linux_dsm_epyc7002/arch/arm/boot/dts
Mugunthan V N 36958598b7 ARM: dts: dra72-evm: remove cpsw gpio hogging and add mode-gpios
With the current implementation of GPIO hogging and with
gpio-pcf857x is built as module, ethernet doesn't work on boot
and doesn't throw any error/warning to user. Ethernet becomes
operational when inserting gpio-pcf857x module, even this time
there is no error/warning logs to user that ethernet is
operational.

When using with NFS rootfs and gpio-pcf857x as module, board
doesn't boot as it doesn't get any ip address and doesn't throw
any error/warning. To over come this, now cpsw driver tries to
get mode-gpios. When gpio-pcf857x is built as module it will
throw error, so that user can decide either to built in
gpio-pcf857x to continue with nfs boot or choose alternate rootfs
filesystem like sd/ramdisk.

When using mmc/ramdisk as root fs, cpsw will probe defer and
re-probes again when gpio-pcf857x module is inserted and ethernet
becomes operational.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-20 09:16:21 -07:00
..
include
aks-cdu.dts
alphascale-asm9260-devkit.dts ARM: dts: add DT for Alphascale ASM9260 SoC 2015-01-19 16:29:45 -08:00
alphascale-asm9260.dtsi ARM: dts: add DT for Alphascale ASM9260 SoC 2015-01-19 16:29:45 -08:00
alpine-db.dts ARM: dts: Alpine platform devicetree 2015-03-16 15:34:53 +01:00
alpine.dtsi ARM: dts: alpine: add internal pci 2015-04-14 01:16:13 +02:00
am33xx-clocks.dtsi ARM: SoC late changes for v4.1 2015-04-22 09:24:55 -07:00
am33xx.dtsi Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2015-09-03 08:08:17 -07:00
am35xx-clocks.dtsi ARM: dts: AM35xx: fix system control module clocks 2015-06-01 10:29:35 -07:00
am43x-epos-evm.dts ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:04 -07:00
am43xx-clocks.dtsi ARM: dts: AM437X: add dpll_clksel_mac_clk node 2015-07-31 12:13:18 +03:00
am57xx-beagle-x15.dts ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:12 -07:00
am335x-baltos-ir5221.dts ARM: dts: add DTS for Baltos IR5221 2015-05-20 11:21:24 -07:00
am335x-base0033.dts
am335x-bone-common.dtsi ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:47:00 -07:00
am335x-bone.dts ARM: dts: am335x-bone-common: enable aes and sham 2015-03-06 08:56:01 -08:00
am335x-boneblack.dts ARM: dts: am335x-boneblack: Use new binding for HDMI 2015-07-14 04:15:10 -07:00
am335x-bonegreen.dts ARM: dts: Add am335x-bonegreen 2015-10-12 15:00:37 -07:00
am335x-chiliboard.dts ARM: dts: am335x: Add Chiliboard DTS 2015-03-16 13:48:06 -07:00
am335x-chilisom.dtsi ARM: dts: am335x: Add DTS for ChiliSOM module 2015-03-16 13:42:10 -07:00
am335x-evm.dts ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:47:00 -07:00
am335x-evmsk.dts ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:47:00 -07:00
am335x-igep0033.dtsi
am335x-lxm.dts ARM: dts: am335x-lxm: Use rmii-clock-ext 2015-03-06 09:02:41 -08:00
am335x-nano.dts ARM: dts: Update Nanobone dts file 2015-03-19 10:59:28 -07:00
am335x-pepper.dts ARM: dts: Correct audio input route & set mic bias for am335x-pepper 2015-07-15 03:03:01 -07:00
am335x-phycore-som.dtsi ARM: dts: am335x-wega: Clean up regulators 2015-10-12 15:00:37 -07:00
am335x-sl50.dts ARM: dts: am335x-sl50: Add Toby-Churchill SL50 board support. 2015-05-28 09:49:50 -07:00
am335x-wega-rdk.dts ARM: dts: Add phyBOARD-WEGA-AM335x rdk 2015-07-21 03:58:26 -07:00
am335x-wega.dtsi ARM: dts: am335x-wega: Clean up regulators 2015-10-12 15:00:37 -07:00
am437x-gp-evm.dts ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:04 -07:00
am437x-idk-evm.dts ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:04 -07:00
am437x-sk-evm.dts ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:04 -07:00
am3517_mt_ventoux.dts
am3517-craneboard.dts
am3517-evm.dts
am3517.dtsi ARM: dts: add core2 padconf region for am3517 2015-05-20 10:10:43 -07:00
am4372.dtsi ARM: dts: AM437x: Add the internal and external clock nodes for rtc 2015-09-05 19:37:20 +02:00
animeo_ip.dts
arm-realview-pb1176.dts ARM: dts: update syscons to use simple-mfd 2015-05-11 08:55:03 +02:00
armada-38x.dtsi ARM: mvebu: use DT properties to fine-tune the L2 configuration 2015-07-09 14:25:28 +02:00
armada-39x.dtsi ARM: mvebu: use DT properties to fine-tune the L2 configuration 2015-07-09 14:25:28 +02:00
armada-370-db.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-370-dlink-dns327l.dts ARM: mvebu: dts: Add dts file for DLink DNS-327L 2015-05-27 12:00:34 +02:00
armada-370-mirabox.dts ARM: mvebu: use stdout-path in all armada-*.dts 2015-03-04 15:02:28 +01:00
armada-370-netgear-rn102.dts ARM: mvebu: use stdout-path in all armada-*.dts 2015-03-04 15:02:28 +01:00
armada-370-netgear-rn104.dts ARM: mvebu: use stdout-path in all armada-*.dts 2015-03-04 15:02:28 +01:00
armada-370-rd.dts ARM: mvebu: use stdout-path in all armada-*.dts 2015-03-04 15:02:28 +01:00
armada-370-synology-ds213j.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-370-xp.dtsi Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-07-01 14:58:07 -07:00
armada-370.dtsi Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-07-01 14:58:07 -07:00
armada-375-db.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-375.dtsi ARM: mvebu: use DT properties to fine-tune the L2 configuration 2015-07-09 14:25:28 +02:00
armada-380.dtsi ARM: mvebu: armada-380: Relicense the device tree under GPLv2+/X11 2015-01-26 19:28:12 -06:00
armada-385-db-ap.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-385-linksys-caiman.dts ARM: mvebu: add support for the new Armada 385 based Linksys boards 2015-05-25 16:42:03 +02:00
armada-385-linksys-cobra.dts ARM: mvebu: add support for the new Armada 385 based Linksys boards 2015-05-25 16:42:03 +02:00
armada-385-linksys.dtsi ARM: mvebu: add support for the new Armada 385 based Linksys boards 2015-05-25 16:42:03 +02:00
armada-385.dtsi ARM: mvebu: armada-385: Relicense the device tree under GPLv2+/X11 2015-01-26 19:28:12 -06:00
armada-388-db.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-388-gp.dts ARM: mvebu: update EEPROM description of Armada 388 GP 2015-07-09 15:28:08 +02:00
armada-388-rd.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-388.dtsi ARM: mvebu: Add Device Tree description of the Armada 388 SoC 2015-01-09 09:16:05 -06:00
armada-390.dtsi ARM: mvebu: add Device Tree files for Armada 39x SoC and board 2015-03-04 15:42:34 +01:00
armada-398-db.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-398.dtsi ARM: mvebu: add Device Tree files for Armada 39x SoC and board 2015-03-04 15:42:34 +01:00
armada-xp-axpwifiap.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-xp-db.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-xp-gp.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-xp-lenovo-ix4-300d.dts ARM: mvebu: use stdout-path in all armada-*.dts 2015-03-04 15:02:28 +01:00
armada-xp-linksys-mamba.dts ARM: mvebu: armada-xp-linksys-mamba: Disable internal RTC 2015-05-28 11:13:44 +02:00
armada-xp-matrix.dts ARM: mvebu: use stdout-path in all armada-*.dts 2015-03-04 15:02:28 +01:00
armada-xp-mv78230.dtsi ARM: mvebu: armada-xp-mv78230: Relicense the device tree under GPLv2+/X11 2015-01-26 19:28:13 -06:00
armada-xp-mv78260.dtsi ARM: mvebu: update Ethernet compatible string for Armada XP 2015-06-30 09:37:09 -07:00
armada-xp-mv78460.dtsi ARM: mvebu: update Ethernet compatible string for Armada XP 2015-06-30 09:37:09 -07:00
armada-xp-netgear-rn2120.dts ARM: mvebu: use stdout-path in all armada-*.dts 2015-03-04 15:02:28 +01:00
armada-xp-openblocks-ax3-4.dts ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTC 2015-04-27 09:27:18 +02:00
armada-xp-synology-ds414.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-xp.dtsi ARM: SoC: late fixes and dependencies 2015-07-02 14:40:49 -07:00
armv7-m.dtsi ARM: dts: Add ARM System timer as clocksource in armv7m 2015-05-15 22:16:48 +02:00
at91-ariag25.dts
at91-ariettag25.dts ARM: at91/dt: Add Acme Arietta G25 2015-06-04 11:48:43 +02:00
at91-cosino_mega2560.dts
at91-cosino.dtsi
at91-foxg20.dts
at91-kizbox2.dts ARM: at91/dt: kizbox: use stdout-path 2015-06-04 10:00:38 +02:00
at91-kizbox.dts ARM: at91/dt: kizbox: fix mismatch LED PWM device 2015-06-04 11:49:11 +02:00
at91-kizboxmini.dts ARM: at91/dt: kizbox: use stdout-path 2015-06-04 10:00:38 +02:00
at91-qil_a9260.dts
at91-sama5d2_xplained.dts ARM: at91/dt: add minimal sama5d2 Xplained board 2015-07-30 18:44:44 +02:00
at91-sama5d3_xplained.dts ARM: at91/dt: sama5d3 xplained: use stdout-path 2015-06-04 10:00:39 +02:00
at91-sama5d4_xplained.dts ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees 2015-07-28 09:35:10 +02:00
at91-sama5d4ek.dts ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees 2015-07-28 09:35:10 +02:00
at91rm9200_pqfp.dtsi
at91rm9200.dtsi ARM: at91/dt: at91rm9200: use slow clock where necessary 2015-08-07 11:57:41 +02:00
at91rm9200ek.dts ARM: at91/dt: at91rm9200ek: use stdout-path 2015-06-04 10:00:38 +02:00
at91sam9g15.dtsi ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis 2015-08-07 17:33:06 +02:00
at91sam9g15ek.dts ARM: at91/dt: enable lcd support for at91sam9x5 SoCs 2015-08-07 17:33:47 +02:00
at91sam9g20.dtsi ARM: at91/dt: add SRAM nodes 2015-01-15 15:32:30 +01:00
at91sam9g20ek_2mmc.dts
at91sam9g20ek_common.dtsi ARM: at91/dt: at91sam9g20ek: use stdout-path 2015-06-04 10:00:38 +02:00
at91sam9g20ek.dts
at91sam9g25.dtsi ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls 2015-03-04 18:36:07 +01:00
at91sam9g25ek.dts ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640 2015-03-04 18:36:08 +01:00
at91sam9g35.dtsi ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis 2015-08-07 17:33:06 +02:00
at91sam9g35ek.dts ARM: at91/dt: enable lcd support for at91sam9x5 SoCs 2015-08-07 17:33:47 +02:00
at91sam9g45.dtsi ARM: at91/dt: at91sam9g45: use slow clock where necessary 2015-08-07 11:58:26 +02:00
at91sam9m10g45ek.dts ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek board 2015-07-30 14:09:21 +02:00
at91sam9n12.dtsi ARM: at91/dt: add drm support for at91sam9n12ek 2015-08-07 17:33:53 +02:00
at91sam9n12ek.dts ARM: at91/dt: add drm support for at91sam9n12ek 2015-08-07 17:33:53 +02:00
at91sam9rl.dtsi ARM: at91/dt: at91sam9rl: use slow clock where necessary 2015-08-07 11:58:35 +02:00
at91sam9rlek.dts ARM: at91/dt: at91sam9rlek: use stdout-path 2015-06-04 10:00:39 +02:00
at91sam9x5_can.dtsi
at91sam9x5_isi.dtsi ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls 2015-03-04 18:36:07 +01:00
at91sam9x5_lcd.dtsi ARM: at91/dt: define hlcdc node in at91sam9x5_lcd.dtsi 2015-08-07 17:32:45 +02:00
at91sam9x5_macb0.dtsi ARM: at91/dt: fix macb compatible strings 2015-03-07 22:31:21 -05:00
at91sam9x5_macb1.dtsi ARM: at91/dt: fix macb compatible strings 2015-03-07 22:31:21 -05:00
at91sam9x5_usart3.dtsi
at91sam9x5.dtsi ARM: at91/dt: at91sam9x5: use slow clock where necessary 2015-08-07 11:58:40 +02:00
at91sam9x5cm.dtsi ARM: at91/dt: at91sam9x5cm: enable RTC 2015-03-23 15:37:09 +01:00
at91sam9x5dm.dtsi ARM: at91/dt: at91sam9x5dm: add QT1070 touch button controller 2015-08-07 17:33:54 +02:00
at91sam9x5ek.dtsi ARM: at91/dt: at91sam9x5ek: use stdout-path 2015-06-04 10:00:39 +02:00
at91sam9x25.dtsi
at91sam9x25ek.dts
at91sam9x35.dtsi ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis 2015-08-07 17:33:06 +02:00
at91sam9x35ek.dts ARM: at91/dt: enable lcd support for at91sam9x5 SoCs 2015-08-07 17:33:47 +02:00
at91sam9xe.dtsi ARM: at91/dt: Add a dtsi for at91sam9xe 2015-01-15 15:33:20 +01:00
at91sam9260.dtsi ARM: at91/dt: at91sam9260: use slow clock where necessary 2015-08-07 11:57:47 +02:00
at91sam9261.dtsi ARM: at91/dt: at91sam9261: use slow clock where necessary 2015-08-07 11:58:16 +02:00
at91sam9261ek.dts ARM: at91/dt: at91sam9261ek: use stdout-path 2015-06-04 10:00:38 +02:00
at91sam9263.dtsi ARM: at91/dt: at91sam9263: use slow clock where necessary 2015-08-07 11:58:21 +02:00
at91sam9263ek.dts ARM: at91/dt: at91sam9263ek: use stdout-path 2015-06-04 10:00:38 +02:00
atlas6-evb.dts
atlas6.dtsi ARM: dts: atlas6: add resets property for SPI nodes 2014-11-25 18:46:43 +08:00
atlas7-evb.dts ARM: dts: atlas7: add a GPIO key for rearview button 2015-08-05 22:44:21 +08:00
atlas7.dtsi ARM: dts: atlas7: put pinctl property to get pinmux for NAND 2015-08-05 22:44:21 +08:00
axm55xx.dtsi
axm5516-amarillo.dts
axm5516-cpus.dtsi
axp152.dtsi ARM: dts: axp152: Add a dtsi file for the axp152 pmic 2015-07-09 10:10:05 +02:00
axp209.dtsi ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
bcm2835-rpi-b-plus.dts ARM: bcm2835: dt: Use pinctrl header 2015-05-14 10:02:31 +01:00
bcm2835-rpi-b.dts ARM: bcm2835: dt: Use pinctrl header 2015-05-14 10:02:31 +01:00
bcm2835-rpi.dtsi ARM: bcm2835: Add the firmware driver information to the RPi DT 2015-08-11 16:56:32 +01:00
bcm2835.dtsi ARM: bcm2835: dt: Use 0x4 prefix for DMA bus addresses to SDRAM. 2015-05-14 10:02:34 +01:00
bcm4708-asus-rt-ac56u.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm4708-asus-rt-ac68u.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm4708-buffalo-wzr-1750dhp.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm4708-luxul-xwc-1000.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm4708-netgear-r6250.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm4708-netgear-r6300-v2.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm4708-smartrg-sr400ac.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm4708.dtsi
bcm4709-asus-rt-ac87u.dts ARM: BCM5301X: Add DT for Asus RT-AC87U 2015-06-06 16:13:16 -07:00
bcm4709-buffalo-wxr-1900dhp.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm4709-netgear-r8000.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm5301x-nand-cs0-bch8.dtsi ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm5301x.dtsi ARM: BCM5301X: Add profiling support 2015-08-11 15:17:24 +02:00
bcm7445-bcm97445svmb.dts ARM: bcm7445: add NAND to DTS 2015-05-13 10:56:22 -07:00
bcm7445.dtsi ARM: dts: brcmstb: add BCM7445 GPIO nodes 2015-08-11 15:17:24 +02:00
bcm11351.dtsi
bcm21664-garnet.dts
bcm21664.dtsi
bcm28155-ap.dts
bcm47081-asus-rt-n18u.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm47081-buffalo-wzr-600dhp2.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm47081-buffalo-wzr-900dhp.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm47081.dtsi ARM: BCM5301X: Add DT for Asus RT-N18U 2014-12-04 20:58:08 +01:00
bcm59056.dtsi
bcm63138.dtsi ARM: dts: BCM63xx: re-parent NAND controller node 2015-05-27 09:57:34 -07:00
bcm911360_entphn.dts ARM: dts: cygnus: enable GPIO based hook detection 2015-03-10 09:27:05 -07:00
bcm911360k.dts
bcm958300k.dts ARM: dts: cygnus: Enable NAND support for Cygnus 2015-05-13 10:57:08 -07:00
bcm958305k.dts ARM: dts: Enable Broadcom Cygnus BCM958305K 2015-03-02 15:42:17 -08:00
bcm963138dvt.dts ARM: bcm63138: add NAND DT support 2015-05-13 10:56:46 -07:00
bcm-cygnus-clock.dtsi ARM: dts: enable clock support for Broadcom Cygnus 2015-07-07 18:08:18 -07:00
bcm-cygnus.dtsi ARM: dts: cygnus: Enable NAND support for Cygnus 2015-05-13 10:57:08 -07:00
berlin2-sony-nsz-gs7.dts ARM: dts: berlin: relicense the BG2 Sony NSZ-GS7 dts under GPLv2/X11 2015-05-16 00:06:37 +02:00
berlin2.dtsi ARM: SoC: driver updates for v4.2 2015-06-26 11:54:29 -07:00
berlin2cd-google-chromecast.dts ARM: dts: berlin: relicense the BG2CD Google Chromecast dts under GPLv2/X11 2015-05-16 00:06:45 +02:00
berlin2cd.dtsi ARM: SoC: driver updates for v4.2 2015-06-26 11:54:29 -07:00
berlin2q-marvell-dmp.dts ARM: dts: berlin: relicense the BG2Q Marvell DMP dts under GPLv2/X11 2015-05-16 00:06:27 +02:00
berlin2q.dtsi ARM: SoC: driver updates for v4.2 2015-06-26 11:54:29 -07:00
cros-adc-thermistors.dtsi
cros-ec-keyboard.dtsi ARM: dts: cros-ec-keyboard: Add support for some Japanese keys 2015-07-13 23:44:44 +02:00
cros-ec-sbs.dtsi ARM: dts: Add sbs-battery dts fragment used by chromebooks 2015-07-15 15:55:19 +02:00
cx92755_equinox.dts ARM: digicolor: dts: use stdout-path for console configuration 2015-07-14 11:20:33 +02:00
cx92755.dtsi ARM: digicolor: enable watchdog device 2015-07-14 11:20:30 +02:00
da850-enbw-cmc.dts
da850-evm.dts
da850.dtsi
dm814x-clocks.dtsi ARM: dts: Add minimal clocks for dm814x 2015-07-23 22:33:18 -07:00
dm814x.dtsi ARM: dts: Fix dm814x control base to properly initialize Ethernet PHY 2015-09-14 12:12:15 -07:00
dm816x-clocks.dtsi ARM: dts: Add basic clocks for dm816x 2015-01-19 11:47:35 -08:00
dm816x.dtsi ARM: dts: Remove L3 compatible value for dm816x 2015-07-14 04:15:11 -07:00
dm8148-evm.dts ARM: dts: Fix dm814x control base to properly initialize Ethernet PHY 2015-09-14 12:12:15 -07:00
dm8148-t410.dts ARM: dts: Fixup model name for HP t410 dts 2015-09-14 13:33:47 -07:00
dm8168-evm.dts ARM: DT updates for v4.1 2015-04-22 09:09:46 -07:00
dove-cm-a510.dtsi ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510 2015-05-11 14:56:54 +02:00
dove-cubox-es.dts
dove-cubox.dts ARM: dove: Add clock-names to CuBox Si5351 clk generator 2015-05-11 15:17:47 +02:00
dove-d2plug.dts
dove-d3plug.dts
dove-dove-db.dts
dove-sbc-a510.dts ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510 2015-05-11 14:56:54 +02:00
dove.dtsi ARM: dt: dove: add GPU power domain description 2015-08-05 18:34:30 +02:00
dra7-evm.dts ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:12 -07:00
dra7.dtsi ARM: dts: DRA7: Add common IOMMU nodes 2015-10-12 15:53:46 -07:00
dra7xx-clocks.dtsi arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk 2015-06-04 09:01:23 +03:00
dra72-evm.dts ARM: dts: dra72-evm: remove cpsw gpio hogging and add mode-gpios 2015-10-20 09:16:21 -07:00
dra72x.dtsi ARM: dts: DRA72x: Add IPC sub-mailbox nodes for IPU1, IPU2 & DSP1 2015-10-12 15:00:37 -07:00
dra74x.dtsi ARM: dts: DRA74x: Add IOMMU nodes for DSP2 2015-10-12 15:53:47 -07:00
ea3250.dts
ecx-2000.dts
ecx-common.dtsi
efm32gg-dk3750.dts
efm32gg.dtsi
elpida_ecb240abacn.dtsi
emev2-kzm9d.dts ARM: shmobile: emev2: kzm9d: enable IIC busses 2015-07-15 09:12:13 +09:00
emev2.dtsi ARM: shmobile: emev2: add IIC cores to dtsi 2015-07-15 09:12:00 +09:00
ethernut5.dts ARM: at91/dt: ethernut5: use at91sam9xe.dtsi 2015-01-15 15:33:21 +01:00
evk-pro3.dts
exynos4-cpu-thermal.dtsi ARM: dts: define default thermal-zones for exynos4 2015-02-27 05:22:58 +09:00
exynos4.dtsi ARM: dts: add iommu property to JPEG device for exynos4 2015-08-14 02:30:58 +09:00
exynos4x12-pinctrl.dtsi ARM: dts: Add labels to exynos4 nodes 2015-06-03 09:56:21 +09:00
exynos4x12.dtsi ARM: dts: add sysmmu nodes for exynos4 2015-06-04 08:09:41 +09:00
exynos5.dtsi ARM: dts: Add labels to exynos5 nodes 2015-06-03 09:56:47 +09:00
exynos3250-monk.dts ARM: dts: Add CPU cooling binding for exynos3250 boards 2015-08-14 02:08:56 +09:00
exynos3250-pinctrl.dtsi
exynos3250-rinato.dts ARM: SoC: late fixes and dependencies 2015-09-10 17:59:04 -07:00
exynos3250.dtsi ARM: dts: Add CPU cooling binding for exynos3250 boards 2015-08-14 02:08:56 +09:00
exynos4210-origen.dts ARM: dts: add CPU OPP and regulator supply property for exynos4210 2015-07-21 12:32:29 +09:00
exynos4210-pinctrl.dtsi
exynos4210-smdkv310.dts ARM: dts: Use labels for overriding nodes in exynos4210-smdkv310 2015-06-03 09:56:34 +09:00
exynos4210-trats.dts ARM: dts: add CPU OPP and regulator supply property for exynos4210 2015-07-21 12:32:29 +09:00
exynos4210-universal_c210.dts ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210 2015-07-21 12:55:12 +09:00
exynos4210.dtsi ARM: dts: add CPU OPP and regulator supply property for exynos4210 2015-07-21 12:32:29 +09:00
exynos4212.dtsi ARM: dts: add CPU OPP and regulator supply property for exynos4x12 2015-08-14 02:06:15 +09:00
exynos4412-odroid-common.dtsi ARM: dts: add CPU OPP and regulator supply property for exynos4x12 2015-08-14 02:06:15 +09:00
exynos4412-odroidu3.dts ARM: dts: enable SPI1 for exynos4412-odroidu3 2015-08-14 02:30:58 +09:00
exynos4412-odroidx2.dts ARM: dts: Switch Odroid X2/U2 to simple-audio-card 2015-02-09 14:18:20 +08:00
exynos4412-odroidx.dts ARM: dts: Use labels for overriding nodes in exynos4412-odroid 2015-06-03 09:56:42 +09:00
exynos4412-origen.dts ARM: dts: add CPU OPP and regulator supply property for exynos4x12 2015-08-14 02:06:15 +09:00
exynos4412-smdk4412.dts ARM: dts: Use labels for overriding nodes in exynos4412-smdk4412 2015-06-03 09:56:43 +09:00
exynos4412-tiny4412.dts ARM: dts: Use labels for overriding nodes in exynos4412-tiny4412 2015-06-03 09:56:46 +09:00
exynos4412-tmu-sensor-conf.dtsi ARM: dts: add TMU default definitions for exynos4412 2015-02-27 05:22:56 +09:00
exynos4412-trats2.dts ARM: dts: add CPU OPP and regulator supply property for exynos4x12 2015-08-14 02:06:15 +09:00
exynos4412.dtsi ARM: dts: add CPU OPP and regulator supply property for exynos4x12 2015-08-14 02:06:15 +09:00
exynos4415-pinctrl.dtsi
exynos4415.dtsi ARM: dts: add sysmmu nodes for exynos4415 2015-06-04 08:09:41 +09:00
exynos5250-arndale.dts ARM: dts: add CPU OPP and regulator supply property for exynos5250 2015-08-14 02:06:02 +09:00
exynos5250-pinctrl.dtsi ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths 2015-07-21 12:59:17 +09:00
exynos5250-smdk5250.dts ARM: dts: add CPU OPP and regulator supply property for exynos5250 2015-08-14 02:06:02 +09:00
exynos5250-snow.dts ARM: dts: Add SPI CS on exynos5250-snow 2015-08-14 02:09:05 +09:00
exynos5250-spring.dts ARM: dts: add CPU OPP and regulator supply property for exynos5250 2015-08-14 02:06:02 +09:00
exynos5250.dtsi ARM: dts: add CPU OPP and regulator supply property for exynos5250 2015-08-14 02:06:02 +09:00
exynos5260-pinctrl.dtsi
exynos5260-xyref5260.dts ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
exynos5260.dtsi
exynos5410-smdk5410.dts ARM: dts: Clean up indentation for exynos5410-smdk5410 2015-07-21 12:55:00 +09:00
exynos5410.dtsi
exynos5420-arndale-octa.dts ARM: dts: Use labels for overriding nodes in exynos5420-arndale-octa 2015-06-03 09:56:49 +09:00
exynos5420-peach-pit.dts ARM: dts: Use labels for overriding nodes in exynos542x 2015-06-03 09:56:50 +09:00
exynos5420-pinctrl.dtsi ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths 2015-07-21 13:01:23 +09:00
exynos5420-smdk5420.dts ARM: dts: Use labels for overriding nodes in exynos5420-smdk5420 2015-06-03 09:56:51 +09:00
exynos5420-trip-points.dtsi ARM: dts: Fix typo in trip point temperature for exynos5420/5440 2015-05-09 03:11:21 +09:00
exynos5420.dtsi ARM: dts: Include exynos5420-pinctrl after the nodes were defined for exynos5420 2015-07-21 13:00:49 +09:00
exynos5422-cpu-thermal.dtsi ARM: dts: Define default thermal-zones for exynos5422 2015-07-21 12:56:59 +09:00
exynos5422-cpus.dtsi ARM: dts: add exynos5422-cpus.dtsi to correct cpu order 2015-08-14 02:08:24 +09:00
exynos5422-odroidxu3-common.dtsi ARM: dts: add exynos5422-cpus.dtsi to correct cpu order 2015-08-14 02:08:24 +09:00
exynos5422-odroidxu3-lite.dts ARM: dts: Add Odroid XU3 Lite support 2015-06-03 09:56:57 +09:00
exynos5422-odroidxu3.dts ARM: dts: Add Odroid XU3 Lite support 2015-06-03 09:56:57 +09:00
exynos5440-sd5v1.dts ARM: dts: Use labels for overriding nodes in exynos5440 boards 2015-06-03 09:56:52 +09:00
exynos5440-ssdk5440.dts ARM: dts: Use labels for overriding nodes in exynos5440 boards 2015-06-03 09:56:52 +09:00
exynos5440-tmu-sensor-conf.dtsi ARM: dts: Trip points and sensor configuration data for exynos5440 2015-02-27 05:22:58 +09:00
exynos5440-trip-points.dtsi ARM: dts: Fix typo in trip point temperature for exynos5420/5440 2015-05-09 03:11:21 +09:00
exynos5440.dtsi ARM: dts: Add labels to exynos5 nodes 2015-06-03 09:56:47 +09:00
exynos5800-peach-pi.dts ARM: dts: Use labels for overriding nodes in exynos542x 2015-06-03 09:56:50 +09:00
exynos5800.dtsi
ge863-pro3.dtsi
hi3620-hi4511.dts
hi3620.dtsi
highbank.dts
hip01-ca9x2.dts ARM: dts: Add hip01-ca9x2 dts file 2015-01-21 14:35:06 -08:00
hip01.dtsi ARM: dts: Add hip01-ca9x2 dts file 2015-01-21 14:35:06 -08:00
hip04-d01.dts ARM: hisi: revert changes from hisi/hip04-dt branch 2015-06-24 17:30:39 -07:00
hip04.dtsi ARM: hisi: revert changes from hisi/hip04-dt branch 2015-06-24 17:30:39 -07:00
hisi-x5hd2-dkb.dts
hisi-x5hd2.dtsi
imx1-ads.dts
imx1-apf9328.dts
imx1-pinfunc.h
imx1.dtsi
imx6dl-apf6dev.dts ARM: dts: Armadeus Systems APF6 family support (i.MX6) 2015-06-03 15:04:00 +08:00
imx6dl-aristainetos2_4.dts ARM: dts: imx6: add DT for aristainetos2 board 2015-06-03 15:04:34 +08:00
imx6dl-aristainetos2_7.dts ARM: dts: imx6: add DT for aristainetos2 board 2015-06-03 15:04:34 +08:00
imx6dl-aristainetos_4.dts ARM: dts: imx6dl-aristainetos: enable backlight PWM explicitly 2015-03-30 16:43:33 +08:00
imx6dl-aristainetos_7.dts ARM: dts: imx6dl-aristainetos: enable backlight PWM explicitly 2015-03-30 16:43:33 +08:00
imx6dl-cubox-i.dts ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6dl-dfi-fs700-m60.dts
imx6dl-gw51xx.dts
imx6dl-gw52xx.dts
imx6dl-gw53xx.dts
imx6dl-gw54xx.dts
imx6dl-gw551x.dts ARM: dts: Gateworks GW5510 support (i.MX6) 2015-06-03 15:03:59 +08:00
imx6dl-gw552x.dts
imx6dl-hummingboard.dts ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6dl-nitrogen6x.dts
imx6dl-phytec-pbab01.dts
imx6dl-phytec-pfla02.dtsi
imx6dl-pinfunc.h
imx6dl-rex-basic.dts
imx6dl-riotboard.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6dl-sabreauto.dts
imx6dl-sabrelite.dts
imx6dl-sabresd.dts
imx6dl-tx6dl-comtft.dts
imx6dl-tx6u-801x.dts
imx6dl-tx6u-811x.dts
imx6dl-udoo.dts ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo 2015-01-06 19:07:11 +08:00
imx6dl-wandboard-revb1.dts
imx6dl-wandboard.dts
imx6dl.dtsi ARM: dts: imx6dl: add imx6dl gpt specific compatible string 2015-06-03 17:04:53 +08:00
imx6q-apf6dev.dts ARM: dts: Armadeus Systems APF6 family support (i.MX6) 2015-06-03 15:04:00 +08:00
imx6q-arm2.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6q-cm-fx6.dts
imx6q-cubox-i.dts ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6q-dfi-fs700-m60.dts
imx6q-dmo-edmqmx6.dts
imx6q-gk802.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6q-gw51xx.dts
imx6q-gw52xx.dts
imx6q-gw53xx.dts
imx6q-gw54xx.dts
imx6q-gw551x.dts ARM: dts: Gateworks GW5510 support (i.MX6) 2015-06-03 15:03:59 +08:00
imx6q-gw552x.dts
imx6q-gw5400-a.dts
imx6q-hummingboard.dts ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6q-nitrogen6x.dts
imx6q-phytec-pbab01.dts
imx6q-phytec-pfla02.dtsi
imx6q-pinfunc.h
imx6q-rex-pro.dts
imx6q-sabreauto.dts
imx6q-sabrelite.dts
imx6q-sabresd.dts
imx6q-sbc6x.dts
imx6q-tbs2910.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6q-tx6q-1010-comtft.dts
imx6q-tx6q-1010.dts
imx6q-tx6q-1020-comtft.dts
imx6q-tx6q-1020.dts
imx6q-tx6q-1110.dts
imx6q-udoo.dts ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo 2015-01-06 19:07:11 +08:00
imx6q-wandboard-revb1.dts
imx6q-wandboard.dts
imx6q.dtsi ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' node 2015-03-30 16:38:51 +08:00
imx6qdl-apf6.dtsi ARM: dts: Armadeus Systems APF6 family support (i.MX6) 2015-06-03 15:04:00 +08:00
imx6qdl-apf6dev.dtsi ARM: dts: Armadeus Systems APF6 family support (i.MX6) 2015-06-03 15:04:00 +08:00
imx6qdl-aristainetos2.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-aristainetos.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-cubox-i.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-dfi-fs700-m60.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-gw51xx.dtsi ARM: dts: ventana: add UHS-I support for Ventana boards 2015-07-15 10:20:33 +08:00
imx6qdl-gw52xx.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-gw53xx.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-gw54xx.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-gw551x.dtsi ARM: dts: ventana: add UHS-I support for Ventana boards 2015-07-15 10:20:33 +08:00
imx6qdl-gw552x.dtsi ARM: dts: ventana: add UHS-I support for Ventana boards 2015-07-15 10:20:33 +08:00
imx6qdl-hummingboard.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-microsom-ar8035.dtsi ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6qdl-microsom.dtsi ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6qdl-nitrogen6x.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-phytec-pbab01.dtsi ARM: dts: imx6: phyFLEX: Add CAN support 2014-11-23 15:08:15 +08:00
imx6qdl-phytec-pfla02.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-rex.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-sabreauto.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-sabrelite.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-sabresd.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-tx6.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-udoo.dtsi ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo 2015-01-06 19:07:11 +08:00
imx6qdl-wandboard-revb1.dtsi
imx6qdl-wandboard-revc1.dtsi
imx6qdl-wandboard.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6sl-evk.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6sl-pinfunc.h
imx6sl-warp.dts ARM: dts: imx6sl-warp: Add changes for rev1.12 2015-08-11 23:15:11 +08:00
imx6sl.dtsi ARM: dts: imx: update snvs to use syscon access register 2015-08-11 23:15:17 +08:00
imx6sx-pinfunc.h
imx6sx-sabreauto.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6sx-sdb-reva.dts ARM: imx6sx-sdb: change default board as reva board 2015-03-30 16:38:50 +08:00
imx6sx-sdb.dts ARM: imx6sx-sdb: add revb board and make it default 2015-03-30 16:38:51 +08:00
imx6sx-sdb.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6sx.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6ul-14x14-evk.dts ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support 2015-08-11 23:15:24 +08:00
imx6ul-pinfunc.h ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h 2015-08-11 23:15:20 +08:00
imx6ul.dtsi ARM: dts: imx6ul: add snvs power key support 2015-08-11 23:15:27 +08:00
imx7d-pinfunc.h ARM: dts: add pinfunc include file to support imx7d 2015-06-03 15:03:57 +08:00
imx7d-sdb.dts dts: imx7: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:36 +02:00
imx7d.dtsi ARM: dts: imx7d: enable snvs rtc, onoffkey and power off 2015-08-11 23:15:25 +08:00
imx23-evk.dts
imx23-olinuxino.dts The i.MX device tree changes for 4.2: 2015-06-10 17:01:25 -07:00
imx23-pinfunc.h
imx23-stmp378x_devb.dts
imx23.dtsi ARM: dts: mx23: fix iio-hwmon support 2015-07-08 17:01:33 +08:00
imx25-eukrea-cpuimx25.dtsi
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
imx25-eukrea-mbimxsd25-baseboard.dts
imx25-karo-tx25.dts
imx25-pdk.dts dts: imx25: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:36 +02:00
imx25-pinfunc.h ARM: dts: imx25-pinfunc: Add several pinfunctions 2015-03-30 19:22:12 +08:00
imx25.dtsi ARM: dts: imx25: Add #pwm-cells to pwm4 2015-04-27 22:40:36 +08:00
imx27-apf27.dts
imx27-apf27dev.dts apf27dev: add max5821 to the dts 2015-01-05 20:43:48 +08:00
imx27-eukrea-cpuimx27.dtsi
imx27-eukrea-mbimxsd27-baseboard.dts
imx27-pdk.dts
imx27-phytec-phycard-s-rdk.dts
imx27-phytec-phycard-s-som.dtsi
imx27-phytec-phycore-rdk.dts
imx27-phytec-phycore-som.dtsi
imx27-pinfunc.h
imx27.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx28-apf28.dts ARM: dts: imx28-apf28: fix mac0 gpio polarity 2015-03-30 16:38:52 +08:00
imx28-apf28dev.dts ARM: dts: imx28-apf28dev: add wakeup function to user button 2015-03-30 16:43:49 +08:00
imx28-apx4devkit.dts
imx28-cfa10036.dts ARM: mxs: fix in tree users of ssd1306 2015-06-03 15:03:57 +08:00
imx28-cfa10037.dts
imx28-cfa10049.dts
imx28-cfa10055.dts
imx28-cfa10056.dts
imx28-cfa10057.dts
imx28-cfa10058.dts
imx28-duckbill.dts
imx28-eukrea-mbmx28lc.dtsi
imx28-eukrea-mbmx283lc.dts
imx28-eukrea-mbmx287lc.dts
imx28-evk.dts ARM: dts: imx28-evk: remove duplicate property 2015-01-20 19:39:28 +08:00
imx28-m28.dtsi
imx28-m28cu3.dts
imx28-m28evk.dts
imx28-pinfunc.h
imx28-sps1.dts
imx28-tx28.dts
imx28.dtsi ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name 2015-04-27 22:44:27 +08:00
imx31-bug.dts
imx31.dtsi
imx35-eukrea-cpuimx35.dtsi
imx35-eukrea-mbimxsd35-baseboard.dts
imx35-pdk.dts
imx35-pinfunc.h
imx35.dtsi ARM: dts: i.MX35: Fix can support. 2015-07-25 11:35:08 +08:00
imx50-evk.dts
imx50-pinfunc.h
imx50.dtsi ARM: dts: imx: Add dr_mode host setting to all host-only usb instances 2015-03-30 16:42:23 +08:00
imx51-apf51.dts
imx51-apf51dev.dts dts: imx51: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:34 +02:00
imx51-babbage.dts ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling 2015-01-06 20:25:58 +08:00
imx51-digi-connectcore-jsk.dts
imx51-digi-connectcore-som.dtsi
imx51-eukrea-cpuimx51.dtsi
imx51-eukrea-mbimxsd51-baseboard.dts
imx51-pinfunc.h
imx51.dtsi ARM: dts: imx: Add dr_mode host setting to all host-only usb instances 2015-03-30 16:42:23 +08:00
imx53-ard.dts dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-m53.dtsi
imx53-m53evk.dts dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-mba53.dts
imx53-pinfunc.h
imx53-qsb-common.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx53-qsb.dts
imx53-qsrb.dts ARM: dts: imx53-qsb: select open-drain mode for i2c1 pads 2015-07-15 10:20:36 +08:00
imx53-smd.dts dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-tqma53.dtsi dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-tx53-x03x.dts
imx53-tx53-x13x.dts
imx53-tx53.dtsi dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-voipac-bsb.dts dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-voipac-dmm-668.dtsi
imx53.dtsi ARM: dts: imx: Add dr_mode host setting to all host-only usb instances 2015-03-30 16:42:23 +08:00
integrator.dtsi ARM: dts: update syscons to use simple-mfd 2015-05-11 08:55:03 +02:00
integratorap.dts
integratorcp.dts
k2e-clocks.dtsi ARM: dts: keystone: fix dt bindings to use post div register for mainpll 2015-07-31 22:30:11 +02:00
k2e-evm.dts ARM: dts: k2e-evm: Add device bindings for netcp driver 2015-06-10 15:42:59 -07:00
k2e-netcp.dtsi ARM: dts: k2e: fix the netcp range size 2015-06-10 15:43:00 -07:00
k2e.dtsi ARM: Couple of Keysyone MDIO DTS fixes for 4.2-rc6+ 2015-08-16 21:29:57 +02:00
k2hk-clocks.dtsi ARM: dts: keystone: fix dt bindings to use post div register for mainpll 2015-07-31 22:30:11 +02:00
k2hk-evm.dts ARM: dts: k2hk-evm: Add device bindings for netcp driver 2015-06-10 15:42:59 -07:00
k2hk-netcp.dtsi ARM: dts: k2hk: fix the netcp range size 2015-06-10 15:43:00 -07:00
k2hk.dtsi ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file 2015-08-13 10:01:29 -07:00
k2l-clocks.dtsi ARM: dts: keystone: fix dt bindings to use post div register for mainpll 2015-07-31 22:30:11 +02:00
k2l-evm.dts ARM: dts: k2l-evm: Add device bindings for netcp driver 2015-06-10 15:43:00 -07:00
k2l-netcp.dtsi ARM: dts: k2l: fix the netcp range size 2015-06-10 15:43:00 -07:00
k2l.dtsi ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file 2015-08-13 10:01:29 -07:00
keystone-clocks.dtsi
keystone.dtsi ARM: Couple of Keysyone MDIO DTS fixes for 4.2-rc6+ 2015-08-16 21:29:57 +02:00
kirkwood-98dx4122.dtsi
kirkwood-6192.dtsi ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192 2014-12-21 06:41:54 -06:00
kirkwood-6281.dtsi
kirkwood-6282.dtsi
kirkwood-b3.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-blackarmor-nas220.dts Kirkwood: add support for Seagate BlackArmor NAS220 2015-01-05 12:03:38 -06:00
kirkwood-cloudbox.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-d2net.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-db-88f6281.dts
kirkwood-db-88f6282.dts
kirkwood-db.dtsi
kirkwood-dir665.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-dns320.dts
kirkwood-dns325.dts
kirkwood-dnskw.dtsi
kirkwood-dockstar.dts
kirkwood-dreamplug.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-ds109.dts
kirkwood-ds110jv10.dts
kirkwood-ds111.dts
kirkwood-ds112.dts
kirkwood-ds209.dts
kirkwood-ds210.dts
kirkwood-ds212.dts
kirkwood-ds212j.dts
kirkwood-ds409.dts
kirkwood-ds409slim.dts
kirkwood-ds411.dts
kirkwood-ds411j.dts
kirkwood-ds411slim.dts
kirkwood-goflexnet.dts
kirkwood-guruplug-server-plus.dts
kirkwood-ib62x0.dts
kirkwood-iconnect.dts
kirkwood-iomega_ix2_200.dts ARM: dts: add gpio_poweroff support for Iomega ix2-200 2014-12-21 06:38:54 -06:00
kirkwood-is2.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-km_common.dtsi
kirkwood-km_fixedeth.dts
kirkwood-km_kirkwood.dts
kirkwood-laplug.dts
kirkwood-lschlv2.dts
kirkwood-lswvl.dts ARM: dts: add buffalo linkstation ls-wvl/vl 2015-07-09 15:28:06 +02:00
kirkwood-lswxl.dts ARM: dts: add buffalo linkstation ls-wxl/wsxl 2015-07-09 15:00:02 +02:00
kirkwood-lsxhl.dts
kirkwood-lsxl.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-mplcec4.dts
kirkwood-mv88f6281gtw-ge.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-nas2big.dts ARM: Kirkwood: add DT description for nas2big 2015-03-11 18:16:03 +01:00
kirkwood-net2big.dts ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2 2015-03-04 14:31:34 +01:00
kirkwood-net5big.dts
kirkwood-netgear_readynas_duo_v2.dts
kirkwood-netgear_readynas_nv+_v2.dts
kirkwood-netxbig.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-ns2-common.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-ns2.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-ns2lite.dts
kirkwood-ns2max.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-ns2mini.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-nsa3x0-common.dtsi
kirkwood-nsa310.dts
kirkwood-nsa310a.dts
kirkwood-nsa320.dts
kirkwood-openblocks_a6.dts
kirkwood-openblocks_a7.dts
kirkwood-openrd-base.dts
kirkwood-openrd-client.dts
kirkwood-openrd-ultimate.dts
kirkwood-openrd.dtsi
kirkwood-pogo_e02.dts ARM: Kirkwood: Added support for pogoplug e02 (pink/gray) 2015-01-21 18:35:26 -06:00
kirkwood-rd88f6192.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-rd88f6281-a.dts
kirkwood-rd88f6281-z0.dts
kirkwood-rd88f6281.dtsi
kirkwood-rs212.dts
kirkwood-rs409.dts
kirkwood-rs411.dts
kirkwood-sheevaplug-common.dtsi
kirkwood-sheevaplug-esata.dts
kirkwood-sheevaplug.dts
kirkwood-synology.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-t5325.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-topkick.dts
kirkwood-ts219-6281.dts
kirkwood-ts219-6282.dts
kirkwood-ts219.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-ts419-6281.dts
kirkwood-ts419-6282.dts
kirkwood-ts419.dtsi
kirkwood.dtsi
logicpd-torpedo-37xx-devkit.dts ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit 2015-05-20 09:23:43 -07:00
logicpd-torpedo-som.dtsi ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit 2015-05-20 09:23:43 -07:00
lpc18xx.dtsi ARM: dts: lpc18xx: add pl172 memory-controller node 2015-08-05 19:30:16 +02:00
lpc32xx.dtsi
lpc4337-ciaa.dts ARM: dts: add DT for CIAA LPC4337 industrial computer 2015-07-14 15:12:12 +02:00
lpc4350-hitex-eval.dts ARM: dts: lpc4350-hitex-eval: add emc pins and static memory devices 2015-08-05 19:30:33 +02:00
lpc4350.dtsi ARM: dts: Add DT for Hitex LPC4350 Evaluation Board 2015-05-15 22:28:29 +02:00
lpc4357-ea4357-devkit.dts ARM: dts: lpc4357-ea4357: add mmio-gpio leds 2015-08-05 19:30:24 +02:00
lpc4357.dtsi ARM: dts: Add DT for Embedded Artists LPC4357 Developers Kit 2015-05-15 22:28:21 +02:00
ls1021a-qds.dts ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR 2015-08-11 23:15:22 +08:00
ls1021a-twr.dts ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR 2015-08-11 23:15:22 +08:00
ls1021a.dtsi ARM: dts: ls1021a: Add the eTSEC controller nodes 2015-08-11 23:15:21 +08:00
Makefile ARM: dts: Add basic support for isee igepv5 2015-10-16 12:32:33 -07:00
meson6-atv1200.dts ARM: dts: meson: enable Ethernet controller 2015-03-02 11:00:55 +01:00
meson6.dtsi
meson8-minix-neo-x8.dts ARM: dts: meson: add DTS file for MINIX NEO-X8 2015-03-02 11:01:03 +01:00
meson8.dtsi ARM: dts: meson8: add pinctrl node 2015-03-02 11:00:59 +01:00
meson.dtsi ARM: dts: meson: enable Ethernet controller 2015-03-02 11:00:55 +01:00
mmp2-brownstone.dts
mmp2.dtsi
moxart-uc7112lx.dts
moxart.dtsi
mpa1600.dts
mt6580-evbp1.dts ARM: dts: mediatek: add mt6580 basic support 2015-07-18 00:22:42 +02:00
mt6580.dtsi ARM: dts: mediatek: add mt6580 basic support 2015-07-18 00:22:42 +02:00
mt6589-aquaris5.dts ARM: mediatek: dts: Add uart to Aquaris5 2015-01-11 21:17:49 +01:00
mt6589.dtsi ARM: DTS: Add watchdog to mt6589 2015-03-30 13:18:23 +02:00
mt6592-evb.dts
mt6592.dtsi ARM: mediatek: dts: Add uart to mt6592 2015-01-20 18:09:39 +01:00
mt8127-moose.dts ARM: mediatek: dts: Add UART dts for MT8127 and MT8135 boards 2015-01-08 12:12:43 +01:00
mt8127.dtsi ARM: dts: mt8127: correct uart instance address 2015-05-16 10:21:15 +02:00
mt8135-evbp1.dts ARM: dts: mt8135-evbp1: Add PMIC support 2015-07-17 21:43:17 +02:00
mt8135-pinfunc.h ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135. 2015-05-04 10:56:07 +02:00
mt8135.dtsi ARM: dts: mediatek mt8135: Use real UART clocks 2015-07-17 21:43:27 +02:00
mxs-pinfunc.h
nspire-classic.dtsi devicetree: Add TI-NSPIRE USB OTG support to device tree 2015-03-04 23:44:17 +01:00
nspire-clp.dts
nspire-cx.dts devicetree: Add TI-NSPIRE USB OTG support to device tree 2015-03-04 23:44:17 +01:00
nspire-tp.dts
nspire.dtsi devicetree: Add TI-NSPIRE USB OTG support to device tree 2015-03-04 23:44:17 +01:00
omap2.dtsi ARM: dts: omap2: Correct the dma controller's property names 2015-02-24 10:35:43 -08:00
omap3-beagle-xm-ab.dts
omap3-beagle-xm.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-beagle.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-cm-t3x30.dtsi ARM: dts: omap3: Remove all references to ti,codec property 2015-03-16 19:24:51 -07:00
omap3-cm-t3x.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-cm-t3517.dts ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
omap3-cm-t3530.dts
omap3-cm-t3730.dts ARM: dts: add wl12xx/wl18xx bindings 2015-03-24 09:48:14 -07:00
omap3-devkit8000-common.dtsi ARM: dts: omap3-devkit8000: add LCD panels 2015-08-06 00:37:41 -07:00
omap3-devkit8000-lcd43.dts ARM: dts: omap3-devkit8000: add LCD panels 2015-08-06 00:37:41 -07:00
omap3-devkit8000-lcd70.dts ARM: dts: omap3-devkit8000: add LCD panels 2015-08-06 00:37:41 -07:00
omap3-devkit8000-lcd-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-devkit8000.dts ARM: dts: omap3-devkit8000: add LCD panels 2015-08-06 00:37:41 -07:00
omap3-evm-37xx.dts
omap3-evm-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-evm.dts
omap3-gta04.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-gta04a3.dts
omap3-gta04a4.dts
omap3-gta04a5.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-ha-common.dtsi
omap3-ha-lcd.dts
omap3-ha.dts
omap3-igep0020-common.dtsi ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi 2015-09-14 12:13:38 -07:00
omap3-igep0020-rev-f.dts ARM: dts: add wl12xx/wl18xx bindings 2015-03-24 09:48:14 -07:00
omap3-igep0020.dts ARM: dts: omap3-igep0020: Remove duplicate uart2 pinmux 2015-10-12 16:45:20 -07:00
omap3-igep0030-common.dtsi
omap3-igep0030-rev-g.dts ARM: dts: add wl12xx/wl18xx bindings 2015-03-24 09:48:14 -07:00
omap3-igep0030.dts
omap3-igep.dtsi ARM: dts: omap3-igep: Use OMAP3_CORE1_IOPAD pinmux macro 2015-10-14 12:28:13 -07:00
omap3-ldp.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-lilly-a83x.dtsi ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO 2015-10-12 16:41:41 -07:00
omap3-lilly-dbb056.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-n9.dts ARM: dts: n950, n9: Add primary camera support 2015-03-19 10:59:28 -07:00
omap3-n900.dts ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 2015-05-29 13:19:02 -07:00
omap3-n950-n9.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-n950.dts ARM: dts: n950, n9: Add primary camera support 2015-03-19 10:59:28 -07:00
omap3-overo-alto35-common.dtsi
omap3-overo-alto35.dts
omap3-overo-base.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-overo-chestnut43-common.dtsi
omap3-overo-chestnut43.dts
omap3-overo-common-dvi.dtsi
omap3-overo-common-lcd35.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-overo-common-lcd43.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-overo-common-peripherals.dtsi
omap3-overo-gallop43-common.dtsi
omap3-overo-gallop43.dts
omap3-overo-palo35-common.dtsi ARM: dts: overo: Add device tree for Palo35 board 2015-07-14 04:15:11 -07:00
omap3-overo-palo35.dts ARM: dts: overo: Add device tree for Palo35 board 2015-07-14 04:15:11 -07:00
omap3-overo-palo43-common.dtsi
omap3-overo-palo43.dts
omap3-overo-storm-alto35.dts
omap3-overo-storm-chestnut43.dts
omap3-overo-storm-gallop43.dts
omap3-overo-storm-palo35.dts ARM: dts: overo: Add device tree for Palo35 board 2015-07-14 04:15:11 -07:00
omap3-overo-storm-palo43.dts
omap3-overo-storm-summit.dts
omap3-overo-storm-tobi.dts
omap3-overo-storm-tobiduo.dts ARM: dts: Add DTS for Gumstix TobiDuo expansion board 2015-07-14 04:15:10 -07:00
omap3-overo-storm.dtsi
omap3-overo-summit-common.dtsi
omap3-overo-summit.dts
omap3-overo-tobi-common.dtsi
omap3-overo-tobi.dts
omap3-overo-tobiduo-common.dtsi ARM: dts: Add DTS for Gumstix TobiDuo expansion board 2015-07-14 04:15:10 -07:00
omap3-overo-tobiduo.dts ARM: dts: Add DTS for Gumstix TobiDuo expansion board 2015-07-14 04:15:10 -07:00
omap3-overo.dtsi ARM: dts: overo: Enable McBSP2 for all Overo COMs 2015-07-14 04:15:10 -07:00
omap3-pandora-1ghz.dts ARM: dts: omap3-pandora: miscellaneous corrections 2015-07-21 04:07:41 -07:00
omap3-pandora-600mhz.dts ARM: dts: omap3-pandora: miscellaneous corrections 2015-07-21 04:07:41 -07:00
omap3-pandora-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-panel-sharp-ls037v7dw01.dtsi
omap3-sb-t35.dtsi ARM: dts: sbc-t3x30: add audio support 2014-11-24 07:54:48 -08:00
omap3-sbc-t3517.dts ARM: dts: cm-t3x: add NAND support 2015-01-13 08:00:10 -08:00
omap3-sbc-t3530.dts ARM: dts: cm-t3x: add NAND support 2015-01-13 08:00:10 -08:00
omap3-sbc-t3730.dts ARM: dts: cm-t3x: add NAND support 2015-01-13 08:00:10 -08:00
omap3-tao3530.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-thunder.dts
omap3-zoom3.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3.dtsi ARM: dts: fix omap2+ address translation for pbias 2015-09-24 16:28:32 -07:00
omap3xxx-clocks.dtsi ARM: dts: omap3: add minimal l4 bus layout with control module support 2015-03-31 21:26:56 +03:00
omap4-cpu-thermal.dtsi ARM: dts: am57xx-beagle-x15: Add thermal map to include fan and tmp102 2015-03-26 12:02:12 -07:00
omap4-duovero-parlor.dts ARM: dts: Gumstix DuoVero: Bind vdac regulator to hdmi node 2014-11-21 16:08:57 -08:00
omap4-duovero.dtsi ARM: omap: convert wakeupgen to stacked domains 2015-03-15 00:56:13 +00:00
omap4-panda-a4.dts
omap4-panda-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap4-panda-es.dts
omap4-panda.dts
omap4-sdp-es23plus.dts
omap4-sdp.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap4-var-dvk-om44.dts
omap4-var-om44customboard.dtsi
omap4-var-som-om44-wlan.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap4-var-som-om44.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap4-var-stk-om44.dts
omap4.dtsi ARM: dts: fix omap2+ address translation for pbias 2015-09-24 16:28:32 -07:00
omap5-board-common.dtsi ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi 2015-10-16 12:32:32 -07:00
omap5-cm-t54.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap5-core-thermal.dtsi ARM: dts: OMAP5: fix polling intervals for thermal zones 2015-03-06 09:07:17 -08:00
omap5-gpu-thermal.dtsi ARM: dts: OMAP5: fix polling intervals for thermal zones 2015-03-06 09:07:17 -08:00
omap5-igep0050.dts ARM: dts: Add basic support for isee igepv5 2015-10-16 12:32:33 -07:00
omap5-sbc-t54.dts
omap5-uevm.dts ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi 2015-10-16 12:32:32 -07:00
omap5.dtsi ARM: dts: fix omap2+ address translation for pbias 2015-09-24 16:28:32 -07:00
omap24xx-clocks.dtsi ARM: dts: omap24xx: add minimal l4 bus layout with control module support 2015-03-31 21:26:55 +03:00
omap34xx-omap36xx-clocks.dtsi
omap34xx.dtsi Merge branch 'omap/dt' into next/late 2015-04-15 21:41:13 +02:00
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
omap36xx-clocks.dtsi
omap36xx-omap3430es2plus-clocks.dtsi
omap36xx.dtsi Merge branch 'omap/dt' into next/late 2015-04-15 21:41:13 +02:00
omap44xx-clocks.dtsi ARM: dts: omap4.dtsi: remove dss_fck 2014-11-19 16:42:00 -07:00
omap54xx-clocks.dtsi ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and others 2015-03-06 08:36:33 -08:00
omap443x-clocks.dtsi
omap443x.dtsi
omap446x-clocks.dtsi
omap2420-clocks.dtsi
omap2420-h4.dts
omap2420-n8x0-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap2420-n800.dts
omap2420-n810-wimax.dts
omap2420-n810.dts
omap2420.dtsi ARM: dts: omap24xx: add minimal l4 bus layout with control module support 2015-03-31 21:26:55 +03:00
omap2430-clocks.dtsi ARM: dts: omap24xx: add minimal l4 bus layout with control module support 2015-03-31 21:26:55 +03:00
omap2430-sdp.dts ARM: dts: Fix gpmc regression for omap 2430sdp smc91x 2014-12-10 08:26:25 -08:00
omap2430.dtsi ARM: dts: fix omap2+ address translation for pbias 2015-09-24 16:28:32 -07:00
omap3430-sdp.dts
omap3430es1-clocks.dtsi
omap4460.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap-gpmc-smsc911x.dtsi
omap-gpmc-smsc9221.dtsi
omap-zoom-common.dtsi
orion5x-lacie-d2-network.dts
orion5x-lacie-ethernet-disk-mini-v2.dts
orion5x-linkstation-lswtgl.dts ARM: dts: orion5x: add buffalo linkstation ls-wtgl 2015-07-25 16:19:20 +02:00
orion5x-lswsgl.dts ARM: dts: Convert Linkstation Mini to Device Tree 2015-08-06 18:51:29 +02:00
orion5x-maxtor-shared-storage-2.dts
orion5x-mv88f5182.dtsi
orion5x-rd88f5182-nas.dts
orion5x.dtsi
phy3250.dts
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts
prima2-evb.dts
prima2.dtsi ARM: dts: prima2: add resets property for VPP nodes 2014-11-25 18:46:43 +08:00
pxa2xx.dtsi ARM: dts: pxa: add dma pxamci nodes to pxa3xx 2015-07-10 22:29:22 +02:00
pxa3xx.dtsi ARM: dts: pxa: add the usb host controller 2015-07-10 22:29:22 +02:00
pxa27x.dtsi ARM: dts: pxa: fix power i2c definition 2015-07-10 22:29:22 +02:00
pxa168-aspenite.dts
pxa168.dtsi
pxa910-dkb.dts
pxa910.dtsi
qcom-apq8064-cm-qs600.dts ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path 2015-09-09 14:56:50 -05:00
qcom-apq8064-ifc6410.dts ARM: dts: qcom: apq8064-ifc6410: Use stdout-path 2015-09-09 14:56:56 -05:00
qcom-apq8064-v2.0.dtsi
qcom-apq8064.dtsi ARM: dts: apq8064: remove temporary fixed regulator for mmc 2015-07-28 14:57:45 -05:00
qcom-apq8074-dragonboard.dts ARM: dts: qcom: apq8074-dragonboard: Use stdout-path 2015-09-09 14:57:02 -05:00
qcom-apq8084-ifc6540.dts ARM: dts: qcom: apq8084-ifc6540: Use stdout-path 2015-09-09 14:57:17 -05:00
qcom-apq8084-mtp.dts ARM: dts: qcom: apq8084-mtp: Use stdout-path 2015-09-09 14:57:25 -05:00
qcom-apq8084.dtsi ARM: dts: qcom: Label serial nodes for aliasing and stdout-path 2015-09-09 14:56:42 -05:00
qcom-ipq8064-ap148.dts ARM: dts: qcom: ipq8064-ap148: Use stdout-path 2015-09-09 14:57:32 -05:00
qcom-ipq8064-v1.0.dtsi
qcom-ipq8064.dtsi ARM: dts: qcom: Label serial nodes for aliasing and stdout-path 2015-09-09 14:56:42 -05:00
qcom-msm8660-surf.dts ARM: dts: qcom: msm8660-surf: Use stdout-path 2015-09-09 14:57:39 -05:00
qcom-msm8660.dtsi ARM: dts: qcom: Label serial nodes for aliasing and stdout-path 2015-09-09 14:56:42 -05:00
qcom-msm8960-cdp.dts ARM: dts: qcom: msm8960-cdp: Use stdout-path 2015-09-09 14:57:46 -05:00
qcom-msm8960.dtsi ARM: dts: qcom: Label serial nodes for aliasing and stdout-path 2015-09-09 14:56:42 -05:00
qcom-msm8974-sony-xperia-honami.dts ARM: SoC: late fixes and dependencies 2015-09-10 17:59:04 -07:00
qcom-msm8974.dtsi ARM: dts: qcom: Label serial nodes for aliasing and stdout-path 2015-09-09 14:56:42 -05:00
qcom-pm8841.dtsi ARM: dts: qcom: Add PM8841 functions device nodes 2015-04-27 16:11:37 -05:00
qcom-pm8941.dtsi ARM: dts: qcom: Add dts changes for qcom coincell charger 2015-07-29 13:37:18 -07:00
qcom-pma8084.dtsi ARM: dts: qcom: Add PMA8084 functions device nodes 2015-04-27 16:11:38 -05:00
r7s72100-genmai.dts ARM: shmobile: genmai dts: Replace status value "ok" by "okay" 2014-12-21 16:55:31 +09:00
r7s72100.dtsi ARM: shmobile: r7s72100 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:26 +09:00
r8a73a4-ape6evm.dts ARM: shmobile: ape6evm dts: Use generic names for device nodes 2015-05-11 15:01:27 +09:00
r8a73a4.dtsi ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio node 2015-08-05 06:39:27 +09:00
r8a77xx-aa104xd12-panel.dtsi
r8a7740-armadillo800eva.dts ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0 2015-07-06 09:33:34 +09:00
r8a7740.dtsi ARM: shmobile: r8a7740 dtsi: Add missing "gpio-ranges" to gpio node 2015-08-05 06:39:28 +09:00
r8a7778-bockw-reference.dts ARM: shmobile: bockw-reference dts: Replace "nor-jedec" by "jedec,spi-nor" 2015-05-21 10:27:48 +09:00
r8a7778-bockw.dts ARM: shmobile: bockw dts: Replace "nor-jedec" by "jedec,spi-nor" 2015-05-21 10:27:57 +09:00
r8a7778.dtsi ARM: shmobile: r8a7778 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:26 +09:00
r8a7779-marzen.dts ARM: shmobile: marzen dts: Use generic names for device nodes 2015-05-11 15:01:28 +09:00
r8a7779.dtsi ARM: shmobile: r8a7779 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:26 +09:00
r8a7790-lager.dts ARM: shmobile: lager: Fix adv7511 IRQ sensing 2015-07-22 09:31:32 +09:00
r8a7790.dtsi ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:27 +09:00
r8a7791-henninger.dts ARM: shmobile: henninger dts: Replace "nor-jedec" by "jedec,spi-nor" 2015-05-21 10:27:54 +09:00
r8a7791-koelsch.dts ARM: shmobile: koelsch: add sound label on DTS 2015-07-15 09:15:28 +09:00
r8a7791.dtsi ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:27 +09:00
r8a7793-gose.dts ARM: shmobile: r8a7793: add minimal Gose board device tree 2015-07-06 09:33:30 +09:00
r8a7793.dtsi ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:27 +09:00
r8a7794-alt.dts ARM: shmobile: r8a7794: alt: Fix ethernet controller PHY IRQ line 2015-03-01 11:14:51 +09:00
r8a7794-silk.dts ARM: shmobile: silk: add eMMC DT support 2015-08-03 09:52:40 +09:00
r8a7794.dtsi ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:28 +09:00
rk3xxx.dtsi ARM: dts: rockchip: add usb phys to Cortex-A9 socs 2015-08-08 12:25:35 +02:00
rk3066a-bqcurie2.dts ARM: dts: rockchip: add missing device_type = "memory" to boards 2015-07-16 14:21:54 +02:00
rk3066a-marsboard.dts ARM: dts: rockchip: enable usb controller on marsboard 2015-08-08 12:25:38 +02:00
rk3066a-rayeager.dts ARM: dts: rockchip: add usb phys to Cortex-A9 socs 2015-08-08 12:25:35 +02:00
rk3066a.dtsi ARM: dts: rockchip: add usb phys to Cortex-A9 socs 2015-08-08 12:25:35 +02:00
rk3188-radxarock.dts ARM: dts: rockchip: add usb phys to Cortex-A9 socs 2015-08-08 12:25:35 +02:00
rk3188.dtsi ARM: dts: rockchip: add usb phys to Cortex-A9 socs 2015-08-08 12:25:35 +02:00
rk3288-evb-act8846.dts ARM: dts: rockchip: relicense rk3288-evb* under GPLv2/X11 2015-05-15 12:25:54 +02:00
rk3288-evb-rk808.dts ARM: dts: rockchip: relicense rk3288-evb* under GPLv2/X11 2015-05-15 12:25:54 +02:00
rk3288-evb.dtsi ARM: dts: rockchip: add missing device_type = "memory" to boards 2015-07-16 14:21:54 +02:00
rk3288-firefly-beta.dts ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards 2015-01-26 01:15:02 +01:00
rk3288-firefly.dts ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards 2015-01-26 01:15:02 +01:00
rk3288-firefly.dtsi ARM: dts: rockchip: add missing device_type = "memory" to boards 2015-07-16 14:21:54 +02:00
rk3288-popmetal.dts ARM: dts: rockchip: add missing device_type = "memory" to boards 2015-07-16 14:21:54 +02:00
rk3288-r89.dts ARM: dts: rockchip: add missing device_type = "memory" to boards 2015-07-16 14:21:54 +02:00
rk3288-thermal.dtsi ARM: dts: rockchip: relicense rk3288-thermal.dtsi under GPLv2/X11 2015-05-13 22:54:59 +02:00
rk3288-veyron-chromebook.dtsi ARM: dts: rockchip: add shared rk3288-veyron files 2015-07-16 13:38:43 +02:00
rk3288-veyron-jerry.dts ARM: dts: rockchip: correct regulator power states for suspend 2015-08-21 01:40:35 +02:00
rk3288-veyron-minnie.dts ARM: dts: rockchip: correct regulator PM properties 2015-08-21 01:40:28 +02:00
rk3288-veyron-pinky.dts ARM: dts: rockchip: correct regulator power states for suspend 2015-08-21 01:40:35 +02:00
rk3288-veyron-sdmmc.dtsi ARM: dts: rockchip: correct regulator power states for suspend 2015-08-21 01:40:35 +02:00
rk3288-veyron-speedy.dts ARM: dts: rockchip: Add veyron-speedy board 2015-07-23 22:13:46 +02:00
rk3288-veyron.dtsi ARM: dts: Add ddc i2c reference to veyron 2015-09-13 14:21:39 +02:00
rk3288.dtsi ARM: dts: rockchip: reserve unusable memory region on rk3288 2015-08-08 12:28:54 +02:00
s3c24xx.dtsi
s3c64xx-pinctrl.dtsi
s3c64xx.dtsi
s3c2416-pinctrl.dtsi
s3c2416-smdk2416.dts ARM: dts: s3c2416: Use labels for overriding nodes in SMDK2416 2015-06-03 09:56:54 +09:00
s3c2416.dtsi ARM: dts: s3c2416: Add labels to S3C2416 nodes 2015-06-03 09:56:53 +09:00
s3c6400.dtsi
s3c6410-mini6410.dts
s3c6410-smdk6410.dts
s3c6410.dtsi
s5pv210-aquila.dts ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards 2015-01-24 13:24:06 +09:00
s5pv210-goni.dts ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards 2015-01-24 13:24:06 +09:00
s5pv210-pinctrl.dtsi
s5pv210-smdkc110.dts
s5pv210-smdkv210.dts ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards 2015-01-24 13:24:06 +09:00
s5pv210-torbreck.dts
s5pv210.dtsi
sama5d2.dtsi ARM: at91/dt: sama5d2: use slow clock where necessary 2015-08-07 17:33:54 +02:00
sama5d3_can.dtsi ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals 2015-03-04 18:36:10 +01:00
sama5d3_emac.dtsi ARM: DT updates for v4.1 2015-04-22 09:09:46 -07:00
sama5d3_gmac.dtsi ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals 2015-03-04 18:36:10 +01:00
sama5d3_lcd.dtsi ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs 2015-03-23 15:37:35 +01:00
sama5d3_mci2.dtsi ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals 2015-03-04 18:36:10 +01:00
sama5d3_tcb1.dtsi ARM: at91/dt: sama5d3: use slow clock where necessary 2015-08-07 11:58:45 +02:00
sama5d3_uart.dtsi ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals 2015-03-04 18:36:10 +01:00
sama5d3.dtsi ARM: at91/dt: sama5d3: use slow clock where necessary 2015-08-07 11:58:45 +02:00
sama5d3xcm.dtsi ARM: at91/dt: sama5d3xek: use stdout-path 2015-06-04 10:00:39 +02:00
sama5d3xdm.dtsi
sama5d3xmb.dtsi ARM: SoC DT updates 2015-02-17 09:36:52 -08:00
sama5d4.dtsi ARM: at91/dt: sama5d4: use slow clock where necessary 2015-08-07 11:58:48 +02:00
sama5d31.dtsi
sama5d31ek.dts
sama5d33.dtsi
sama5d33ek.dts
sama5d34.dtsi
sama5d34ek.dts
sama5d35.dtsi
sama5d35ek.dts ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not needed 2015-03-04 18:36:11 +01:00
sama5d36.dtsi
sama5d36ek.dts
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g.dts ARM: shmobile: kzm9g dts: Configure the HOME key as wake-up source 2015-05-11 15:01:33 +09:00
sh73a0.dtsi ARM: shmobile: sh73a0 dtsi: Add missing "gpio-ranges" to gpio node 2015-08-05 06:39:28 +09:00
skeleton64.dtsi
skeleton.dtsi
socfpga_arria5_socdk.dts ARM: dts: socfpga: use stdout-path for chosen node 2015-07-20 10:07:50 -05:00
socfpga_arria5.dtsi
socfpga_arria10_socdk_sdmmc.dts ARM: socfpga: dts: rename socdk board file to socdk_sdmmc 2015-05-11 13:14:59 -05:00
socfpga_arria10_socdk.dtsi ARM: dts: socfpga: use stdout-path for chosen node 2015-07-20 10:07:50 -05:00
socfpga_arria10.dtsi SoCFPGA DTS updates for v4.3, take 2 2015-08-13 12:19:38 +02:00
socfpga_cyclone5_de0_sockit.dts ARM: dts: socfpga: Add support of Terasic DE0 Atlas board 2015-07-21 15:41:57 -05:00
socfpga_cyclone5_socdk.dts ARM: dts: socfpga: use stdout-path for chosen node 2015-07-20 10:07:50 -05:00
socfpga_cyclone5_sockit.dts ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
socfpga_cyclone5_socrates.dts ARM: socfpga: socrates: add gpio-leds 2015-06-02 14:27:11 -05:00
socfpga_cyclone5.dtsi arm: dts: socfpga: enable watchdog for socfpga platform 2014-11-20 23:08:39 -06:00
socfpga_vt.dts
socfpga.dtsi SoCFPGA DTS updates for v4.3, take 2 2015-08-13 12:19:38 +02:00
spear3xx.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear13xx.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear300-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear300.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear310-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear310.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear320-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear320-hmi.dts
spear320.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear600-evb.dts
spear600.dtsi
spear1310-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear1310.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear1340-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear1340.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
st-pincfg.h
ste-ccu8540-pinctrl.dtsi
ste-ccu8540.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-ccu9540.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-dbx5x0.dtsi This is the bulk of pin control changes for the v4.3 development 2015-09-04 10:22:09 -07:00
ste-href-ab8500.dtsi
ste-href-ab8505.dtsi
ste-href-family-pinctrl.dtsi
ste-href-stuib.dtsi ARM: ux500: add the sensors to the STUIB board 2015-05-13 12:22:19 +02:00
ste-href-tvk1281618.dtsi ARM: ux500: assign the sensor trigger IRQs 2015-05-13 12:22:18 +02:00
ste-href.dtsi ARM: ux500: fix MMC/SD card regression 2015-07-14 11:15:57 +02:00
ste-hrefprev60-stuib.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-hrefprev60-tvk.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-hrefprev60.dtsi ARM: ux500: fix MMC/SD card regression 2015-07-14 11:15:57 +02:00
ste-hrefv60plus-stuib.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-hrefv60plus-tvk.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-hrefv60plus.dtsi ARM: ux500: fix MMC/SD card regression 2015-07-14 11:15:57 +02:00
ste-nomadik-nhk15.dts ARM: nomadik: push accelerometer down to boards 2015-08-11 15:29:59 +02:00
ste-nomadik-pinctrl.dtsi
ste-nomadik-s8815.dts ARM: nomadik: push accelerometer down to boards 2015-08-11 15:29:59 +02:00
ste-nomadik-stn8815.dtsi This is the bulk of pin control changes for the v4.3 development 2015-09-04 10:22:09 -07:00
ste-snowball.dts ARM: ux500: fix MMC/SD card regression 2015-07-14 11:15:57 +02:00
ste-u300.dts
stih41x-b2000.dtsi
stih41x-b2020.dtsi
stih41x-b2020x.dtsi
stih41x.dtsi
stih407-b2120.dts ARM: STi: DT: STih407: Re-order #include <*.dtsi> files 2015-05-14 17:42:34 +02:00
stih407-clock.dtsi ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x 2015-07-22 11:41:33 +02:00
stih407-family.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
stih407-pinctrl.dtsi ARM: STi: DT: Add STiH407 family mtsin0 pinctrl configuration 2015-07-22 11:03:11 +02:00
stih407.dtsi ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver 2015-09-24 16:50:21 -07:00
stih410-b2120.dts ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc. 2015-04-30 10:31:47 +02:00
stih410-clock.dtsi ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x 2015-07-22 11:41:33 +02:00
stih410-pinctrl.dtsi
stih410.dtsi ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver 2015-09-24 16:50:21 -07:00
stih415-b2000.dts
stih415-b2020.dts
stih415-clock.dtsi
stih415-pinctrl.dtsi
stih415.dtsi ARM: STi: DT: Move reset controller constants into common location 2015-08-03 13:13:44 +02:00
stih416-b2000.dts
stih416-b2020.dts
stih416-b2020e.dts ARM: STi: STiH416-b2020e: Enable PWM on the B2020 Rev-E 2015-05-13 10:41:41 +02:00
stih416-clock.dtsi
stih416-pinctrl.dtsi ARM: STi: STiH416: Add Pinctrl settings for PWM 2015-05-13 10:41:40 +02:00
stih416.dtsi ARM: STi: DT: Move reset controller constants into common location 2015-08-03 13:13:44 +02:00
stih418-b2199.dts ARM: DT: STi: STiH418: Enable USB3 port on stih418-b2199. 2015-05-07 16:40:34 +02:00
stih418-clock.dtsi ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x 2015-07-22 11:41:33 +02:00
stih418.dtsi ARM: STi: DT: STiH418: Add cpu-release-addr dt property. 2015-07-22 11:11:04 +02:00
stihxxx-b2120.dtsi ARM: DT: STi: stihxxx-b2120: Enable USB3 port on stih407-b2120 and stih410-b2120 2015-05-07 16:39:39 +02:00
stm32f429-disco.dts ARM: dts: Use stdout-path in STM32F429 Discovery board 2015-07-23 07:07:12 +02:00
stm32f429.dtsi ARM: dts: stm32f429: Adopt STM32F4 clock driver 2015-07-07 11:20:52 +02:00
stm32429i-eval.dts ARM: dts: Add STM32429i-EVAL board support 2015-07-23 06:59:50 +02:00
sun4i-a10-a1000.dts ARM: dts: sun4i: Add A10 SRAM and SRAM controller 2015-06-01 11:13:26 +02:00
sun4i-a10-ba10-tvbox.dts ARM: dts: sun4i: Enable otg controller on the ba10-tvbox 2015-07-06 13:36:08 +02:00
sun4i-a10-chuwi-v7-cw0825.dts ARM: dts: sun4i: Enable USB DRC on Chuwi V7 CW0825 2015-07-06 13:35:50 +02:00
sun4i-a10-cubieboard.dts ARM: dts: sun4i: Enable USB DRC on the Cubieboard 2015-07-06 13:35:51 +02:00
sun4i-a10-gemei-g9.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun4i-a10-hackberry.dts ARM: dts: sun4i: Add A10 SRAM and SRAM controller 2015-06-01 11:13:26 +02:00
sun4i-a10-hyundai-a7hd.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun4i-a10-inet97fv2.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun4i-a10-itead-iteaduino-plus.dts ARM: dts: sun4i: Add Iteaduino Plus A10 2015-07-21 14:36:58 +02:00
sun4i-a10-jesurun-q5.dts ARM: dts: sun4i: Add A10 SRAM and SRAM controller 2015-06-01 11:13:26 +02:00
sun4i-a10-marsboard.dts ARM: dts: sun4i: Add A10 SRAM and SRAM controller 2015-06-01 11:13:26 +02:00
sun4i-a10-mini-xplus.dts ARM: dts: sun4i: Enable otg controller on the mini-x 2015-07-06 13:36:09 +02:00
sun4i-a10-mk802.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun4i-a10-mk802ii.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun4i-a10-olinuxino-lime.dts ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno Lime 2015-07-31 12:08:44 +02:00
sun4i-a10-pcduino.dts ARM: dts: sun4i: Add A10 SRAM and SRAM controller 2015-06-01 11:13:26 +02:00
sun4i-a10.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
sun5i-a10s-auxtek-t004.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun5i-a10s-mk802.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun5i-a10s-olinuxino-micro.dts ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno Micro 2015-07-31 18:57:25 +02:00
sun5i-a10s-r7-tv-dongle.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun5i-a10s.dtsi ARM: sun5i: Add clock indices 2015-08-12 00:59:04 -07:00
sun5i-a13-hsg-h702.dts ARM: dts: sun5i: hsg-h702: Enable USB OTG controller 2015-07-31 18:59:51 +02:00
sun5i-a13-olinuxino-micro.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun5i-a13-olinuxino.dts ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno 2015-07-31 18:57:48 +02:00
sun5i-a13-utoo-p66.dts ARM: sunxi: dt: Convert users to the PIO interrupts binding 2015-07-28 14:41:50 +02:00
sun5i-a13.dtsi ARM: sun5i: Add clock indices 2015-08-12 00:59:04 -07:00
sun5i.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
sun6i-a31-app4-evb1.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun6i-a31-colombus.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun6i-a31-hummingbird.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun6i-a31-i7.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun6i-a31-m9.dts ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box 2015-06-02 23:39:46 +02:00
sun6i-a31-mele-a1000g-quad.dts ARM: dts: sun6i: Enable USB DRC on the Mele A1000G quad 2015-07-06 13:35:53 +02:00
sun6i-a31.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
sun6i-a31s-cs908.dts ARM: dts: sun6i: Enable otg controller on the cs908 2015-07-06 13:36:10 +02:00
sun6i-a31s.dtsi ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-bananapi.dts ARM: sunxi: dt: Split the SPI pinctrl groups 2015-05-10 10:23:56 +02:00
sun7i-a20-bananapro.dts ARM: dts: sun7i: Add uart4 support for BananaPro, disable uart2 2015-06-01 11:08:29 +02:00
sun7i-a20-cubieboard2.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-cubietruck.dts ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseq 2015-08-01 11:25:11 +02:00
sun7i-a20-hummingbird.dts ARM: sunxi: dt: Split the SPI pinctrl groups 2015-05-10 10:23:56 +02:00
sun7i-a20-i12-tvbox.dts ARM: sunxi: dt: Convert users to the PIO interrupts binding 2015-07-28 14:41:50 +02:00
sun7i-a20-m3.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-mk808c.dts ARM: sun7i: dt: Add new MK808C device 2015-04-29 22:29:55 +02:00
sun7i-a20-olinuxino-lime2.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-olinuxino-lime.dts ARM: dts: sun7i: Enable USB DRC on A20-OLinuxIno-Lime 2015-07-06 13:35:56 +02:00
sun7i-a20-olinuxino-micro.dts ARM: dts: sun7i: Enable USB DRC on A20-OLinuxIno-Micro 2015-07-06 13:35:57 +02:00
sun7i-a20-orangepi-mini.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-orangepi.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-pcduino3-nano.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-pcduino3.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-wexler-tab7200.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
sun8i-a23-a33.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
sun8i-a23-evb.dts ARM: sun8i: Introduce A23 Evaluation Board Support 2015-06-01 11:08:24 +02:00
sun8i-a23-ippo-q8h-v1.2.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun8i-a23-ippo-q8h-v5.dts ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A23 tablets 2015-07-06 13:35:59 +02:00
sun8i-a23.dtsi ARM: dts: sun8i: Add A23 usb-phy and otg nodes 2015-07-06 13:35:46 +02:00
sun8i-a33-et-q8-v1.6.dts ARM: dts: sun8i: Add ET-Q8 A33 support 2015-06-02 09:55:36 +02:00
sun8i-a33-ga10h-v1.1.dts ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets 2015-07-06 13:36:01 +02:00
sun8i-a33-ippo-q8h-v1.2.dts ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tablet 2015-07-31 18:58:13 +02:00
sun8i-a33-sinlinx-sina33.dts ARM: dts: sun8i: sina33: Enable USB hosts 2015-07-06 13:36:02 +02:00
sun8i-a33.dtsi ARM: dts: sun8i: Add A33 usb-phy and otg nodes 2015-07-06 13:35:47 +02:00
sun9i-a80-cubieboard4.dts ARM: dts: add cubietech cubieboard4 2015-04-27 08:20:27 +02:00
sun9i-a80-optimus.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun9i-a80.dtsi ARM: sun9i: Wrap the clock-indices 2015-08-12 00:59:13 -07:00
sunxi-common-regulators.dtsi ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes 2015-07-06 13:36:06 +02:00
tegra20-colibri-512.dtsi
tegra20-harmony.dts
tegra20-iris-512.dts
tegra20-medcom-wide.dts
tegra20-paz00.dts
tegra20-plutux.dts
tegra20-seaboard.dts ARM: tegra: Add missing HDMI +5V regulator 2015-05-04 14:01:55 +02:00
tegra20-tamonten.dtsi
tegra20-tec.dts
tegra20-trimslice.dts
tegra20-ventana.dts
tegra20-whistler.dts
tegra20.dtsi ARM: tegra: Add gpio-ranges property 2015-08-21 18:44:28 +02:00
tegra30-apalis-eval.dts
tegra30-apalis.dtsi
tegra30-beaver.dts ARM: tegra: Use generated pinmux for Beaver board 2015-03-24 10:51:14 +01:00
tegra30-cardhu-a02.dts
tegra30-cardhu-a04.dts
tegra30-cardhu.dtsi ARM: tegra: Cardhu device-tree comment spelling fix 2015-05-05 13:42:56 +02:00
tegra30-colibri-eval-v3.dts
tegra30-colibri.dtsi
tegra30.dtsi ARM: tegra: Add gpio-ranges property 2015-08-21 18:44:28 +02:00
tegra114-dalmore.dts
tegra114-roth.dts
tegra114-tn7.dts
tegra114.dtsi ARM: tegra: Add gpio-ranges property 2015-08-21 18:44:28 +02:00
tegra124-jetson-tk1-emc.dtsi ARM: tegra: Add EMC timings to Jetson TK1 device tree 2015-03-30 11:43:38 +02:00
tegra124-jetson-tk1.dts ARM: tegra: jetson-tk1: Add GK20A GPU DT node 2015-08-21 18:44:27 +02:00
tegra124-nyan-big-emc.dtsi ARM: tegra: Add EMC timings to Nyan Big device tree 2015-03-30 11:43:39 +02:00
tegra124-nyan-big.dts ARM: tegra: Add EMC timings to Nyan Big device tree 2015-03-30 11:43:39 +02:00
tegra124-nyan-blaze-emc.dtsi ARM: tegra: Add EMC timings to Nyan Blaze device tree 2015-03-30 11:43:39 +02:00
tegra124-nyan-blaze.dts ARM: tegra: Add EMC timings to Nyan Blaze device tree 2015-03-30 11:43:39 +02:00
tegra124-nyan.dtsi ARM: tegra: nyan: The WiFi card is kept powered during suspend 2015-03-24 12:36:57 +01:00
tegra124-venice2.dts ARM: tegra: venice2: Add GK20A GPU DT node 2015-08-21 18:44:26 +02:00
tegra124.dtsi ARM: tegra: Add gpio-ranges property 2015-08-21 18:44:28 +02:00
tny_a9g20.dts
tny_a9260_common.dtsi
tny_a9260.dts
tny_a9263.dts
tps6507x.dtsi
tps65217.dtsi
tps65910.dtsi
twl4030_omap3.dtsi
twl4030.dtsi
twl6030_omap4.dtsi
twl6030.dtsi
uniphier-ph1-ld4-ref.dts ARM: dts: UniPhier: add reference daughter board 2015-08-11 15:20:56 +02:00
uniphier-ph1-ld4.dtsi ARM: dts: uniphier: add I2C controller device nodes 2015-08-11 15:09:21 +02:00
uniphier-ph1-ld6b-ref.dts ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support 2015-08-11 15:09:32 +02:00
uniphier-ph1-ld6b.dtsi ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support 2015-08-11 15:09:32 +02:00
uniphier-ph1-pro4-ref.dts ARM: dts: UniPhier: add reference daughter board 2015-08-11 15:20:56 +02:00
uniphier-ph1-pro4.dtsi ARM: dts: uniphier: add I2C controller device nodes 2015-08-11 15:09:21 +02:00
uniphier-ph1-pro5.dtsi ARM: dts: uniphier: add PH1-Pro5 SoC support 2015-08-11 15:09:27 +02:00
uniphier-ph1-sld3-ref.dts ARM: dts: UniPhier: add reference daughter board 2015-08-11 15:20:56 +02:00
uniphier-ph1-sld3.dtsi ARM: dts: uniphier: add I2C controller device nodes 2015-08-11 15:09:21 +02:00
uniphier-ph1-sld8-ref.dts ARM: dts: UniPhier: add reference daughter board 2015-08-11 15:20:56 +02:00
uniphier-ph1-sld8.dtsi ARM: dts: uniphier: add I2C controller device nodes 2015-08-11 15:09:21 +02:00
uniphier-pinctrl.dtsi ARM: dts: uniphier: add I2C controller device nodes 2015-08-11 15:09:21 +02:00
uniphier-proxstream2.dtsi ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes 2015-08-20 18:28:39 -07:00
uniphier-ref-daughter.dtsi ARM: dts: UniPhier: add reference daughter board 2015-08-11 15:20:56 +02:00
uniphier-support-card.dtsi ARM: dts: UniPhier: add support for UniPhier SoCs and boards 2015-05-12 16:56:27 +02:00
usb_a9g20_common.dtsi
usb_a9g20_lpw.dts
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts
usb_a9260_common.dtsi
usb_a9260.dts
usb_a9263.dts
versatile-ab.dts dts: versatile: Add sysregs node 2015-01-29 14:02:16 +01:00
versatile-pb.dts ARM: dts: versatile: add PCI controller binding 2015-01-29 08:33:03 -06:00
vexpress-v2m-rs1.dtsi ARM: dts: vexpress: Use assigned-clock-parents for sp810 2015-08-18 13:17:27 -07:00
vexpress-v2m.dtsi ARM: dts: vexpress: Use assigned-clock-parents for sp810 2015-08-18 13:17:27 -07:00
vexpress-v2p-ca5s.dts
vexpress-v2p-ca9.dts ARM: vexpress/ca9: Add interrupt-affinity to the PMU node 2015-05-12 16:39:43 +02:00
vexpress-v2p-ca15_a7.dts arm: dts: vexpress: add missing CCI PMU device node to TC2 2015-07-08 14:44:55 -07:00
vexpress-v2p-ca15-tc1.dts
vf500-colibri-eval-v3.dts ARM: dts: vf500-colibri: add Colibri VF50 support 2014-11-23 15:08:10 +08:00
vf500-colibri.dtsi ARM: dts: vf500-colibri: add Colibri VF50 support 2014-11-23 15:08:10 +08:00
vf500.dtsi ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) 2015-03-30 16:43:48 +08:00
vf610-colibri-eval-v3.dts ARM: dts: vf500-colibri: add Colibri VF50 support 2014-11-23 15:08:10 +08:00
vf610-colibri.dtsi ARM: dts: vf500-colibri: add Colibri VF50 support 2014-11-23 15:08:10 +08:00
vf610-cosmic.dts ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode. 2015-06-03 15:04:00 +08:00
vf610-pinfunc.h ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode. 2015-06-03 15:04:00 +08:00
vf610-twr.dts ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode. 2015-06-03 15:04:00 +08:00
vf610.dtsi ARM: dts: vf610: create generic base device trees 2014-11-23 15:08:10 +08:00
vf610m4-colibri.dts ARM: dts: add support for Vybrid running on Cortex-M4 2015-05-20 23:08:11 +02:00
vf610m4.dtsi ARM: dts: add support for Vybrid running on Cortex-M4 2015-05-20 23:08:11 +02:00
vf-colibri-eval-v3.dtsi ARM: dts: vf-colibri: define stdout-path property 2015-08-11 23:15:22 +08:00
vf-colibri.dtsi ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode. 2015-06-03 15:04:00 +08:00
vfxxx.dtsi ARM: dts: add property for maximum ADC clock frequencies 2015-08-11 23:15:25 +08:00
vt8500-bv07.dts
vt8500.dtsi
wm8505-ref.dts
wm8505.dtsi
wm8650-mid.dts
wm8650.dtsi
wm8750-apc8750.dts
wm8750.dtsi
wm8850-w70v2.dts
wm8850.dtsi
xenvm-4.2.dts
zx296702-ad1.dts ARM: dts: zx: add an initial zx296702 dts and doc 2015-06-11 16:18:30 -07:00
zx296702.dtsi ARM: dts: zx: add an initial zx296702 dts and doc 2015-06-11 16:18:30 -07:00
zynq-7000.dtsi ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. 2015-08-21 09:10:00 -07:00
zynq-parallella.dts ARM: dts: zynq: Fix stdout-path and bootargs 2015-05-28 08:44:56 +02:00
zynq-zc702.dts ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys 2015-07-31 10:50:06 +02:00
zynq-zc706.dts ARM: dts: zynq: Fix stdout-path and bootargs 2015-05-28 08:44:56 +02:00
zynq-zed.dts ARM: dts: zynq: Fix stdout-path and bootargs 2015-05-28 08:44:56 +02:00
zynq-zybo.dts ARM: dts: zynq: Fix stdout-path and bootargs 2015-05-28 08:44:56 +02:00