linux_dsm_epyc7002/drivers/usb/chipidea/usbmisc_imx6q.c
Richard Zhao d142d6be23 USB: chipidea: add imx usbmisc support
i.MX usb controllers share non-core registers, which may include
SoC specific controls. We turn it into a usbmisc device and usbmisc
driver set operations needed by ci13xxx_imx driver.

For example, Sabrelite board has bad over-current design, we can
usbmisc to disable over-current detection.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12 11:20:38 -07:00

163 lines
3.5 KiB
C

/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include "ci13xxx_imx.h"
#define USB_DEV_MAX 4
#define BM_OVER_CUR_DIS BIT(7)
struct imx6q_usbmisc {
void __iomem *base;
spinlock_t lock;
struct clk *clk;
struct usbmisc_usb_device usbdev[USB_DEV_MAX];
};
static struct imx6q_usbmisc *usbmisc;
static struct usbmisc_usb_device *get_usbdev(struct device *dev)
{
int i, ret;
for (i = 0; i < USB_DEV_MAX; i++) {
if (usbmisc->usbdev[i].dev == dev)
return &usbmisc->usbdev[i];
else if (!usbmisc->usbdev[i].dev)
break;
}
if (i >= USB_DEV_MAX)
return ERR_PTR(-EBUSY);
ret = usbmisc_get_init_data(dev, &usbmisc->usbdev[i]);
if (ret)
return ERR_PTR(ret);
return &usbmisc->usbdev[i];
}
static int usbmisc_imx6q_init(struct device *dev)
{
struct usbmisc_usb_device *usbdev;
unsigned long flags;
u32 reg;
usbdev = get_usbdev(dev);
if (IS_ERR(usbdev))
return PTR_ERR(usbdev);
if (usbdev->disable_oc) {
spin_lock_irqsave(&usbmisc->lock, flags);
reg = readl(usbmisc->base + usbdev->index * 4);
writel(reg | BM_OVER_CUR_DIS,
usbmisc->base + usbdev->index * 4);
spin_unlock_irqrestore(&usbmisc->lock, flags);
}
return 0;
}
static const struct usbmisc_ops imx6q_usbmisc_ops = {
.init = usbmisc_imx6q_init,
};
static const struct of_device_id usbmisc_imx6q_dt_ids[] = {
{ .compatible = "fsl,imx6q-usbmisc"},
{ /* sentinel */ }
};
static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
{
struct resource *res;
struct imx6q_usbmisc *data;
int ret;
if (usbmisc)
return -EBUSY;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
spin_lock_init(&data->lock);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
data->base = devm_request_and_ioremap(&pdev->dev, res);
if (!data->base)
return -EADDRNOTAVAIL;
data->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(data->clk)) {
dev_err(&pdev->dev,
"failed to get clock, err=%ld\n", PTR_ERR(data->clk));
return PTR_ERR(data->clk);
}
ret = clk_prepare_enable(data->clk);
if (ret) {
dev_err(&pdev->dev,
"clk_prepare_enable failed, err=%d\n", ret);
return ret;
}
ret = usbmisc_set_ops(&imx6q_usbmisc_ops);
if (ret) {
clk_disable_unprepare(data->clk);
return ret;
}
usbmisc = data;
return 0;
}
static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
{
usbmisc_unset_ops(&imx6q_usbmisc_ops);
clk_disable_unprepare(usbmisc->clk);
return 0;
}
static struct platform_driver usbmisc_imx6q_driver = {
.probe = usbmisc_imx6q_probe,
.remove = __devexit_p(usbmisc_imx6q_remove),
.driver = {
.name = "usbmisc_imx6q",
.owner = THIS_MODULE,
.of_match_table = usbmisc_imx6q_dt_ids,
},
};
int __init usbmisc_imx6q_drv_init(void)
{
return platform_driver_register(&usbmisc_imx6q_driver);
}
subsys_initcall(usbmisc_imx6q_drv_init);
void __exit usbmisc_imx6q_drv_exit(void)
{
platform_driver_unregister(&usbmisc_imx6q_driver);
}
module_exit(usbmisc_imx6q_drv_exit);
MODULE_ALIAS("platform:usbmisc-imx6q");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("driver for imx6q usb non-core registers");
MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");