AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-26 21:20:52 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
3bb67df5b5
linux_dsm_epyc7002/drivers/scsi
History
Dilip Kumar Uppugandla 3bb67df5b5 qla2xxx: Check for online flag instead of active reset when transmitting responses 
Driver has following initialization sequence for Target mode

1. Driver initialization starts

2. ISP Abort is scheduled when the target is enabled.

qla2xxx [0000:04:00.0]-4807:25: ISP abort scheduled
qla2xxx [0000:04:00.0]-00af:25: Performing ISP error recovery - ha=ffff880caa9e0000.

3. DPC thread starts the ISP Abort

4. While DPC is resetting the chip and initializing the firmware, we get
   async events from the firmware about P2P mode, LOOP UP and PORT UPDATE.

5. PRLI from a initiator is delivered to us followed by a PLOGI and then a
   SCSI command which creates a session.

6. If the SCSI command is a WRITE in this case, we issue XFR RDY and it
   gets dropped as can be seen with messages RESET-XFR because ISP Abort
   is still active

qla2xxx [0000:04:00.0]-e902:25: RESET-XFR active/old-count/new-count = 1/1/1.

7. If the SCSI command is a READ, we issue RESPONSE and they get dropped
   as well because Abort is still active.

qla2xxx [0000:04:00.0]-e901:25: RESET-RSP active/old-count/new-count = 1/1/1

8. Now eventually, ISP Abort finishes clearing the DPC flags.

qla2xxx [0000:04:00.0]-8822:25: qla2x00_abort_isp succeeded.
qla2xxx [0000:04:00.0]-4808:25: ISP abort end.

9. Since we dropped SCSI commands silently (without any responses sent
   to the initiator) initiator waits for a SCSI timeout (which is 60
   seconds in our case), Sends an ABTS which fails since there
   no se_cmd found for the tag that ABTS is referencing as the
   commands were cleaned up in Step 6 and 7.

10. Initiator send an IO after the ABTS which succeed fine.

To fix the above case, the following changes have been made:
  - To prevent target from dropping commands silently, use the online flag
    instead to check for an active chip reset. Once the port is online during
    a chip reset phase, we are good to process the commands.
  - Clean up qla2x00_restart_isp to not set the online flag and process ATIO
    as it is unnecessary. During a chip reset, interrupts are enabled only
    after setting the online flag to 1, so ATIO's won't be missed and hence
    no need to process ATIO's after setting the online flag.

Signed-off-by: Dilip Kumar Uppugandla <dilip@purestorage.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:50 -08:00
..
aacraid aacraid: Update driver version 2015-11-09 16:12:56 -08:00
aic7xxx scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
aic94xx SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
arcmsr libnvdimm for 4.3: 2015-09-08 14:35:59 -07:00
arm scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
be2iscsi SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
bfa scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
bnx2fc bnx2fc: Update version number to 2.9.6. 2015-11-09 17:32:34 -08:00
bnx2i bnx2i: Fix call trace while device reset 2015-06-02 17:15:24 -07:00
csiostor scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
cxgbi drivers/scsi/cxgbi: fix build with EXTRA_CFLAGS 2015-11-09 15:11:24 -08:00
cxlflash cxlflash: Fix to avoid bypassing context cleanup 2015-10-30 17:25:34 +09:00
device_handler scsi_dh: kill struct scsi_dh_data 2015-08-28 13:14:57 -07:00
dpt
esas2r scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
fcoe scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
fnic scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
ibmvscsi SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
isci SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
libfc libfc: Use the correct function name in kernel-doc comment. 2015-11-09 17:15:52 -08:00
libsas Merge branch 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2015-03-24 17:08:29 -07:00
lpfc scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
megaraid SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
mpt3sas mpt3sas: fix inline markers on non inline function declarations 2015-11-12 21:58:46 -05:00
mvsas SCSI misc on 20151113 2015-11-13 20:35:54 -08:00
osd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2015-04-14 09:50:27 -07:00
pcmcia scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
pm8001 SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
qla2xxx qla2xxx: Check for online flag instead of active reset when transmitting responses 2016-01-07 13:57:50 -08:00
qla4xxx SCSI misc on 20151113 2015-11-13 20:35:54 -08:00
snic SCSI misc on 20151113 2015-11-13 20:35:54 -08:00
sym53c8xx_2 scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ufs SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
.gitignore
3w-9xxx.c 3w-9xxx: don't unmap bounce buffered commands 2015-10-07 10:24:48 -07:00
3w-9xxx.h 3w-9xxx: fix command completion race 2015-04-27 10:10:19 -07:00
3w-sas.c 3w-sas: fix command completion race 2015-04-27 10:04:39 -07:00
3w-sas.h 3w-sas: fix command completion race 2015-04-27 10:04:39 -07:00
3w-xxxx.c 3w-xxxx: fix command completion race 2015-04-27 10:05:55 -07:00
3w-xxxx.h 3w-xxxx: fix command completion race 2015-04-27 10:05:55 -07:00
53c700_d.h_shipped
53c700.c scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
53c700.h
53c700.scr
a100u2w.c scsi: a100u2w: trivial typo in printk 2015-08-07 15:03:42 +02:00
a100u2w.h
a2091.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00
a2091.h
a3000.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
a3000.h
a4000t.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
advansys.c scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
aha152x.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha152x.h
aha1542.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha1542.h aha1542: fix include guard and remove useless changelog 2015-04-09 18:08:31 -07:00
aha1740.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha1740.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
am53c974.c am53c974: Fix crash during modprobe 2015-04-17 10:13:56 -07:00
atari_NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
atari_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
atp870u.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
atp870u.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
BusLogic.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
BusLogic.h [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
bvme6000_scsi.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
ch.c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2015-04-14 09:50:27 -07:00
constants.c scsi: Conditionally compile in constants.c 2015-01-09 15:44:31 +01:00
dc395x.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
dc395x.h
dmx3191d.c dmx3191d: Use NO_IRQ 2014-11-20 09:11:11 +01:00
dpt_i2o.c x86/vm86: Clean up vm86.h includes 2015-07-31 13:31:10 +02:00
dpti.h scsi: use 64-bit LUNs 2014-07-17 22:07:37 +02:00
dtc.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
dtc.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
eata_generic.h
eata_pio.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
eata_pio.h
eata.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
esp_scsi.c scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
esp_scsi.h esp_scsi: correctly detect am53c974 2014-11-24 16:13:16 +01:00
fdomain.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
fdomain.h
FlashPoint.c FlashPoint: fix build warning 2015-11-09 16:32:14 -08:00
g_NCR5380_mmio.c
g_NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
g_NCR5380.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
gdth_ioctl.h
gdth_proc.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
gdth_proc.h
gdth.c scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 2014-11-24 20:01:40 +01:00
gdth.h
gvp11.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00
gvp11.h
hosts.c scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
hpsa_cmd.h hpsa: add in sas transport class 2015-11-09 12:39:28 -05:00
hpsa.c SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
hpsa.h hpsa: add in sas transport class 2015-11-09 12:39:28 -05:00
hptiop.c hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer 2015-08-12 13:14:57 -07:00
hptiop.h hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer 2015-08-12 13:14:57 -07:00
imm.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
imm.h
in2000.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
in2000.h
initio.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
initio.h
ipr.c SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
ipr.h ipr: Driver version 2.6.3. 2015-11-09 19:32:41 -05:00
ips.c ips: remove pointless #warning 2015-06-02 17:24:54 -07:00
ips.h
iscsi_boot_sysfs.c [SCSI] iscsi_boot_sysfs: Fix a memory leak in iscsi_boot_destroy_kset() 2014-03-15 10:19:19 -07:00
iscsi_tcp.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
iscsi_tcp.h net: Fix use after free by removing length arg from sk_data_ready callbacks. 2014-04-11 16:15:36 -04:00
jazz_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
Kconfig SCSI misc on 20151113 2015-11-13 20:35:54 -08:00
lasi700.c
libiscsi_tcp.c [SCSI] libiscsi: Reduce locking contention in fast path 2014-03-15 10:19:18 -07:00
libiscsi.c libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop 2015-09-17 07:25:02 -07:00
mac53c94.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
mac53c94.h
mac_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
mac_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
Makefile mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs 2015-11-11 19:50:11 -05:00
megaraid.c megaraid : use dev_printk when possible 2015-08-26 07:23:04 -07:00
megaraid.h [SCSI] megaraid: simplify internal command handling 2014-03-27 08:26:31 -07:00
mesh.c powerpc: Move Power Macintosh drivers to generic byteswappers 2015-03-23 14:29:40 +11:00
mesh.h
mvme16x_scsi.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
mvme147.c
mvme147.h
mvumi.c mvumi: 64bit value for seconds_since1970 2015-11-11 20:45:23 -05:00
mvumi.h
ncr53c8xx.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ncr53c8xx.h scsi: Remove CONFIG_SCSI_MULTI_LUN 2014-07-17 22:07:35 +02:00
NCR53c406a.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
NCR5380.h atari_NCR5380: Move static co-routine variables to host data 2014-11-20 09:11:20 +01:00
NCR_D700.c
NCR_D700.h
NCR_Q720.c
NCR_Q720.h
nsp32_debug.c
nsp32_io.h
nsp32.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
nsp32.h
osst_detect.h
osst_options.h
osst.c scsi: remove scsi_driver owner field 2014-11-24 20:01:28 +01:00
osst.h
pas16.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
pas16.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
pmcraid.c SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
pmcraid.h
ppa.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
ppa.h
ps3rom.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qla1280.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qla1280.h
qlogicfas408.c
qlogicfas408.h
qlogicfas.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qlogicpti.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qlogicpti.h
raid_class.c
script_asm.pl
scsi_common.c scsi: Protect against buffer possible overflow in scsi_set_sense_information 2015-07-23 22:53:05 -07:00
scsi_debug.c scsi_debug: resp_request: remove unused variable 2015-09-06 11:03:14 -07:00
scsi_devinfo.c SCSI: fix bug in scsi_dev_info_list matching 2015-10-27 11:09:41 +09:00
scsi_dh.c scsi_dh: don't try to load a device handler during async probing 2015-10-27 15:03:31 +09:00
scsi_error.c mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM 2015-11-06 17:50:42 -08:00
scsi_ioctl.c scsi: return EAGAIN when resetting a device under EH 2014-11-12 11:16:12 +01:00
scsi_lib_dma.c
scsi_lib.c mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM 2015-11-06 17:50:42 -08:00
scsi_logging.c scsi_logging: return void for dev_printk() functions 2015-02-04 08:00:24 -08:00
scsi_logging.h scsi: simplify scsi_log_(send|completion) 2014-11-12 11:16:05 +01:00
scsi_module.c
scsi_netlink.c net: Use netlink_ns_capable to verify the permisions of netlink messages 2014-04-24 13:44:54 -04:00
scsi_pm.c SCSI: Fix NULL pointer dereference in runtime PM 2015-08-18 08:14:14 -07:00
scsi_priv.h scsi_dh: fix use-after-free when removing scsi device 2015-10-27 11:22:37 +09:00
scsi_proc.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
scsi_sas_internal.h
scsi_scan.c SCSI queue for 4.4. 2015-11-12 07:06:18 -05:00
scsi_sysctl.c scsi: convert use of typedef ctl_table to struct ctl_table 2014-06-06 16:08:16 -07:00
scsi_sysfs.c SCSI misc on 20151113 2015-11-13 20:35:54 -08:00
scsi_trace.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
scsi_transport_api.h
scsi_transport_fc.c scsi_transport_fc: Add support for 25Gbit speed 2015-04-10 07:40:32 -07:00
scsi_transport_iscsi.c SCSI misc on 20150901 2015-09-02 12:22:54 -07:00
scsi_transport_sas.c scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs. 2015-09-06 11:13:41 -07:00
scsi_transport_spi.c [SCSI] Fix printk typos in drivers/scsi 2015-08-07 14:28:45 +02:00
scsi_transport_srp.c IB/srp: Avoid using uninitialized variable 2015-07-14 13:20:09 -04:00
scsi_typedefs.h
scsi.c scsi: use host wide tags by default 2015-11-09 17:11:57 -08:00
scsi.h
scsicam.c scsi: PC partition tables are little endian 2014-11-12 11:15:54 +01:00
sd_dif.c block: Consolidate static integrity profile properties 2015-10-21 14:42:38 -06:00
sd.c SCSI misc on 20151113 2015-11-13 20:35:54 -08:00
sd.h scsi: introduce sdev_prefix_printk() 2014-11-12 11:15:57 +01:00
ses.c ses: Add power_status to SES device slot 2015-01-09 15:44:19 +01:00
sg.c sg: Fix double-free when drives detach during SG_IO 2015-11-02 23:51:25 -05:00
sgiwd93.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sim710.c
sni_53c710.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sr_ioctl.c sr: reduce debug noise in sr_do_ioctl 2015-01-20 19:43:24 +01:00
sr_vendor.c scsi: Implement sr_printk() 2014-07-17 22:07:39 +02:00
sr.c scsi: remove scsi_driver owner field 2014-11-24 20:01:28 +01:00
sr.h scsi: introduce sdev_prefix_printk() 2014-11-12 11:15:57 +01:00
st_options.h
st.c st: allow debug output to be enabled or disabled via sysfs 2015-11-09 17:17:27 -08:00
st.h st: implement tape statistics 2015-06-02 08:03:25 -07:00
stex.c stex: Remove use of struct timeval 2015-11-09 17:42:19 -08:00
storvsc_drv.c scsi: storvsc: Fix a bug in the handling of SRB status flags 2015-11-09 16:29:42 -08:00
sun3_scsi_vme.c scsi/NCR5380: merge sun3_scsi_vme.c into sun3_scsi.c 2014-05-28 12:16:28 +02:00
sun3_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
sun3_scsi.h sun3_scsi: Move macro definitions 2014-11-20 09:11:15 +01:00
sun3x_esp.c arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> instead 2015-08-10 23:07:05 -04:00
sun_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sym53c416.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
sym53c416.h
t128.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
t128.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
u14-34f.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ultrastor.c
ultrastor.h
virtio_scsi.c virtio/vhost: fixes for 4.2 2015-07-23 13:07:04 -07:00
vmw_pvscsi.c vmw_pscsi: simplify ->change_queue_depth 2014-11-24 14:45:28 +01:00
vmw_pvscsi.h PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.h 2014-09-24 11:52:09 -06:00
wd33c93.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
wd33c93.h
wd719x.c [SCSI] Fix printk typos in drivers/scsi 2015-08-07 14:28:45 +02:00
wd719x.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
wd7000.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
xen-scsifront.c xen: Use correctly the Xen memory terminologies 2015-09-08 18:03:49 +01:00
zalon.c
zorro7xx.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00