linux_dsm_epyc7002/kernel/exit.c
David Howells d84f4f992c CRED: Inaugurate COW credentials
Inaugurate copy-on-write credentials management.  This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.

A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().

With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:

	struct cred *new = prepare_creds();
	int ret = blah(new);
	if (ret < 0) {
		abort_creds(new);
		return ret;
	}
	return commit_creds(new);

There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.

To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const.  The purpose of this is compile-time
discouragement of altering credentials through those pointers.  Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:

  (1) Its reference count may incremented and decremented.

  (2) The keyrings to which it points may be modified, but not replaced.

The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     This now prepares and commits credentials in various places in the
     security code rather than altering the current creds directly.

 (2) Temporary credential overrides.

     do_coredump() and sys_faccessat() now prepare their own credentials and
     temporarily override the ones currently on the acting thread, whilst
     preventing interference from other threads by holding cred_replace_mutex
     on the thread being dumped.

     This will be replaced in a future patch by something that hands down the
     credentials directly to the functions being called, rather than altering
     the task's objective credentials.

 (3) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_capset_check(), ->capset_check()
     (*) security_capset_set(), ->capset_set()

     	 Removed in favour of security_capset().

     (*) security_capset(), ->capset()

     	 New.  This is passed a pointer to the new creds, a pointer to the old
     	 creds and the proposed capability sets.  It should fill in the new
     	 creds or return an error.  All pointers, barring the pointer to the
     	 new creds, are now const.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()

     	 Changed; now returns a value, which will cause the process to be
     	 killed if it's an error.

     (*) security_task_alloc(), ->task_alloc_security()

     	 Removed in favour of security_prepare_creds().

     (*) security_cred_free(), ->cred_free()

     	 New.  Free security data attached to cred->security.

     (*) security_prepare_creds(), ->cred_prepare()

     	 New. Duplicate any security data attached to cred->security.

     (*) security_commit_creds(), ->cred_commit()

     	 New. Apply any security effects for the upcoming installation of new
     	 security by commit_creds().

     (*) security_task_post_setuid(), ->task_post_setuid()

     	 Removed in favour of security_task_fix_setuid().

     (*) security_task_fix_setuid(), ->task_fix_setuid()

     	 Fix up the proposed new credentials for setuid().  This is used by
     	 cap_set_fix_setuid() to implicitly adjust capabilities in line with
     	 setuid() changes.  Changes are made to the new credentials, rather
     	 than the task itself as in security_task_post_setuid().

     (*) security_task_reparent_to_init(), ->task_reparent_to_init()

     	 Removed.  Instead the task being reparented to init is referred
     	 directly to init's credentials.

	 NOTE!  This results in the loss of some state: SELinux's osid no
	 longer records the sid of the thread that forked it.

     (*) security_key_alloc(), ->key_alloc()
     (*) security_key_permission(), ->key_permission()

     	 Changed.  These now take cred pointers rather than task pointers to
     	 refer to the security context.

 (4) sys_capset().

     This has been simplified and uses less locking.  The LSM functions it
     calls have been merged.

 (5) reparent_to_kthreadd().

     This gives the current thread the same credentials as init by simply using
     commit_thread() to point that way.

 (6) __sigqueue_alloc() and switch_uid()

     __sigqueue_alloc() can't stop the target task from changing its creds
     beneath it, so this function gets a reference to the currently applicable
     user_struct which it then passes into the sigqueue struct it returns if
     successful.

     switch_uid() is now called from commit_creds(), and possibly should be
     folded into that.  commit_creds() should take care of protecting
     __sigqueue_alloc().

 (7) [sg]et[ug]id() and co and [sg]et_current_groups.

     The set functions now all use prepare_creds(), commit_creds() and
     abort_creds() to build and check a new set of credentials before applying
     it.

     security_task_set[ug]id() is called inside the prepared section.  This
     guarantees that nothing else will affect the creds until we've finished.

     The calling of set_dumpable() has been moved into commit_creds().

     Much of the functionality of set_user() has been moved into
     commit_creds().

     The get functions all simply access the data directly.

 (8) security_task_prctl() and cap_task_prctl().

     security_task_prctl() has been modified to return -ENOSYS if it doesn't
     want to handle a function, or otherwise return the return value directly
     rather than through an argument.

     Additionally, cap_task_prctl() now prepares a new set of credentials, even
     if it doesn't end up using it.

 (9) Keyrings.

     A number of changes have been made to the keyrings code:

     (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
     	 all been dropped and built in to the credentials functions directly.
     	 They may want separating out again later.

     (b) key_alloc() and search_process_keyrings() now take a cred pointer
     	 rather than a task pointer to specify the security context.

     (c) copy_creds() gives a new thread within the same thread group a new
     	 thread keyring if its parent had one, otherwise it discards the thread
     	 keyring.

     (d) The authorisation key now points directly to the credentials to extend
     	 the search into rather pointing to the task that carries them.

     (e) Installing thread, process or session keyrings causes a new set of
     	 credentials to be created, even though it's not strictly necessary for
     	 process or session keyrings (they're shared).

(10) Usermode helper.

     The usermode helper code now carries a cred struct pointer in its
     subprocess_info struct instead of a new session keyring pointer.  This set
     of credentials is derived from init_cred and installed on the new process
     after it has been cloned.

     call_usermodehelper_setup() allocates the new credentials and
     call_usermodehelper_freeinfo() discards them if they haven't been used.  A
     special cred function (prepare_usermodeinfo_creds()) is provided
     specifically for call_usermodehelper_setup() to call.

     call_usermodehelper_setkeys() adjusts the credentials to sport the
     supplied keyring as the new session keyring.

(11) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) selinux_setprocattr() no longer does its check for whether the
     	 current ptracer can access processes with the new SID inside the lock
     	 that covers getting the ptracer's SID.  Whilst this lock ensures that
     	 the check is done with the ptracer pinned, the result is only valid
     	 until the lock is released, so there's no point doing it inside the
     	 lock.

(12) is_single_threaded().

     This function has been extracted from selinux_setprocattr() and put into
     a file of its own in the lib/ directory as join_session_keyring() now
     wants to use it too.

     The code in SELinux just checked to see whether a task shared mm_structs
     with other tasks (CLONE_VM), but that isn't good enough.  We really want
     to know if they're part of the same thread group (CLONE_THREAD).

(13) nfsd.

     The NFS server daemon now has to use the COW credentials to set the
     credentials it is going to use.  It really needs to pass the credentials
     down to the functions it calls, but it can't do that until other patches
     in this series have been applied.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:23 +11:00

1850 lines
46 KiB
C

/*
* linux/kernel/exit.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/capability.h>
#include <linux/completion.h>
#include <linux/personality.h>
#include <linux/tty.h>
#include <linux/mnt_namespace.h>
#include <linux/iocontext.h>
#include <linux/key.h>
#include <linux/security.h>
#include <linux/cpu.h>
#include <linux/acct.h>
#include <linux/tsacct_kern.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/binfmts.h>
#include <linux/nsproxy.h>
#include <linux/pid_namespace.h>
#include <linux/ptrace.h>
#include <linux/profile.h>
#include <linux/mount.h>
#include <linux/proc_fs.h>
#include <linux/kthread.h>
#include <linux/mempolicy.h>
#include <linux/taskstats_kern.h>
#include <linux/delayacct.h>
#include <linux/freezer.h>
#include <linux/cgroup.h>
#include <linux/syscalls.h>
#include <linux/signal.h>
#include <linux/posix-timers.h>
#include <linux/cn_proc.h>
#include <linux/mutex.h>
#include <linux/futex.h>
#include <linux/compat.h>
#include <linux/pipe_fs_i.h>
#include <linux/audit.h> /* for audit_free() */
#include <linux/resource.h>
#include <linux/blkdev.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/tracehook.h>
#include <linux/init_task.h>
#include <trace/sched.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/pgtable.h>
#include <asm/mmu_context.h>
#include "cred-internals.h"
static void exit_mm(struct task_struct * tsk);
static inline int task_detached(struct task_struct *p)
{
return p->exit_signal == -1;
}
static void __unhash_process(struct task_struct *p)
{
nr_threads--;
detach_pid(p, PIDTYPE_PID);
if (thread_group_leader(p)) {
detach_pid(p, PIDTYPE_PGID);
detach_pid(p, PIDTYPE_SID);
list_del_rcu(&p->tasks);
__get_cpu_var(process_counts)--;
}
list_del_rcu(&p->thread_group);
list_del_init(&p->sibling);
}
/*
* This function expects the tasklist_lock write-locked.
*/
static void __exit_signal(struct task_struct *tsk)
{
struct signal_struct *sig = tsk->signal;
struct sighand_struct *sighand;
BUG_ON(!sig);
BUG_ON(!atomic_read(&sig->count));
sighand = rcu_dereference(tsk->sighand);
spin_lock(&sighand->siglock);
posix_cpu_timers_exit(tsk);
if (atomic_dec_and_test(&sig->count))
posix_cpu_timers_exit_group(tsk);
else {
/*
* If there is any task waiting for the group exit
* then notify it:
*/
if (sig->group_exit_task && atomic_read(&sig->count) == sig->notify_count)
wake_up_process(sig->group_exit_task);
if (tsk == sig->curr_target)
sig->curr_target = next_thread(tsk);
/*
* Accumulate here the counters for all threads but the
* group leader as they die, so they can be added into
* the process-wide totals when those are taken.
* The group leader stays around as a zombie as long
* as there are other threads. When it gets reaped,
* the exit.c code will add its counts into these totals.
* We won't ever get here for the group leader, since it
* will have been the last reference on the signal_struct.
*/
sig->gtime = cputime_add(sig->gtime, task_gtime(tsk));
sig->min_flt += tsk->min_flt;
sig->maj_flt += tsk->maj_flt;
sig->nvcsw += tsk->nvcsw;
sig->nivcsw += tsk->nivcsw;
sig->inblock += task_io_get_inblock(tsk);
sig->oublock += task_io_get_oublock(tsk);
task_io_accounting_add(&sig->ioac, &tsk->ioac);
sig = NULL; /* Marker for below. */
}
__unhash_process(tsk);
/*
* Do this under ->siglock, we can race with another thread
* doing sigqueue_free() if we have SIGQUEUE_PREALLOC signals.
*/
flush_sigqueue(&tsk->pending);
tsk->signal = NULL;
tsk->sighand = NULL;
spin_unlock(&sighand->siglock);
__cleanup_sighand(sighand);
clear_tsk_thread_flag(tsk,TIF_SIGPENDING);
if (sig) {
flush_sigqueue(&sig->shared_pending);
taskstats_tgid_free(sig);
__cleanup_signal(sig);
}
}
static void delayed_put_task_struct(struct rcu_head *rhp)
{
struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
trace_sched_process_free(tsk);
put_task_struct(tsk);
}
void release_task(struct task_struct * p)
{
struct task_struct *leader;
int zap_leader;
repeat:
tracehook_prepare_release_task(p);
/* don't need to get the RCU readlock here - the process is dead and
* can't be modifying its own credentials */
atomic_dec(&__task_cred(p)->user->processes);
proc_flush_task(p);
write_lock_irq(&tasklist_lock);
tracehook_finish_release_task(p);
__exit_signal(p);
/*
* If we are the last non-leader member of the thread
* group, and the leader is zombie, then notify the
* group leader's parent process. (if it wants notification.)
*/
zap_leader = 0;
leader = p->group_leader;
if (leader != p && thread_group_empty(leader) && leader->exit_state == EXIT_ZOMBIE) {
BUG_ON(task_detached(leader));
do_notify_parent(leader, leader->exit_signal);
/*
* If we were the last child thread and the leader has
* exited already, and the leader's parent ignores SIGCHLD,
* then we are the one who should release the leader.
*
* do_notify_parent() will have marked it self-reaping in
* that case.
*/
zap_leader = task_detached(leader);
/*
* This maintains the invariant that release_task()
* only runs on a task in EXIT_DEAD, just for sanity.
*/
if (zap_leader)
leader->exit_state = EXIT_DEAD;
}
write_unlock_irq(&tasklist_lock);
release_thread(p);
call_rcu(&p->rcu, delayed_put_task_struct);
p = leader;
if (unlikely(zap_leader))
goto repeat;
}
/*
* This checks not only the pgrp, but falls back on the pid if no
* satisfactory pgrp is found. I dunno - gdb doesn't work correctly
* without this...
*
* The caller must hold rcu lock or the tasklist lock.
*/
struct pid *session_of_pgrp(struct pid *pgrp)
{
struct task_struct *p;
struct pid *sid = NULL;
p = pid_task(pgrp, PIDTYPE_PGID);
if (p == NULL)
p = pid_task(pgrp, PIDTYPE_PID);
if (p != NULL)
sid = task_session(p);
return sid;
}
/*
* Determine if a process group is "orphaned", according to the POSIX
* definition in 2.2.2.52. Orphaned process groups are not to be affected
* by terminal-generated stop signals. Newly orphaned process groups are
* to receive a SIGHUP and a SIGCONT.
*
* "I ask you, have you ever known what it is to be an orphan?"
*/
static int will_become_orphaned_pgrp(struct pid *pgrp, struct task_struct *ignored_task)
{
struct task_struct *p;
do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
if ((p == ignored_task) ||
(p->exit_state && thread_group_empty(p)) ||
is_global_init(p->real_parent))
continue;
if (task_pgrp(p->real_parent) != pgrp &&
task_session(p->real_parent) == task_session(p))
return 0;
} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
return 1;
}
int is_current_pgrp_orphaned(void)
{
int retval;
read_lock(&tasklist_lock);
retval = will_become_orphaned_pgrp(task_pgrp(current), NULL);
read_unlock(&tasklist_lock);
return retval;
}
static int has_stopped_jobs(struct pid *pgrp)
{
int retval = 0;
struct task_struct *p;
do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
if (!task_is_stopped(p))
continue;
retval = 1;
break;
} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
return retval;
}
/*
* Check to see if any process groups have become orphaned as
* a result of our exiting, and if they have any stopped jobs,
* send them a SIGHUP and then a SIGCONT. (POSIX 3.2.2.2)
*/
static void
kill_orphaned_pgrp(struct task_struct *tsk, struct task_struct *parent)
{
struct pid *pgrp = task_pgrp(tsk);
struct task_struct *ignored_task = tsk;
if (!parent)
/* exit: our father is in a different pgrp than
* we are and we were the only connection outside.
*/
parent = tsk->real_parent;
else
/* reparent: our child is in a different pgrp than
* we are, and it was the only connection outside.
*/
ignored_task = NULL;
if (task_pgrp(parent) != pgrp &&
task_session(parent) == task_session(tsk) &&
will_become_orphaned_pgrp(pgrp, ignored_task) &&
has_stopped_jobs(pgrp)) {
__kill_pgrp_info(SIGHUP, SEND_SIG_PRIV, pgrp);
__kill_pgrp_info(SIGCONT, SEND_SIG_PRIV, pgrp);
}
}
/**
* reparent_to_kthreadd - Reparent the calling kernel thread to kthreadd
*
* If a kernel thread is launched as a result of a system call, or if
* it ever exits, it should generally reparent itself to kthreadd so it
* isn't in the way of other processes and is correctly cleaned up on exit.
*
* The various task state such as scheduling policy and priority may have
* been inherited from a user process, so we reset them to sane values here.
*
* NOTE that reparent_to_kthreadd() gives the caller full capabilities.
*/
static void reparent_to_kthreadd(void)
{
write_lock_irq(&tasklist_lock);
ptrace_unlink(current);
/* Reparent to init */
current->real_parent = current->parent = kthreadd_task;
list_move_tail(&current->sibling, &current->real_parent->children);
/* Set the exit signal to SIGCHLD so we signal init on exit */
current->exit_signal = SIGCHLD;
if (task_nice(current) < 0)
set_user_nice(current, 0);
/* cpus_allowed? */
/* rt_priority? */
/* signals? */
memcpy(current->signal->rlim, init_task.signal->rlim,
sizeof(current->signal->rlim));
atomic_inc(&init_cred.usage);
commit_creds(&init_cred);
write_unlock_irq(&tasklist_lock);
}
void __set_special_pids(struct pid *pid)
{
struct task_struct *curr = current->group_leader;
pid_t nr = pid_nr(pid);
if (task_session(curr) != pid) {
change_pid(curr, PIDTYPE_SID, pid);
set_task_session(curr, nr);
}
if (task_pgrp(curr) != pid) {
change_pid(curr, PIDTYPE_PGID, pid);
set_task_pgrp(curr, nr);
}
}
static void set_special_pids(struct pid *pid)
{
write_lock_irq(&tasklist_lock);
__set_special_pids(pid);
write_unlock_irq(&tasklist_lock);
}
/*
* Let kernel threads use this to say that they
* allow a certain signal (since daemonize() will
* have disabled all of them by default).
*/
int allow_signal(int sig)
{
if (!valid_signal(sig) || sig < 1)
return -EINVAL;
spin_lock_irq(&current->sighand->siglock);
sigdelset(&current->blocked, sig);
if (!current->mm) {
/* Kernel threads handle their own signals.
Let the signal code know it'll be handled, so
that they don't get converted to SIGKILL or
just silently dropped */
current->sighand->action[(sig)-1].sa.sa_handler = (void __user *)2;
}
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
return 0;
}
EXPORT_SYMBOL(allow_signal);
int disallow_signal(int sig)
{
if (!valid_signal(sig) || sig < 1)
return -EINVAL;
spin_lock_irq(&current->sighand->siglock);
current->sighand->action[(sig)-1].sa.sa_handler = SIG_IGN;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
return 0;
}
EXPORT_SYMBOL(disallow_signal);
/*
* Put all the gunge required to become a kernel thread without
* attached user resources in one place where it belongs.
*/
void daemonize(const char *name, ...)
{
va_list args;
struct fs_struct *fs;
sigset_t blocked;
va_start(args, name);
vsnprintf(current->comm, sizeof(current->comm), name, args);
va_end(args);
/*
* If we were started as result of loading a module, close all of the
* user space pages. We don't need them, and if we didn't close them
* they would be locked into memory.
*/
exit_mm(current);
/*
* We don't want to have TIF_FREEZE set if the system-wide hibernation
* or suspend transition begins right now.
*/
current->flags |= (PF_NOFREEZE | PF_KTHREAD);
if (current->nsproxy != &init_nsproxy) {
get_nsproxy(&init_nsproxy);
switch_task_namespaces(current, &init_nsproxy);
}
set_special_pids(&init_struct_pid);
proc_clear_tty(current);
/* Block and flush all signals */
sigfillset(&blocked);
sigprocmask(SIG_BLOCK, &blocked, NULL);
flush_signals(current);
/* Become as one with the init task */
exit_fs(current); /* current->fs->count--; */
fs = init_task.fs;
current->fs = fs;
atomic_inc(&fs->count);
exit_files(current);
current->files = init_task.files;
atomic_inc(&current->files->count);
reparent_to_kthreadd();
}
EXPORT_SYMBOL(daemonize);
static void close_files(struct files_struct * files)
{
int i, j;
struct fdtable *fdt;
j = 0;
/*
* It is safe to dereference the fd table without RCU or
* ->file_lock because this is the last reference to the
* files structure.
*/
fdt = files_fdtable(files);
for (;;) {
unsigned long set;
i = j * __NFDBITS;
if (i >= fdt->max_fds)
break;
set = fdt->open_fds->fds_bits[j++];
while (set) {
if (set & 1) {
struct file * file = xchg(&fdt->fd[i], NULL);
if (file) {
filp_close(file, files);
cond_resched();
}
}
i++;
set >>= 1;
}
}
}
struct files_struct *get_files_struct(struct task_struct *task)
{
struct files_struct *files;
task_lock(task);
files = task->files;
if (files)
atomic_inc(&files->count);
task_unlock(task);
return files;
}
void put_files_struct(struct files_struct *files)
{
struct fdtable *fdt;
if (atomic_dec_and_test(&files->count)) {
close_files(files);
/*
* Free the fd and fdset arrays if we expanded them.
* If the fdtable was embedded, pass files for freeing
* at the end of the RCU grace period. Otherwise,
* you can free files immediately.
*/
fdt = files_fdtable(files);
if (fdt != &files->fdtab)
kmem_cache_free(files_cachep, files);
free_fdtable(fdt);
}
}
void reset_files_struct(struct files_struct *files)
{
struct task_struct *tsk = current;
struct files_struct *old;
old = tsk->files;
task_lock(tsk);
tsk->files = files;
task_unlock(tsk);
put_files_struct(old);
}
void exit_files(struct task_struct *tsk)
{
struct files_struct * files = tsk->files;
if (files) {
task_lock(tsk);
tsk->files = NULL;
task_unlock(tsk);
put_files_struct(files);
}
}
void put_fs_struct(struct fs_struct *fs)
{
/* No need to hold fs->lock if we are killing it */
if (atomic_dec_and_test(&fs->count)) {
path_put(&fs->root);
path_put(&fs->pwd);
kmem_cache_free(fs_cachep, fs);
}
}
void exit_fs(struct task_struct *tsk)
{
struct fs_struct * fs = tsk->fs;
if (fs) {
task_lock(tsk);
tsk->fs = NULL;
task_unlock(tsk);
put_fs_struct(fs);
}
}
EXPORT_SYMBOL_GPL(exit_fs);
#ifdef CONFIG_MM_OWNER
/*
* Task p is exiting and it owned mm, lets find a new owner for it
*/
static inline int
mm_need_new_owner(struct mm_struct *mm, struct task_struct *p)
{
/*
* If there are other users of the mm and the owner (us) is exiting
* we need to find a new owner to take on the responsibility.
*/
if (atomic_read(&mm->mm_users) <= 1)
return 0;
if (mm->owner != p)
return 0;
return 1;
}
void mm_update_next_owner(struct mm_struct *mm)
{
struct task_struct *c, *g, *p = current;
retry:
if (!mm_need_new_owner(mm, p))
return;
read_lock(&tasklist_lock);
/*
* Search in the children
*/
list_for_each_entry(c, &p->children, sibling) {
if (c->mm == mm)
goto assign_new_owner;
}
/*
* Search in the siblings
*/
list_for_each_entry(c, &p->parent->children, sibling) {
if (c->mm == mm)
goto assign_new_owner;
}
/*
* Search through everything else. We should not get
* here often
*/
do_each_thread(g, c) {
if (c->mm == mm)
goto assign_new_owner;
} while_each_thread(g, c);
read_unlock(&tasklist_lock);
/*
* We found no owner yet mm_users > 1: this implies that we are
* most likely racing with swapoff (try_to_unuse()) or /proc or
* ptrace or page migration (get_task_mm()). Mark owner as NULL,
* so that subsystems can understand the callback and take action.
*/
down_write(&mm->mmap_sem);
cgroup_mm_owner_callbacks(mm->owner, NULL);
mm->owner = NULL;
up_write(&mm->mmap_sem);
return;
assign_new_owner:
BUG_ON(c == p);
get_task_struct(c);
read_unlock(&tasklist_lock);
down_write(&mm->mmap_sem);
/*
* The task_lock protects c->mm from changing.
* We always want mm->owner->mm == mm
*/
task_lock(c);
if (c->mm != mm) {
task_unlock(c);
up_write(&mm->mmap_sem);
put_task_struct(c);
goto retry;
}
cgroup_mm_owner_callbacks(mm->owner, c);
mm->owner = c;
task_unlock(c);
up_write(&mm->mmap_sem);
put_task_struct(c);
}
#endif /* CONFIG_MM_OWNER */
/*
* Turn us into a lazy TLB process if we
* aren't already..
*/
static void exit_mm(struct task_struct * tsk)
{
struct mm_struct *mm = tsk->mm;
struct core_state *core_state;
mm_release(tsk, mm);
if (!mm)
return;
/*
* Serialize with any possible pending coredump.
* We must hold mmap_sem around checking core_state
* and clearing tsk->mm. The core-inducing thread
* will increment ->nr_threads for each thread in the
* group with ->mm != NULL.
*/
down_read(&mm->mmap_sem);
core_state = mm->core_state;
if (core_state) {
struct core_thread self;
up_read(&mm->mmap_sem);
self.task = tsk;
self.next = xchg(&core_state->dumper.next, &self);
/*
* Implies mb(), the result of xchg() must be visible
* to core_state->dumper.
*/
if (atomic_dec_and_test(&core_state->nr_threads))
complete(&core_state->startup);
for (;;) {
set_task_state(tsk, TASK_UNINTERRUPTIBLE);
if (!self.task) /* see coredump_finish() */
break;
schedule();
}
__set_task_state(tsk, TASK_RUNNING);
down_read(&mm->mmap_sem);
}
atomic_inc(&mm->mm_count);
BUG_ON(mm != tsk->active_mm);
/* more a memory barrier than a real lock */
task_lock(tsk);
tsk->mm = NULL;
up_read(&mm->mmap_sem);
enter_lazy_tlb(mm, current);
/* We don't want this task to be frozen prematurely */
clear_freeze_flag(tsk);
task_unlock(tsk);
mm_update_next_owner(mm);
mmput(mm);
}
/*
* Return nonzero if @parent's children should reap themselves.
*
* Called with write_lock_irq(&tasklist_lock) held.
*/
static int ignoring_children(struct task_struct *parent)
{
int ret;
struct sighand_struct *psig = parent->sighand;
unsigned long flags;
spin_lock_irqsave(&psig->siglock, flags);
ret = (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN ||
(psig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDWAIT));
spin_unlock_irqrestore(&psig->siglock, flags);
return ret;
}
/*
* Detach all tasks we were using ptrace on.
* Any that need to be release_task'd are put on the @dead list.
*
* Called with write_lock(&tasklist_lock) held.
*/
static void ptrace_exit(struct task_struct *parent, struct list_head *dead)
{
struct task_struct *p, *n;
int ign = -1;
list_for_each_entry_safe(p, n, &parent->ptraced, ptrace_entry) {
__ptrace_unlink(p);
if (p->exit_state != EXIT_ZOMBIE)
continue;
/*
* If it's a zombie, our attachedness prevented normal
* parent notification or self-reaping. Do notification
* now if it would have happened earlier. If it should
* reap itself, add it to the @dead list. We can't call
* release_task() here because we already hold tasklist_lock.
*
* If it's our own child, there is no notification to do.
* But if our normal children self-reap, then this child
* was prevented by ptrace and we must reap it now.
*/
if (!task_detached(p) && thread_group_empty(p)) {
if (!same_thread_group(p->real_parent, parent))
do_notify_parent(p, p->exit_signal);
else {
if (ign < 0)
ign = ignoring_children(parent);
if (ign)
p->exit_signal = -1;
}
}
if (task_detached(p)) {
/*
* Mark it as in the process of being reaped.
*/
p->exit_state = EXIT_DEAD;
list_add(&p->ptrace_entry, dead);
}
}
}
/*
* Finish up exit-time ptrace cleanup.
*
* Called without locks.
*/
static void ptrace_exit_finish(struct task_struct *parent,
struct list_head *dead)
{
struct task_struct *p, *n;
BUG_ON(!list_empty(&parent->ptraced));
list_for_each_entry_safe(p, n, dead, ptrace_entry) {
list_del_init(&p->ptrace_entry);
release_task(p);
}
}
static void reparent_thread(struct task_struct *p, struct task_struct *father)
{
if (p->pdeath_signal)
/* We already hold the tasklist_lock here. */
group_send_sig_info(p->pdeath_signal, SEND_SIG_NOINFO, p);
list_move_tail(&p->sibling, &p->real_parent->children);
/* If this is a threaded reparent there is no need to
* notify anyone anything has happened.
*/
if (same_thread_group(p->real_parent, father))
return;
/* We don't want people slaying init. */
if (!task_detached(p))
p->exit_signal = SIGCHLD;
/* If we'd notified the old parent about this child's death,
* also notify the new parent.
*/
if (!ptrace_reparented(p) &&
p->exit_state == EXIT_ZOMBIE &&
!task_detached(p) && thread_group_empty(p))
do_notify_parent(p, p->exit_signal);
kill_orphaned_pgrp(p, father);
}
/*
* When we die, we re-parent all our children.
* Try to give them to another thread in our thread
* group, and if no such member exists, give it to
* the child reaper process (ie "init") in our pid
* space.
*/
static struct task_struct *find_new_reaper(struct task_struct *father)
{
struct pid_namespace *pid_ns = task_active_pid_ns(father);
struct task_struct *thread;
thread = father;
while_each_thread(father, thread) {
if (thread->flags & PF_EXITING)
continue;
if (unlikely(pid_ns->child_reaper == father))
pid_ns->child_reaper = thread;
return thread;
}
if (unlikely(pid_ns->child_reaper == father)) {
write_unlock_irq(&tasklist_lock);
if (unlikely(pid_ns == &init_pid_ns))
panic("Attempted to kill init!");
zap_pid_ns_processes(pid_ns);
write_lock_irq(&tasklist_lock);
/*
* We can not clear ->child_reaper or leave it alone.
* There may by stealth EXIT_DEAD tasks on ->children,
* forget_original_parent() must move them somewhere.
*/
pid_ns->child_reaper = init_pid_ns.child_reaper;
}
return pid_ns->child_reaper;
}
static void forget_original_parent(struct task_struct *father)
{
struct task_struct *p, *n, *reaper;
LIST_HEAD(ptrace_dead);
write_lock_irq(&tasklist_lock);
reaper = find_new_reaper(father);
/*
* First clean up ptrace if we were using it.
*/
ptrace_exit(father, &ptrace_dead);
list_for_each_entry_safe(p, n, &father->children, sibling) {
p->real_parent = reaper;
if (p->parent == father) {
BUG_ON(p->ptrace);
p->parent = p->real_parent;
}
reparent_thread(p, father);
}
write_unlock_irq(&tasklist_lock);
BUG_ON(!list_empty(&father->children));
ptrace_exit_finish(father, &ptrace_dead);
}
/*
* Send signals to all our closest relatives so that they know
* to properly mourn us..
*/
static void exit_notify(struct task_struct *tsk, int group_dead)
{
int signal;
void *cookie;
/*
* This does two things:
*
* A. Make init inherit all the child processes
* B. Check to see if any process groups have become orphaned
* as a result of our exiting, and if they have any stopped
* jobs, send them a SIGHUP and then a SIGCONT. (POSIX 3.2.2.2)
*/
forget_original_parent(tsk);
exit_task_namespaces(tsk);
write_lock_irq(&tasklist_lock);
if (group_dead)
kill_orphaned_pgrp(tsk->group_leader, NULL);
/* Let father know we died
*
* Thread signals are configurable, but you aren't going to use
* that to send signals to arbitary processes.
* That stops right now.
*
* If the parent exec id doesn't match the exec id we saved
* when we started then we know the parent has changed security
* domain.
*
* If our self_exec id doesn't match our parent_exec_id then
* we have changed execution domain as these two values started
* the same after a fork.
*/
if (tsk->exit_signal != SIGCHLD && !task_detached(tsk) &&
(tsk->parent_exec_id != tsk->real_parent->self_exec_id ||
tsk->self_exec_id != tsk->parent_exec_id) &&
!capable(CAP_KILL))
tsk->exit_signal = SIGCHLD;
signal = tracehook_notify_death(tsk, &cookie, group_dead);
if (signal >= 0)
signal = do_notify_parent(tsk, signal);
tsk->exit_state = signal == DEATH_REAP ? EXIT_DEAD : EXIT_ZOMBIE;
/* mt-exec, de_thread() is waiting for us */
if (thread_group_leader(tsk) &&
tsk->signal->group_exit_task &&
tsk->signal->notify_count < 0)
wake_up_process(tsk->signal->group_exit_task);
write_unlock_irq(&tasklist_lock);
tracehook_report_death(tsk, signal, cookie, group_dead);
/* If the process is dead, release it - nobody will wait for it */
if (signal == DEATH_REAP)
release_task(tsk);
}
#ifdef CONFIG_DEBUG_STACK_USAGE
static void check_stack_usage(void)
{
static DEFINE_SPINLOCK(low_water_lock);
static int lowest_to_date = THREAD_SIZE;
unsigned long *n = end_of_stack(current);
unsigned long free;
while (*n == 0)
n++;
free = (unsigned long)n - (unsigned long)end_of_stack(current);
if (free >= lowest_to_date)
return;
spin_lock(&low_water_lock);
if (free < lowest_to_date) {
printk(KERN_WARNING "%s used greatest stack depth: %lu bytes "
"left\n",
current->comm, free);
lowest_to_date = free;
}
spin_unlock(&low_water_lock);
}
#else
static inline void check_stack_usage(void) {}
#endif
NORET_TYPE void do_exit(long code)
{
struct task_struct *tsk = current;
int group_dead;
profile_task_exit(tsk);
WARN_ON(atomic_read(&tsk->fs_excl));
if (unlikely(in_interrupt()))
panic("Aiee, killing interrupt handler!");
if (unlikely(!tsk->pid))
panic("Attempted to kill the idle task!");
tracehook_report_exit(&code);
/*
* We're taking recursive faults here in do_exit. Safest is to just
* leave this task alone and wait for reboot.
*/
if (unlikely(tsk->flags & PF_EXITING)) {
printk(KERN_ALERT
"Fixing recursive fault but reboot is needed!\n");
/*
* We can do this unlocked here. The futex code uses
* this flag just to verify whether the pi state
* cleanup has been done or not. In the worst case it
* loops once more. We pretend that the cleanup was
* done as there is no way to return. Either the
* OWNER_DIED bit is set by now or we push the blocked
* task into the wait for ever nirwana as well.
*/
tsk->flags |= PF_EXITPIDONE;
if (tsk->io_context)
exit_io_context();
set_current_state(TASK_UNINTERRUPTIBLE);
schedule();
}
exit_signals(tsk); /* sets PF_EXITING */
/*
* tsk->flags are checked in the futex code to protect against
* an exiting task cleaning up the robust pi futexes.
*/
smp_mb();
spin_unlock_wait(&tsk->pi_lock);
if (unlikely(in_atomic()))
printk(KERN_INFO "note: %s[%d] exited with preempt_count %d\n",
current->comm, task_pid_nr(current),
preempt_count());
acct_update_integrals(tsk);
if (tsk->mm) {
update_hiwater_rss(tsk->mm);
update_hiwater_vm(tsk->mm);
}
group_dead = atomic_dec_and_test(&tsk->signal->live);
if (group_dead) {
hrtimer_cancel(&tsk->signal->real_timer);
exit_itimers(tsk->signal);
}
acct_collect(code, group_dead);
#ifdef CONFIG_FUTEX
if (unlikely(tsk->robust_list))
exit_robust_list(tsk);
#ifdef CONFIG_COMPAT
if (unlikely(tsk->compat_robust_list))
compat_exit_robust_list(tsk);
#endif
#endif
if (group_dead)
tty_audit_exit();
if (unlikely(tsk->audit_context))
audit_free(tsk);
tsk->exit_code = code;
taskstats_exit(tsk, group_dead);
exit_mm(tsk);
if (group_dead)
acct_process();
trace_sched_process_exit(tsk);
exit_sem(tsk);
exit_files(tsk);
exit_fs(tsk);
check_stack_usage();
exit_thread();
cgroup_exit(tsk, 1);
if (group_dead && tsk->signal->leader)
disassociate_ctty(1);
module_put(task_thread_info(tsk)->exec_domain->module);
if (tsk->binfmt)
module_put(tsk->binfmt->module);
proc_exit_connector(tsk);
exit_notify(tsk, group_dead);
#ifdef CONFIG_NUMA
mpol_put(tsk->mempolicy);
tsk->mempolicy = NULL;
#endif
#ifdef CONFIG_FUTEX
/*
* This must happen late, after the PID is not
* hashed anymore:
*/
if (unlikely(!list_empty(&tsk->pi_state_list)))
exit_pi_state_list(tsk);
if (unlikely(current->pi_state_cache))
kfree(current->pi_state_cache);
#endif
/*
* Make sure we are holding no locks:
*/
debug_check_no_locks_held(tsk);
/*
* We can do this unlocked here. The futex code uses this flag
* just to verify whether the pi state cleanup has been done
* or not. In the worst case it loops once more.
*/
tsk->flags |= PF_EXITPIDONE;
if (tsk->io_context)
exit_io_context();
if (tsk->splice_pipe)
__free_pipe_info(tsk->splice_pipe);
preempt_disable();
/* causes final put_task_struct in finish_task_switch(). */
tsk->state = TASK_DEAD;
schedule();
BUG();
/* Avoid "noreturn function does return". */
for (;;)
cpu_relax(); /* For when BUG is null */
}
EXPORT_SYMBOL_GPL(do_exit);
NORET_TYPE void complete_and_exit(struct completion *comp, long code)
{
if (comp)
complete(comp);
do_exit(code);
}
EXPORT_SYMBOL(complete_and_exit);
asmlinkage long sys_exit(int error_code)
{
do_exit((error_code&0xff)<<8);
}
/*
* Take down every thread in the group. This is called by fatal signals
* as well as by sys_exit_group (below).
*/
NORET_TYPE void
do_group_exit(int exit_code)
{
struct signal_struct *sig = current->signal;
BUG_ON(exit_code & 0x80); /* core dumps don't get here */
if (signal_group_exit(sig))
exit_code = sig->group_exit_code;
else if (!thread_group_empty(current)) {
struct sighand_struct *const sighand = current->sighand;
spin_lock_irq(&sighand->siglock);
if (signal_group_exit(sig))
/* Another thread got here before we took the lock. */
exit_code = sig->group_exit_code;
else {
sig->group_exit_code = exit_code;
sig->flags = SIGNAL_GROUP_EXIT;
zap_other_threads(current);
}
spin_unlock_irq(&sighand->siglock);
}
do_exit(exit_code);
/* NOTREACHED */
}
/*
* this kills every thread in the thread group. Note that any externally
* wait4()-ing process will get the correct exit code - even if this
* thread is not the thread group leader.
*/
asmlinkage void sys_exit_group(int error_code)
{
do_group_exit((error_code & 0xff) << 8);
}
static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
{
struct pid *pid = NULL;
if (type == PIDTYPE_PID)
pid = task->pids[type].pid;
else if (type < PIDTYPE_MAX)
pid = task->group_leader->pids[type].pid;
return pid;
}
static int eligible_child(enum pid_type type, struct pid *pid, int options,
struct task_struct *p)
{
int err;
if (type < PIDTYPE_MAX) {
if (task_pid_type(p, type) != pid)
return 0;
}
/* Wait for all children (clone and not) if __WALL is set;
* otherwise, wait for clone children *only* if __WCLONE is
* set; otherwise, wait for non-clone children *only*. (Note:
* A "clone" child here is one that reports to its parent
* using a signal other than SIGCHLD.) */
if (((p->exit_signal != SIGCHLD) ^ ((options & __WCLONE) != 0))
&& !(options & __WALL))
return 0;
err = security_task_wait(p);
if (err)
return err;
return 1;
}
static int wait_noreap_copyout(struct task_struct *p, pid_t pid, uid_t uid,
int why, int status,
struct siginfo __user *infop,
struct rusage __user *rusagep)
{
int retval = rusagep ? getrusage(p, RUSAGE_BOTH, rusagep) : 0;
put_task_struct(p);
if (!retval)
retval = put_user(SIGCHLD, &infop->si_signo);
if (!retval)
retval = put_user(0, &infop->si_errno);
if (!retval)
retval = put_user((short)why, &infop->si_code);
if (!retval)
retval = put_user(pid, &infop->si_pid);
if (!retval)
retval = put_user(uid, &infop->si_uid);
if (!retval)
retval = put_user(status, &infop->si_status);
if (!retval)
retval = pid;
return retval;
}
/*
* Handle sys_wait4 work for one task in state EXIT_ZOMBIE. We hold
* read_lock(&tasklist_lock) on entry. If we return zero, we still hold
* the lock and this task is uninteresting. If we return nonzero, we have
* released the lock and the system call should return.
*/
static int wait_task_zombie(struct task_struct *p, int options,
struct siginfo __user *infop,
int __user *stat_addr, struct rusage __user *ru)
{
unsigned long state;
int retval, status, traced;
pid_t pid = task_pid_vnr(p);
uid_t uid = __task_cred(p)->uid;
if (!likely(options & WEXITED))
return 0;
if (unlikely(options & WNOWAIT)) {
int exit_code = p->exit_code;
int why, status;
get_task_struct(p);
read_unlock(&tasklist_lock);
if ((exit_code & 0x7f) == 0) {
why = CLD_EXITED;
status = exit_code >> 8;
} else {
why = (exit_code & 0x80) ? CLD_DUMPED : CLD_KILLED;
status = exit_code & 0x7f;
}
return wait_noreap_copyout(p, pid, uid, why,
status, infop, ru);
}
/*
* Try to move the task's state to DEAD
* only one thread is allowed to do this:
*/
state = xchg(&p->exit_state, EXIT_DEAD);
if (state != EXIT_ZOMBIE) {
BUG_ON(state != EXIT_DEAD);
return 0;
}
traced = ptrace_reparented(p);
if (likely(!traced)) {
struct signal_struct *psig;
struct signal_struct *sig;
struct task_cputime cputime;
/*
* The resource counters for the group leader are in its
* own task_struct. Those for dead threads in the group
* are in its signal_struct, as are those for the child
* processes it has previously reaped. All these
* accumulate in the parent's signal_struct c* fields.
*
* We don't bother to take a lock here to protect these
* p->signal fields, because they are only touched by
* __exit_signal, which runs with tasklist_lock
* write-locked anyway, and so is excluded here. We do
* need to protect the access to p->parent->signal fields,
* as other threads in the parent group can be right
* here reaping other children at the same time.
*
* We use thread_group_cputime() to get times for the thread
* group, which consolidates times for all threads in the
* group including the group leader.
*/
spin_lock_irq(&p->parent->sighand->siglock);
psig = p->parent->signal;
sig = p->signal;
thread_group_cputime(p, &cputime);
psig->cutime =
cputime_add(psig->cutime,
cputime_add(cputime.utime,
sig->cutime));
psig->cstime =
cputime_add(psig->cstime,
cputime_add(cputime.stime,
sig->cstime));
psig->cgtime =
cputime_add(psig->cgtime,
cputime_add(p->gtime,
cputime_add(sig->gtime,
sig->cgtime)));
psig->cmin_flt +=
p->min_flt + sig->min_flt + sig->cmin_flt;
psig->cmaj_flt +=
p->maj_flt + sig->maj_flt + sig->cmaj_flt;
psig->cnvcsw +=
p->nvcsw + sig->nvcsw + sig->cnvcsw;
psig->cnivcsw +=
p->nivcsw + sig->nivcsw + sig->cnivcsw;
psig->cinblock +=
task_io_get_inblock(p) +
sig->inblock + sig->cinblock;
psig->coublock +=
task_io_get_oublock(p) +
sig->oublock + sig->coublock;
task_io_accounting_add(&psig->ioac, &p->ioac);
task_io_accounting_add(&psig->ioac, &sig->ioac);
spin_unlock_irq(&p->parent->sighand->siglock);
}
/*
* Now we are sure this task is interesting, and no other
* thread can reap it because we set its state to EXIT_DEAD.
*/
read_unlock(&tasklist_lock);
retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
status = (p->signal->flags & SIGNAL_GROUP_EXIT)
? p->signal->group_exit_code : p->exit_code;
if (!retval && stat_addr)
retval = put_user(status, stat_addr);
if (!retval && infop)
retval = put_user(SIGCHLD, &infop->si_signo);
if (!retval && infop)
retval = put_user(0, &infop->si_errno);
if (!retval && infop) {
int why;
if ((status & 0x7f) == 0) {
why = CLD_EXITED;
status >>= 8;
} else {
why = (status & 0x80) ? CLD_DUMPED : CLD_KILLED;
status &= 0x7f;
}
retval = put_user((short)why, &infop->si_code);
if (!retval)
retval = put_user(status, &infop->si_status);
}
if (!retval && infop)
retval = put_user(pid, &infop->si_pid);
if (!retval && infop)
retval = put_user(uid, &infop->si_uid);
if (!retval)
retval = pid;
if (traced) {
write_lock_irq(&tasklist_lock);
/* We dropped tasklist, ptracer could die and untrace */
ptrace_unlink(p);
/*
* If this is not a detached task, notify the parent.
* If it's still not detached after that, don't release
* it now.
*/
if (!task_detached(p)) {
do_notify_parent(p, p->exit_signal);
if (!task_detached(p)) {
p->exit_state = EXIT_ZOMBIE;
p = NULL;
}
}
write_unlock_irq(&tasklist_lock);
}
if (p != NULL)
release_task(p);
return retval;
}
/*
* Handle sys_wait4 work for one task in state TASK_STOPPED. We hold
* read_lock(&tasklist_lock) on entry. If we return zero, we still hold
* the lock and this task is uninteresting. If we return nonzero, we have
* released the lock and the system call should return.
*/
static int wait_task_stopped(int ptrace, struct task_struct *p,
int options, struct siginfo __user *infop,
int __user *stat_addr, struct rusage __user *ru)
{
int retval, exit_code, why;
uid_t uid = 0; /* unneeded, required by compiler */
pid_t pid;
if (!(options & WUNTRACED))
return 0;
exit_code = 0;
spin_lock_irq(&p->sighand->siglock);
if (unlikely(!task_is_stopped_or_traced(p)))
goto unlock_sig;
if (!ptrace && p->signal->group_stop_count > 0)
/*
* A group stop is in progress and this is the group leader.
* We won't report until all threads have stopped.
*/
goto unlock_sig;
exit_code = p->exit_code;
if (!exit_code)
goto unlock_sig;
if (!unlikely(options & WNOWAIT))
p->exit_code = 0;
/* don't need the RCU readlock here as we're holding a spinlock */
uid = __task_cred(p)->uid;
unlock_sig:
spin_unlock_irq(&p->sighand->siglock);
if (!exit_code)
return 0;
/*
* Now we are pretty sure this task is interesting.
* Make sure it doesn't get reaped out from under us while we
* give up the lock and then examine it below. We don't want to
* keep holding onto the tasklist_lock while we call getrusage and
* possibly take page faults for user memory.
*/
get_task_struct(p);
pid = task_pid_vnr(p);
why = ptrace ? CLD_TRAPPED : CLD_STOPPED;
read_unlock(&tasklist_lock);
if (unlikely(options & WNOWAIT))
return wait_noreap_copyout(p, pid, uid,
why, exit_code,
infop, ru);
retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
if (!retval && stat_addr)
retval = put_user((exit_code << 8) | 0x7f, stat_addr);
if (!retval && infop)
retval = put_user(SIGCHLD, &infop->si_signo);
if (!retval && infop)
retval = put_user(0, &infop->si_errno);
if (!retval && infop)
retval = put_user((short)why, &infop->si_code);
if (!retval && infop)
retval = put_user(exit_code, &infop->si_status);
if (!retval && infop)
retval = put_user(pid, &infop->si_pid);
if (!retval && infop)
retval = put_user(uid, &infop->si_uid);
if (!retval)
retval = pid;
put_task_struct(p);
BUG_ON(!retval);
return retval;
}
/*
* Handle do_wait work for one task in a live, non-stopped state.
* read_lock(&tasklist_lock) on entry. If we return zero, we still hold
* the lock and this task is uninteresting. If we return nonzero, we have
* released the lock and the system call should return.
*/
static int wait_task_continued(struct task_struct *p, int options,
struct siginfo __user *infop,
int __user *stat_addr, struct rusage __user *ru)
{
int retval;
pid_t pid;
uid_t uid;
if (!unlikely(options & WCONTINUED))
return 0;
if (!(p->signal->flags & SIGNAL_STOP_CONTINUED))
return 0;
spin_lock_irq(&p->sighand->siglock);
/* Re-check with the lock held. */
if (!(p->signal->flags & SIGNAL_STOP_CONTINUED)) {
spin_unlock_irq(&p->sighand->siglock);
return 0;
}
if (!unlikely(options & WNOWAIT))
p->signal->flags &= ~SIGNAL_STOP_CONTINUED;
uid = __task_cred(p)->uid;
spin_unlock_irq(&p->sighand->siglock);
pid = task_pid_vnr(p);
get_task_struct(p);
read_unlock(&tasklist_lock);
if (!infop) {
retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
put_task_struct(p);
if (!retval && stat_addr)
retval = put_user(0xffff, stat_addr);
if (!retval)
retval = pid;
} else {
retval = wait_noreap_copyout(p, pid, uid,
CLD_CONTINUED, SIGCONT,
infop, ru);
BUG_ON(retval == 0);
}
return retval;
}
/*
* Consider @p for a wait by @parent.
*
* -ECHILD should be in *@notask_error before the first call.
* Returns nonzero for a final return, when we have unlocked tasklist_lock.
* Returns zero if the search for a child should continue;
* then *@notask_error is 0 if @p is an eligible child,
* or another error from security_task_wait(), or still -ECHILD.
*/
static int wait_consider_task(struct task_struct *parent, int ptrace,
struct task_struct *p, int *notask_error,
enum pid_type type, struct pid *pid, int options,
struct siginfo __user *infop,
int __user *stat_addr, struct rusage __user *ru)
{
int ret = eligible_child(type, pid, options, p);
if (!ret)
return ret;
if (unlikely(ret < 0)) {
/*
* If we have not yet seen any eligible child,
* then let this error code replace -ECHILD.
* A permission error will give the user a clue
* to look for security policy problems, rather
* than for mysterious wait bugs.
*/
if (*notask_error)
*notask_error = ret;
}
if (likely(!ptrace) && unlikely(p->ptrace)) {
/*
* This child is hidden by ptrace.
* We aren't allowed to see it now, but eventually we will.
*/
*notask_error = 0;
return 0;
}
if (p->exit_state == EXIT_DEAD)
return 0;
/*
* We don't reap group leaders with subthreads.
*/
if (p->exit_state == EXIT_ZOMBIE && !delay_group_leader(p))
return wait_task_zombie(p, options, infop, stat_addr, ru);
/*
* It's stopped or running now, so it might
* later continue, exit, or stop again.
*/
*notask_error = 0;
if (task_is_stopped_or_traced(p))
return wait_task_stopped(ptrace, p, options,
infop, stat_addr, ru);
return wait_task_continued(p, options, infop, stat_addr, ru);
}
/*
* Do the work of do_wait() for one thread in the group, @tsk.
*
* -ECHILD should be in *@notask_error before the first call.
* Returns nonzero for a final return, when we have unlocked tasklist_lock.
* Returns zero if the search for a child should continue; then
* *@notask_error is 0 if there were any eligible children,
* or another error from security_task_wait(), or still -ECHILD.
*/
static int do_wait_thread(struct task_struct *tsk, int *notask_error,
enum pid_type type, struct pid *pid, int options,
struct siginfo __user *infop, int __user *stat_addr,
struct rusage __user *ru)
{
struct task_struct *p;
list_for_each_entry(p, &tsk->children, sibling) {
/*
* Do not consider detached threads.
*/
if (!task_detached(p)) {
int ret = wait_consider_task(tsk, 0, p, notask_error,
type, pid, options,
infop, stat_addr, ru);
if (ret)
return ret;
}
}
return 0;
}
static int ptrace_do_wait(struct task_struct *tsk, int *notask_error,
enum pid_type type, struct pid *pid, int options,
struct siginfo __user *infop, int __user *stat_addr,
struct rusage __user *ru)
{
struct task_struct *p;
/*
* Traditionally we see ptrace'd stopped tasks regardless of options.
*/
options |= WUNTRACED;
list_for_each_entry(p, &tsk->ptraced, ptrace_entry) {
int ret = wait_consider_task(tsk, 1, p, notask_error,
type, pid, options,
infop, stat_addr, ru);
if (ret)
return ret;
}
return 0;
}
static long do_wait(enum pid_type type, struct pid *pid, int options,
struct siginfo __user *infop, int __user *stat_addr,
struct rusage __user *ru)
{
DECLARE_WAITQUEUE(wait, current);
struct task_struct *tsk;
int retval;
trace_sched_process_wait(pid);
add_wait_queue(&current->signal->wait_chldexit,&wait);
repeat:
/*
* If there is nothing that can match our critiera just get out.
* We will clear @retval to zero if we see any child that might later
* match our criteria, even if we are not able to reap it yet.
*/
retval = -ECHILD;
if ((type < PIDTYPE_MAX) && (!pid || hlist_empty(&pid->tasks[type])))
goto end;
current->state = TASK_INTERRUPTIBLE;
read_lock(&tasklist_lock);
tsk = current;
do {
int tsk_result = do_wait_thread(tsk, &retval,
type, pid, options,
infop, stat_addr, ru);
if (!tsk_result)
tsk_result = ptrace_do_wait(tsk, &retval,
type, pid, options,
infop, stat_addr, ru);
if (tsk_result) {
/*
* tasklist_lock is unlocked and we have a final result.
*/
retval = tsk_result;
goto end;
}
if (options & __WNOTHREAD)
break;
tsk = next_thread(tsk);
BUG_ON(tsk->signal != current->signal);
} while (tsk != current);
read_unlock(&tasklist_lock);
if (!retval && !(options & WNOHANG)) {
retval = -ERESTARTSYS;
if (!signal_pending(current)) {
schedule();
goto repeat;
}
}
end:
current->state = TASK_RUNNING;
remove_wait_queue(&current->signal->wait_chldexit,&wait);
if (infop) {
if (retval > 0)
retval = 0;
else {
/*
* For a WNOHANG return, clear out all the fields
* we would set so the user can easily tell the
* difference.
*/
if (!retval)
retval = put_user(0, &infop->si_signo);
if (!retval)
retval = put_user(0, &infop->si_errno);
if (!retval)
retval = put_user(0, &infop->si_code);
if (!retval)
retval = put_user(0, &infop->si_pid);
if (!retval)
retval = put_user(0, &infop->si_uid);
if (!retval)
retval = put_user(0, &infop->si_status);
}
}
return retval;
}
asmlinkage long sys_waitid(int which, pid_t upid,
struct siginfo __user *infop, int options,
struct rusage __user *ru)
{
struct pid *pid = NULL;
enum pid_type type;
long ret;
if (options & ~(WNOHANG|WNOWAIT|WEXITED|WSTOPPED|WCONTINUED))
return -EINVAL;
if (!(options & (WEXITED|WSTOPPED|WCONTINUED)))
return -EINVAL;
switch (which) {
case P_ALL:
type = PIDTYPE_MAX;
break;
case P_PID:
type = PIDTYPE_PID;
if (upid <= 0)
return -EINVAL;
break;
case P_PGID:
type = PIDTYPE_PGID;
if (upid <= 0)
return -EINVAL;
break;
default:
return -EINVAL;
}
if (type < PIDTYPE_MAX)
pid = find_get_pid(upid);
ret = do_wait(type, pid, options, infop, NULL, ru);
put_pid(pid);
/* avoid REGPARM breakage on x86: */
asmlinkage_protect(5, ret, which, upid, infop, options, ru);
return ret;
}
asmlinkage long sys_wait4(pid_t upid, int __user *stat_addr,
int options, struct rusage __user *ru)
{
struct pid *pid = NULL;
enum pid_type type;
long ret;
if (options & ~(WNOHANG|WUNTRACED|WCONTINUED|
__WNOTHREAD|__WCLONE|__WALL))
return -EINVAL;
if (upid == -1)
type = PIDTYPE_MAX;
else if (upid < 0) {
type = PIDTYPE_PGID;
pid = find_get_pid(-upid);
} else if (upid == 0) {
type = PIDTYPE_PGID;
pid = get_pid(task_pgrp(current));
} else /* upid > 0 */ {
type = PIDTYPE_PID;
pid = find_get_pid(upid);
}
ret = do_wait(type, pid, options | WEXITED, NULL, stat_addr, ru);
put_pid(pid);
/* avoid REGPARM breakage on x86: */
asmlinkage_protect(4, ret, upid, stat_addr, options, ru);
return ret;
}
#ifdef __ARCH_WANT_SYS_WAITPID
/*
* sys_waitpid() remains for compatibility. waitpid() should be
* implemented by calling sys_wait4() from libc.a.
*/
asmlinkage long sys_waitpid(pid_t pid, int __user *stat_addr, int options)
{
return sys_wait4(pid, stat_addr, options, NULL);
}
#endif