linux_dsm_epyc7002/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
Rob Herring efdbd7345f dt-bindings: consolidate display related bindings
This is a quite large renaming to consolidate display related bindings
into a single "display" directory from various scattered locations of
video, drm, gpu, fb, mipi, and panel. The prior location was somewhat
based on the Linux driver location, but bindings should be independent
of that.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
2015-10-22 09:21:21 -05:00

56 lines
1.5 KiB
Plaintext

Freescale imx21 Framebuffer
This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
Required properties:
- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
- reg : Should contain 1 register ranges(address and length)
- interrupts : One interrupt of the fb dev
Required nodes:
- display: Phandle to a display node as described in
Documentation/devicetree/bindings/display/display-timing.txt
Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
Optional properties:
- lcd-supply: Regulator for LCD supply voltage.
- fsl,dmacr: DMA Control Register value. This is optional. By default, the
register is not modified as recommended by the datasheet.
- fsl,lpccr: Contrast Control Register value. This property provides the
default value for the contrast control register.
If that property is omitted, the register is zeroed.
- fsl,lscr1: LCDC Sharp Configuration Register value.
Example:
imxfb: fb@10021000 {
compatible = "fsl,imx21-fb";
interrupts = <61>;
reg = <0x10021000 0x1000>;
display = <&display0>;
};
...
display0: display0 {
model = "Primeview-PD050VL1";
native-mode = <&timing_disp0>;
bits-per-pixel = <16>;
fsl,pcr = <0xf0c88080>; /* non-standard but required */
display-timings {
timing_disp0: 640x480 {
hactive = <640>;
vactive = <480>;
hback-porch = <112>;
hfront-porch = <36>;
hsync-len = <32>;
vback-porch = <33>;
vfront-porch = <33>;
vsync-len = <2>;
clock-frequency = <25000000>;
};
};
};