mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 02:43:03 +07:00
8aa2fca834
Add GPIO line names for HiSilicon HiKey970 board based on HI3670 SoC. The Line names are derived from "hikey970-schematics.pdf" document and named in conjunction with 96Boards CE Specification v1.0. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
374 lines
8.3 KiB
Plaintext
374 lines
8.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* dts file for Hisilicon HiKey970 Development Board
|
|
*
|
|
* Copyright (C) 2016, Hisilicon Ltd.
|
|
* Copyright (C) 2018, Linaro Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "hi3670.dtsi"
|
|
#include "hikey970-pinctrl.dtsi"
|
|
|
|
/ {
|
|
model = "HiKey970";
|
|
compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &uart5;
|
|
serial6 = &uart6; /* console UART */
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial6:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
/* expect bootloader to fill in this region */
|
|
reg = <0x0 0x0 0x0 0x0>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Legend: proper name = the GPIO line is used as GPIO
|
|
* NC = not connected (pin out but not routed from the chip to
|
|
* anything the board)
|
|
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
|
|
* "" = no idea, schematic doesn't say, could be
|
|
* unrouted (not connected to any external pin)
|
|
* LSEC = Low Speed External Connector
|
|
* HSEC = High Speed External Connector
|
|
*
|
|
* Line names are taken from "hikey970-schematics.pdf" from HiSilicon.
|
|
*
|
|
* For the lines routed to the external connectors the
|
|
* lines are named after the 96Boards CE Specification 1.0,
|
|
* Appendix "Expansion Connector Signal Description".
|
|
*
|
|
* When the 96Board naming of a line and the schematic name of
|
|
* the same line are in conflict, the 96Board specification
|
|
* takes precedence, which means that the external UART on the
|
|
* LSEC is named UART0 while the schematic and SoC names this
|
|
* UART2. This is only for the informational lines i.e. "[FOO]",
|
|
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
|
|
* ones actually used for GPIO.
|
|
*/
|
|
&gpio0 {
|
|
/* GPIO_000-GPIO_007 */
|
|
gpio-line-names =
|
|
"",
|
|
"TP901", /* TEST_MODE connected to TP901 */
|
|
"",
|
|
"GPIO_003_USB_HUB_RESET_N",
|
|
"NC",
|
|
"[AP_GPS_REF_CLK]",
|
|
"[I2C3_SCL]",
|
|
"[I2C3_SDA]";
|
|
};
|
|
|
|
&gpio1 {
|
|
/* GPIO_008-GPIO_015 */
|
|
gpio-line-names =
|
|
"[UART0_CTS]", /* LSEC pin 3: GPIO_008_UART2_CTS_N */
|
|
"[UART0_RTS]", /* LSEC pin 9: GPIO_009_UART2_RTS_N */
|
|
"[UART0_TXD]", /* LSEC pin 5: GPIO_010_UART2_TXD */
|
|
"[UART0_RXD]", /* LSEC pin 7: GPIO_011_UART2_RXD */
|
|
"[USER_LED5]",
|
|
"GPIO-I", /* LSEC pin 31: GPIO_013_CAM0_RST_N */
|
|
"[USER_LED3]",
|
|
"[USER_LED4]";
|
|
};
|
|
|
|
&gpio2 {
|
|
/* GPIO_016-GPIO_023 */
|
|
gpio-line-names =
|
|
"GPIO-G", /* LSEC pin 29: GPIO_016_LCD_TE0 */
|
|
"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
|
|
"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
|
|
"GPIO_019_BT_ACTIVE",
|
|
"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
|
|
"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
|
|
"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
|
|
"[I2C3_SDA]"; /* HSEC pin 38: ISP_SDA1 */
|
|
};
|
|
|
|
&gpio3 {
|
|
/* GPIO_024-GPIO_031 */
|
|
gpio-line-names =
|
|
"GPIO_024_WIFI_ACTIVE",
|
|
"GPIO_025_PERST_M.2",
|
|
"[I2C4_SCL]",
|
|
"[I2C4_SDA]",
|
|
"NC",
|
|
"GPIO-H", /* LSEC pin 30: GPIO_029_LCD_RST_N */
|
|
"[USER_LED1]",
|
|
"GPIO-L"; /* LSEC pin 34: GPIO_031 */
|
|
};
|
|
|
|
&gpio4 {
|
|
/* GPIO_032-GPIO_039 */
|
|
gpio-line-names =
|
|
"GPIO-K", /* LSEC pin 33: GPIO_032_CAM1_RST_N */
|
|
"GPIO_033_PMU1_EN",
|
|
"GPIO_034_USBSW_SEL",
|
|
/*
|
|
* These two pins should be used for SD(IO) data according
|
|
* to the 96boards specification but seems to be repurposed
|
|
* for UART 0. They are however named according to the spec.
|
|
*/
|
|
"[SD_DAT1]", /* HSEC pin 3: GPIO_035_UART0_RXD */
|
|
"[SD_DAT2]", /* HSEC pin 5: GPIO_036_UART0_TXD */
|
|
"[UART1_RXD]", /* LSEC pin 13: DEBUG_UART6_RXD */
|
|
"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
|
|
"[SOC_GPS_UART3_CTS_N]"; /* TP2304 */
|
|
};
|
|
|
|
&gpio5 {
|
|
/* GPIO_040-GPIO_047 */
|
|
gpio-line-names =
|
|
"[SOC_GPS_UART3_RTS_N]", /* TP2302 */
|
|
"[SOC_GPS_UART3_RXD]", /* TP2303 */
|
|
"[SOC_GPS_UART3_TXD]", /* TP2305 */
|
|
"[SOC_BT_UART4_CTS_N]",
|
|
"[SOC_BT_UART4_RTS_N]",
|
|
"[SOC_BT_UART4_RXD]",
|
|
"[SOC_BT_UART4_TXD]",
|
|
"NC";
|
|
};
|
|
|
|
&gpio6 {
|
|
/* GPIO_048-GPIO_055 */
|
|
gpio-line-names =
|
|
"NC",
|
|
"GPIO_049_USER_LED6",
|
|
"GPIO_050_CAN_RST",
|
|
"GPIO_051_WIFI_EN",
|
|
"GPIO-D", /* LSEC pin 26 */
|
|
"GPIO-J", /* LSEC pin 32 */
|
|
"GPIO_054_BT_EN",
|
|
"[GPIO_055_SEL]";
|
|
};
|
|
|
|
&gpio7 {
|
|
/* GPIO_056-GPIO_063 */
|
|
gpio-line-names =
|
|
"[PCIE_PERST_L]", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio8 {
|
|
/* GPIO_064-GPIO_071 */
|
|
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio9 {
|
|
/* GPIO_072-GPIO_079 */
|
|
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio10 {
|
|
/* GPIO_080-GPIO_087 */
|
|
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio11 {
|
|
/* GPIO_088-GPIO_095 */
|
|
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
|
|
};
|
|
|
|
&gpio12 {
|
|
/* GPIO_096-GPIO_103 */
|
|
gpio-line-names = "NC", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio13 {
|
|
/* GPIO_104-GPIO_111 */
|
|
gpio-line-names = "", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio14 {
|
|
/* GPIO_112-GPIO_119 */
|
|
gpio-line-names = "", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio15 {
|
|
/* GPIO_120-GPIO_127 */
|
|
gpio-line-names = "", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio16 {
|
|
/* GPIO_128-GPIO_135 */
|
|
gpio-line-names =
|
|
"[WL_SDIO_CLK]",
|
|
"[WL_SDIO_CMD]",
|
|
"[WL_SDIO_DATA0]",
|
|
"[WL_SDIO_DATA1]",
|
|
"[WL_SDIO_DATA2]",
|
|
"[WL_SDIO_DATA3]",
|
|
"[ETH_ISOLATE]",
|
|
"NC";
|
|
};
|
|
|
|
&gpio17 {
|
|
/* GPIO_136-GPIO_143 */
|
|
gpio-line-names =
|
|
"[MINI1CLK_EN]", "NC", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio18 {
|
|
/* GPIO_144-GPIO_151 */
|
|
gpio-line-names =
|
|
"[SPI1_SCLK]", /* HSEC pin 9: GPIO_144_SPI3_CLK */
|
|
"[SPI1_DIN]", /* HSEC pin 11: GPIO_145_SPI3_DI */
|
|
"[SPI1_DOUT]", /* HSEC pin 1: GPIO_146_SPI3_DO */
|
|
"[SPI1_CS]", /* HSEC pin 7: GPIO_147_SPI3_CS0_N */
|
|
"[POWER_INT_N]",
|
|
"[CDMA_GPS_SYNC]",
|
|
"GPIO_150_PEX_INTA",
|
|
"GPIO_151_CAN_INT";
|
|
};
|
|
|
|
&gpio19 {
|
|
/* GPIO_152-GPIO_159 */
|
|
gpio-line-names = "", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio20 {
|
|
/* GPIO_160-GPIO_167 */
|
|
gpio-line-names =
|
|
"[SD_CLK]",
|
|
"[SD_CMD]",
|
|
"[SD_DATA0]",
|
|
"[SD_DATA1]",
|
|
"[SD_DATA2]",
|
|
"[SD_DATA3]",
|
|
"GPIO_166_ETHCLK_EN",
|
|
"GPIO_167_USER_LED2";
|
|
};
|
|
|
|
&gpio21 {
|
|
/* GPIO_168-GPIO_175 */
|
|
gpio-line-names =
|
|
"GPIO_168_GPS_EN",
|
|
"GPIO-C", /* LSEC pin 25: GPIO_169_USIM1_CLK */
|
|
"GPIO-E", /* LSEC pin 27: GPIO_170_USIM1_RST */
|
|
"GPIO-B", /* LSEC pin 24: GPIO_171_USIM1_DATA */
|
|
"", "", "", "", "";
|
|
};
|
|
|
|
&gpio22 {
|
|
/* GPIO_176-GPIO_183 */
|
|
gpio-line-names =
|
|
"[PMU_PWR_HOLD]",
|
|
"GPIO_177_WL_WAKEUP_AP",
|
|
"[JTAG_TCK]",
|
|
"[JTAG_TMS]",
|
|
"[JTAG_TDI]",
|
|
"[JTAG_TMS]",
|
|
"GPIO_182_FATAL_ERR",
|
|
"NC";
|
|
};
|
|
|
|
&gpio23 {
|
|
/* GPIO_184-GPIO_191 */
|
|
gpio-line-names =
|
|
"GPIO_184_JTAG_SEL",
|
|
"GPIO-F", /* LSEC pin 28: GPIO_185_LCD_BL_PWM */
|
|
"[I2C0_SCL]", /* LSEC pin 15: GPIO_186_I2C0_SCL */
|
|
"[I2C0_SDA]", /* LSEC pin 17: GPIO_187_I2C0_SDA */
|
|
"[GPIO_188_I2C1_SCL]", /* Actual SoC I2C1_SCL */
|
|
"[GPIO_189_I2C1_SDA]", /* Actual SoC I2C1_SDA */
|
|
"[I2C1_SCL]", /* LSEC pin 19: GPIO_190_I2C2_SCL */
|
|
"[I2C2_SDA]"; /* LSEC pin 21: GPIO_191_I2C2_SDA */
|
|
};
|
|
|
|
&gpio24 {
|
|
/* GPIO_192-GPIO_199 */
|
|
gpio-line-names =
|
|
"[SD_LED]",
|
|
"NC",
|
|
"[PCM_DI]", /* LSEC pin 22: GPIO_194_I2S0_DI */
|
|
"[PCM_DO]", /* LSEC pin 20: GPIO_195_I2S0_DO */
|
|
"[PCM_CLK]", /* LSEC pin 18: GPIO_196_I2S0_XCLK */
|
|
"[PCM_FS]", /* LSEC pin 16: GPIO_197_I2S0_XFS */
|
|
"",
|
|
"[I2S2_DO]";
|
|
};
|
|
|
|
&gpio25 {
|
|
/* GPIO_200-GPIO_207 */
|
|
gpio-line-names =
|
|
"[I2S2_XCLK]",
|
|
"[I2S2_XFS]",
|
|
"GPIO_202_PERST_ETH",
|
|
"GPIO_203_PWRON_DET",
|
|
"GPIO_204_PMU1_IRQ_N",
|
|
"GPIO_205_SD_DET",
|
|
"GPIO_206_GPS_MOTION_INT",
|
|
"GPIO_207_HDMI_SEL";
|
|
};
|
|
|
|
&gpio26 {
|
|
/* GPIO_208-GPIO_215 */
|
|
gpio-line-names =
|
|
"GPIO-A", /* LSEC pin 23: GPIO_208_WAKEUP_SOC */
|
|
"GPIO_209_VBUS_TYPEC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"[SPI0_SCLK]", /* LSEC pin 8: GPIO_213_SPI2_CLK */
|
|
"[SPI0_DIN]", /* LSEC pin 10: GPIO_214_SPI2_DI */
|
|
"[SPI0_DOUT]"; /* LSEC pin 14: GPIO_215_SPI2_DO */
|
|
};
|
|
|
|
&gpio27 {
|
|
/* GPIO_216-GPIO_223 */
|
|
gpio-line-names =
|
|
"[SPI0_CS]", /* LSEC pin 12: GPIO_216_SPI2_CS0_N */
|
|
"GPIO_217_HDMI_PD",
|
|
"GPIO_218_GPS_WAKEUP_AP",
|
|
"GPIO_219_M.2CLK_EN",
|
|
"GPIO_220_PERST_MINI",
|
|
"GPIO_221_CC_INT",
|
|
"[PCIE_CLKREQ_L]",
|
|
"NC";
|
|
};
|
|
|
|
&gpio28 {
|
|
/* GPIO_224-GPIO_231 */
|
|
gpio-line-names =
|
|
"[PMU0_INT]",
|
|
"[SPMI_DATA]",
|
|
"[SPMI_CLK]",
|
|
"[CAN_SPI_CLK]",
|
|
"[CAN_SPI_DI]",
|
|
"[CAN_SPI_DO]",
|
|
"[CAN_SPI_CS]",
|
|
"GPIO_231_HDMI_INT";
|
|
};
|
|
|
|
&uart0 {
|
|
/* On High speed expansion header */
|
|
label = "HS-UART0";
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
/* On Low speed expansion header */
|
|
label = "LS-UART0";
|
|
status = "okay";
|
|
};
|
|
|
|
&uart6 {
|
|
/* On Low speed expansion header */
|
|
label = "LS-UART1";
|
|
status = "okay";
|
|
};
|