mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
2d24b532f9
These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
93 lines
2.5 KiB
C
93 lines
2.5 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* 525x.c -- platform support for ColdFire 525x based boards
|
|
*
|
|
* Copyright (C) 2012, Steven King <sfking@fdwdc.com>
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfclk.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
DEFINE_CLK(pll, "pll.0", MCF_CLK);
|
|
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
|
|
|
|
struct clk *mcf_clks[] = {
|
|
&clk_pll,
|
|
&clk_sys,
|
|
&clk_mcftmr0,
|
|
&clk_mcftmr1,
|
|
&clk_mcfuart0,
|
|
&clk_mcfuart1,
|
|
&clk_mcfqspi0,
|
|
&clk_mcfi2c0,
|
|
&clk_mcfi2c1,
|
|
NULL
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m525x_qspi_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
/* set the GPIO function for the qspi cs gpios */
|
|
/* FIXME: replace with pinmux/pinctl support */
|
|
u32 f = readl(MCFSIM2_GPIOFUNC);
|
|
f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0);
|
|
writel(f, MCFSIM2_GPIOFUNC);
|
|
|
|
/* QSPI irq setup */
|
|
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
|
|
MCFSIM_QSPIICR);
|
|
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
|
|
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
|
|
}
|
|
|
|
static void __init m525x_i2c_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_I2C_IMX)
|
|
u32 r;
|
|
|
|
/* first I2C controller uses regular irq setup */
|
|
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
|
|
MCFSIM_I2CICR);
|
|
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
|
|
|
|
/* second I2C controller is completely different */
|
|
r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
|
|
r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
|
|
r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
|
|
writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
|
|
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
mach_sched_init = hw_timer_init;
|
|
|
|
m525x_qspi_init();
|
|
m525x_i2c_init();
|
|
}
|
|
|
|
/***************************************************************************/
|