linux_dsm_epyc7002/drivers/bluetooth/dtl1_cs.c
Dominik Brodowski 37979e1546 pcmcia: simplify IntType
IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO
(all other drivers). As this flags seems to relate to ioport access, make
it conditional to the driver having requested IO port access. There are two
drivers which do not request IO ports, but did set INT_MEMORY_AND_IO:
ray_cs and b43. For those, we consistently only set INT_MEMORY in future.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29 17:20:22 +02:00

679 lines
14 KiB
C

/*
*
* A driver for Nokia Connectivity Card DTL-1 devices
*
* Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* The initial developer of the original code is David A. Hinds
* <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/moduleparam.h>
#include <linux/skbuff.h>
#include <linux/string.h>
#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <linux/bitops.h>
#include <asm/system.h>
#include <asm/io.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
/* ======================== Module parameters ======================== */
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1");
MODULE_LICENSE("GPL");
/* ======================== Local structures ======================== */
typedef struct dtl1_info_t {
struct pcmcia_device *p_dev;
struct hci_dev *hdev;
spinlock_t lock; /* For serializing operations */
unsigned long flowmask; /* HCI flow mask */
int ri_latch;
struct sk_buff_head txq;
unsigned long tx_state;
unsigned long rx_state;
unsigned long rx_count;
struct sk_buff *rx_skb;
} dtl1_info_t;
static int dtl1_config(struct pcmcia_device *link);
static void dtl1_release(struct pcmcia_device *link);
static void dtl1_detach(struct pcmcia_device *p_dev);
/* Transmit states */
#define XMIT_SENDING 1
#define XMIT_WAKEUP 2
#define XMIT_WAITING 8
/* Receiver States */
#define RECV_WAIT_NSH 0
#define RECV_WAIT_DATA 1
typedef struct {
u8 type;
u8 zero;
u16 len;
} __packed nsh_t; /* Nokia Specific Header */
#define NSHL 4 /* Nokia Specific Header Length */
/* ======================== Interrupt handling ======================== */
static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
{
int actual = 0;
/* Tx FIFO should be empty */
if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
return 0;
/* Fill FIFO with current frame */
while ((fifo_size-- > 0) && (actual < len)) {
/* Transmit next byte */
outb(buf[actual], iobase + UART_TX);
actual++;
}
return actual;
}
static void dtl1_write_wakeup(dtl1_info_t *info)
{
if (!info) {
BT_ERR("Unknown device");
return;
}
if (test_bit(XMIT_WAITING, &(info->tx_state))) {
set_bit(XMIT_WAKEUP, &(info->tx_state));
return;
}
if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
set_bit(XMIT_WAKEUP, &(info->tx_state));
return;
}
do {
register unsigned int iobase = info->p_dev->resource[0]->start;
register struct sk_buff *skb;
register int len;
clear_bit(XMIT_WAKEUP, &(info->tx_state));
if (!pcmcia_dev_present(info->p_dev))
return;
if (!(skb = skb_dequeue(&(info->txq))))
break;
/* Send frame */
len = dtl1_write(iobase, 32, skb->data, skb->len);
if (len == skb->len) {
set_bit(XMIT_WAITING, &(info->tx_state));
kfree_skb(skb);
} else {
skb_pull(skb, len);
skb_queue_head(&(info->txq), skb);
}
info->hdev->stat.byte_tx += len;
} while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
clear_bit(XMIT_SENDING, &(info->tx_state));
}
static void dtl1_control(dtl1_info_t *info, struct sk_buff *skb)
{
u8 flowmask = *(u8 *)skb->data;
int i;
printk(KERN_INFO "Bluetooth: Nokia control data =");
for (i = 0; i < skb->len; i++) {
printk(" %02x", skb->data[i]);
}
printk("\n");
/* transition to active state */
if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) {
clear_bit(XMIT_WAITING, &(info->tx_state));
dtl1_write_wakeup(info);
}
info->flowmask = flowmask;
kfree_skb(skb);
}
static void dtl1_receive(dtl1_info_t *info)
{
unsigned int iobase;
nsh_t *nsh;
int boguscount = 0;
if (!info) {
BT_ERR("Unknown device");
return;
}
iobase = info->p_dev->resource[0]->start;
do {
info->hdev->stat.byte_rx++;
/* Allocate packet */
if (info->rx_skb == NULL)
if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
BT_ERR("Can't allocate mem for new packet");
info->rx_state = RECV_WAIT_NSH;
info->rx_count = NSHL;
return;
}
*skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
nsh = (nsh_t *)info->rx_skb->data;
info->rx_count--;
if (info->rx_count == 0) {
switch (info->rx_state) {
case RECV_WAIT_NSH:
info->rx_state = RECV_WAIT_DATA;
info->rx_count = nsh->len + (nsh->len & 0x0001);
break;
case RECV_WAIT_DATA:
bt_cb(info->rx_skb)->pkt_type = nsh->type;
/* remove PAD byte if it exists */
if (nsh->len & 0x0001) {
info->rx_skb->tail--;
info->rx_skb->len--;
}
/* remove NSH */
skb_pull(info->rx_skb, NSHL);
switch (bt_cb(info->rx_skb)->pkt_type) {
case 0x80:
/* control data for the Nokia Card */
dtl1_control(info, info->rx_skb);
break;
case 0x82:
case 0x83:
case 0x84:
/* send frame to the HCI layer */
info->rx_skb->dev = (void *) info->hdev;
bt_cb(info->rx_skb)->pkt_type &= 0x0f;
hci_recv_frame(info->rx_skb);
break;
default:
/* unknown packet */
BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
kfree_skb(info->rx_skb);
break;
}
info->rx_state = RECV_WAIT_NSH;
info->rx_count = NSHL;
info->rx_skb = NULL;
break;
}
}
/* Make sure we don't stay here too long */
if (boguscount++ > 32)
break;
} while (inb(iobase + UART_LSR) & UART_LSR_DR);
}
static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
{
dtl1_info_t *info = dev_inst;
unsigned int iobase;
unsigned char msr;
int boguscount = 0;
int iir, lsr;
irqreturn_t r = IRQ_NONE;
if (!info || !info->hdev)
/* our irq handler is shared */
return IRQ_NONE;
iobase = info->p_dev->resource[0]->start;
spin_lock(&(info->lock));
iir = inb(iobase + UART_IIR) & UART_IIR_ID;
while (iir) {
r = IRQ_HANDLED;
/* Clear interrupt */
lsr = inb(iobase + UART_LSR);
switch (iir) {
case UART_IIR_RLSI:
BT_ERR("RLSI");
break;
case UART_IIR_RDI:
/* Receive interrupt */
dtl1_receive(info);
break;
case UART_IIR_THRI:
if (lsr & UART_LSR_THRE) {
/* Transmitter ready for data */
dtl1_write_wakeup(info);
}
break;
default:
BT_ERR("Unhandled IIR=%#x", iir);
break;
}
/* Make sure we don't stay here too long */
if (boguscount++ > 100)
break;
iir = inb(iobase + UART_IIR) & UART_IIR_ID;
}
msr = inb(iobase + UART_MSR);
if (info->ri_latch ^ (msr & UART_MSR_RI)) {
info->ri_latch = msr & UART_MSR_RI;
clear_bit(XMIT_WAITING, &(info->tx_state));
dtl1_write_wakeup(info);
r = IRQ_HANDLED;
}
spin_unlock(&(info->lock));
return r;
}
/* ======================== HCI interface ======================== */
static int dtl1_hci_open(struct hci_dev *hdev)
{
set_bit(HCI_RUNNING, &(hdev->flags));
return 0;
}
static int dtl1_hci_flush(struct hci_dev *hdev)
{
dtl1_info_t *info = (dtl1_info_t *)(hdev->driver_data);
/* Drop TX queue */
skb_queue_purge(&(info->txq));
return 0;
}
static int dtl1_hci_close(struct hci_dev *hdev)
{
if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
return 0;
dtl1_hci_flush(hdev);
return 0;
}
static int dtl1_hci_send_frame(struct sk_buff *skb)
{
dtl1_info_t *info;
struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
struct sk_buff *s;
nsh_t nsh;
if (!hdev) {
BT_ERR("Frame for unknown HCI device (hdev=NULL)");
return -ENODEV;
}
info = (dtl1_info_t *)(hdev->driver_data);
switch (bt_cb(skb)->pkt_type) {
case HCI_COMMAND_PKT:
hdev->stat.cmd_tx++;
nsh.type = 0x81;
break;
case HCI_ACLDATA_PKT:
hdev->stat.acl_tx++;
nsh.type = 0x82;
break;
case HCI_SCODATA_PKT:
hdev->stat.sco_tx++;
nsh.type = 0x83;
break;
default:
return -EILSEQ;
};
nsh.zero = 0;
nsh.len = skb->len;
s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC);
if (!s)
return -ENOMEM;
skb_reserve(s, NSHL);
skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len);
if (skb->len & 0x0001)
*skb_put(s, 1) = 0; /* PAD */
/* Prepend skb with Nokia frame header and queue */
memcpy(skb_push(s, NSHL), &nsh, NSHL);
skb_queue_tail(&(info->txq), s);
dtl1_write_wakeup(info);
kfree_skb(skb);
return 0;
}
static void dtl1_hci_destruct(struct hci_dev *hdev)
{
}
static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
}
/* ======================== Card services HCI interaction ======================== */
static int dtl1_open(dtl1_info_t *info)
{
unsigned long flags;
unsigned int iobase = info->p_dev->resource[0]->start;
struct hci_dev *hdev;
spin_lock_init(&(info->lock));
skb_queue_head_init(&(info->txq));
info->rx_state = RECV_WAIT_NSH;
info->rx_count = NSHL;
info->rx_skb = NULL;
set_bit(XMIT_WAITING, &(info->tx_state));
/* Initialize HCI device */
hdev = hci_alloc_dev();
if (!hdev) {
BT_ERR("Can't allocate HCI device");
return -ENOMEM;
}
info->hdev = hdev;
hdev->bus = HCI_PCCARD;
hdev->driver_data = info;
SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
hdev->open = dtl1_hci_open;
hdev->close = dtl1_hci_close;
hdev->flush = dtl1_hci_flush;
hdev->send = dtl1_hci_send_frame;
hdev->destruct = dtl1_hci_destruct;
hdev->ioctl = dtl1_hci_ioctl;
hdev->owner = THIS_MODULE;
spin_lock_irqsave(&(info->lock), flags);
/* Reset UART */
outb(0, iobase + UART_MCR);
/* Turn off interrupts */
outb(0, iobase + UART_IER);
/* Initialize UART */
outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR)
& UART_MSR_RI;
/* Turn on interrupts */
outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
spin_unlock_irqrestore(&(info->lock), flags);
/* Timeout before it is safe to send the first HCI packet */
msleep(2000);
/* Register HCI device */
if (hci_register_dev(hdev) < 0) {
BT_ERR("Can't register HCI device");
info->hdev = NULL;
hci_free_dev(hdev);
return -ENODEV;
}
return 0;
}
static int dtl1_close(dtl1_info_t *info)
{
unsigned long flags;
unsigned int iobase = info->p_dev->resource[0]->start;
struct hci_dev *hdev = info->hdev;
if (!hdev)
return -ENODEV;
dtl1_hci_close(hdev);
spin_lock_irqsave(&(info->lock), flags);
/* Reset UART */
outb(0, iobase + UART_MCR);
/* Turn off interrupts */
outb(0, iobase + UART_IER);
spin_unlock_irqrestore(&(info->lock), flags);
if (hci_unregister_dev(hdev) < 0)
BT_ERR("Can't unregister HCI device %s", hdev->name);
hci_free_dev(hdev);
return 0;
}
static int dtl1_probe(struct pcmcia_device *link)
{
dtl1_info_t *info;
/* Create new info device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->p_dev = link;
link->priv = info;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
return dtl1_config(link);
}
static void dtl1_detach(struct pcmcia_device *link)
{
dtl1_info_t *info = link->priv;
dtl1_release(link);
kfree(info);
}
static int dtl1_confcheck(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
cistpl_cftable_entry_t *dflt,
unsigned int vcc,
void *priv_data)
{
if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8))
return -ENODEV;
p_dev->resource[0]->start = cf->io.win[0].base;
p_dev->resource[0]->end = cf->io.win[0].len; /*yo */
p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
return pcmcia_request_io(p_dev);
}
static int dtl1_config(struct pcmcia_device *link)
{
dtl1_info_t *info = link->priv;
int i;
/* Look for a generic full-sized window */
link->resource[0]->end = 8;
if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
goto failed;
i = pcmcia_request_irq(link, dtl1_interrupt);
if (i != 0)
goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
goto failed;
if (dtl1_open(info) != 0)
goto failed;
return 0;
failed:
dtl1_release(link);
return -ENODEV;
}
static void dtl1_release(struct pcmcia_device *link)
{
dtl1_info_t *info = link->priv;
dtl1_close(info);
pcmcia_disable_device(link);
}
static struct pcmcia_device_id dtl1_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d),
PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82),
PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863),
PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, dtl1_ids);
static struct pcmcia_driver dtl1_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "dtl1_cs",
},
.probe = dtl1_probe,
.remove = dtl1_detach,
.id_table = dtl1_ids,
};
static int __init init_dtl1_cs(void)
{
return pcmcia_register_driver(&dtl1_driver);
}
static void __exit exit_dtl1_cs(void)
{
pcmcia_unregister_driver(&dtl1_driver);
}
module_init(init_dtl1_cs);
module_exit(exit_dtl1_cs);