mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 14:05:46 +07:00
8a82b408ac
Add support for MAX77836 chipset and its additional two LDO regulators. These LDO regulators are controlled by the PMIC block with additional regmap (different I2C slave address). The MAX77836 charger and safeout regulators are almost identical to MAX14577. The registers layout is the same, except values for charger's current. The patch adds simple mapping between device type and supported current by the charger regulator. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
477 lines
14 KiB
C
477 lines
14 KiB
C
/*
|
|
* max14577.c - Regulator driver for the Maxim 14577/77836
|
|
*
|
|
* Copyright (C) 2013,2014 Samsung Electronics
|
|
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/mfd/max14577.h>
|
|
#include <linux/mfd/max14577-private.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
/*
|
|
* Valid limits of current for max14577 and max77836 chargers.
|
|
* They must correspond to MBCICHWRCL and MBCICHWRCH fields in CHGCTRL4
|
|
* register for given chipset.
|
|
*/
|
|
struct maxim_charger_current {
|
|
/* Minimal current, set in CHGCTRL4/MBCICHWRCL, uA */
|
|
unsigned int min;
|
|
/*
|
|
* Minimal current when high setting is active,
|
|
* set in CHGCTRL4/MBCICHWRCH, uA
|
|
*/
|
|
unsigned int high_start;
|
|
/* Value of one step in high setting, uA */
|
|
unsigned int high_step;
|
|
/* Maximum current of high setting, uA */
|
|
unsigned int max;
|
|
};
|
|
|
|
/* Table of valid charger currents for different Maxim chipsets */
|
|
static const struct maxim_charger_current maxim_charger_currents[] = {
|
|
[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },
|
|
[MAXIM_DEVICE_TYPE_MAX14577] = {
|
|
.min = MAX14577_REGULATOR_CURRENT_LIMIT_MIN,
|
|
.high_start = MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START,
|
|
.high_step = MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP,
|
|
.max = MAX14577_REGULATOR_CURRENT_LIMIT_MAX,
|
|
},
|
|
[MAXIM_DEVICE_TYPE_MAX77836] = {
|
|
.min = MAX77836_REGULATOR_CURRENT_LIMIT_MIN,
|
|
.high_start = MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START,
|
|
.high_step = MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP,
|
|
.max = MAX77836_REGULATOR_CURRENT_LIMIT_MAX,
|
|
},
|
|
};
|
|
|
|
static int max14577_reg_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
int rid = rdev_get_id(rdev);
|
|
struct regmap *rmap = rdev->regmap;
|
|
u8 reg_data;
|
|
|
|
switch (rid) {
|
|
case MAX14577_CHARGER:
|
|
max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, ®_data);
|
|
if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0)
|
|
return 0;
|
|
max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, ®_data);
|
|
if ((reg_data & STATUS3_CGMBC_MASK) == 0)
|
|
return 0;
|
|
/* MBCHOSTEN and CGMBC are on */
|
|
return 1;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
|
|
{
|
|
u8 reg_data;
|
|
struct regmap *rmap = rdev->regmap;
|
|
struct max14577 *max14577 = rdev_get_drvdata(rdev);
|
|
const struct maxim_charger_current *limits =
|
|
&maxim_charger_currents[max14577->dev_type];
|
|
|
|
if (rdev_get_id(rdev) != MAX14577_CHARGER)
|
|
return -EINVAL;
|
|
|
|
max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL4, ®_data);
|
|
|
|
if ((reg_data & CHGCTRL4_MBCICHWRCL_MASK) == 0)
|
|
return limits->min;
|
|
|
|
reg_data = ((reg_data & CHGCTRL4_MBCICHWRCH_MASK) >>
|
|
CHGCTRL4_MBCICHWRCH_SHIFT);
|
|
return limits->high_start + reg_data * limits->high_step;
|
|
}
|
|
|
|
static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
|
|
int min_uA, int max_uA)
|
|
{
|
|
int i, current_bits = 0xf;
|
|
u8 reg_data;
|
|
struct max14577 *max14577 = rdev_get_drvdata(rdev);
|
|
const struct maxim_charger_current *limits =
|
|
&maxim_charger_currents[max14577->dev_type];
|
|
|
|
if (rdev_get_id(rdev) != MAX14577_CHARGER)
|
|
return -EINVAL;
|
|
|
|
if (min_uA > limits->max || max_uA < limits->min)
|
|
return -EINVAL;
|
|
|
|
if (max_uA < limits->high_start) {
|
|
/*
|
|
* Less than high_start,
|
|
* so set the minimal current (turn only Low Bit off)
|
|
*/
|
|
u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;
|
|
return max14577_update_reg(rdev->regmap,
|
|
MAX14577_CHG_REG_CHG_CTRL4,
|
|
CHGCTRL4_MBCICHWRCL_MASK, reg_data);
|
|
}
|
|
|
|
/*
|
|
* max_uA is in range: <high_start, inifinite>, so search for
|
|
* valid current starting from maximum current.
|
|
*/
|
|
for (i = limits->max; i >= limits->high_start; i -= limits->high_step) {
|
|
if (i <= max_uA)
|
|
break;
|
|
current_bits--;
|
|
}
|
|
BUG_ON(current_bits < 0); /* Cannot happen */
|
|
|
|
/* Turn Low Bit on (use range high_start-max)... */
|
|
reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
|
|
/* and set proper High Bits */
|
|
reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
|
|
|
|
return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
|
|
CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
|
|
reg_data);
|
|
}
|
|
|
|
static struct regulator_ops max14577_safeout_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
};
|
|
|
|
static struct regulator_ops max14577_charger_ops = {
|
|
.is_enabled = max14577_reg_is_enabled,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_current_limit = max14577_reg_get_current_limit,
|
|
.set_current_limit = max14577_reg_set_current_limit,
|
|
};
|
|
|
|
static const struct regulator_desc max14577_supported_regulators[] = {
|
|
[MAX14577_SAFEOUT] = {
|
|
.name = "SAFEOUT",
|
|
.id = MAX14577_SAFEOUT,
|
|
.ops = &max14577_safeout_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
|
|
.enable_reg = MAX14577_REG_CONTROL2,
|
|
.enable_mask = CTRL2_SFOUTORD_MASK,
|
|
},
|
|
[MAX14577_CHARGER] = {
|
|
.name = "CHARGER",
|
|
.id = MAX14577_CHARGER,
|
|
.ops = &max14577_charger_ops,
|
|
.type = REGULATOR_CURRENT,
|
|
.owner = THIS_MODULE,
|
|
.enable_reg = MAX14577_CHG_REG_CHG_CTRL2,
|
|
.enable_mask = CHGCTRL2_MBCHOSTEN_MASK,
|
|
},
|
|
};
|
|
|
|
static struct regulator_ops max77836_ldo_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
/* TODO: add .set_suspend_mode */
|
|
};
|
|
|
|
static const struct regulator_desc max77836_supported_regulators[] = {
|
|
[MAX14577_SAFEOUT] = {
|
|
.name = "SAFEOUT",
|
|
.id = MAX14577_SAFEOUT,
|
|
.ops = &max14577_safeout_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = 1,
|
|
.min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
|
|
.enable_reg = MAX14577_REG_CONTROL2,
|
|
.enable_mask = CTRL2_SFOUTORD_MASK,
|
|
},
|
|
[MAX14577_CHARGER] = {
|
|
.name = "CHARGER",
|
|
.id = MAX14577_CHARGER,
|
|
.ops = &max14577_charger_ops,
|
|
.type = REGULATOR_CURRENT,
|
|
.owner = THIS_MODULE,
|
|
.enable_reg = MAX14577_CHG_REG_CHG_CTRL2,
|
|
.enable_mask = CHGCTRL2_MBCHOSTEN_MASK,
|
|
},
|
|
[MAX77836_LDO1] = {
|
|
.name = "LDO1",
|
|
.id = MAX77836_LDO1,
|
|
.ops = &max77836_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,
|
|
.min_uV = MAX77836_REGULATOR_LDO_VOLTAGE_MIN,
|
|
.uV_step = MAX77836_REGULATOR_LDO_VOLTAGE_STEP,
|
|
.enable_reg = MAX77836_LDO_REG_CNFG1_LDO1,
|
|
.enable_mask = MAX77836_CNFG1_LDO_PWRMD_MASK,
|
|
.vsel_reg = MAX77836_LDO_REG_CNFG1_LDO1,
|
|
.vsel_mask = MAX77836_CNFG1_LDO_TV_MASK,
|
|
},
|
|
[MAX77836_LDO2] = {
|
|
.name = "LDO2",
|
|
.id = MAX77836_LDO2,
|
|
.ops = &max77836_ldo_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.n_voltages = MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM,
|
|
.min_uV = MAX77836_REGULATOR_LDO_VOLTAGE_MIN,
|
|
.uV_step = MAX77836_REGULATOR_LDO_VOLTAGE_STEP,
|
|
.enable_reg = MAX77836_LDO_REG_CNFG1_LDO2,
|
|
.enable_mask = MAX77836_CNFG1_LDO_PWRMD_MASK,
|
|
.vsel_reg = MAX77836_LDO_REG_CNFG1_LDO2,
|
|
.vsel_mask = MAX77836_CNFG1_LDO_TV_MASK,
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct of_regulator_match max14577_regulator_matches[] = {
|
|
{ .name = "SAFEOUT", },
|
|
{ .name = "CHARGER", },
|
|
};
|
|
|
|
static struct of_regulator_match max77836_regulator_matches[] = {
|
|
{ .name = "SAFEOUT", },
|
|
{ .name = "CHARGER", },
|
|
{ .name = "LDO1", },
|
|
{ .name = "LDO2", },
|
|
};
|
|
|
|
static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,
|
|
enum maxim_device_type dev_type)
|
|
{
|
|
int ret;
|
|
struct device_node *np;
|
|
struct of_regulator_match *regulator_matches;
|
|
unsigned int regulator_matches_size;
|
|
|
|
np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "Failed to get child OF node for regulators\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (dev_type) {
|
|
case MAXIM_DEVICE_TYPE_MAX77836:
|
|
regulator_matches = max77836_regulator_matches;
|
|
regulator_matches_size = ARRAY_SIZE(max77836_regulator_matches);
|
|
break;
|
|
case MAXIM_DEVICE_TYPE_MAX14577:
|
|
default:
|
|
regulator_matches = max14577_regulator_matches;
|
|
regulator_matches_size = ARRAY_SIZE(max14577_regulator_matches);
|
|
}
|
|
|
|
ret = of_regulator_match(&pdev->dev, np, regulator_matches,
|
|
regulator_matches_size);
|
|
if (ret < 0)
|
|
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
|
|
else
|
|
ret = 0;
|
|
|
|
of_node_put(np);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline struct regulator_init_data *match_init_data(int index,
|
|
enum maxim_device_type dev_type)
|
|
{
|
|
switch (dev_type) {
|
|
case MAXIM_DEVICE_TYPE_MAX77836:
|
|
return max77836_regulator_matches[index].init_data;
|
|
|
|
case MAXIM_DEVICE_TYPE_MAX14577:
|
|
default:
|
|
return max14577_regulator_matches[index].init_data;
|
|
}
|
|
}
|
|
|
|
static inline struct device_node *match_of_node(int index,
|
|
enum maxim_device_type dev_type)
|
|
{
|
|
switch (dev_type) {
|
|
case MAXIM_DEVICE_TYPE_MAX77836:
|
|
return max77836_regulator_matches[index].of_node;
|
|
|
|
case MAXIM_DEVICE_TYPE_MAX14577:
|
|
default:
|
|
return max14577_regulator_matches[index].of_node;
|
|
}
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev,
|
|
enum maxim_device_type dev_type)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline struct regulator_init_data *match_init_data(int index,
|
|
enum maxim_device_type dev_type)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static inline struct device_node *match_of_node(int index,
|
|
enum maxim_device_type dev_type)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
/**
|
|
* Registers for regulators of max77836 use different I2C slave addresses so
|
|
* different regmaps must be used for them.
|
|
*
|
|
* Returns proper regmap for accessing regulator passed by id.
|
|
*/
|
|
static struct regmap *max14577_get_regmap(struct max14577 *max14577,
|
|
int reg_id)
|
|
{
|
|
switch (max14577->dev_type) {
|
|
case MAXIM_DEVICE_TYPE_MAX77836:
|
|
switch (reg_id) {
|
|
case MAX77836_SAFEOUT ... MAX77836_CHARGER:
|
|
return max14577->regmap;
|
|
default:
|
|
/* MAX77836_LDO1 ... MAX77836_LDO2 */
|
|
return max14577->regmap_pmic;
|
|
}
|
|
|
|
case MAXIM_DEVICE_TYPE_MAX14577:
|
|
default:
|
|
return max14577->regmap;
|
|
}
|
|
}
|
|
|
|
static int max14577_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
|
|
struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);
|
|
int i, ret;
|
|
struct regulator_config config = {};
|
|
const struct regulator_desc *supported_regulators;
|
|
unsigned int supported_regulators_size;
|
|
enum maxim_device_type dev_type = max14577->dev_type;
|
|
|
|
ret = max14577_regulator_dt_parse_pdata(pdev, dev_type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (dev_type) {
|
|
case MAXIM_DEVICE_TYPE_MAX77836:
|
|
supported_regulators = max77836_supported_regulators;
|
|
supported_regulators_size = ARRAY_SIZE(max77836_supported_regulators);
|
|
break;
|
|
case MAXIM_DEVICE_TYPE_MAX14577:
|
|
default:
|
|
supported_regulators = max14577_supported_regulators;
|
|
supported_regulators_size = ARRAY_SIZE(max14577_supported_regulators);
|
|
}
|
|
|
|
config.dev = &pdev->dev;
|
|
config.driver_data = max14577;
|
|
|
|
for (i = 0; i < supported_regulators_size; i++) {
|
|
struct regulator_dev *regulator;
|
|
/*
|
|
* Index of supported_regulators[] is also the id and must
|
|
* match index of pdata->regulators[].
|
|
*/
|
|
if (pdata && pdata->regulators) {
|
|
config.init_data = pdata->regulators[i].initdata;
|
|
config.of_node = pdata->regulators[i].of_node;
|
|
} else {
|
|
config.init_data = match_init_data(i, dev_type);
|
|
config.of_node = match_of_node(i, dev_type);
|
|
}
|
|
config.regmap = max14577_get_regmap(max14577,
|
|
supported_regulators[i].id);
|
|
|
|
regulator = devm_regulator_register(&pdev->dev,
|
|
&supported_regulators[i], &config);
|
|
if (IS_ERR(regulator)) {
|
|
ret = PTR_ERR(regulator);
|
|
dev_err(&pdev->dev,
|
|
"Regulator init failed for %d/%s with error: %d\n",
|
|
i, supported_regulators[i].name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct platform_device_id max14577_regulator_id[] = {
|
|
{ "max14577-regulator", MAXIM_DEVICE_TYPE_MAX14577, },
|
|
{ "max77836-regulator", MAXIM_DEVICE_TYPE_MAX77836, },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, max14577_regulator_id);
|
|
|
|
static struct platform_driver max14577_regulator_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "max14577-regulator",
|
|
},
|
|
.probe = max14577_regulator_probe,
|
|
.id_table = max14577_regulator_id,
|
|
};
|
|
|
|
static int __init max14577_regulator_init(void)
|
|
{
|
|
/* Check for valid values for charger */
|
|
BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
|
|
MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
|
|
MAX14577_REGULATOR_CURRENT_LIMIT_MAX);
|
|
BUILD_BUG_ON(MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START +
|
|
MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
|
|
MAX77836_REGULATOR_CURRENT_LIMIT_MAX);
|
|
/* Valid charger current values must be provided for each chipset */
|
|
BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);
|
|
|
|
BUILD_BUG_ON(ARRAY_SIZE(max14577_supported_regulators) != MAX14577_REGULATOR_NUM);
|
|
BUILD_BUG_ON(ARRAY_SIZE(max77836_supported_regulators) != MAX77836_REGULATOR_NUM);
|
|
|
|
BUILD_BUG_ON(MAX77836_REGULATOR_LDO_VOLTAGE_MIN +
|
|
(MAX77836_REGULATOR_LDO_VOLTAGE_STEP *
|
|
(MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM - 1)) !=
|
|
MAX77836_REGULATOR_LDO_VOLTAGE_MAX);
|
|
|
|
return platform_driver_register(&max14577_regulator_driver);
|
|
}
|
|
subsys_initcall(max14577_regulator_init);
|
|
|
|
static void __exit max14577_regulator_exit(void)
|
|
{
|
|
platform_driver_unregister(&max14577_regulator_driver);
|
|
}
|
|
module_exit(max14577_regulator_exit);
|
|
|
|
MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
|
|
MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:max14577-regulator");
|