linux_dsm_epyc7002/arch/xtensa/platforms/s6105/device.c
Thomas Gleixner 610e1756ea xtensa: Convert genirq namespace
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-24 20:35:58 +01:00

162 lines
3.3 KiB
C

/*
* s6105 platform devices
*
* Copyright (c) 2009 emlix GmbH
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <variant/hardware.h>
#include <variant/dmac.h>
#include <platform/gpio.h>
#define GPIO3_INTNUM 3
#define UART_INTNUM 4
#define GMAC_INTNUM 5
static const signed char gpio3_irq_mappings[] = {
S6_INTC_GPIO(3),
-1
};
static const signed char uart_irq_mappings[] = {
S6_INTC_UART(0),
S6_INTC_UART(1),
-1,
};
static const signed char gmac_irq_mappings[] = {
S6_INTC_GMAC_STAT,
S6_INTC_GMAC_ERR,
S6_INTC_DMA_HOSTTERMCNT(0),
S6_INTC_DMA_HOSTTERMCNT(1),
-1
};
const signed char *platform_irq_mappings[NR_IRQS] = {
[GPIO3_INTNUM] = gpio3_irq_mappings,
[UART_INTNUM] = uart_irq_mappings,
[GMAC_INTNUM] = gmac_irq_mappings,
};
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)S6_REG_UART + 0x0000,
.mapbase = S6_REG_UART + 0x0000,
.irq = UART_INTNUM,
.uartclk = S6_SCLK,
.regshift = 2,
.iotype = SERIAL_IO_MEM,
.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST,
},
{
.membase = (void *)S6_REG_UART + 0x1000,
.mapbase = S6_REG_UART + 0x1000,
.irq = UART_INTNUM,
.uartclk = S6_SCLK,
.regshift = 2,
.iotype = SERIAL_IO_MEM,
.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST,
},
{ },
};
static struct resource s6_gmac_resource[] = {
{
.name = "mem",
.start = (resource_size_t)S6_REG_GMAC,
.end = (resource_size_t)S6_REG_GMAC + 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "dma",
.start = (resource_size_t)
DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX),
.end = (resource_size_t)
DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX) + 0x100 - 1,
.flags = IORESOURCE_DMA,
},
{
.name = "dma",
.start = (resource_size_t)
DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX),
.end = (resource_size_t)
DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX) + 0x100 - 1,
.flags = IORESOURCE_DMA,
},
{
.name = "io",
.start = (resource_size_t)S6_MEM_GMAC,
.end = (resource_size_t)S6_MEM_GMAC + 0x2000000 - 1,
.flags = IORESOURCE_IO,
},
{
.name = "irq",
.start = (resource_size_t)GMAC_INTNUM,
.flags = IORESOURCE_IRQ,
},
{
.name = "irq",
.start = (resource_size_t)PHY_POLL,
.flags = IORESOURCE_IRQ,
},
};
static int __init prepare_phy_irq(int pin)
{
int irq;
if (gpio_request(pin, "s6gmac_phy") < 0)
goto fail;
if (gpio_direction_input(pin) < 0)
goto free;
irq = gpio_to_irq(pin);
if (irq < 0)
goto free;
if (irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW) < 0)
goto free;
return irq;
free:
gpio_free(pin);
fail:
return PHY_POLL;
}
static struct platform_device platform_devices[] = {
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
},
{
.name = "s6gmac",
.id = 0,
.resource = s6_gmac_resource,
.num_resources = ARRAY_SIZE(s6_gmac_resource),
},
{
I2C_BOARD_INFO("m41t62", S6I2C_ADDR_M41T62),
},
};
static int __init device_init(void)
{
int i;
s6_gmac_resource[5].start = prepare_phy_irq(GPIO_PHY_IRQ);
for (i = 0; i < ARRAY_SIZE(platform_devices); i++)
platform_device_register(&platform_devices[i]);
return 0;
}
arch_initcall_sync(device_init);