mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 08:46:49 +07:00
389a00d3ad
EOImode1 is only used for the root controller and hence only the root controller uses the eoimode1 functions for handling interrupts. However, if the root controller supports EOImode1, then the EOImodeNS bit will be set for all GICs, enabling EOImode1. This is not what we want and this causes interrupts on non-root GICs to only be dropped in priority but never deactivated. Therefore, only set the EOImodeNS bit for the root controller. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
1368 lines
36 KiB
C
1368 lines
36 KiB
C
/*
|
|
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Interrupt architecture for the GIC:
|
|
*
|
|
* o There is one Interrupt Distributor, which receives interrupts
|
|
* from system devices and sends them to the Interrupt Controllers.
|
|
*
|
|
* o There is one CPU Interface per CPU, which sends interrupts sent
|
|
* by the Distributor, and interrupts generated locally, to the
|
|
* associated CPU. The base address of the CPU interface is usually
|
|
* aliased so that the same address points to different chips depending
|
|
* on the CPU it is accessed from.
|
|
*
|
|
* Note that IRQs 0-31 are special - they are local to each CPU.
|
|
* As such, the enable set/clear, pending set/clear and active bit
|
|
* registers are banked per-cpu for these sources.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/irqchip/arm-gic.h>
|
|
|
|
#include <asm/cputype.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/exception.h>
|
|
#include <asm/smp_plat.h>
|
|
#include <asm/virt.h>
|
|
|
|
#include "irq-gic-common.h"
|
|
|
|
#ifdef CONFIG_ARM64
|
|
#include <asm/cpufeature.h>
|
|
|
|
static void gic_check_cpu_features(void)
|
|
{
|
|
WARN_TAINT_ONCE(cpus_have_cap(ARM64_HAS_SYSREG_GIC_CPUIF),
|
|
TAINT_CPU_OUT_OF_SPEC,
|
|
"GICv3 system registers enabled, broken firmware!\n");
|
|
}
|
|
#else
|
|
#define gic_check_cpu_features() do { } while(0)
|
|
#endif
|
|
|
|
union gic_base {
|
|
void __iomem *common_base;
|
|
void __percpu * __iomem *percpu_base;
|
|
};
|
|
|
|
struct gic_chip_data {
|
|
struct irq_chip chip;
|
|
union gic_base dist_base;
|
|
union gic_base cpu_base;
|
|
#ifdef CONFIG_CPU_PM
|
|
u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
|
|
u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
|
|
u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
|
|
u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
|
|
u32 __percpu *saved_ppi_enable;
|
|
u32 __percpu *saved_ppi_active;
|
|
u32 __percpu *saved_ppi_conf;
|
|
#endif
|
|
struct irq_domain *domain;
|
|
unsigned int gic_irqs;
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
void __iomem *(*get_base)(union gic_base *);
|
|
#endif
|
|
};
|
|
|
|
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
|
|
|
|
/*
|
|
* The GIC mapping of CPU interfaces does not necessarily match
|
|
* the logical CPU numbering. Let's use a mapping as returned
|
|
* by the GIC itself.
|
|
*/
|
|
#define NR_GIC_CPU_IF 8
|
|
static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
|
|
|
|
static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
|
|
|
|
static struct gic_chip_data gic_data[CONFIG_ARM_GIC_MAX_NR] __read_mostly;
|
|
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
static void __iomem *gic_get_percpu_base(union gic_base *base)
|
|
{
|
|
return raw_cpu_read(*base->percpu_base);
|
|
}
|
|
|
|
static void __iomem *gic_get_common_base(union gic_base *base)
|
|
{
|
|
return base->common_base;
|
|
}
|
|
|
|
static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
|
|
{
|
|
return data->get_base(&data->dist_base);
|
|
}
|
|
|
|
static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
|
|
{
|
|
return data->get_base(&data->cpu_base);
|
|
}
|
|
|
|
static inline void gic_set_base_accessor(struct gic_chip_data *data,
|
|
void __iomem *(*f)(union gic_base *))
|
|
{
|
|
data->get_base = f;
|
|
}
|
|
#else
|
|
#define gic_data_dist_base(d) ((d)->dist_base.common_base)
|
|
#define gic_data_cpu_base(d) ((d)->cpu_base.common_base)
|
|
#define gic_set_base_accessor(d, f)
|
|
#endif
|
|
|
|
static inline void __iomem *gic_dist_base(struct irq_data *d)
|
|
{
|
|
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
|
|
return gic_data_dist_base(gic_data);
|
|
}
|
|
|
|
static inline void __iomem *gic_cpu_base(struct irq_data *d)
|
|
{
|
|
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
|
|
return gic_data_cpu_base(gic_data);
|
|
}
|
|
|
|
static inline unsigned int gic_irq(struct irq_data *d)
|
|
{
|
|
return d->hwirq;
|
|
}
|
|
|
|
static inline bool cascading_gic_irq(struct irq_data *d)
|
|
{
|
|
void *data = irq_data_get_irq_handler_data(d);
|
|
|
|
/*
|
|
* If handler_data is set, this is a cascading interrupt, and
|
|
* it cannot possibly be forwarded.
|
|
*/
|
|
return data != NULL;
|
|
}
|
|
|
|
/*
|
|
* Routines to acknowledge, disable and enable interrupts
|
|
*/
|
|
static void gic_poke_irq(struct irq_data *d, u32 offset)
|
|
{
|
|
u32 mask = 1 << (gic_irq(d) % 32);
|
|
writel_relaxed(mask, gic_dist_base(d) + offset + (gic_irq(d) / 32) * 4);
|
|
}
|
|
|
|
static int gic_peek_irq(struct irq_data *d, u32 offset)
|
|
{
|
|
u32 mask = 1 << (gic_irq(d) % 32);
|
|
return !!(readl_relaxed(gic_dist_base(d) + offset + (gic_irq(d) / 32) * 4) & mask);
|
|
}
|
|
|
|
static void gic_mask_irq(struct irq_data *d)
|
|
{
|
|
gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR);
|
|
}
|
|
|
|
static void gic_eoimode1_mask_irq(struct irq_data *d)
|
|
{
|
|
gic_mask_irq(d);
|
|
/*
|
|
* When masking a forwarded interrupt, make sure it is
|
|
* deactivated as well.
|
|
*
|
|
* This ensures that an interrupt that is getting
|
|
* disabled/masked will not get "stuck", because there is
|
|
* noone to deactivate it (guest is being terminated).
|
|
*/
|
|
if (irqd_is_forwarded_to_vcpu(d))
|
|
gic_poke_irq(d, GIC_DIST_ACTIVE_CLEAR);
|
|
}
|
|
|
|
static void gic_unmask_irq(struct irq_data *d)
|
|
{
|
|
gic_poke_irq(d, GIC_DIST_ENABLE_SET);
|
|
}
|
|
|
|
static void gic_eoi_irq(struct irq_data *d)
|
|
{
|
|
writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
|
|
}
|
|
|
|
static void gic_eoimode1_eoi_irq(struct irq_data *d)
|
|
{
|
|
/* Do not deactivate an IRQ forwarded to a vcpu. */
|
|
if (irqd_is_forwarded_to_vcpu(d))
|
|
return;
|
|
|
|
writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_DEACTIVATE);
|
|
}
|
|
|
|
static int gic_irq_set_irqchip_state(struct irq_data *d,
|
|
enum irqchip_irq_state which, bool val)
|
|
{
|
|
u32 reg;
|
|
|
|
switch (which) {
|
|
case IRQCHIP_STATE_PENDING:
|
|
reg = val ? GIC_DIST_PENDING_SET : GIC_DIST_PENDING_CLEAR;
|
|
break;
|
|
|
|
case IRQCHIP_STATE_ACTIVE:
|
|
reg = val ? GIC_DIST_ACTIVE_SET : GIC_DIST_ACTIVE_CLEAR;
|
|
break;
|
|
|
|
case IRQCHIP_STATE_MASKED:
|
|
reg = val ? GIC_DIST_ENABLE_CLEAR : GIC_DIST_ENABLE_SET;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
gic_poke_irq(d, reg);
|
|
return 0;
|
|
}
|
|
|
|
static int gic_irq_get_irqchip_state(struct irq_data *d,
|
|
enum irqchip_irq_state which, bool *val)
|
|
{
|
|
switch (which) {
|
|
case IRQCHIP_STATE_PENDING:
|
|
*val = gic_peek_irq(d, GIC_DIST_PENDING_SET);
|
|
break;
|
|
|
|
case IRQCHIP_STATE_ACTIVE:
|
|
*val = gic_peek_irq(d, GIC_DIST_ACTIVE_SET);
|
|
break;
|
|
|
|
case IRQCHIP_STATE_MASKED:
|
|
*val = !gic_peek_irq(d, GIC_DIST_ENABLE_SET);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gic_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
void __iomem *base = gic_dist_base(d);
|
|
unsigned int gicirq = gic_irq(d);
|
|
|
|
/* Interrupt configuration for SGIs can't be changed */
|
|
if (gicirq < 16)
|
|
return -EINVAL;
|
|
|
|
/* SPIs have restrictions on the supported types */
|
|
if (gicirq >= 32 && type != IRQ_TYPE_LEVEL_HIGH &&
|
|
type != IRQ_TYPE_EDGE_RISING)
|
|
return -EINVAL;
|
|
|
|
return gic_configure_irq(gicirq, type, base, NULL);
|
|
}
|
|
|
|
static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
|
|
{
|
|
/* Only interrupts on the primary GIC can be forwarded to a vcpu. */
|
|
if (cascading_gic_irq(d))
|
|
return -EINVAL;
|
|
|
|
if (vcpu)
|
|
irqd_set_forwarded_to_vcpu(d);
|
|
else
|
|
irqd_clr_forwarded_to_vcpu(d);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
|
|
bool force)
|
|
{
|
|
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
|
|
unsigned int cpu, shift = (gic_irq(d) % 4) * 8;
|
|
u32 val, mask, bit;
|
|
unsigned long flags;
|
|
|
|
if (!force)
|
|
cpu = cpumask_any_and(mask_val, cpu_online_mask);
|
|
else
|
|
cpu = cpumask_first(mask_val);
|
|
|
|
if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
|
|
return -EINVAL;
|
|
|
|
raw_spin_lock_irqsave(&irq_controller_lock, flags);
|
|
mask = 0xff << shift;
|
|
bit = gic_cpu_map[cpu] << shift;
|
|
val = readl_relaxed(reg) & ~mask;
|
|
writel_relaxed(val | bit, reg);
|
|
raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
|
|
|
|
return IRQ_SET_MASK_OK;
|
|
}
|
|
#endif
|
|
|
|
static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
|
|
{
|
|
u32 irqstat, irqnr;
|
|
struct gic_chip_data *gic = &gic_data[0];
|
|
void __iomem *cpu_base = gic_data_cpu_base(gic);
|
|
|
|
do {
|
|
irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
|
|
irqnr = irqstat & GICC_IAR_INT_ID_MASK;
|
|
|
|
if (likely(irqnr > 15 && irqnr < 1020)) {
|
|
if (static_key_true(&supports_deactivate))
|
|
writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
|
|
handle_domain_irq(gic->domain, irqnr, regs);
|
|
continue;
|
|
}
|
|
if (irqnr < 16) {
|
|
writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
|
|
if (static_key_true(&supports_deactivate))
|
|
writel_relaxed(irqstat, cpu_base + GIC_CPU_DEACTIVATE);
|
|
#ifdef CONFIG_SMP
|
|
handle_IPI(irqnr, regs);
|
|
#endif
|
|
continue;
|
|
}
|
|
break;
|
|
} while (1);
|
|
}
|
|
|
|
static void gic_handle_cascade_irq(struct irq_desc *desc)
|
|
{
|
|
struct gic_chip_data *chip_data = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
unsigned int cascade_irq, gic_irq;
|
|
unsigned long status;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
|
|
gic_irq = (status & GICC_IAR_INT_ID_MASK);
|
|
if (gic_irq == GICC_INT_SPURIOUS)
|
|
goto out;
|
|
|
|
cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
|
|
if (unlikely(gic_irq < 32 || gic_irq > 1020))
|
|
handle_bad_irq(desc);
|
|
else
|
|
generic_handle_irq(cascade_irq);
|
|
|
|
out:
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static struct irq_chip gic_chip = {
|
|
.irq_mask = gic_mask_irq,
|
|
.irq_unmask = gic_unmask_irq,
|
|
.irq_eoi = gic_eoi_irq,
|
|
.irq_set_type = gic_set_type,
|
|
.irq_get_irqchip_state = gic_irq_get_irqchip_state,
|
|
.irq_set_irqchip_state = gic_irq_set_irqchip_state,
|
|
.flags = IRQCHIP_SET_TYPE_MASKED |
|
|
IRQCHIP_SKIP_SET_WAKE |
|
|
IRQCHIP_MASK_ON_SUSPEND,
|
|
};
|
|
|
|
static struct irq_chip gic_eoimode1_chip = {
|
|
.name = "GICv2",
|
|
.irq_mask = gic_eoimode1_mask_irq,
|
|
.irq_unmask = gic_unmask_irq,
|
|
.irq_eoi = gic_eoimode1_eoi_irq,
|
|
.irq_set_type = gic_set_type,
|
|
.irq_get_irqchip_state = gic_irq_get_irqchip_state,
|
|
.irq_set_irqchip_state = gic_irq_set_irqchip_state,
|
|
.irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity,
|
|
.flags = IRQCHIP_SET_TYPE_MASKED |
|
|
IRQCHIP_SKIP_SET_WAKE |
|
|
IRQCHIP_MASK_ON_SUSPEND,
|
|
};
|
|
|
|
void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
|
|
{
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
irq_set_chained_handler_and_data(irq, gic_handle_cascade_irq,
|
|
&gic_data[gic_nr]);
|
|
}
|
|
|
|
static u8 gic_get_cpumask(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *base = gic_data_dist_base(gic);
|
|
u32 mask, i;
|
|
|
|
for (i = mask = 0; i < 32; i += 4) {
|
|
mask = readl_relaxed(base + GIC_DIST_TARGET + i);
|
|
mask |= mask >> 16;
|
|
mask |= mask >> 8;
|
|
if (mask)
|
|
break;
|
|
}
|
|
|
|
if (!mask && num_possible_cpus() > 1)
|
|
pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
|
|
|
|
return mask;
|
|
}
|
|
|
|
static void gic_cpu_if_up(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *cpu_base = gic_data_cpu_base(gic);
|
|
u32 bypass = 0;
|
|
u32 mode = 0;
|
|
|
|
if (gic == &gic_data[0] && static_key_true(&supports_deactivate))
|
|
mode = GIC_CPU_CTRL_EOImodeNS;
|
|
|
|
/*
|
|
* Preserve bypass disable bits to be written back later
|
|
*/
|
|
bypass = readl(cpu_base + GIC_CPU_CTRL);
|
|
bypass &= GICC_DIS_BYPASS_MASK;
|
|
|
|
writel_relaxed(bypass | mode | GICC_ENABLE, cpu_base + GIC_CPU_CTRL);
|
|
}
|
|
|
|
|
|
static void __init gic_dist_init(struct gic_chip_data *gic)
|
|
{
|
|
unsigned int i;
|
|
u32 cpumask;
|
|
unsigned int gic_irqs = gic->gic_irqs;
|
|
void __iomem *base = gic_data_dist_base(gic);
|
|
|
|
writel_relaxed(GICD_DISABLE, base + GIC_DIST_CTRL);
|
|
|
|
/*
|
|
* Set all global interrupts to this CPU only.
|
|
*/
|
|
cpumask = gic_get_cpumask(gic);
|
|
cpumask |= cpumask << 8;
|
|
cpumask |= cpumask << 16;
|
|
for (i = 32; i < gic_irqs; i += 4)
|
|
writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
|
|
|
|
gic_dist_config(base, gic_irqs, NULL);
|
|
|
|
writel_relaxed(GICD_ENABLE, base + GIC_DIST_CTRL);
|
|
}
|
|
|
|
static void gic_cpu_init(struct gic_chip_data *gic)
|
|
{
|
|
void __iomem *dist_base = gic_data_dist_base(gic);
|
|
void __iomem *base = gic_data_cpu_base(gic);
|
|
unsigned int cpu_mask, cpu = smp_processor_id();
|
|
int i;
|
|
|
|
/*
|
|
* Setting up the CPU map is only relevant for the primary GIC
|
|
* because any nested/secondary GICs do not directly interface
|
|
* with the CPU(s).
|
|
*/
|
|
if (gic == &gic_data[0]) {
|
|
/*
|
|
* Get what the GIC says our CPU mask is.
|
|
*/
|
|
BUG_ON(cpu >= NR_GIC_CPU_IF);
|
|
cpu_mask = gic_get_cpumask(gic);
|
|
gic_cpu_map[cpu] = cpu_mask;
|
|
|
|
/*
|
|
* Clear our mask from the other map entries in case they're
|
|
* still undefined.
|
|
*/
|
|
for (i = 0; i < NR_GIC_CPU_IF; i++)
|
|
if (i != cpu)
|
|
gic_cpu_map[i] &= ~cpu_mask;
|
|
}
|
|
|
|
gic_cpu_config(dist_base, NULL);
|
|
|
|
writel_relaxed(GICC_INT_PRI_THRESHOLD, base + GIC_CPU_PRIMASK);
|
|
gic_cpu_if_up(gic);
|
|
}
|
|
|
|
int gic_cpu_if_down(unsigned int gic_nr)
|
|
{
|
|
void __iomem *cpu_base;
|
|
u32 val = 0;
|
|
|
|
if (gic_nr >= CONFIG_ARM_GIC_MAX_NR)
|
|
return -EINVAL;
|
|
|
|
cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
|
|
val = readl(cpu_base + GIC_CPU_CTRL);
|
|
val &= ~GICC_ENABLE;
|
|
writel_relaxed(val, cpu_base + GIC_CPU_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_PM
|
|
/*
|
|
* Saves the GIC distributor registers during suspend or idle. Must be called
|
|
* with interrupts disabled but before powering down the GIC. After calling
|
|
* this function, no interrupts will be delivered by the GIC, and another
|
|
* platform-specific wakeup source must be enabled.
|
|
*/
|
|
static void gic_dist_save(unsigned int gic_nr)
|
|
{
|
|
unsigned int gic_irqs;
|
|
void __iomem *dist_base;
|
|
int i;
|
|
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base)
|
|
return;
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
|
|
gic_data[gic_nr].saved_spi_conf[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
gic_data[gic_nr].saved_spi_target[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
|
|
gic_data[gic_nr].saved_spi_enable[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
|
|
gic_data[gic_nr].saved_spi_active[i] =
|
|
readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
|
|
}
|
|
|
|
/*
|
|
* Restores the GIC distributor registers during resume or when coming out of
|
|
* idle. Must be called before enabling interrupts. If a level interrupt
|
|
* that occured while the GIC was suspended is still present, it will be
|
|
* handled normally, but any edge interrupts that occured will not be seen by
|
|
* the GIC and need to be handled by the platform-specific wakeup source.
|
|
*/
|
|
static void gic_dist_restore(unsigned int gic_nr)
|
|
{
|
|
unsigned int gic_irqs;
|
|
unsigned int i;
|
|
void __iomem *dist_base;
|
|
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base)
|
|
return;
|
|
|
|
writel_relaxed(GICD_DISABLE, dist_base + GIC_DIST_CTRL);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
|
|
dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
writel_relaxed(GICD_INT_DEF_PRI_X4,
|
|
dist_base + GIC_DIST_PRI + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
|
|
dist_base + GIC_DIST_TARGET + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
|
|
writel_relaxed(GICD_INT_EN_CLR_X32,
|
|
dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
|
|
dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
}
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
|
|
writel_relaxed(GICD_INT_EN_CLR_X32,
|
|
dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
|
|
writel_relaxed(gic_data[gic_nr].saved_spi_active[i],
|
|
dist_base + GIC_DIST_ACTIVE_SET + i * 4);
|
|
}
|
|
|
|
writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL);
|
|
}
|
|
|
|
static void gic_cpu_save(unsigned int gic_nr)
|
|
{
|
|
int i;
|
|
u32 *ptr;
|
|
void __iomem *dist_base;
|
|
void __iomem *cpu_base;
|
|
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base || !cpu_base)
|
|
return;
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
|
|
ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
}
|
|
|
|
static void gic_cpu_restore(unsigned int gic_nr)
|
|
{
|
|
int i;
|
|
u32 *ptr;
|
|
void __iomem *dist_base;
|
|
void __iomem *cpu_base;
|
|
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
|
|
|
|
if (!dist_base || !cpu_base)
|
|
return;
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
|
|
writel_relaxed(GICD_INT_EN_CLR_X32,
|
|
dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
|
|
}
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
|
|
writel_relaxed(GICD_INT_EN_CLR_X32,
|
|
dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_ACTIVE_SET + i * 4);
|
|
}
|
|
|
|
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
|
|
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
|
|
writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
|
|
writel_relaxed(GICD_INT_DEF_PRI_X4,
|
|
dist_base + GIC_DIST_PRI + i * 4);
|
|
|
|
writel_relaxed(GICC_INT_PRI_THRESHOLD, cpu_base + GIC_CPU_PRIMASK);
|
|
gic_cpu_if_up(&gic_data[gic_nr]);
|
|
}
|
|
|
|
static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < CONFIG_ARM_GIC_MAX_NR; i++) {
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
/* Skip over unused GICs */
|
|
if (!gic_data[i].get_base)
|
|
continue;
|
|
#endif
|
|
switch (cmd) {
|
|
case CPU_PM_ENTER:
|
|
gic_cpu_save(i);
|
|
break;
|
|
case CPU_PM_ENTER_FAILED:
|
|
case CPU_PM_EXIT:
|
|
gic_cpu_restore(i);
|
|
break;
|
|
case CPU_CLUSTER_PM_ENTER:
|
|
gic_dist_save(i);
|
|
break;
|
|
case CPU_CLUSTER_PM_ENTER_FAILED:
|
|
case CPU_CLUSTER_PM_EXIT:
|
|
gic_dist_restore(i);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block gic_notifier_block = {
|
|
.notifier_call = gic_notifier,
|
|
};
|
|
|
|
static void __init gic_pm_init(struct gic_chip_data *gic)
|
|
{
|
|
gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
|
|
sizeof(u32));
|
|
BUG_ON(!gic->saved_ppi_enable);
|
|
|
|
gic->saved_ppi_active = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
|
|
sizeof(u32));
|
|
BUG_ON(!gic->saved_ppi_active);
|
|
|
|
gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
|
|
sizeof(u32));
|
|
BUG_ON(!gic->saved_ppi_conf);
|
|
|
|
if (gic == &gic_data[0])
|
|
cpu_pm_register_notifier(&gic_notifier_block);
|
|
}
|
|
#else
|
|
static void __init gic_pm_init(struct gic_chip_data *gic)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
|
|
{
|
|
int cpu;
|
|
unsigned long flags, map = 0;
|
|
|
|
raw_spin_lock_irqsave(&irq_controller_lock, flags);
|
|
|
|
/* Convert our logical CPU mask into a physical one. */
|
|
for_each_cpu(cpu, mask)
|
|
map |= gic_cpu_map[cpu];
|
|
|
|
/*
|
|
* Ensure that stores to Normal memory are visible to the
|
|
* other CPUs before they observe us issuing the IPI.
|
|
*/
|
|
dmb(ishst);
|
|
|
|
/* this always happens on GIC0 */
|
|
writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
|
|
raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_BL_SWITCHER
|
|
/*
|
|
* gic_send_sgi - send a SGI directly to given CPU interface number
|
|
*
|
|
* cpu_id: the ID for the destination CPU interface
|
|
* irq: the IPI number to send a SGI for
|
|
*/
|
|
void gic_send_sgi(unsigned int cpu_id, unsigned int irq)
|
|
{
|
|
BUG_ON(cpu_id >= NR_GIC_CPU_IF);
|
|
cpu_id = 1 << cpu_id;
|
|
/* this always happens on GIC0 */
|
|
writel_relaxed((cpu_id << 16) | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
|
|
}
|
|
|
|
/*
|
|
* gic_get_cpu_id - get the CPU interface ID for the specified CPU
|
|
*
|
|
* @cpu: the logical CPU number to get the GIC ID for.
|
|
*
|
|
* Return the CPU interface ID for the given logical CPU number,
|
|
* or -1 if the CPU number is too large or the interface ID is
|
|
* unknown (more than one bit set).
|
|
*/
|
|
int gic_get_cpu_id(unsigned int cpu)
|
|
{
|
|
unsigned int cpu_bit;
|
|
|
|
if (cpu >= NR_GIC_CPU_IF)
|
|
return -1;
|
|
cpu_bit = gic_cpu_map[cpu];
|
|
if (cpu_bit & (cpu_bit - 1))
|
|
return -1;
|
|
return __ffs(cpu_bit);
|
|
}
|
|
|
|
/*
|
|
* gic_migrate_target - migrate IRQs to another CPU interface
|
|
*
|
|
* @new_cpu_id: the CPU target ID to migrate IRQs to
|
|
*
|
|
* Migrate all peripheral interrupts with a target matching the current CPU
|
|
* to the interface corresponding to @new_cpu_id. The CPU interface mapping
|
|
* is also updated. Targets to other CPU interfaces are unchanged.
|
|
* This must be called with IRQs locally disabled.
|
|
*/
|
|
void gic_migrate_target(unsigned int new_cpu_id)
|
|
{
|
|
unsigned int cur_cpu_id, gic_irqs, gic_nr = 0;
|
|
void __iomem *dist_base;
|
|
int i, ror_val, cpu = smp_processor_id();
|
|
u32 val, cur_target_mask, active_mask;
|
|
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
|
|
dist_base = gic_data_dist_base(&gic_data[gic_nr]);
|
|
if (!dist_base)
|
|
return;
|
|
gic_irqs = gic_data[gic_nr].gic_irqs;
|
|
|
|
cur_cpu_id = __ffs(gic_cpu_map[cpu]);
|
|
cur_target_mask = 0x01010101 << cur_cpu_id;
|
|
ror_val = (cur_cpu_id - new_cpu_id) & 31;
|
|
|
|
raw_spin_lock(&irq_controller_lock);
|
|
|
|
/* Update the target interface for this logical CPU */
|
|
gic_cpu_map[cpu] = 1 << new_cpu_id;
|
|
|
|
/*
|
|
* Find all the peripheral interrupts targetting the current
|
|
* CPU interface and migrate them to the new CPU interface.
|
|
* We skip DIST_TARGET 0 to 7 as they are read-only.
|
|
*/
|
|
for (i = 8; i < DIV_ROUND_UP(gic_irqs, 4); i++) {
|
|
val = readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
|
|
active_mask = val & cur_target_mask;
|
|
if (active_mask) {
|
|
val &= ~active_mask;
|
|
val |= ror32(active_mask, ror_val);
|
|
writel_relaxed(val, dist_base + GIC_DIST_TARGET + i*4);
|
|
}
|
|
}
|
|
|
|
raw_spin_unlock(&irq_controller_lock);
|
|
|
|
/*
|
|
* Now let's migrate and clear any potential SGIs that might be
|
|
* pending for us (cur_cpu_id). Since GIC_DIST_SGI_PENDING_SET
|
|
* is a banked register, we can only forward the SGI using
|
|
* GIC_DIST_SOFTINT. The original SGI source is lost but Linux
|
|
* doesn't use that information anyway.
|
|
*
|
|
* For the same reason we do not adjust SGI source information
|
|
* for previously sent SGIs by us to other CPUs either.
|
|
*/
|
|
for (i = 0; i < 16; i += 4) {
|
|
int j;
|
|
val = readl_relaxed(dist_base + GIC_DIST_SGI_PENDING_SET + i);
|
|
if (!val)
|
|
continue;
|
|
writel_relaxed(val, dist_base + GIC_DIST_SGI_PENDING_CLEAR + i);
|
|
for (j = i; j < i + 4; j++) {
|
|
if (val & 0xff)
|
|
writel_relaxed((1 << (new_cpu_id + 16)) | j,
|
|
dist_base + GIC_DIST_SOFTINT);
|
|
val >>= 8;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* gic_get_sgir_physaddr - get the physical address for the SGI register
|
|
*
|
|
* REturn the physical address of the SGI register to be used
|
|
* by some early assembly code when the kernel is not yet available.
|
|
*/
|
|
static unsigned long gic_dist_physaddr;
|
|
|
|
unsigned long gic_get_sgir_physaddr(void)
|
|
{
|
|
if (!gic_dist_physaddr)
|
|
return 0;
|
|
return gic_dist_physaddr + GIC_DIST_SOFTINT;
|
|
}
|
|
|
|
void __init gic_init_physaddr(struct device_node *node)
|
|
{
|
|
struct resource res;
|
|
if (of_address_to_resource(node, 0, &res) == 0) {
|
|
gic_dist_physaddr = res.start;
|
|
pr_info("GIC physical location is %#lx\n", gic_dist_physaddr);
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define gic_init_physaddr(node) do { } while (0)
|
|
#endif
|
|
|
|
static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hw)
|
|
{
|
|
struct gic_chip_data *gic = d->host_data;
|
|
|
|
if (hw < 32) {
|
|
irq_set_percpu_devid(irq);
|
|
irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
|
|
handle_percpu_devid_irq, NULL, NULL);
|
|
irq_set_status_flags(irq, IRQ_NOAUTOEN);
|
|
} else {
|
|
irq_domain_set_info(d, irq, hw, &gic->chip, d->host_data,
|
|
handle_fasteoi_irq, NULL, NULL);
|
|
irq_set_probe(irq);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
}
|
|
|
|
static int gic_irq_domain_translate(struct irq_domain *d,
|
|
struct irq_fwspec *fwspec,
|
|
unsigned long *hwirq,
|
|
unsigned int *type)
|
|
{
|
|
if (is_of_node(fwspec->fwnode)) {
|
|
if (fwspec->param_count < 3)
|
|
return -EINVAL;
|
|
|
|
/* Get the interrupt number and add 16 to skip over SGIs */
|
|
*hwirq = fwspec->param[1] + 16;
|
|
|
|
/*
|
|
* For SPIs, we need to add 16 more to get the GIC irq
|
|
* ID number
|
|
*/
|
|
if (!fwspec->param[0])
|
|
*hwirq += 16;
|
|
|
|
*type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK;
|
|
return 0;
|
|
}
|
|
|
|
if (is_fwnode_irqchip(fwspec->fwnode)) {
|
|
if(fwspec->param_count != 2)
|
|
return -EINVAL;
|
|
|
|
*hwirq = fwspec->param[0];
|
|
*type = fwspec->param[1];
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int gic_secondary_init(struct notifier_block *nfb, unsigned long action,
|
|
void *hcpu)
|
|
{
|
|
if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
|
|
gic_cpu_init(&gic_data[0]);
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
/*
|
|
* Notifier for enabling the GIC CPU interface. Set an arbitrarily high
|
|
* priority because the GIC needs to be up before the ARM generic timers.
|
|
*/
|
|
static struct notifier_block gic_cpu_notifier = {
|
|
.notifier_call = gic_secondary_init,
|
|
.priority = 100,
|
|
};
|
|
#endif
|
|
|
|
static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
|
|
unsigned int nr_irqs, void *arg)
|
|
{
|
|
int i, ret;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type = IRQ_TYPE_NONE;
|
|
struct irq_fwspec *fwspec = arg;
|
|
|
|
ret = gic_irq_domain_translate(domain, fwspec, &hwirq, &type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < nr_irqs; i++)
|
|
gic_irq_domain_map(domain, virq + i, hwirq + i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops gic_irq_domain_hierarchy_ops = {
|
|
.translate = gic_irq_domain_translate,
|
|
.alloc = gic_irq_domain_alloc,
|
|
.free = irq_domain_free_irqs_top,
|
|
};
|
|
|
|
static const struct irq_domain_ops gic_irq_domain_ops = {
|
|
.map = gic_irq_domain_map,
|
|
.unmap = gic_irq_domain_unmap,
|
|
};
|
|
|
|
static void __init __gic_init_bases(unsigned int gic_nr, int irq_start,
|
|
void __iomem *dist_base, void __iomem *cpu_base,
|
|
u32 percpu_offset, struct fwnode_handle *handle)
|
|
{
|
|
irq_hw_number_t hwirq_base;
|
|
struct gic_chip_data *gic;
|
|
int gic_irqs, irq_base, i;
|
|
|
|
BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
|
|
|
|
gic_check_cpu_features();
|
|
|
|
gic = &gic_data[gic_nr];
|
|
|
|
/* Initialize irq_chip */
|
|
if (static_key_true(&supports_deactivate) && gic_nr == 0) {
|
|
gic->chip = gic_eoimode1_chip;
|
|
} else {
|
|
gic->chip = gic_chip;
|
|
gic->chip.name = kasprintf(GFP_KERNEL, "GIC-%d", gic_nr);
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
if (gic_nr == 0)
|
|
gic->chip.irq_set_affinity = gic_set_affinity;
|
|
#endif
|
|
|
|
#ifdef CONFIG_GIC_NON_BANKED
|
|
if (percpu_offset) { /* Frankein-GIC without banked registers... */
|
|
unsigned int cpu;
|
|
|
|
gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
|
|
gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
|
|
if (WARN_ON(!gic->dist_base.percpu_base ||
|
|
!gic->cpu_base.percpu_base)) {
|
|
free_percpu(gic->dist_base.percpu_base);
|
|
free_percpu(gic->cpu_base.percpu_base);
|
|
return;
|
|
}
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
u32 mpidr = cpu_logical_map(cpu);
|
|
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
|
|
unsigned long offset = percpu_offset * core_id;
|
|
*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
|
|
*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
|
|
}
|
|
|
|
gic_set_base_accessor(gic, gic_get_percpu_base);
|
|
} else
|
|
#endif
|
|
{ /* Normal, sane GIC... */
|
|
WARN(percpu_offset,
|
|
"GIC_NON_BANKED not enabled, ignoring %08x offset!",
|
|
percpu_offset);
|
|
gic->dist_base.common_base = dist_base;
|
|
gic->cpu_base.common_base = cpu_base;
|
|
gic_set_base_accessor(gic, gic_get_common_base);
|
|
}
|
|
|
|
/*
|
|
* Find out how many interrupts are supported.
|
|
* The GIC only supports up to 1020 interrupt sources.
|
|
*/
|
|
gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
|
|
gic_irqs = (gic_irqs + 1) * 32;
|
|
if (gic_irqs > 1020)
|
|
gic_irqs = 1020;
|
|
gic->gic_irqs = gic_irqs;
|
|
|
|
if (handle) { /* DT/ACPI */
|
|
gic->domain = irq_domain_create_linear(handle, gic_irqs,
|
|
&gic_irq_domain_hierarchy_ops,
|
|
gic);
|
|
} else { /* Legacy support */
|
|
/*
|
|
* For primary GICs, skip over SGIs.
|
|
* For secondary GICs, skip over PPIs, too.
|
|
*/
|
|
if (gic_nr == 0 && (irq_start & 31) > 0) {
|
|
hwirq_base = 16;
|
|
if (irq_start != -1)
|
|
irq_start = (irq_start & ~31) + 16;
|
|
} else {
|
|
hwirq_base = 32;
|
|
}
|
|
|
|
gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
|
|
|
|
irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
|
|
numa_node_id());
|
|
if (IS_ERR_VALUE(irq_base)) {
|
|
WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
|
|
irq_start);
|
|
irq_base = irq_start;
|
|
}
|
|
|
|
gic->domain = irq_domain_add_legacy(NULL, gic_irqs, irq_base,
|
|
hwirq_base, &gic_irq_domain_ops, gic);
|
|
}
|
|
|
|
if (WARN_ON(!gic->domain))
|
|
return;
|
|
|
|
if (gic_nr == 0) {
|
|
/*
|
|
* Initialize the CPU interface map to all CPUs.
|
|
* It will be refined as each CPU probes its ID.
|
|
* This is only necessary for the primary GIC.
|
|
*/
|
|
for (i = 0; i < NR_GIC_CPU_IF; i++)
|
|
gic_cpu_map[i] = 0xff;
|
|
#ifdef CONFIG_SMP
|
|
set_smp_cross_call(gic_raise_softirq);
|
|
register_cpu_notifier(&gic_cpu_notifier);
|
|
#endif
|
|
set_handle_irq(gic_handle_irq);
|
|
if (static_key_true(&supports_deactivate))
|
|
pr_info("GIC: Using split EOI/Deactivate mode\n");
|
|
}
|
|
|
|
gic_dist_init(gic);
|
|
gic_cpu_init(gic);
|
|
gic_pm_init(gic);
|
|
}
|
|
|
|
void __init gic_init(unsigned int gic_nr, int irq_start,
|
|
void __iomem *dist_base, void __iomem *cpu_base)
|
|
{
|
|
/*
|
|
* Non-DT/ACPI systems won't run a hypervisor, so let's not
|
|
* bother with these...
|
|
*/
|
|
static_key_slow_dec(&supports_deactivate);
|
|
__gic_init_bases(gic_nr, irq_start, dist_base, cpu_base, 0, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int gic_cnt __initdata;
|
|
|
|
static bool gic_check_eoimode(struct device_node *node, void __iomem **base)
|
|
{
|
|
struct resource cpuif_res;
|
|
|
|
of_address_to_resource(node, 1, &cpuif_res);
|
|
|
|
if (!is_hyp_mode_available())
|
|
return false;
|
|
if (resource_size(&cpuif_res) < SZ_8K)
|
|
return false;
|
|
if (resource_size(&cpuif_res) == SZ_128K) {
|
|
u32 val_low, val_high;
|
|
|
|
/*
|
|
* Verify that we have the first 4kB of a GIC400
|
|
* aliased over the first 64kB by checking the
|
|
* GICC_IIDR register on both ends.
|
|
*/
|
|
val_low = readl_relaxed(*base + GIC_CPU_IDENT);
|
|
val_high = readl_relaxed(*base + GIC_CPU_IDENT + 0xf000);
|
|
if ((val_low & 0xffff0fff) != 0x0202043B ||
|
|
val_low != val_high)
|
|
return false;
|
|
|
|
/*
|
|
* Move the base up by 60kB, so that we have a 8kB
|
|
* contiguous region, which allows us to use GICC_DIR
|
|
* at its normal offset. Please pass me that bucket.
|
|
*/
|
|
*base += 0xf000;
|
|
cpuif_res.start += 0xf000;
|
|
pr_warn("GIC: Adjusting CPU interface base to %pa",
|
|
&cpuif_res.start);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
int __init
|
|
gic_of_init(struct device_node *node, struct device_node *parent)
|
|
{
|
|
void __iomem *cpu_base;
|
|
void __iomem *dist_base;
|
|
u32 percpu_offset;
|
|
int irq;
|
|
|
|
if (WARN_ON(!node))
|
|
return -ENODEV;
|
|
|
|
dist_base = of_iomap(node, 0);
|
|
WARN(!dist_base, "unable to map gic dist registers\n");
|
|
|
|
cpu_base = of_iomap(node, 1);
|
|
WARN(!cpu_base, "unable to map gic cpu registers\n");
|
|
|
|
/*
|
|
* Disable split EOI/Deactivate if either HYP is not available
|
|
* or the CPU interface is too small.
|
|
*/
|
|
if (gic_cnt == 0 && !gic_check_eoimode(node, &cpu_base))
|
|
static_key_slow_dec(&supports_deactivate);
|
|
|
|
if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
|
|
percpu_offset = 0;
|
|
|
|
__gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset,
|
|
&node->fwnode);
|
|
if (!gic_cnt)
|
|
gic_init_physaddr(node);
|
|
|
|
if (parent) {
|
|
irq = irq_of_parse_and_map(node, 0);
|
|
gic_cascade_irq(gic_cnt, irq);
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
|
|
gicv2m_init(&node->fwnode, gic_data[gic_cnt].domain);
|
|
|
|
gic_cnt++;
|
|
return 0;
|
|
}
|
|
IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init);
|
|
IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
|
|
IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
|
|
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
|
|
IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static phys_addr_t cpu_phy_base __initdata;
|
|
|
|
static int __init
|
|
gic_acpi_parse_madt_cpu(struct acpi_subtable_header *header,
|
|
const unsigned long end)
|
|
{
|
|
struct acpi_madt_generic_interrupt *processor;
|
|
phys_addr_t gic_cpu_base;
|
|
static int cpu_base_assigned;
|
|
|
|
processor = (struct acpi_madt_generic_interrupt *)header;
|
|
|
|
if (BAD_MADT_GICC_ENTRY(processor, end))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* There is no support for non-banked GICv1/2 register in ACPI spec.
|
|
* All CPU interface addresses have to be the same.
|
|
*/
|
|
gic_cpu_base = processor->base_address;
|
|
if (cpu_base_assigned && gic_cpu_base != cpu_phy_base)
|
|
return -EINVAL;
|
|
|
|
cpu_phy_base = gic_cpu_base;
|
|
cpu_base_assigned = 1;
|
|
return 0;
|
|
}
|
|
|
|
/* The things you have to do to just *count* something... */
|
|
static int __init acpi_dummy_func(struct acpi_subtable_header *header,
|
|
const unsigned long end)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static bool __init acpi_gic_redist_is_present(void)
|
|
{
|
|
return acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR,
|
|
acpi_dummy_func, 0) > 0;
|
|
}
|
|
|
|
static bool __init gic_validate_dist(struct acpi_subtable_header *header,
|
|
struct acpi_probe_entry *ape)
|
|
{
|
|
struct acpi_madt_generic_distributor *dist;
|
|
dist = (struct acpi_madt_generic_distributor *)header;
|
|
|
|
return (dist->version == ape->driver_data &&
|
|
(dist->version != ACPI_MADT_GIC_VERSION_NONE ||
|
|
!acpi_gic_redist_is_present()));
|
|
}
|
|
|
|
#define ACPI_GICV2_DIST_MEM_SIZE (SZ_4K)
|
|
#define ACPI_GIC_CPU_IF_MEM_SIZE (SZ_8K)
|
|
|
|
static int __init gic_v2_acpi_init(struct acpi_subtable_header *header,
|
|
const unsigned long end)
|
|
{
|
|
struct acpi_madt_generic_distributor *dist;
|
|
void __iomem *cpu_base, *dist_base;
|
|
struct fwnode_handle *domain_handle;
|
|
int count;
|
|
|
|
/* Collect CPU base addresses */
|
|
count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
|
|
gic_acpi_parse_madt_cpu, 0);
|
|
if (count <= 0) {
|
|
pr_err("No valid GICC entries exist\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
cpu_base = ioremap(cpu_phy_base, ACPI_GIC_CPU_IF_MEM_SIZE);
|
|
if (!cpu_base) {
|
|
pr_err("Unable to map GICC registers\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dist = (struct acpi_madt_generic_distributor *)header;
|
|
dist_base = ioremap(dist->base_address, ACPI_GICV2_DIST_MEM_SIZE);
|
|
if (!dist_base) {
|
|
pr_err("Unable to map GICD registers\n");
|
|
iounmap(cpu_base);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* Disable split EOI/Deactivate if HYP is not available. ACPI
|
|
* guarantees that we'll always have a GICv2, so the CPU
|
|
* interface will always be the right size.
|
|
*/
|
|
if (!is_hyp_mode_available())
|
|
static_key_slow_dec(&supports_deactivate);
|
|
|
|
/*
|
|
* Initialize GIC instance zero (no multi-GIC support).
|
|
*/
|
|
domain_handle = irq_domain_alloc_fwnode(dist_base);
|
|
if (!domain_handle) {
|
|
pr_err("Unable to allocate domain handle\n");
|
|
iounmap(cpu_base);
|
|
iounmap(dist_base);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
__gic_init_bases(0, -1, dist_base, cpu_base, 0, domain_handle);
|
|
|
|
acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
|
|
|
|
if (IS_ENABLED(CONFIG_ARM_GIC_V2M))
|
|
gicv2m_init(NULL, gic_data[0].domain);
|
|
|
|
return 0;
|
|
}
|
|
IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
|
|
gic_validate_dist, ACPI_MADT_GIC_VERSION_V2,
|
|
gic_v2_acpi_init);
|
|
IRQCHIP_ACPI_DECLARE(gic_v2_maybe, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR,
|
|
gic_validate_dist, ACPI_MADT_GIC_VERSION_NONE,
|
|
gic_v2_acpi_init);
|
|
#endif
|