mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 13:46:47 +07:00
979b907fa5
SiRFprimaII is the latest generation application processor from CSR’s multi-function SoC product family. The SoC support codes are in arch/arm/mach-prima2 from Linux mainline 3.0. There are two I2C controllers on primaII, features include: * Two I2C controller modules are on chip * RISC I/O bus read write register * Up to 16 bytes data buffer for issuing commands and writing data at the same time * Up to 16 commands, and receiving read data 16 bytes at a time * Error INT report (ACK check) * No-ACK bus protocols (SCCB bus protocols) Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Xiangzhen Ye <Xiangzhen.Ye@csr.com> Signed-off-by: Yuping Luo <Yuping.Luo@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
460 lines
12 KiB
C
460 lines
12 KiB
C
/*
|
|
* I2C bus driver for CSR SiRFprimaII
|
|
*
|
|
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
|
|
*
|
|
* Licensed under GPLv2 or later.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#define SIRFSOC_I2C_CLK_CTRL 0x00
|
|
#define SIRFSOC_I2C_STATUS 0x0C
|
|
#define SIRFSOC_I2C_CTRL 0x10
|
|
#define SIRFSOC_I2C_IO_CTRL 0x14
|
|
#define SIRFSOC_I2C_SDA_DELAY 0x18
|
|
#define SIRFSOC_I2C_CMD_START 0x1C
|
|
#define SIRFSOC_I2C_CMD_BUF 0x30
|
|
#define SIRFSOC_I2C_DATA_BUF 0x80
|
|
|
|
#define SIRFSOC_I2C_CMD_BUF_MAX 16
|
|
#define SIRFSOC_I2C_DATA_BUF_MAX 16
|
|
|
|
#define SIRFSOC_I2C_CMD(x) (SIRFSOC_I2C_CMD_BUF + (x)*0x04)
|
|
#define SIRFSOC_I2C_DATA_MASK(x) (0xFF<<(((x)&3)*8))
|
|
#define SIRFSOC_I2C_DATA_SHIFT(x) (((x)&3)*8)
|
|
|
|
#define SIRFSOC_I2C_DIV_MASK (0xFFFF)
|
|
|
|
/* I2C status flags */
|
|
#define SIRFSOC_I2C_STAT_BUSY BIT(0)
|
|
#define SIRFSOC_I2C_STAT_TIP BIT(1)
|
|
#define SIRFSOC_I2C_STAT_NACK BIT(2)
|
|
#define SIRFSOC_I2C_STAT_TR_INT BIT(4)
|
|
#define SIRFSOC_I2C_STAT_STOP BIT(6)
|
|
#define SIRFSOC_I2C_STAT_CMD_DONE BIT(8)
|
|
#define SIRFSOC_I2C_STAT_ERR BIT(9)
|
|
#define SIRFSOC_I2C_CMD_INDEX (0x1F<<16)
|
|
|
|
/* I2C control flags */
|
|
#define SIRFSOC_I2C_RESET BIT(0)
|
|
#define SIRFSOC_I2C_CORE_EN BIT(1)
|
|
#define SIRFSOC_I2C_MASTER_MODE BIT(2)
|
|
#define SIRFSOC_I2C_CMD_DONE_EN BIT(11)
|
|
#define SIRFSOC_I2C_ERR_INT_EN BIT(12)
|
|
|
|
#define SIRFSOC_I2C_SDA_DELAY_MASK (0xFF)
|
|
#define SIRFSOC_I2C_SCLF_FILTER (3<<8)
|
|
|
|
#define SIRFSOC_I2C_START_CMD BIT(0)
|
|
|
|
#define SIRFSOC_I2C_CMD_RP(x) ((x)&0x7)
|
|
#define SIRFSOC_I2C_NACK BIT(3)
|
|
#define SIRFSOC_I2C_WRITE BIT(4)
|
|
#define SIRFSOC_I2C_READ BIT(5)
|
|
#define SIRFSOC_I2C_STOP BIT(6)
|
|
#define SIRFSOC_I2C_START BIT(7)
|
|
|
|
#define SIRFSOC_I2C_DEFAULT_SPEED 100000
|
|
|
|
struct sirfsoc_i2c {
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
u32 cmd_ptr; /* Current position in CMD buffer */
|
|
u8 *buf; /* Buffer passed by user */
|
|
u32 msg_len; /* Message length */
|
|
u32 finished_len; /* number of bytes read/written */
|
|
u32 read_cmd_len; /* number of read cmd sent */
|
|
int msg_read; /* 1 indicates a read message */
|
|
int err_status; /* 1 indicates an error on bus */
|
|
|
|
u32 sda_delay; /* For suspend/resume */
|
|
u32 clk_div;
|
|
int last; /* Last message in transfer, STOP cmd can be sent */
|
|
|
|
struct completion done; /* indicates completion of message transfer */
|
|
struct i2c_adapter adapter;
|
|
};
|
|
|
|
static void i2c_sirfsoc_read_data(struct sirfsoc_i2c *siic)
|
|
{
|
|
u32 data = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < siic->read_cmd_len; i++) {
|
|
if (!(i & 0x3))
|
|
data = readl(siic->base + SIRFSOC_I2C_DATA_BUF + i);
|
|
siic->buf[siic->finished_len++] =
|
|
(u8)((data & SIRFSOC_I2C_DATA_MASK(i)) >>
|
|
SIRFSOC_I2C_DATA_SHIFT(i));
|
|
}
|
|
}
|
|
|
|
static void i2c_sirfsoc_queue_cmd(struct sirfsoc_i2c *siic)
|
|
{
|
|
u32 regval;
|
|
int i = 0;
|
|
|
|
if (siic->msg_read) {
|
|
while (((siic->finished_len + i) < siic->msg_len)
|
|
&& (siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX)) {
|
|
regval = SIRFSOC_I2C_READ | SIRFSOC_I2C_CMD_RP(0);
|
|
if (((siic->finished_len + i) ==
|
|
(siic->msg_len - 1)) && siic->last)
|
|
regval |= SIRFSOC_I2C_STOP | SIRFSOC_I2C_NACK;
|
|
writel(regval,
|
|
siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
|
|
i++;
|
|
}
|
|
|
|
siic->read_cmd_len = i;
|
|
} else {
|
|
while ((siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX - 1)
|
|
&& (siic->finished_len < siic->msg_len)) {
|
|
regval = SIRFSOC_I2C_WRITE | SIRFSOC_I2C_CMD_RP(0);
|
|
if ((siic->finished_len == (siic->msg_len - 1))
|
|
&& siic->last)
|
|
regval |= SIRFSOC_I2C_STOP;
|
|
writel(regval,
|
|
siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
|
|
writel(siic->buf[siic->finished_len++],
|
|
siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
|
|
}
|
|
}
|
|
siic->cmd_ptr = 0;
|
|
|
|
/* Trigger the transfer */
|
|
writel(SIRFSOC_I2C_START_CMD, siic->base + SIRFSOC_I2C_CMD_START);
|
|
}
|
|
|
|
static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id)
|
|
{
|
|
struct sirfsoc_i2c *siic = (struct sirfsoc_i2c *)dev_id;
|
|
u32 i2c_stat = readl(siic->base + SIRFSOC_I2C_STATUS);
|
|
|
|
if (i2c_stat & SIRFSOC_I2C_STAT_ERR) {
|
|
/* Error conditions */
|
|
siic->err_status = 1;
|
|
writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS);
|
|
|
|
if (i2c_stat & SIRFSOC_I2C_STAT_NACK)
|
|
dev_err(&siic->adapter.dev, "ACK not received\n");
|
|
else
|
|
dev_err(&siic->adapter.dev, "I2C error\n");
|
|
|
|
complete(&siic->done);
|
|
} else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) {
|
|
/* CMD buffer execution complete */
|
|
if (siic->msg_read)
|
|
i2c_sirfsoc_read_data(siic);
|
|
if (siic->finished_len == siic->msg_len)
|
|
complete(&siic->done);
|
|
else /* Fill a new CMD buffer for left data */
|
|
i2c_sirfsoc_queue_cmd(siic);
|
|
|
|
writel(SIRFSOC_I2C_STAT_CMD_DONE, siic->base + SIRFSOC_I2C_STATUS);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic,
|
|
struct i2c_msg *msg)
|
|
{
|
|
unsigned char addr;
|
|
u32 regval = SIRFSOC_I2C_START | SIRFSOC_I2C_CMD_RP(0) | SIRFSOC_I2C_WRITE;
|
|
|
|
/* no data and last message -> add STOP */
|
|
if (siic->last && (msg->len == 0))
|
|
regval |= SIRFSOC_I2C_STOP;
|
|
|
|
writel(regval, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
|
|
|
|
addr = msg->addr << 1; /* Generate address */
|
|
if (msg->flags & I2C_M_RD)
|
|
addr |= 1;
|
|
|
|
writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
|
|
}
|
|
|
|
static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
|
|
{
|
|
u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL);
|
|
/* timeout waiting for the xfer to finish or fail */
|
|
int timeout = msecs_to_jiffies((msg->len + 1) * 50);
|
|
int ret = 0;
|
|
|
|
i2c_sirfsoc_set_address(siic, msg);
|
|
|
|
writel(regval | SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN,
|
|
siic->base + SIRFSOC_I2C_CTRL);
|
|
i2c_sirfsoc_queue_cmd(siic);
|
|
|
|
if (wait_for_completion_timeout(&siic->done, timeout) == 0) {
|
|
siic->err_status = 1;
|
|
dev_err(&siic->adapter.dev, "Transfer timeout\n");
|
|
}
|
|
|
|
writel(regval & ~(SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN),
|
|
siic->base + SIRFSOC_I2C_CTRL);
|
|
writel(0, siic->base + SIRFSOC_I2C_CMD_START);
|
|
|
|
if (siic->err_status) {
|
|
writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET,
|
|
siic->base + SIRFSOC_I2C_CTRL);
|
|
while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
|
|
cpu_relax();
|
|
|
|
ret = -EIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 i2c_sirfsoc_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static int i2c_sirfsoc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct sirfsoc_i2c *siic = adap->algo_data;
|
|
int i, ret;
|
|
|
|
clk_enable(siic->clk);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
siic->buf = msgs[i].buf;
|
|
siic->msg_len = msgs[i].len;
|
|
siic->msg_read = !!(msgs[i].flags & I2C_M_RD);
|
|
siic->err_status = 0;
|
|
siic->cmd_ptr = 0;
|
|
siic->finished_len = 0;
|
|
siic->last = (i == (num - 1));
|
|
|
|
ret = i2c_sirfsoc_xfer_msg(siic, &msgs[i]);
|
|
if (ret) {
|
|
clk_disable(siic->clk);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
clk_disable(siic->clk);
|
|
return num;
|
|
}
|
|
|
|
/* I2C algorithms associated with this master controller driver */
|
|
static const struct i2c_algorithm i2c_sirfsoc_algo = {
|
|
.master_xfer = i2c_sirfsoc_xfer,
|
|
.functionality = i2c_sirfsoc_func,
|
|
};
|
|
|
|
static int __devinit i2c_sirfsoc_probe(struct platform_device *pdev)
|
|
{
|
|
struct sirfsoc_i2c *siic;
|
|
struct i2c_adapter *adap;
|
|
struct resource *mem_res;
|
|
struct clk *clk;
|
|
int bitrate;
|
|
int ctrl_speed;
|
|
int irq;
|
|
|
|
int err;
|
|
u32 regval;
|
|
|
|
clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
err = PTR_ERR(clk);
|
|
dev_err(&pdev->dev, "Clock get failed\n");
|
|
goto err_get_clk;
|
|
}
|
|
|
|
err = clk_prepare(clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Clock prepare failed\n");
|
|
goto err_clk_prep;
|
|
}
|
|
|
|
err = clk_enable(clk);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Clock enable failed\n");
|
|
goto err_clk_en;
|
|
}
|
|
|
|
ctrl_speed = clk_get_rate(clk);
|
|
|
|
siic = devm_kzalloc(&pdev->dev, sizeof(*siic), GFP_KERNEL);
|
|
if (!siic) {
|
|
dev_err(&pdev->dev, "Can't allocate driver data\n");
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
adap = &siic->adapter;
|
|
adap->class = I2C_CLASS_HWMON;
|
|
|
|
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (mem_res == NULL) {
|
|
dev_err(&pdev->dev, "Unable to get MEM resource\n");
|
|
err = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
siic->base = devm_request_and_ioremap(&pdev->dev, mem_res);
|
|
if (siic->base == NULL) {
|
|
dev_err(&pdev->dev, "IO remap failed!\n");
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
err = irq;
|
|
goto out;
|
|
}
|
|
err = devm_request_irq(&pdev->dev, irq, i2c_sirfsoc_irq, 0,
|
|
dev_name(&pdev->dev), siic);
|
|
if (err)
|
|
goto out;
|
|
|
|
adap->algo = &i2c_sirfsoc_algo;
|
|
adap->algo_data = siic;
|
|
|
|
adap->dev.parent = &pdev->dev;
|
|
adap->nr = pdev->id;
|
|
|
|
strlcpy(adap->name, "sirfsoc-i2c", sizeof(adap->name));
|
|
|
|
platform_set_drvdata(pdev, adap);
|
|
init_completion(&siic->done);
|
|
|
|
/* Controller Initalisation */
|
|
|
|
writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
|
|
while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
|
|
cpu_relax();
|
|
writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE,
|
|
siic->base + SIRFSOC_I2C_CTRL);
|
|
|
|
siic->clk = clk;
|
|
|
|
err = of_property_read_u32(pdev->dev.of_node,
|
|
"clock-frequency", &bitrate);
|
|
if (err < 0)
|
|
bitrate = SIRFSOC_I2C_DEFAULT_SPEED;
|
|
|
|
if (bitrate < 100000)
|
|
regval =
|
|
(2 * ctrl_speed) / (2 * bitrate * 11);
|
|
else
|
|
regval = ctrl_speed / (bitrate * 5);
|
|
|
|
writel(regval, siic->base + SIRFSOC_I2C_CLK_CTRL);
|
|
if (regval > 0xFF)
|
|
writel(0xFF, siic->base + SIRFSOC_I2C_SDA_DELAY);
|
|
else
|
|
writel(regval, siic->base + SIRFSOC_I2C_SDA_DELAY);
|
|
|
|
err = i2c_add_numbered_adapter(adap);
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "Can't add new i2c adapter\n");
|
|
goto out;
|
|
}
|
|
|
|
clk_disable(clk);
|
|
|
|
dev_info(&pdev->dev, " I2C adapter ready to operate\n");
|
|
|
|
return 0;
|
|
|
|
out:
|
|
clk_disable(clk);
|
|
err_clk_en:
|
|
clk_unprepare(clk);
|
|
err_clk_prep:
|
|
clk_put(clk);
|
|
err_get_clk:
|
|
return err;
|
|
}
|
|
|
|
static int __devexit i2c_sirfsoc_remove(struct platform_device *pdev)
|
|
{
|
|
struct i2c_adapter *adapter = platform_get_drvdata(pdev);
|
|
struct sirfsoc_i2c *siic = adapter->algo_data;
|
|
|
|
writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
|
|
i2c_del_adapter(adapter);
|
|
clk_unprepare(siic->clk);
|
|
clk_put(siic->clk);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int i2c_sirfsoc_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct i2c_adapter *adapter = platform_get_drvdata(pdev);
|
|
struct sirfsoc_i2c *siic = adapter->algo_data;
|
|
|
|
clk_enable(siic->clk);
|
|
siic->sda_delay = readl(siic->base + SIRFSOC_I2C_SDA_DELAY);
|
|
siic->clk_div = readl(siic->base + SIRFSOC_I2C_CLK_CTRL);
|
|
clk_disable(siic->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_sirfsoc_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct i2c_adapter *adapter = platform_get_drvdata(pdev);
|
|
struct sirfsoc_i2c *siic = adapter->algo_data;
|
|
|
|
clk_enable(siic->clk);
|
|
writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
|
|
writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE,
|
|
siic->base + SIRFSOC_I2C_CTRL);
|
|
writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL);
|
|
writel(siic->sda_delay, siic->base + SIRFSOC_I2C_SDA_DELAY);
|
|
clk_disable(siic->clk);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops i2c_sirfsoc_pm_ops = {
|
|
.suspend = i2c_sirfsoc_suspend,
|
|
.resume = i2c_sirfsoc_resume,
|
|
};
|
|
#endif
|
|
|
|
static const struct of_device_id sirfsoc_i2c_of_match[] __devinitconst = {
|
|
{ .compatible = "sirf,prima2-i2c", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sirfsoc_i2c_of_match);
|
|
|
|
static struct platform_driver i2c_sirfsoc_driver = {
|
|
.driver = {
|
|
.name = "sirfsoc_i2c",
|
|
.owner = THIS_MODULE,
|
|
#ifdef CONFIG_PM
|
|
.pm = &i2c_sirfsoc_pm_ops,
|
|
#endif
|
|
.of_match_table = sirfsoc_i2c_of_match,
|
|
},
|
|
.probe = i2c_sirfsoc_probe,
|
|
.remove = __devexit_p(i2c_sirfsoc_remove),
|
|
};
|
|
module_platform_driver(i2c_sirfsoc_driver);
|
|
|
|
MODULE_DESCRIPTION("SiRF SoC I2C master controller driver");
|
|
MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, "
|
|
"Xiangzhen Ye <Xiangzhen.Ye@csr.com>");
|
|
MODULE_LICENSE("GPL v2");
|