mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-27 01:40:56 +07:00
3a93f2a9f4
Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
444 lines
12 KiB
C
444 lines
12 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License Terms: GNU General Public License v2
|
|
*
|
|
* Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
|
|
*
|
|
* AB8500 peripheral regulators
|
|
*
|
|
* AB8500 supports the following regulators,
|
|
* LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
|
|
* VAUX1/2/3, VANA
|
|
*
|
|
* for DB8500 cut 1.0 and previous versions of the silicon, all accesses
|
|
* to registers are through the DB8500 SPI. In cut 1.1 onwards, these
|
|
* accesses are through the DB8500 PRCMU I2C
|
|
*
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/ab8500.h>
|
|
#include <linux/mfd/abx500.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/ab8500.h>
|
|
|
|
/**
|
|
* struct ab8500_regulator_info - ab8500 regulator information
|
|
* @desc: regulator description
|
|
* @ab8500: ab8500 parent
|
|
* @regulator_dev: regulator device
|
|
* @max_uV: maximum voltage (for variable voltage supplies)
|
|
* @min_uV: minimum voltage (for variable voltage supplies)
|
|
* @fixed_uV: typical voltage (for fixed voltage supplies)
|
|
* @update_bank: bank to control on/off
|
|
* @update_reg: register to control on/off
|
|
* @mask: mask to enable/disable regulator
|
|
* @enable: bits to enable the regulator in normal(high power) mode
|
|
* @voltage_bank: bank to control regulator voltage
|
|
* @voltage_reg: register to control regulator voltage
|
|
* @voltage_mask: mask to control regulator voltage
|
|
* @supported_voltages: supported voltage table
|
|
* @voltages_len: number of supported voltages for the regulator
|
|
*/
|
|
struct ab8500_regulator_info {
|
|
struct device *dev;
|
|
struct regulator_desc desc;
|
|
struct ab8500 *ab8500;
|
|
struct regulator_dev *regulator;
|
|
int max_uV;
|
|
int min_uV;
|
|
int fixed_uV;
|
|
u8 update_bank;
|
|
u8 update_reg;
|
|
u8 mask;
|
|
u8 enable;
|
|
u8 voltage_bank;
|
|
u8 voltage_reg;
|
|
u8 voltage_mask;
|
|
int const *supported_voltages;
|
|
int voltages_len;
|
|
};
|
|
|
|
/* voltage tables for the vauxn/vintcore supplies */
|
|
static const int ldo_vauxn_voltages[] = {
|
|
1100000,
|
|
1200000,
|
|
1300000,
|
|
1400000,
|
|
1500000,
|
|
1800000,
|
|
1850000,
|
|
1900000,
|
|
2500000,
|
|
2650000,
|
|
2700000,
|
|
2750000,
|
|
2800000,
|
|
2900000,
|
|
3000000,
|
|
3300000,
|
|
};
|
|
|
|
static const int ldo_vintcore_voltages[] = {
|
|
1200000,
|
|
1225000,
|
|
1250000,
|
|
1275000,
|
|
1300000,
|
|
1325000,
|
|
1350000,
|
|
};
|
|
|
|
static int ab8500_regulator_enable(struct regulator_dev *rdev)
|
|
{
|
|
int regulator_id, ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
regulator_id = rdev_get_id(rdev);
|
|
if (regulator_id >= AB8500_NUM_REGULATORS)
|
|
return -EINVAL;
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg, info->mask, info->enable);
|
|
if (ret < 0)
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set enable bits for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
static int ab8500_regulator_disable(struct regulator_dev *rdev)
|
|
{
|
|
int regulator_id, ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
regulator_id = rdev_get_id(rdev);
|
|
if (regulator_id >= AB8500_NUM_REGULATORS)
|
|
return -EINVAL;
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg, info->mask, 0x0);
|
|
if (ret < 0)
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set disable bits for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
int regulator_id, ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 value;
|
|
|
|
regulator_id = rdev_get_id(rdev);
|
|
if (regulator_id >= AB8500_NUM_REGULATORS)
|
|
return -EINVAL;
|
|
|
|
ret = abx500_get_register_interruptible(info->dev,
|
|
info->update_bank, info->update_reg, &value);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't read 0x%x register\n", info->update_reg);
|
|
return ret;
|
|
}
|
|
|
|
if (value & info->mask)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
|
|
{
|
|
int regulator_id;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
regulator_id = rdev_get_id(rdev);
|
|
if (regulator_id >= AB8500_NUM_REGULATORS)
|
|
return -EINVAL;
|
|
|
|
/* return the uV for the fixed regulators */
|
|
if (info->fixed_uV)
|
|
return info->fixed_uV;
|
|
|
|
if (selector >= info->voltages_len)
|
|
return -EINVAL;
|
|
|
|
return info->supported_voltages[selector];
|
|
}
|
|
|
|
static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
|
|
{
|
|
int regulator_id, ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
u8 value;
|
|
|
|
regulator_id = rdev_get_id(rdev);
|
|
if (regulator_id >= AB8500_NUM_REGULATORS)
|
|
return -EINVAL;
|
|
|
|
ret = abx500_get_register_interruptible(info->dev, info->voltage_bank,
|
|
info->voltage_reg, &value);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't read voltage reg for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
/* vintcore has a different layout */
|
|
value &= info->voltage_mask;
|
|
if (regulator_id == AB8500_LDO_INTCORE)
|
|
ret = info->supported_voltages[value >> 0x3];
|
|
else
|
|
ret = info->supported_voltages[value];
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
|
|
int min_uV, int max_uV)
|
|
{
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
int i;
|
|
|
|
/* check the supported voltage */
|
|
for (i = 0; i < info->voltages_len; i++) {
|
|
if ((info->supported_voltages[i] >= min_uV) &&
|
|
(info->supported_voltages[i] <= max_uV))
|
|
return i;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
|
|
int min_uV, int max_uV,
|
|
unsigned *selector)
|
|
{
|
|
int regulator_id, ret;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
regulator_id = rdev_get_id(rdev);
|
|
if (regulator_id >= AB8500_NUM_REGULATORS)
|
|
return -EINVAL;
|
|
|
|
/* get the appropriate voltages within the range */
|
|
ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
|
|
if (ret < 0) {
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't get best voltage for regulator\n");
|
|
return ret;
|
|
}
|
|
|
|
*selector = ret;
|
|
|
|
/* set the registers for the request */
|
|
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
|
info->voltage_bank, info->voltage_reg,
|
|
info->voltage_mask, (u8)ret);
|
|
if (ret < 0)
|
|
dev_err(rdev_get_dev(rdev),
|
|
"couldn't set voltage reg for regulator\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct regulator_ops ab8500_regulator_ops = {
|
|
.enable = ab8500_regulator_enable,
|
|
.disable = ab8500_regulator_disable,
|
|
.is_enabled = ab8500_regulator_is_enabled,
|
|
.get_voltage = ab8500_regulator_get_voltage,
|
|
.set_voltage = ab8500_regulator_set_voltage,
|
|
.list_voltage = ab8500_list_voltage,
|
|
};
|
|
|
|
static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
|
|
{
|
|
int regulator_id;
|
|
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
|
|
|
regulator_id = rdev_get_id(rdev);
|
|
if (regulator_id >= AB8500_NUM_REGULATORS)
|
|
return -EINVAL;
|
|
|
|
return info->fixed_uV;
|
|
}
|
|
|
|
static struct regulator_ops ab8500_ldo_fixed_ops = {
|
|
.enable = ab8500_regulator_enable,
|
|
.disable = ab8500_regulator_disable,
|
|
.is_enabled = ab8500_regulator_is_enabled,
|
|
.get_voltage = ab8500_fixed_get_voltage,
|
|
.list_voltage = ab8500_list_voltage,
|
|
};
|
|
|
|
#define AB8500_LDO(_id, min, max, bank, reg, reg_mask, \
|
|
reg_enable, volt_bank, volt_reg, volt_mask, \
|
|
voltages, len_volts) \
|
|
{ \
|
|
.desc = { \
|
|
.name = "LDO-" #_id, \
|
|
.ops = &ab8500_regulator_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = AB8500_LDO_##_id, \
|
|
.owner = THIS_MODULE, \
|
|
}, \
|
|
.min_uV = (min) * 1000, \
|
|
.max_uV = (max) * 1000, \
|
|
.update_bank = bank, \
|
|
.update_reg = reg, \
|
|
.mask = reg_mask, \
|
|
.enable = reg_enable, \
|
|
.voltage_bank = volt_bank, \
|
|
.voltage_reg = volt_reg, \
|
|
.voltage_mask = volt_mask, \
|
|
.supported_voltages = voltages, \
|
|
.voltages_len = len_volts, \
|
|
.fixed_uV = 0, \
|
|
}
|
|
|
|
#define AB8500_FIXED_LDO(_id, fixed, bank, reg, \
|
|
reg_mask, reg_enable) \
|
|
{ \
|
|
.desc = { \
|
|
.name = "LDO-" #_id, \
|
|
.ops = &ab8500_ldo_fixed_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.id = AB8500_LDO_##_id, \
|
|
.owner = THIS_MODULE, \
|
|
}, \
|
|
.fixed_uV = fixed * 1000, \
|
|
.update_bank = bank, \
|
|
.update_reg = reg, \
|
|
.mask = reg_mask, \
|
|
.enable = reg_enable, \
|
|
}
|
|
|
|
static struct ab8500_regulator_info ab8500_regulator_info[] = {
|
|
/*
|
|
* Variable Voltage LDOs
|
|
* name, min uV, max uV, ctrl bank, ctrl reg, reg mask, enable mask,
|
|
* volt ctrl bank, volt ctrl reg, volt ctrl mask, volt table,
|
|
* num supported volts
|
|
*/
|
|
AB8500_LDO(AUX1, 1100, 3300, 0x04, 0x09, 0x3, 0x1, 0x04, 0x1f, 0xf,
|
|
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
|
AB8500_LDO(AUX2, 1100, 3300, 0x04, 0x09, 0xc, 0x4, 0x04, 0x20, 0xf,
|
|
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
|
AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0xf,
|
|
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
|
AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x4, 0x4, 0x03, 0x80, 0x38,
|
|
ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
|
|
|
|
/*
|
|
* Fixed Voltage LDOs
|
|
* name, o/p uV, ctrl bank, ctrl reg, enable, disable
|
|
*/
|
|
AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x2, 0x2),
|
|
AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x2, 0x2),
|
|
AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x4, 0x4),
|
|
AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x8, 0x8),
|
|
AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x10, 0x10),
|
|
AB8500_FIXED_LDO(ANA, 1200, 0x03, 0x83, 0xc, 0x4),
|
|
};
|
|
|
|
static inline struct ab8500_regulator_info *find_regulator_info(int id)
|
|
{
|
|
struct ab8500_regulator_info *info;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
|
|
info = &ab8500_regulator_info[i];
|
|
if (info->desc.id == id)
|
|
return info;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
|
|
struct ab8500_platform_data *pdata;
|
|
int i, err;
|
|
|
|
if (!ab8500) {
|
|
dev_err(&pdev->dev, "null mfd parent\n");
|
|
return -EINVAL;
|
|
}
|
|
pdata = dev_get_platdata(ab8500->dev);
|
|
|
|
/* register all regulators */
|
|
for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
|
|
struct ab8500_regulator_info *info = NULL;
|
|
|
|
/* assign per-regulator data */
|
|
info = &ab8500_regulator_info[i];
|
|
info->dev = &pdev->dev;
|
|
info->ab8500 = ab8500;
|
|
|
|
info->regulator = regulator_register(&info->desc, &pdev->dev,
|
|
pdata->regulator[i], info);
|
|
if (IS_ERR(info->regulator)) {
|
|
err = PTR_ERR(info->regulator);
|
|
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
|
info->desc.name);
|
|
/* when we fail, un-register all earlier regulators */
|
|
while (--i >= 0) {
|
|
info = &ab8500_regulator_info[i];
|
|
regulator_unregister(info->regulator);
|
|
}
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
|
|
struct ab8500_regulator_info *info = NULL;
|
|
info = &ab8500_regulator_info[i];
|
|
regulator_unregister(info->regulator);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ab8500_regulator_driver = {
|
|
.probe = ab8500_regulator_probe,
|
|
.remove = __devexit_p(ab8500_regulator_remove),
|
|
.driver = {
|
|
.name = "ab8500-regulator",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init ab8500_regulator_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = platform_driver_register(&ab8500_regulator_driver);
|
|
if (ret != 0)
|
|
pr_err("Failed to register ab8500 regulator: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
subsys_initcall(ab8500_regulator_init);
|
|
|
|
static void __exit ab8500_regulator_exit(void)
|
|
{
|
|
platform_driver_unregister(&ab8500_regulator_driver);
|
|
}
|
|
module_exit(ab8500_regulator_exit);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
|
|
MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
|
|
MODULE_ALIAS("platform:ab8500-regulator");
|