mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 05:36:52 +07:00
51bf02cc50
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
725 lines
19 KiB
C
725 lines
19 KiB
C
/*
|
|
* wm8510.c -- WM8510 ALSA Soc Audio driver
|
|
*
|
|
* Copyright 2006 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
|
|
#include "wm8510.h"
|
|
|
|
/*
|
|
* wm8510 register cache
|
|
* We can't read the WM8510 register space when we are
|
|
* using 2 wire for device control, so we cache them instead.
|
|
*/
|
|
static const struct reg_default wm8510_reg_defaults[] = {
|
|
{ 1, 0x0000 },
|
|
{ 2, 0x0000 },
|
|
{ 3, 0x0000 },
|
|
{ 4, 0x0050 },
|
|
{ 5, 0x0000 },
|
|
{ 6, 0x0140 },
|
|
{ 7, 0x0000 },
|
|
{ 8, 0x0000 },
|
|
{ 9, 0x0000 },
|
|
{ 10, 0x0000 },
|
|
{ 11, 0x00ff },
|
|
{ 12, 0x0000 },
|
|
{ 13, 0x0000 },
|
|
{ 14, 0x0100 },
|
|
{ 15, 0x00ff },
|
|
{ 16, 0x0000 },
|
|
{ 17, 0x0000 },
|
|
{ 18, 0x012c },
|
|
{ 19, 0x002c },
|
|
{ 20, 0x002c },
|
|
{ 21, 0x002c },
|
|
{ 22, 0x002c },
|
|
{ 23, 0x0000 },
|
|
{ 24, 0x0032 },
|
|
{ 25, 0x0000 },
|
|
{ 26, 0x0000 },
|
|
{ 27, 0x0000 },
|
|
{ 28, 0x0000 },
|
|
{ 29, 0x0000 },
|
|
{ 30, 0x0000 },
|
|
{ 31, 0x0000 },
|
|
{ 32, 0x0038 },
|
|
{ 33, 0x000b },
|
|
{ 34, 0x0032 },
|
|
{ 35, 0x0000 },
|
|
{ 36, 0x0008 },
|
|
{ 37, 0x000c },
|
|
{ 38, 0x0093 },
|
|
{ 39, 0x00e9 },
|
|
{ 40, 0x0000 },
|
|
{ 41, 0x0000 },
|
|
{ 42, 0x0000 },
|
|
{ 43, 0x0000 },
|
|
{ 44, 0x0003 },
|
|
{ 45, 0x0010 },
|
|
{ 46, 0x0000 },
|
|
{ 47, 0x0000 },
|
|
{ 48, 0x0000 },
|
|
{ 49, 0x0002 },
|
|
{ 50, 0x0001 },
|
|
{ 51, 0x0000 },
|
|
{ 52, 0x0000 },
|
|
{ 53, 0x0000 },
|
|
{ 54, 0x0039 },
|
|
{ 55, 0x0000 },
|
|
{ 56, 0x0001 },
|
|
};
|
|
|
|
static bool wm8510_volatile(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case WM8510_RESET:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
#define WM8510_POWER1_BIASEN 0x08
|
|
#define WM8510_POWER1_BUFIOEN 0x10
|
|
|
|
#define wm8510_reset(c) snd_soc_component_write(c, WM8510_RESET, 0)
|
|
|
|
/* codec private data */
|
|
struct wm8510_priv {
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static const char *wm8510_companding[] = { "Off", "NC", "u-law", "A-law" };
|
|
static const char *wm8510_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
|
|
static const char *wm8510_alc[] = { "ALC", "Limiter" };
|
|
|
|
static const struct soc_enum wm8510_enum[] = {
|
|
SOC_ENUM_SINGLE(WM8510_COMP, 1, 4, wm8510_companding), /* adc */
|
|
SOC_ENUM_SINGLE(WM8510_COMP, 3, 4, wm8510_companding), /* dac */
|
|
SOC_ENUM_SINGLE(WM8510_DAC, 4, 4, wm8510_deemp),
|
|
SOC_ENUM_SINGLE(WM8510_ALC3, 8, 2, wm8510_alc),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8510_snd_controls[] = {
|
|
|
|
SOC_SINGLE("Digital Loopback Switch", WM8510_COMP, 0, 1, 0),
|
|
|
|
SOC_ENUM("DAC Companding", wm8510_enum[1]),
|
|
SOC_ENUM("ADC Companding", wm8510_enum[0]),
|
|
|
|
SOC_ENUM("Playback De-emphasis", wm8510_enum[2]),
|
|
SOC_SINGLE("DAC Inversion Switch", WM8510_DAC, 0, 1, 0),
|
|
|
|
SOC_SINGLE("Master Playback Volume", WM8510_DACVOL, 0, 127, 0),
|
|
|
|
SOC_SINGLE("High Pass Filter Switch", WM8510_ADC, 8, 1, 0),
|
|
SOC_SINGLE("High Pass Cut Off", WM8510_ADC, 4, 7, 0),
|
|
SOC_SINGLE("ADC Inversion Switch", WM8510_COMP, 0, 1, 0),
|
|
|
|
SOC_SINGLE("Capture Volume", WM8510_ADCVOL, 0, 127, 0),
|
|
|
|
SOC_SINGLE("DAC Playback Limiter Switch", WM8510_DACLIM1, 8, 1, 0),
|
|
SOC_SINGLE("DAC Playback Limiter Decay", WM8510_DACLIM1, 4, 15, 0),
|
|
SOC_SINGLE("DAC Playback Limiter Attack", WM8510_DACLIM1, 0, 15, 0),
|
|
|
|
SOC_SINGLE("DAC Playback Limiter Threshold", WM8510_DACLIM2, 4, 7, 0),
|
|
SOC_SINGLE("DAC Playback Limiter Boost", WM8510_DACLIM2, 0, 15, 0),
|
|
|
|
SOC_SINGLE("ALC Enable Switch", WM8510_ALC1, 8, 1, 0),
|
|
SOC_SINGLE("ALC Capture Max Gain", WM8510_ALC1, 3, 7, 0),
|
|
SOC_SINGLE("ALC Capture Min Gain", WM8510_ALC1, 0, 7, 0),
|
|
|
|
SOC_SINGLE("ALC Capture ZC Switch", WM8510_ALC2, 8, 1, 0),
|
|
SOC_SINGLE("ALC Capture Hold", WM8510_ALC2, 4, 7, 0),
|
|
SOC_SINGLE("ALC Capture Target", WM8510_ALC2, 0, 15, 0),
|
|
|
|
SOC_ENUM("ALC Capture Mode", wm8510_enum[3]),
|
|
SOC_SINGLE("ALC Capture Decay", WM8510_ALC3, 4, 15, 0),
|
|
SOC_SINGLE("ALC Capture Attack", WM8510_ALC3, 0, 15, 0),
|
|
|
|
SOC_SINGLE("ALC Capture Noise Gate Switch", WM8510_NGATE, 3, 1, 0),
|
|
SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8510_NGATE, 0, 7, 0),
|
|
|
|
SOC_SINGLE("Capture PGA ZC Switch", WM8510_INPPGA, 7, 1, 0),
|
|
SOC_SINGLE("Capture PGA Volume", WM8510_INPPGA, 0, 63, 0),
|
|
|
|
SOC_SINGLE("Speaker Playback ZC Switch", WM8510_SPKVOL, 7, 1, 0),
|
|
SOC_SINGLE("Speaker Playback Switch", WM8510_SPKVOL, 6, 1, 1),
|
|
SOC_SINGLE("Speaker Playback Volume", WM8510_SPKVOL, 0, 63, 0),
|
|
SOC_SINGLE("Speaker Boost", WM8510_OUTPUT, 2, 1, 0),
|
|
|
|
SOC_SINGLE("Capture Boost(+20dB)", WM8510_ADCBOOST, 8, 1, 0),
|
|
SOC_SINGLE("Mono Playback Switch", WM8510_MONOMIX, 6, 1, 1),
|
|
};
|
|
|
|
/* Speaker Output Mixer */
|
|
static const struct snd_kcontrol_new wm8510_speaker_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_SPKMIX, 1, 1, 0),
|
|
SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_SPKMIX, 5, 1, 0),
|
|
SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_SPKMIX, 0, 1, 0),
|
|
};
|
|
|
|
/* Mono Output Mixer */
|
|
static const struct snd_kcontrol_new wm8510_mono_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_MONOMIX, 1, 1, 0),
|
|
SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_MONOMIX, 2, 1, 0),
|
|
SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_MONOMIX, 0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8510_boost_controls[] = {
|
|
SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA, 6, 1, 1),
|
|
SOC_DAPM_SINGLE("Aux Volume", WM8510_ADCBOOST, 0, 7, 0),
|
|
SOC_DAPM_SINGLE("Mic Volume", WM8510_ADCBOOST, 4, 7, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8510_micpga_controls[] = {
|
|
SOC_DAPM_SINGLE("MICP Switch", WM8510_INPUT, 0, 1, 0),
|
|
SOC_DAPM_SINGLE("MICN Switch", WM8510_INPUT, 1, 1, 0),
|
|
SOC_DAPM_SINGLE("AUX Switch", WM8510_INPUT, 2, 1, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8510_dapm_widgets[] = {
|
|
SND_SOC_DAPM_MIXER("Speaker Mixer", WM8510_POWER3, 2, 0,
|
|
&wm8510_speaker_mixer_controls[0],
|
|
ARRAY_SIZE(wm8510_speaker_mixer_controls)),
|
|
SND_SOC_DAPM_MIXER("Mono Mixer", WM8510_POWER3, 3, 0,
|
|
&wm8510_mono_mixer_controls[0],
|
|
ARRAY_SIZE(wm8510_mono_mixer_controls)),
|
|
SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8510_POWER3, 0, 0),
|
|
SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8510_POWER2, 0, 0),
|
|
SND_SOC_DAPM_PGA("Aux Input", WM8510_POWER1, 6, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("SpkN Out", WM8510_POWER3, 5, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("SpkP Out", WM8510_POWER3, 6, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Mono Out", WM8510_POWER3, 7, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MIXER("Mic PGA", WM8510_POWER2, 2, 0,
|
|
&wm8510_micpga_controls[0],
|
|
ARRAY_SIZE(wm8510_micpga_controls)),
|
|
SND_SOC_DAPM_MIXER("Boost Mixer", WM8510_POWER2, 4, 0,
|
|
&wm8510_boost_controls[0],
|
|
ARRAY_SIZE(wm8510_boost_controls)),
|
|
|
|
SND_SOC_DAPM_MICBIAS("Mic Bias", WM8510_POWER1, 4, 0),
|
|
|
|
SND_SOC_DAPM_INPUT("MICN"),
|
|
SND_SOC_DAPM_INPUT("MICP"),
|
|
SND_SOC_DAPM_INPUT("AUX"),
|
|
SND_SOC_DAPM_OUTPUT("MONOOUT"),
|
|
SND_SOC_DAPM_OUTPUT("SPKOUTP"),
|
|
SND_SOC_DAPM_OUTPUT("SPKOUTN"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8510_dapm_routes[] = {
|
|
/* Mono output mixer */
|
|
{"Mono Mixer", "PCM Playback Switch", "DAC"},
|
|
{"Mono Mixer", "Aux Playback Switch", "Aux Input"},
|
|
{"Mono Mixer", "Line Bypass Switch", "Boost Mixer"},
|
|
|
|
/* Speaker output mixer */
|
|
{"Speaker Mixer", "PCM Playback Switch", "DAC"},
|
|
{"Speaker Mixer", "Aux Playback Switch", "Aux Input"},
|
|
{"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"},
|
|
|
|
/* Outputs */
|
|
{"Mono Out", NULL, "Mono Mixer"},
|
|
{"MONOOUT", NULL, "Mono Out"},
|
|
{"SpkN Out", NULL, "Speaker Mixer"},
|
|
{"SpkP Out", NULL, "Speaker Mixer"},
|
|
{"SPKOUTN", NULL, "SpkN Out"},
|
|
{"SPKOUTP", NULL, "SpkP Out"},
|
|
|
|
/* Microphone PGA */
|
|
{"Mic PGA", "MICN Switch", "MICN"},
|
|
{"Mic PGA", "MICP Switch", "MICP"},
|
|
{ "Mic PGA", "AUX Switch", "Aux Input" },
|
|
|
|
/* Boost Mixer */
|
|
{"Boost Mixer", "Mic PGA Switch", "Mic PGA"},
|
|
{"Boost Mixer", "Mic Volume", "MICP"},
|
|
{"Boost Mixer", "Aux Volume", "Aux Input"},
|
|
|
|
{"ADC", NULL, "Boost Mixer"},
|
|
};
|
|
|
|
struct pll_ {
|
|
unsigned int pre_div:4; /* prescale - 1 */
|
|
unsigned int n:4;
|
|
unsigned int k;
|
|
};
|
|
|
|
static struct pll_ pll_div;
|
|
|
|
/* The size in bits of the pll divide multiplied by 10
|
|
* to allow rounding later */
|
|
#define FIXED_PLL_SIZE ((1 << 24) * 10)
|
|
|
|
static void pll_factors(unsigned int target, unsigned int source)
|
|
{
|
|
unsigned long long Kpart;
|
|
unsigned int K, Ndiv, Nmod;
|
|
|
|
Ndiv = target / source;
|
|
if (Ndiv < 6) {
|
|
source >>= 1;
|
|
pll_div.pre_div = 1;
|
|
Ndiv = target / source;
|
|
} else
|
|
pll_div.pre_div = 0;
|
|
|
|
if ((Ndiv < 6) || (Ndiv > 12))
|
|
printk(KERN_WARNING
|
|
"WM8510 N value %u outwith recommended range!d\n",
|
|
Ndiv);
|
|
|
|
pll_div.n = Ndiv;
|
|
Nmod = target % source;
|
|
Kpart = FIXED_PLL_SIZE * (long long)Nmod;
|
|
|
|
do_div(Kpart, source);
|
|
|
|
K = Kpart & 0xFFFFFFFF;
|
|
|
|
/* Check if we need to round */
|
|
if ((K % 10) >= 5)
|
|
K += 5;
|
|
|
|
/* Move down to proper range now rounding is done */
|
|
K /= 10;
|
|
|
|
pll_div.k = K;
|
|
}
|
|
|
|
static int wm8510_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
|
|
int source, unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
u16 reg;
|
|
|
|
if (freq_in == 0 || freq_out == 0) {
|
|
/* Clock CODEC directly from MCLK */
|
|
reg = snd_soc_component_read32(component, WM8510_CLOCK);
|
|
snd_soc_component_write(component, WM8510_CLOCK, reg & 0x0ff);
|
|
|
|
/* Turn off PLL */
|
|
reg = snd_soc_component_read32(component, WM8510_POWER1);
|
|
snd_soc_component_write(component, WM8510_POWER1, reg & 0x1df);
|
|
return 0;
|
|
}
|
|
|
|
pll_factors(freq_out*4, freq_in);
|
|
|
|
snd_soc_component_write(component, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n);
|
|
snd_soc_component_write(component, WM8510_PLLK1, pll_div.k >> 18);
|
|
snd_soc_component_write(component, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff);
|
|
snd_soc_component_write(component, WM8510_PLLK3, pll_div.k & 0x1ff);
|
|
reg = snd_soc_component_read32(component, WM8510_POWER1);
|
|
snd_soc_component_write(component, WM8510_POWER1, reg | 0x020);
|
|
|
|
/* Run CODEC from PLL instead of MCLK */
|
|
reg = snd_soc_component_read32(component, WM8510_CLOCK);
|
|
snd_soc_component_write(component, WM8510_CLOCK, reg | 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configure WM8510 clock dividers.
|
|
*/
|
|
static int wm8510_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
|
|
int div_id, int div)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
u16 reg;
|
|
|
|
switch (div_id) {
|
|
case WM8510_OPCLKDIV:
|
|
reg = snd_soc_component_read32(component, WM8510_GPIO) & 0x1cf;
|
|
snd_soc_component_write(component, WM8510_GPIO, reg | div);
|
|
break;
|
|
case WM8510_MCLKDIV:
|
|
reg = snd_soc_component_read32(component, WM8510_CLOCK) & 0x11f;
|
|
snd_soc_component_write(component, WM8510_CLOCK, reg | div);
|
|
break;
|
|
case WM8510_ADCCLK:
|
|
reg = snd_soc_component_read32(component, WM8510_ADC) & 0x1f7;
|
|
snd_soc_component_write(component, WM8510_ADC, reg | div);
|
|
break;
|
|
case WM8510_DACCLK:
|
|
reg = snd_soc_component_read32(component, WM8510_DAC) & 0x1f7;
|
|
snd_soc_component_write(component, WM8510_DAC, reg | div);
|
|
break;
|
|
case WM8510_BCLKDIV:
|
|
reg = snd_soc_component_read32(component, WM8510_CLOCK) & 0x1e3;
|
|
snd_soc_component_write(component, WM8510_CLOCK, reg | div);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8510_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
u16 iface = 0;
|
|
u16 clk = snd_soc_component_read32(component, WM8510_CLOCK) & 0x1fe;
|
|
|
|
/* set master/slave audio interface */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
clk |= 0x0001;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* interface format */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
iface |= 0x0010;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
iface |= 0x0008;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
iface |= 0x00018;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* clock inversion */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
iface |= 0x0180;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
iface |= 0x0100;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
iface |= 0x0080;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_component_write(component, WM8510_IFACE, iface);
|
|
snd_soc_component_write(component, WM8510_CLOCK, clk);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
u16 iface = snd_soc_component_read32(component, WM8510_IFACE) & 0x19f;
|
|
u16 adn = snd_soc_component_read32(component, WM8510_ADD) & 0x1f1;
|
|
|
|
/* bit size */
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
break;
|
|
case 20:
|
|
iface |= 0x0020;
|
|
break;
|
|
case 24:
|
|
iface |= 0x0040;
|
|
break;
|
|
case 32:
|
|
iface |= 0x0060;
|
|
break;
|
|
}
|
|
|
|
/* filter coefficient */
|
|
switch (params_rate(params)) {
|
|
case 8000:
|
|
adn |= 0x5 << 1;
|
|
break;
|
|
case 11025:
|
|
adn |= 0x4 << 1;
|
|
break;
|
|
case 16000:
|
|
adn |= 0x3 << 1;
|
|
break;
|
|
case 22050:
|
|
adn |= 0x2 << 1;
|
|
break;
|
|
case 32000:
|
|
adn |= 0x1 << 1;
|
|
break;
|
|
case 44100:
|
|
case 48000:
|
|
break;
|
|
}
|
|
|
|
snd_soc_component_write(component, WM8510_IFACE, iface);
|
|
snd_soc_component_write(component, WM8510_ADD, adn);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8510_mute(struct snd_soc_dai *dai, int mute)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
u16 mute_reg = snd_soc_component_read32(component, WM8510_DAC) & 0xffbf;
|
|
|
|
if (mute)
|
|
snd_soc_component_write(component, WM8510_DAC, mute_reg | 0x40);
|
|
else
|
|
snd_soc_component_write(component, WM8510_DAC, mute_reg);
|
|
return 0;
|
|
}
|
|
|
|
/* liam need to make this lower power with dapm */
|
|
static int wm8510_set_bias_level(struct snd_soc_component *component,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct wm8510_priv *wm8510 = snd_soc_component_get_drvdata(component);
|
|
u16 power1 = snd_soc_component_read32(component, WM8510_POWER1) & ~0x3;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
case SND_SOC_BIAS_PREPARE:
|
|
power1 |= 0x1; /* VMID 50k */
|
|
snd_soc_component_write(component, WM8510_POWER1, power1);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
power1 |= WM8510_POWER1_BIASEN | WM8510_POWER1_BUFIOEN;
|
|
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
|
|
regcache_sync(wm8510->regmap);
|
|
|
|
/* Initial cap charge at VMID 5k */
|
|
snd_soc_component_write(component, WM8510_POWER1, power1 | 0x3);
|
|
mdelay(100);
|
|
}
|
|
|
|
power1 |= 0x2; /* VMID 500k */
|
|
snd_soc_component_write(component, WM8510_POWER1, power1);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
snd_soc_component_write(component, WM8510_POWER1, 0);
|
|
snd_soc_component_write(component, WM8510_POWER2, 0);
|
|
snd_soc_component_write(component, WM8510_POWER3, 0);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define WM8510_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
|
|
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
|
|
SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
|
|
|
|
#define WM8510_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops wm8510_dai_ops = {
|
|
.hw_params = wm8510_pcm_hw_params,
|
|
.digital_mute = wm8510_mute,
|
|
.set_fmt = wm8510_set_dai_fmt,
|
|
.set_clkdiv = wm8510_set_dai_clkdiv,
|
|
.set_pll = wm8510_set_dai_pll,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver wm8510_dai = {
|
|
.name = "wm8510-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8510_RATES,
|
|
.formats = WM8510_FORMATS,},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8510_RATES,
|
|
.formats = WM8510_FORMATS,},
|
|
.ops = &wm8510_dai_ops,
|
|
.symmetric_rates = 1,
|
|
};
|
|
|
|
static int wm8510_probe(struct snd_soc_component *component)
|
|
{
|
|
wm8510_reset(component);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_component_driver soc_component_dev_wm8510 = {
|
|
.probe = wm8510_probe,
|
|
.set_bias_level = wm8510_set_bias_level,
|
|
.controls = wm8510_snd_controls,
|
|
.num_controls = ARRAY_SIZE(wm8510_snd_controls),
|
|
.dapm_widgets = wm8510_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(wm8510_dapm_widgets),
|
|
.dapm_routes = wm8510_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(wm8510_dapm_routes),
|
|
.suspend_bias_off = 1,
|
|
.idle_bias_on = 1,
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static const struct of_device_id wm8510_of_match[] = {
|
|
{ .compatible = "wlf,wm8510" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, wm8510_of_match);
|
|
|
|
static const struct regmap_config wm8510_regmap = {
|
|
.reg_bits = 7,
|
|
.val_bits = 9,
|
|
.max_register = WM8510_MONOMIX,
|
|
|
|
.reg_defaults = wm8510_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(wm8510_reg_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
.volatile_reg = wm8510_volatile,
|
|
};
|
|
|
|
#if defined(CONFIG_SPI_MASTER)
|
|
static int wm8510_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct wm8510_priv *wm8510;
|
|
int ret;
|
|
|
|
wm8510 = devm_kzalloc(&spi->dev, sizeof(struct wm8510_priv),
|
|
GFP_KERNEL);
|
|
if (wm8510 == NULL)
|
|
return -ENOMEM;
|
|
|
|
wm8510->regmap = devm_regmap_init_spi(spi, &wm8510_regmap);
|
|
if (IS_ERR(wm8510->regmap))
|
|
return PTR_ERR(wm8510->regmap);
|
|
|
|
spi_set_drvdata(spi, wm8510);
|
|
|
|
ret = devm_snd_soc_register_component(&spi->dev,
|
|
&soc_component_dev_wm8510, &wm8510_dai, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct spi_driver wm8510_spi_driver = {
|
|
.driver = {
|
|
.name = "wm8510",
|
|
.of_match_table = wm8510_of_match,
|
|
},
|
|
.probe = wm8510_spi_probe,
|
|
};
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
static int wm8510_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8510_priv *wm8510;
|
|
int ret;
|
|
|
|
wm8510 = devm_kzalloc(&i2c->dev, sizeof(struct wm8510_priv),
|
|
GFP_KERNEL);
|
|
if (wm8510 == NULL)
|
|
return -ENOMEM;
|
|
|
|
wm8510->regmap = devm_regmap_init_i2c(i2c, &wm8510_regmap);
|
|
if (IS_ERR(wm8510->regmap))
|
|
return PTR_ERR(wm8510->regmap);
|
|
|
|
i2c_set_clientdata(i2c, wm8510);
|
|
|
|
ret = devm_snd_soc_register_component(&i2c->dev,
|
|
&soc_component_dev_wm8510, &wm8510_dai, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8510_i2c_id[] = {
|
|
{ "wm8510", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8510_i2c_id);
|
|
|
|
static struct i2c_driver wm8510_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8510",
|
|
.of_match_table = wm8510_of_match,
|
|
},
|
|
.probe = wm8510_i2c_probe,
|
|
.id_table = wm8510_i2c_id,
|
|
};
|
|
#endif
|
|
|
|
static int __init wm8510_modinit(void)
|
|
{
|
|
int ret = 0;
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
ret = i2c_add_driver(&wm8510_i2c_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register WM8510 I2C driver: %d\n",
|
|
ret);
|
|
}
|
|
#endif
|
|
#if defined(CONFIG_SPI_MASTER)
|
|
ret = spi_register_driver(&wm8510_spi_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register WM8510 SPI driver: %d\n",
|
|
ret);
|
|
}
|
|
#endif
|
|
return ret;
|
|
}
|
|
module_init(wm8510_modinit);
|
|
|
|
static void __exit wm8510_exit(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
i2c_del_driver(&wm8510_i2c_driver);
|
|
#endif
|
|
#if defined(CONFIG_SPI_MASTER)
|
|
spi_unregister_driver(&wm8510_spi_driver);
|
|
#endif
|
|
}
|
|
module_exit(wm8510_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8510 driver");
|
|
MODULE_AUTHOR("Liam Girdwood");
|
|
MODULE_LICENSE("GPL");
|