
|
|
if (val[1] & ARIZONA_ASRC_ASYNC_WARP_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC async WARP overclocked\n");
|
|
if (val[1] & ARIZONA_ASRC_SYNC_SYS_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC sync system overclocked\n");
|
|
if (val[1] & ARIZONA_ASRC_SYNC_WARP_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ASRC sync WARP overclocked\n");
|
|
if (val[1] & ARIZONA_ADSP2_1_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "DSP1 overclocked\n");
|
|
if (val[1] & ARIZONA_ISRC3_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC3 overclocked\n");
|
|
if (val[1] & ARIZONA_ISRC2_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC2 overclocked\n");
|
|
if (val[1] & ARIZONA_ISRC1_OVERCLOCKED_STS)
|
|
dev_err(arizona->dev, "ISRC1 overclocked\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int arizona_poll_reg(struct arizona *arizona,
|
|
int timeout, unsigned int reg,
|
|
unsigned int mask, unsigned int target)
|
|
{
|
|
unsigned int val = 0;
|
|
int ret, i;
|
|
|
|
for (i = 0; i < timeout; i++) {
|
|
ret = regmap_read(arizona->regmap, reg, &val);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to read reg %u: %d\n",
|
|
reg, ret);
|
|
continue;
|
|
}
|
|
|
|
if ((val & mask) == target)
|
|
return 0;
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int arizona_wait_for_boot(struct arizona *arizona)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* We can't use an interrupt as we need to runtime resume to do so,
|
|
* we won't race with the interrupt handler as it'll be blocked on
|
|
* runtime resume.
|
|
*/
|
|
ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
|
|
ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
|
|
|
|
if (!ret)
|
|
regmap_write(arizona->regmap, ARIZONA_INTERRUPT_STATUS_5,
|
|
ARIZONA_BOOT_DONE_STS);
|
|
|
|
pm_runtime_mark_last_busy(arizona->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline void arizona_enable_reset(struct arizona *arizona)
|
|
{
|
|
if (arizona->pdata.reset)
|
|
gpio_set_value_cansleep(arizona->pdata.reset, 0);
|
|
}
|
|
|
|
static void arizona_disable_reset(struct arizona *arizona)
|
|
{
|
|
if (arizona->pdata.reset) {
|
|
switch (arizona->type) {
|
|
case WM5110:
|
|
case WM8280:
|
|
/* Meet requirements for minimum reset duration */
|
|
msleep(5);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
gpio_set_value_cansleep(arizona->pdata.reset, 1);
|
|
msleep(1);
|
|
}
|
|
}
|
|
|
|
struct arizona_sysclk_state {
|
|
unsigned int fll;
|
|
unsigned int sysclk;
|
|
};
|
|
|
|
static int arizona_enable_freerun_sysclk(struct arizona *arizona,
|
|
struct arizona_sysclk_state *state)
|
|
{
|
|
int ret, err;
|
|
|
|
/* Cache existing FLL and SYSCLK settings */
|
|
ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &state->fll);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to cache FLL settings: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1,
|
|
&state->sysclk);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to cache SYSCLK settings: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Start up SYSCLK using the FLL in free running mode */
|
|
ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1,
|
|
ARIZONA_FLL1_ENA | ARIZONA_FLL1_FREERUN);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to start FLL in freerunning mode: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
|
|
ARIZONA_FLL1_CLOCK_OK_STS,
|
|
ARIZONA_FLL1_CLOCK_OK_STS);
|
|
if (ret) {
|
|
ret = -ETIMEDOUT;
|
|
goto err_fll;
|
|
}
|
|
|
|
ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to start SYSCLK: %d\n", ret);
|
|
goto err_fll;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_fll:
|
|
err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, state->fll);
|
|
if (err)
|
|
dev_err(arizona->dev,
|
|
"Failed to re-apply old FLL settings: %d\n", err);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int arizona_disable_freerun_sysclk(struct arizona *arizona,
|
|
struct arizona_sysclk_state *state)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1,
|
|
state->sysclk);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to re-apply old SYSCLK settings: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, state->fll);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to re-apply old FLL settings: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm5102_apply_hardware_patch(struct arizona *arizona)
|
|
{
|
|
struct arizona_sysclk_state state;
|
|
int err, ret;
|
|
|
|
ret = arizona_enable_freerun_sysclk(arizona, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Start the write sequencer and wait for it to finish */
|
|
ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
|
|
ARIZONA_WSEQ_ENA | ARIZONA_WSEQ_START | 160);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to start write sequencer: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
|
|
ARIZONA_WSEQ_BUSY, 0);
|
|
if (ret) {
|
|
regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
|
|
ARIZONA_WSEQ_ABORT);
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
|
|
err:
|
|
err = arizona_disable_freerun_sysclk(arizona, &state);
|
|
|
|
return ret ?: err;
|
|
}
|
|
|
|
/*
|
|
* Register patch to some of the CODECs internal write sequences
|
|
* to ensure a clean exit from the low power sleep state.
|
|
*/
|
|
static const struct reg_default wm5110_sleep_patch[] = {
|
|
{ 0x337A, 0xC100 },
|
|
{ 0x337B, 0x0041 },
|
|
{ 0x3300, 0xA210 },
|
|
{ 0x3301, 0x050C },
|
|
};
|
|
|
|
static int wm5110_apply_sleep_patch(struct arizona *arizona)
|
|
{
|
|
struct arizona_sysclk_state state;
|
|
int err, ret;
|
|
|
|
ret = arizona_enable_freerun_sysclk(arizona, &state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_multi_reg_write_bypassed(arizona->regmap,
|
|
wm5110_sleep_patch,
|
|
ARRAY_SIZE(wm5110_sleep_patch));
|
|
|
|
err = arizona_disable_freerun_sysclk(arizona, &state);
|
|
|
|
return ret ?: err;
|
|
}
|
|
|
|
static int wm5102_clear_write_sequencer(struct arizona *arizona)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_3,
|
|
0x0);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to clear write sequencer state: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
arizona_enable_reset(arizona);
|
|
regulator_disable(arizona->dcvdd);
|
|
|
|
msleep(20);
|
|
|
|
ret = regulator_enable(arizona->dcvdd);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Failed to re-enable DCVDD: %d\n", ret);
|
|
return ret;
|
|
}
|
|
arizona_disable_reset(arizona);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int arizona_runtime_resume(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
dev_dbg(arizona->dev, "Leaving AoD mode\n");
|
|
|
|
if (arizona->has_fully_powered_off) {
|
|
dev_dbg(arizona->dev, "Re-enabling core supplies\n");
|
|
|
|
ret = regulator_bulk_enable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable core supplies: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = regulator_enable(arizona->dcvdd);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to enable DCVDD: %d\n", ret);
|
|
if (arizona->has_fully_powered_off)
|
|
regulator_bulk_disable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
return ret;
|
|
}
|
|
|
|
if (arizona->has_fully_powered_off) {
|
|
arizona_disable_reset(arizona);
|
|
enable_irq(arizona->irq);
|
|
arizona->has_fully_powered_off = false;
|
|
}
|
|
|
|
regcache_cache_only(arizona->regmap, false);
|
|
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
if (arizona->external_dcvdd) {
|
|
ret = regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ISOLATION_CONTROL,
|
|
ARIZONA_ISOLATE_DCVDD1, 0);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev,
|
|
"Failed to connect DCVDD: %d\n", ret);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
ret = wm5102_patch(arizona);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to apply patch: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = wm5102_apply_hardware_patch(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to apply hardware patch: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
break;
|
|
case WM5110:
|
|
case WM8280:
|
|
ret = arizona_wait_for_boot(arizona);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (arizona->external_dcvdd) {
|
|
ret = regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ISOLATION_CONTROL,
|
|
ARIZONA_ISOLATE_DCVDD1, 0);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to connect DCVDD: %d\n", ret);
|
|
goto err;
|
|
}
|
|
} else {
|
|
/*
|
|
* As this is only called for the internal regulator
|
|
* (where we know voltage ranges available) it is ok
|
|
* to request an exact range.
|
|
*/
|
|
ret = regulator_set_voltage(arizona->dcvdd,
|
|
1200000, 1200000);
|
|
if (ret < 0) {
|
|
dev_err(arizona->dev,
|
|
"Failed to set resume voltage: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
ret = wm5110_apply_sleep_patch(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to re-apply sleep patch: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
break;
|
|
default:
|
|
ret = arizona_wait_for_boot(arizona);
|
|
if (ret != 0) {
|
|
goto err;
|
|
}
|
|
|
|
if (arizona->external_dcvdd) {
|
|
ret = regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ISOLATION_CONTROL,
|
|
ARIZONA_ISOLATE_DCVDD1, 0);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev,
|
|
"Failed to connect DCVDD: %d\n", ret);
|
|
goto err;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
ret = regcache_sync(arizona->regmap);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to restore register cache\n");
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
regcache_cache_only(arizona->regmap, true);
|
|
regulator_disable(arizona->dcvdd);
|
|
return ret;
|
|
}
|
|
|
|
static int arizona_runtime_suspend(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
dev_dbg(arizona->dev, "Entering AoD mode\n");
|
|
|
|
ret = regmap_read(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, &val);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to check jack det status: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (arizona->external_dcvdd) {
|
|
ret = regmap_update_bits(arizona->regmap,
|
|
ARIZONA_ISOLATION_CONTROL,
|
|
ARIZONA_ISOLATE_DCVDD1,
|
|
ARIZONA_ISOLATE_DCVDD1);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to isolate DCVDD: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
switch (arizona->type) {
|
|
case WM5110:
|
|
case WM8280:
|
|
if (arizona->external_dcvdd)
|
|
break;
|
|
|
|
/*
|
|
* As this is only called for the internal regulator
|
|
* (where we know voltage ranges available) it is ok
|
|
* to request an exact range.
|
|
*/
|
|
ret = regulator_set_voltage(arizona->dcvdd, 1175000, 1175000);
|
|
if (ret < 0) {
|
|
dev_err(arizona->dev,
|
|
"Failed to set suspend voltage: %d\n", ret);
|
|
return ret;
|
|
}
|
|
break;
|
|
case WM5102:
|
|
if (!(val & ARIZONA_JD1_ENA)) {
|
|
ret = regmap_write(arizona->regmap,
|
|
ARIZONA_WRITE_SEQUENCER_CTRL_3, 0x0);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to clear write sequencer: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
regcache_cache_only(arizona->regmap, true);
|
|
regcache_mark_dirty(arizona->regmap);
|
|
regulator_disable(arizona->dcvdd);
|
|
|
|
/* Allow us to completely power down if no jack detection */
|
|
if (!(val & ARIZONA_JD1_ENA)) {
|
|
dev_dbg(arizona->dev, "Fully powering off\n");
|
|
|
|
arizona->has_fully_powered_off = true;
|
|
|
|
disable_irq_nosync(arizona->irq);
|
|
arizona_enable_reset(arizona);
|
|
regulator_bulk_disable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int arizona_suspend(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(arizona->dev, "Suspend, disabling IRQ\n");
|
|
disable_irq(arizona->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arizona_suspend_late(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(arizona->dev, "Late suspend, reenabling IRQ\n");
|
|
enable_irq(arizona->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arizona_resume_noirq(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(arizona->dev, "Early resume, disabling IRQ\n");
|
|
disable_irq(arizona->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int arizona_resume(struct device *dev)
|
|
{
|
|
struct arizona *arizona = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(arizona->dev, "Late resume, reenabling IRQ\n");
|
|
enable_irq(arizona->irq);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
const struct dev_pm_ops arizona_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(arizona_runtime_suspend,
|
|
arizona_runtime_resume,
|
|
NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(arizona_suspend, arizona_resume)
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend_late = arizona_suspend_late,
|
|
.resume_noirq = arizona_resume_noirq,
|
|
#endif
|
|
};
|
|
EXPORT_SYMBOL_GPL(arizona_pm_ops);
|
|
|
|
#ifdef CONFIG_OF
|
|
unsigned long arizona_of_get_type(struct device *dev)
|
|
{
|
|
const struct of_device_id *id = of_match_device(arizona_of_match, dev);
|
|
|
|
if (id)
|
|
return (unsigned long)id->data;
|
|
else
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_of_get_type);
|
|
|
|
int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop,
|
|
bool mandatory)
|
|
{
|
|
int gpio;
|
|
|
|
gpio = of_get_named_gpio(arizona->dev->of_node, prop, 0);
|
|
if (gpio < 0) {
|
|
if (mandatory)
|
|
dev_err(arizona->dev,
|
|
"Mandatory DT gpio %s missing/malformed: %d\n",
|
|
prop, gpio);
|
|
|
|
gpio = 0;
|
|
}
|
|
|
|
return gpio;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
|
|
|
|
static int arizona_of_get_core_pdata(struct arizona *arizona)
|
|
{
|
|
struct arizona_pdata *pdata = &arizona->pdata;
|
|
struct property *prop;
|
|
const __be32 *cur;
|
|
u32 val;
|
|
int ret, i;
|
|
int count = 0;
|
|
|
|
pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);
|
|
|
|
ret = of_property_read_u32_array(arizona->dev->of_node,
|
|
"wlf,gpio-defaults",
|
|
arizona->pdata.gpio_defaults,
|
|
ARRAY_SIZE(arizona->pdata.gpio_defaults));
|
|
if (ret >= 0) {
|
|
/*
|
|
* All values are literal except out of range values
|
|
* which are chip default, translate into platform
|
|
* data which uses 0 as chip default and out of range
|
|
* as zero.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
|
|
if (arizona->pdata.gpio_defaults[i] > 0xffff)
|
|
arizona->pdata.gpio_defaults[i] = 0;
|
|
else if (arizona->pdata.gpio_defaults[i] == 0)
|
|
arizona->pdata.gpio_defaults[i] = 0x10000;
|
|
}
|
|
} else {
|
|
dev_err(arizona->dev, "Failed to parse GPIO defaults: %d\n",
|
|
ret);
|
|
}
|
|
|
|
of_property_for_each_u32(arizona->dev->of_node, "wlf,inmode", prop,
|
|
cur, val) {
|
|
if (count == ARRAY_SIZE(arizona->pdata.inmode))
|
|
break;
|
|
|
|
arizona->pdata.inmode[count] = val;
|
|
count++;
|
|
}
|
|
|
|
count = 0;
|
|
of_property_for_each_u32(arizona->dev->of_node, "wlf,dmic-ref", prop,
|
|
cur, val) {
|
|
if (count == ARRAY_SIZE(arizona->pdata.dmic_ref))
|
|
break;
|
|
|
|
arizona->pdata.dmic_ref[count] = val;
|
|
count++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct of_device_id arizona_of_match[] = {
|
|
{ .compatible = "wlf,wm5102", .data = (void *)WM5102 },
|
|
{ .compatible = "wlf,wm5110", .data = (void *)WM5110 },
|
|
{ .compatible = "wlf,wm8280", .data = (void *)WM8280 },
|
|
{ .compatible = "wlf,wm8997", .data = (void *)WM8997 },
|
|
{},
|
|
};
|
|
EXPORT_SYMBOL_GPL(arizona_of_match);
|
|
#else
|
|
static inline int arizona_of_get_core_pdata(struct arizona *arizona)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct mfd_cell early_devs[] = {
|
|
{ .name = "arizona-ldo1" },
|
|
};
|
|
|
|
static const char *wm5102_supplies[] = {
|
|
"MICVDD",
|
|
"DBVDD2",
|
|
"DBVDD3",
|
|
"CPVDD",
|
|
"SPKVDDL",
|
|
"SPKVDDR",
|
|
};
|
|
|
|
static const struct mfd_cell wm5102_devs[] = {
|
|
{ .name = "arizona-micsupp" },
|
|
{
|
|
.name = "arizona-extcon",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = 1, /* We only need MICVDD */
|
|
},
|
|
{ .name = "arizona-gpio" },
|
|
{ .name = "arizona-haptics" },
|
|
{ .name = "arizona-pwm" },
|
|
{
|
|
.name = "wm5102-codec",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(wm5102_supplies),
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell wm5110_devs[] = {
|
|
{ .name = "arizona-micsupp" },
|
|
{
|
|
.name = "arizona-extcon",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = 1, /* We only need MICVDD */
|
|
},
|
|
{ .name = "arizona-gpio" },
|
|
{ .name = "arizona-haptics" },
|
|
{ .name = "arizona-pwm" },
|
|
{
|
|
.name = "wm5110-codec",
|
|
.parent_supplies = wm5102_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(wm5102_supplies),
|
|
},
|
|
};
|
|
|
|
static const char *wm8997_supplies[] = {
|
|
"MICVDD",
|
|
"DBVDD2",
|
|
"CPVDD",
|
|
"SPKVDD",
|
|
};
|
|
|
|
static const struct mfd_cell wm8997_devs[] = {
|
|
{ .name = "arizona-micsupp" },
|
|
{
|
|
.name = "arizona-extcon",
|
|
.parent_supplies = wm8997_supplies,
|
|
.num_parent_supplies = 1, /* We only need MICVDD */
|
|
},
|
|
{ .name = "arizona-gpio" },
|
|
{ .name = "arizona-haptics" },
|
|
{ .name = "arizona-pwm" },
|
|
{
|
|
.name = "wm8997-codec",
|
|
.parent_supplies = wm8997_supplies,
|
|
.num_parent_supplies = ARRAY_SIZE(wm8997_supplies),
|
|
},
|
|
};
|
|
|
|
int arizona_dev_init(struct arizona *arizona)
|
|
{
|
|
struct device *dev = arizona->dev;
|
|
const char *type_name;
|
|
unsigned int reg, val;
|
|
int (*apply_patch)(struct arizona *) = NULL;
|
|
int ret, i;
|
|
|
|
dev_set_drvdata(arizona->dev, arizona);
|
|
mutex_init(&arizona->clk_lock);
|
|
|
|
if (dev_get_platdata(arizona->dev))
|
|
memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
|
|
sizeof(arizona->pdata));
|
|
else
|
|
arizona_of_get_core_pdata(arizona);
|
|
|
|
regcache_cache_only(arizona->regmap, true);
|
|
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
case WM5110:
|
|
case WM8280:
|
|
case WM8997:
|
|
for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
|
|
arizona->core_supplies[i].supply
|
|
= wm5102_core_supplies[i];
|
|
arizona->num_core_supplies = ARRAY_SIZE(wm5102_core_supplies);
|
|
break;
|
|
default:
|
|
dev_err(arizona->dev, "Unknown device type %d\n",
|
|
arizona->type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Mark DCVDD as external, LDO1 driver will clear if internal */
|
|
arizona->external_dcvdd = true;
|
|
|
|
ret = mfd_add_devices(arizona->dev, -1, early_devs,
|
|
ARRAY_SIZE(early_devs), NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to add early children: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_regulator_bulk_get(dev, arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to request core supplies: %d\n",
|
|
ret);
|
|
goto err_early;
|
|
}
|
|
|
|
/**
|
|
* Don't use devres here because the only device we have to get
|
|
* against is the MFD device and DCVDD will likely be supplied by
|
|
* one of its children. Meaning that the regulator will be
|
|
* destroyed by the time devres calls regulator put.
|
|
*/
|
|
arizona->dcvdd = regulator_get(arizona->dev, "DCVDD");
|
|
if (IS_ERR(arizona->dcvdd)) {
|
|
ret = PTR_ERR(arizona->dcvdd);
|
|
dev_err(dev, "Failed to request DCVDD: %d\n", ret);
|
|
goto err_early;
|
|
}
|
|
|
|
if (arizona->pdata.reset) {
|
|
/* Start out with /RESET low to put the chip into reset */
|
|
ret = devm_gpio_request_one(arizona->dev, arizona->pdata.reset,
|
|
GPIOF_DIR_OUT | GPIOF_INIT_LOW,
|
|
"arizona /RESET");
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to request /RESET: %d\n", ret);
|
|
goto err_dcvdd;
|
|
}
|
|
}
|
|
|
|
ret = regulator_bulk_enable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable core supplies: %d\n",
|
|
ret);
|
|
goto err_dcvdd;
|
|
}
|
|
|
|
ret = regulator_enable(arizona->dcvdd);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
|
|
goto err_enable;
|
|
}
|
|
|
|
arizona_disable_reset(arizona);
|
|
|
|
regcache_cache_only(arizona->regmap, false);
|
|
|
|
/* Verify that this is a chip we know about */
|
|
ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to read ID register: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
switch (reg) {
|
|
case 0x5102:
|
|
case 0x5110:
|
|
case 0x8997:
|
|
break;
|
|
default:
|
|
dev_err(arizona->dev, "Unknown device ID: %x\n", reg);
|
|
goto err_reset;
|
|
}
|
|
|
|
/* If we have a /RESET GPIO we'll already be reset */
|
|
if (!arizona->pdata.reset) {
|
|
ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to reset device: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
/* Ensure device startup is complete */
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
ret = regmap_read(arizona->regmap,
|
|
ARIZONA_WRITE_SEQUENCER_CTRL_3, &val);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"Failed to check write sequencer state: %d\n",
|
|
ret);
|
|
} else if (val & 0x01) {
|
|
ret = wm5102_clear_write_sequencer(arizona);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ret = arizona_wait_for_boot(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev, "Device failed initial boot: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
/* Read the device ID information & do device specific stuff */
|
|
ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to read ID register: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
ret = regmap_read(arizona->regmap, ARIZONA_DEVICE_REVISION,
|
|
&arizona->rev);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to read revision register: %d\n", ret);
|
|
goto err_reset;
|
|
}
|
|
arizona->rev &= ARIZONA_DEVICE_REVISION_MASK;
|
|
|
|
switch (reg) {
|
|
#ifdef CONFIG_MFD_WM5102
|
|
case 0x5102:
|
|
type_name = "WM5102";
|
|
if (arizona->type != WM5102) {
|
|
dev_err(arizona->dev, "WM5102 registered as %d\n",
|
|
arizona->type);
|
|
arizona->type = WM5102;
|
|
}
|
|
apply_patch = wm5102_patch;
|
|
arizona->rev &= 0x7;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM5110
|
|
case 0x5110:
|
|
switch (arizona->type) {
|
|
case WM5110:
|
|
type_name = "WM5110";
|
|
break;
|
|
case WM8280:
|
|
type_name = "WM8280";
|
|
break;
|
|
default:
|
|
type_name = "WM5110";
|
|
dev_err(arizona->dev, "WM5110 registered as %d\n",
|
|
arizona->type);
|
|
arizona->type = WM5110;
|
|
break;
|
|
}
|
|
apply_patch = wm5110_patch;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_MFD_WM8997
|
|
case 0x8997:
|
|
type_name = "WM8997";
|
|
if (arizona->type != WM8997) {
|
|
dev_err(arizona->dev, "WM8997 registered as %d\n",
|
|
arizona->type);
|
|
arizona->type = WM8997;
|
|
}
|
|
apply_patch = wm8997_patch;
|
|
break;
|
|
#endif
|
|
default:
|
|
dev_err(arizona->dev, "Unknown device ID %x\n", reg);
|
|
goto err_reset;
|
|
}
|
|
|
|
dev_info(dev, "%s revision %c\n", type_name, arizona->rev + 'A');
|
|
|
|
if (apply_patch) {
|
|
ret = apply_patch(arizona);
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to apply patch: %d\n",
|
|
ret);
|
|
goto err_reset;
|
|
}
|
|
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
ret = wm5102_apply_hardware_patch(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to apply hardware patch: %d\n",
|
|
ret);
|
|
goto err_reset;
|
|
}
|
|
break;
|
|
case WM5110:
|
|
case WM8280:
|
|
ret = wm5110_apply_sleep_patch(arizona);
|
|
if (ret) {
|
|
dev_err(arizona->dev,
|
|
"Failed to apply sleep patch: %d\n",
|
|
ret);
|
|
goto err_reset;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
|
|
if (!arizona->pdata.gpio_defaults[i])
|
|
continue;
|
|
|
|
regmap_write(arizona->regmap, ARIZONA_GPIO1_CTRL + i,
|
|
arizona->pdata.gpio_defaults[i]);
|
|
}
|
|
|
|
/* Chip default */
|
|
if (!arizona->pdata.clk32k_src)
|
|
arizona->pdata.clk32k_src = ARIZONA_32KZ_MCLK2;
|
|
|
|
switch (arizona->pdata.clk32k_src) {
|
|
case ARIZONA_32KZ_MCLK1:
|
|
case ARIZONA_32KZ_MCLK2:
|
|
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
|
|
ARIZONA_CLK_32K_SRC_MASK,
|
|
arizona->pdata.clk32k_src - 1);
|
|
arizona_clk32k_enable(arizona);
|
|
break;
|
|
case ARIZONA_32KZ_NONE:
|
|
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
|
|
ARIZONA_CLK_32K_SRC_MASK, 2);
|
|
break;
|
|
default:
|
|
dev_err(arizona->dev, "Invalid 32kHz clock source: %d\n",
|
|
arizona->pdata.clk32k_src);
|
|
ret = -EINVAL;
|
|
goto err_reset;
|
|
}
|
|
|
|
for (i = 0; i < ARIZONA_MAX_MICBIAS; i++) {
|
|
if (!arizona->pdata.micbias[i].mV &&
|
|
!arizona->pdata.micbias[i].bypass)
|
|
continue;
|
|
|
|
/* Apply default for bypass mode */
|
|
if (!arizona->pdata.micbias[i].mV)
|
|
arizona->pdata.micbias[i].mV = 2800;
|
|
|
|
val = (arizona->pdata.micbias[i].mV - 1500) / 100;
|
|
|
|
val <<= ARIZONA_MICB1_LVL_SHIFT;
|
|
|
|
if (arizona->pdata.micbias[i].ext_cap)
|
|
val |= ARIZONA_MICB1_EXT_CAP;
|
|
|
|
if (arizona->pdata.micbias[i].discharge)
|
|
val |= ARIZONA_MICB1_DISCH;
|
|
|
|
if (arizona->pdata.micbias[i].soft_start)
|
|
val |= ARIZONA_MICB1_RATE;
|
|
|
|
if (arizona->pdata.micbias[i].bypass)
|
|
val |= ARIZONA_MICB1_BYPASS;
|
|
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_MIC_BIAS_CTRL_1 + i,
|
|
ARIZONA_MICB1_LVL_MASK |
|
|
ARIZONA_MICB1_EXT_CAP |
|
|
ARIZONA_MICB1_DISCH |
|
|
ARIZONA_MICB1_BYPASS |
|
|
ARIZONA_MICB1_RATE, val);
|
|
}
|
|
|
|
for (i = 0; i < ARIZONA_MAX_INPUT; i++) {
|
|
/* Default for both is 0 so noop with defaults */
|
|
val = arizona->pdata.dmic_ref[i]
|
|
<< ARIZONA_IN1_DMIC_SUP_SHIFT;
|
|
if (arizona->pdata.inmode[i] & ARIZONA_INMODE_DMIC)
|
|
val |= 1 << ARIZONA_IN1_MODE_SHIFT;
|
|
if (arizona->pdata.inmode[i] & ARIZONA_INMODE_SE)
|
|
val |= 1 << ARIZONA_IN1_SINGLE_ENDED_SHIFT;
|
|
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_IN1L_CONTROL + (i * 8),
|
|
ARIZONA_IN1_DMIC_SUP_MASK |
|
|
ARIZONA_IN1_MODE_MASK |
|
|
ARIZONA_IN1_SINGLE_ENDED_MASK, val);
|
|
}
|
|
|
|
for (i = 0; i < ARIZONA_MAX_OUTPUT; i++) {
|
|
/* Default is 0 so noop with defaults */
|
|
if (arizona->pdata.out_mono[i])
|
|
val = ARIZONA_OUT1_MONO;
|
|
else
|
|
val = 0;
|
|
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_OUTPUT_PATH_CONFIG_1L + (i * 8),
|
|
ARIZONA_OUT1_MONO, val);
|
|
}
|
|
|
|
for (i = 0; i < ARIZONA_MAX_PDM_SPK; i++) {
|
|
if (arizona->pdata.spk_mute[i])
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_PDM_SPK1_CTRL_1 + (i * 2),
|
|
ARIZONA_SPK1_MUTE_ENDIAN_MASK |
|
|
ARIZONA_SPK1_MUTE_SEQ1_MASK,
|
|
arizona->pdata.spk_mute[i]);
|
|
|
|
if (arizona->pdata.spk_fmt[i])
|
|
regmap_update_bits(arizona->regmap,
|
|
ARIZONA_PDM_SPK1_CTRL_2 + (i * 2),
|
|
ARIZONA_SPK1_FMT_MASK,
|
|
arizona->pdata.spk_fmt[i]);
|
|
}
|
|
|
|
pm_runtime_set_active(arizona->dev);
|
|
pm_runtime_enable(arizona->dev);
|
|
|
|
/* Set up for interrupts */
|
|
ret = arizona_irq_init(arizona);
|
|
if (ret != 0)
|
|
goto err_reset;
|
|
|
|
pm_runtime_set_autosuspend_delay(arizona->dev, 100);
|
|
pm_runtime_use_autosuspend(arizona->dev);
|
|
|
|
arizona_request_irq(arizona, ARIZONA_IRQ_CLKGEN_ERR, "CLKGEN error",
|
|
arizona_clkgen_err, arizona);
|
|
arizona_request_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, "Overclocked",
|
|
arizona_overclocked, arizona);
|
|
arizona_request_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, "Underclocked",
|
|
arizona_underclocked, arizona);
|
|
|
|
switch (arizona->type) {
|
|
case WM5102:
|
|
ret = mfd_add_devices(arizona->dev, -1, wm5102_devs,
|
|
ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
|
|
break;
|
|
case WM5110:
|
|
case WM8280:
|
|
ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
|
|
ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
|
|
break;
|
|
case WM8997:
|
|
ret = mfd_add_devices(arizona->dev, -1, wm8997_devs,
|
|
ARRAY_SIZE(wm8997_devs), NULL, 0, NULL);
|
|
break;
|
|
}
|
|
|
|
if (ret != 0) {
|
|
dev_err(arizona->dev, "Failed to add subdevices: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
arizona_irq_exit(arizona);
|
|
err_reset:
|
|
arizona_enable_reset(arizona);
|
|
regulator_disable(arizona->dcvdd);
|
|
err_enable:
|
|
regulator_bulk_disable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
err_dcvdd:
|
|
regulator_put(arizona->dcvdd);
|
|
err_early:
|
|
mfd_remove_devices(dev);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_dev_init);
|
|
|
|
int arizona_dev_exit(struct arizona *arizona)
|
|
{
|
|
pm_runtime_disable(arizona->dev);
|
|
|
|
regulator_disable(arizona->dcvdd);
|
|
regulator_put(arizona->dcvdd);
|
|
|
|
mfd_remove_devices(arizona->dev);
|
|
arizona_free_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, arizona);
|
|
arizona_free_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, arizona);
|
|
arizona_free_irq(arizona, ARIZONA_IRQ_CLKGEN_ERR, arizona);
|
|
arizona_irq_exit(arizona);
|
|
arizona_enable_reset(arizona);
|
|
|
|
regulator_bulk_disable(arizona->num_core_supplies,
|
|
arizona->core_supplies);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(arizona_dev_exit);
|