linux_dsm_epyc7002/drivers/s390/crypto/ap_queue.c
Harald Freudenberger b1af7528d2 s390/zcrypt: use new state UNBOUND during queue driver rebind
When an alternate driver (vfio-ap) has bound an ap queue and this
binding is revised the ap queue device is in an intermittent
state not bound to any driver. The internal state variable
covered this with the state AP_STATE_BORKED which is also used to
reflect broken devices. When now an ap bus scan runs such a
device is destroyed and on the next scan reconstructed.

So a stress test with high frequency switching the queue driver
between the default and the vfio-ap driver hit this gap and the
queue was removed until the next ap bus scan. This fix now
introduces another state for the in-between condition for a queue
momentary not bound to a driver and so the ap bus scan function
skips this device instead of removing it.

Also some very slight but maybe helpful debug feature messages
come with this patch - in particular a message showing that a
broken card/queue device will get removed.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-13 08:27:44 +01:00

764 lines
19 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright IBM Corp. 2016
* Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
*
* Adjunct processor bus, queue related code.
*/
#define KMSG_COMPONENT "ap"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/init.h>
#include <linux/slab.h>
#include <asm/facility.h>
#include "ap_bus.h"
#include "ap_debug.h"
static void __ap_flush_queue(struct ap_queue *aq);
/**
* ap_queue_enable_interruption(): Enable interruption on an AP queue.
* @qid: The AP queue number
* @ind: the notification indicator byte
*
* Enables interruption on AP queue via ap_aqic(). Based on the return
* value it waits a while and tests the AP queue if interrupts
* have been switched on using ap_test_queue().
*/
static int ap_queue_enable_interruption(struct ap_queue *aq, void *ind)
{
struct ap_queue_status status;
struct ap_qirq_ctrl qirqctrl = { 0 };
qirqctrl.ir = 1;
qirqctrl.isc = AP_ISC;
status = ap_aqic(aq->qid, qirqctrl, ind);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_OTHERWISE_CHANGED:
return 0;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
case AP_RESPONSE_INVALID_ADDRESS:
pr_err("Registering adapter interrupts for AP device %02x.%04x failed\n",
AP_QID_CARD(aq->qid),
AP_QID_QUEUE(aq->qid));
return -EOPNOTSUPP;
case AP_RESPONSE_RESET_IN_PROGRESS:
case AP_RESPONSE_BUSY:
default:
return -EBUSY;
}
}
/**
* __ap_send(): Send message to adjunct processor queue.
* @qid: The AP queue number
* @psmid: The program supplied message identifier
* @msg: The message text
* @length: The message length
* @special: Special Bit
*
* Returns AP queue status structure.
* Condition code 1 on NQAP can't happen because the L bit is 1.
* Condition code 2 on NQAP also means the send is incomplete,
* because a segment boundary was reached. The NQAP is repeated.
*/
static inline struct ap_queue_status
__ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length,
unsigned int special)
{
if (special == 1)
qid |= 0x400000UL;
return ap_nqap(qid, psmid, msg, length);
}
int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length)
{
struct ap_queue_status status;
status = __ap_send(qid, psmid, msg, length, 0);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
return 0;
case AP_RESPONSE_Q_FULL:
case AP_RESPONSE_RESET_IN_PROGRESS:
return -EBUSY;
case AP_RESPONSE_REQ_FAC_NOT_INST:
return -EINVAL;
default: /* Device is gone. */
return -ENODEV;
}
}
EXPORT_SYMBOL(ap_send);
int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
{
struct ap_queue_status status;
if (msg == NULL)
return -EINVAL;
status = ap_dqap(qid, psmid, msg, length);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
return 0;
case AP_RESPONSE_NO_PENDING_REPLY:
if (status.queue_empty)
return -ENOENT;
return -EBUSY;
case AP_RESPONSE_RESET_IN_PROGRESS:
return -EBUSY;
default:
return -ENODEV;
}
}
EXPORT_SYMBOL(ap_recv);
/* State machine definitions and helpers */
static enum ap_wait ap_sm_nop(struct ap_queue *aq)
{
return AP_WAIT_NONE;
}
/**
* ap_sm_recv(): Receive pending reply messages from an AP queue but do
* not change the state of the device.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
static struct ap_queue_status ap_sm_recv(struct ap_queue *aq)
{
struct ap_queue_status status;
struct ap_message *ap_msg;
status = ap_dqap(aq->qid, &aq->reply->psmid,
aq->reply->message, aq->reply->length);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
aq->queue_count--;
if (aq->queue_count > 0)
mod_timer(&aq->timeout,
jiffies + aq->request_timeout);
list_for_each_entry(ap_msg, &aq->pendingq, list) {
if (ap_msg->psmid != aq->reply->psmid)
continue;
list_del_init(&ap_msg->list);
aq->pendingq_count--;
ap_msg->receive(aq, ap_msg, aq->reply);
break;
}
case AP_RESPONSE_NO_PENDING_REPLY:
if (!status.queue_empty || aq->queue_count <= 0)
break;
/* The card shouldn't forget requests but who knows. */
aq->queue_count = 0;
list_splice_init(&aq->pendingq, &aq->requestq);
aq->requestq_count += aq->pendingq_count;
aq->pendingq_count = 0;
break;
default:
break;
}
return status;
}
/**
* ap_sm_read(): Receive pending reply messages from an AP queue.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
static enum ap_wait ap_sm_read(struct ap_queue *aq)
{
struct ap_queue_status status;
if (!aq->reply)
return AP_WAIT_NONE;
status = ap_sm_recv(aq);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
if (aq->queue_count > 0) {
aq->state = AP_STATE_WORKING;
return AP_WAIT_AGAIN;
}
aq->state = AP_STATE_IDLE;
return AP_WAIT_NONE;
case AP_RESPONSE_NO_PENDING_REPLY:
if (aq->queue_count > 0)
return AP_WAIT_INTERRUPT;
aq->state = AP_STATE_IDLE;
return AP_WAIT_NONE;
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/**
* ap_sm_suspend_read(): Receive pending reply messages from an AP queue
* without changing the device state in between. In suspend mode we don't
* allow sending new requests, therefore just fetch pending replies.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE or AP_WAIT_AGAIN
*/
static enum ap_wait ap_sm_suspend_read(struct ap_queue *aq)
{
struct ap_queue_status status;
if (!aq->reply)
return AP_WAIT_NONE;
status = ap_sm_recv(aq);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
if (aq->queue_count > 0)
return AP_WAIT_AGAIN;
/* fall through */
default:
return AP_WAIT_NONE;
}
}
/**
* ap_sm_write(): Send messages from the request queue to an AP queue.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
static enum ap_wait ap_sm_write(struct ap_queue *aq)
{
struct ap_queue_status status;
struct ap_message *ap_msg;
if (aq->requestq_count <= 0)
return AP_WAIT_NONE;
/* Start the next request on the queue. */
ap_msg = list_entry(aq->requestq.next, struct ap_message, list);
status = __ap_send(aq->qid, ap_msg->psmid,
ap_msg->message, ap_msg->length, ap_msg->special);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
aq->queue_count++;
if (aq->queue_count == 1)
mod_timer(&aq->timeout, jiffies + aq->request_timeout);
list_move_tail(&ap_msg->list, &aq->pendingq);
aq->requestq_count--;
aq->pendingq_count++;
if (aq->queue_count < aq->card->queue_depth) {
aq->state = AP_STATE_WORKING;
return AP_WAIT_AGAIN;
}
/* fall through */
case AP_RESPONSE_Q_FULL:
aq->state = AP_STATE_QUEUE_FULL;
return AP_WAIT_INTERRUPT;
case AP_RESPONSE_RESET_IN_PROGRESS:
aq->state = AP_STATE_RESET_WAIT;
return AP_WAIT_TIMEOUT;
case AP_RESPONSE_MESSAGE_TOO_BIG:
case AP_RESPONSE_REQ_FAC_NOT_INST:
list_del_init(&ap_msg->list);
aq->requestq_count--;
ap_msg->rc = -EINVAL;
ap_msg->receive(aq, ap_msg, NULL);
return AP_WAIT_AGAIN;
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/**
* ap_sm_read_write(): Send and receive messages to/from an AP queue.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
static enum ap_wait ap_sm_read_write(struct ap_queue *aq)
{
return min(ap_sm_read(aq), ap_sm_write(aq));
}
/**
* ap_sm_reset(): Reset an AP queue.
* @qid: The AP queue number
*
* Submit the Reset command to an AP queue.
*/
static enum ap_wait ap_sm_reset(struct ap_queue *aq)
{
struct ap_queue_status status;
status = ap_rapq(aq->qid);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_RESET_IN_PROGRESS:
aq->state = AP_STATE_RESET_WAIT;
aq->interrupt = AP_INTR_DISABLED;
return AP_WAIT_TIMEOUT;
case AP_RESPONSE_BUSY:
return AP_WAIT_TIMEOUT;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/**
* ap_sm_reset_wait(): Test queue for completion of the reset operation
* @aq: pointer to the AP queue
*
* Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
*/
static enum ap_wait ap_sm_reset_wait(struct ap_queue *aq)
{
struct ap_queue_status status;
void *lsi_ptr;
if (aq->queue_count > 0 && aq->reply)
/* Try to read a completed message and get the status */
status = ap_sm_recv(aq);
else
/* Get the status with TAPQ */
status = ap_tapq(aq->qid, NULL);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
lsi_ptr = ap_airq_ptr();
if (lsi_ptr && ap_queue_enable_interruption(aq, lsi_ptr) == 0)
aq->state = AP_STATE_SETIRQ_WAIT;
else
aq->state = (aq->queue_count > 0) ?
AP_STATE_WORKING : AP_STATE_IDLE;
return AP_WAIT_AGAIN;
case AP_RESPONSE_BUSY:
case AP_RESPONSE_RESET_IN_PROGRESS:
return AP_WAIT_TIMEOUT;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/**
* ap_sm_setirq_wait(): Test queue for completion of the irq enablement
* @aq: pointer to the AP queue
*
* Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
*/
static enum ap_wait ap_sm_setirq_wait(struct ap_queue *aq)
{
struct ap_queue_status status;
if (aq->queue_count > 0 && aq->reply)
/* Try to read a completed message and get the status */
status = ap_sm_recv(aq);
else
/* Get the status with TAPQ */
status = ap_tapq(aq->qid, NULL);
if (status.irq_enabled == 1) {
/* Irqs are now enabled */
aq->interrupt = AP_INTR_ENABLED;
aq->state = (aq->queue_count > 0) ?
AP_STATE_WORKING : AP_STATE_IDLE;
}
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
if (aq->queue_count > 0)
return AP_WAIT_AGAIN;
/* fallthrough */
case AP_RESPONSE_NO_PENDING_REPLY:
return AP_WAIT_TIMEOUT;
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/*
* AP state machine jump table
*/
static ap_func_t *ap_jumptable[NR_AP_STATES][NR_AP_EVENTS] = {
[AP_STATE_RESET_START] = {
[AP_EVENT_POLL] = ap_sm_reset,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_RESET_WAIT] = {
[AP_EVENT_POLL] = ap_sm_reset_wait,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_SETIRQ_WAIT] = {
[AP_EVENT_POLL] = ap_sm_setirq_wait,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_IDLE] = {
[AP_EVENT_POLL] = ap_sm_write,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_WORKING] = {
[AP_EVENT_POLL] = ap_sm_read_write,
[AP_EVENT_TIMEOUT] = ap_sm_reset,
},
[AP_STATE_QUEUE_FULL] = {
[AP_EVENT_POLL] = ap_sm_read,
[AP_EVENT_TIMEOUT] = ap_sm_reset,
},
[AP_STATE_SUSPEND_WAIT] = {
[AP_EVENT_POLL] = ap_sm_suspend_read,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_UNBOUND] = {
[AP_EVENT_POLL] = ap_sm_nop,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_BORKED] = {
[AP_EVENT_POLL] = ap_sm_nop,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
};
enum ap_wait ap_sm_event(struct ap_queue *aq, enum ap_event event)
{
return ap_jumptable[aq->state][event](aq);
}
enum ap_wait ap_sm_event_loop(struct ap_queue *aq, enum ap_event event)
{
enum ap_wait wait;
while ((wait = ap_sm_event(aq, event)) == AP_WAIT_AGAIN)
;
return wait;
}
/*
* Power management for queue devices
*/
void ap_queue_suspend(struct ap_device *ap_dev)
{
struct ap_queue *aq = to_ap_queue(&ap_dev->device);
/* Poll on the device until all requests are finished. */
spin_lock_bh(&aq->lock);
aq->state = AP_STATE_SUSPEND_WAIT;
while (ap_sm_event(aq, AP_EVENT_POLL) != AP_WAIT_NONE)
;
aq->state = AP_STATE_BORKED;
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_suspend);
void ap_queue_resume(struct ap_device *ap_dev)
{
}
EXPORT_SYMBOL(ap_queue_resume);
/*
* AP queue related attributes.
*/
static ssize_t request_count_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
unsigned int req_cnt;
spin_lock_bh(&aq->lock);
req_cnt = aq->total_request_count;
spin_unlock_bh(&aq->lock);
return snprintf(buf, PAGE_SIZE, "%d\n", req_cnt);
}
static ssize_t request_count_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ap_queue *aq = to_ap_queue(dev);
spin_lock_bh(&aq->lock);
aq->total_request_count = 0;
spin_unlock_bh(&aq->lock);
return count;
}
static DEVICE_ATTR_RW(request_count);
static ssize_t requestq_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
unsigned int reqq_cnt = 0;
spin_lock_bh(&aq->lock);
reqq_cnt = aq->requestq_count;
spin_unlock_bh(&aq->lock);
return snprintf(buf, PAGE_SIZE, "%d\n", reqq_cnt);
}
static DEVICE_ATTR_RO(requestq_count);
static ssize_t pendingq_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
unsigned int penq_cnt = 0;
spin_lock_bh(&aq->lock);
penq_cnt = aq->pendingq_count;
spin_unlock_bh(&aq->lock);
return snprintf(buf, PAGE_SIZE, "%d\n", penq_cnt);
}
static DEVICE_ATTR_RO(pendingq_count);
static ssize_t reset_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
int rc = 0;
spin_lock_bh(&aq->lock);
switch (aq->state) {
case AP_STATE_RESET_START:
case AP_STATE_RESET_WAIT:
rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n");
break;
case AP_STATE_WORKING:
case AP_STATE_QUEUE_FULL:
rc = snprintf(buf, PAGE_SIZE, "Reset Timer armed.\n");
break;
default:
rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
}
spin_unlock_bh(&aq->lock);
return rc;
}
static ssize_t reset_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ap_queue *aq = to_ap_queue(dev);
spin_lock_bh(&aq->lock);
__ap_flush_queue(aq);
aq->state = AP_STATE_RESET_START;
ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
spin_unlock_bh(&aq->lock);
AP_DBF(DBF_INFO, "reset queue=%02x.%04x triggered by user\n",
AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid));
return count;
}
static DEVICE_ATTR_RW(reset);
static ssize_t interrupt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
int rc = 0;
spin_lock_bh(&aq->lock);
if (aq->state == AP_STATE_SETIRQ_WAIT)
rc = snprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
else if (aq->interrupt == AP_INTR_ENABLED)
rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
else
rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
spin_unlock_bh(&aq->lock);
return rc;
}
static DEVICE_ATTR_RO(interrupt);
static struct attribute *ap_queue_dev_attrs[] = {
&dev_attr_request_count.attr,
&dev_attr_requestq_count.attr,
&dev_attr_pendingq_count.attr,
&dev_attr_reset.attr,
&dev_attr_interrupt.attr,
NULL
};
static struct attribute_group ap_queue_dev_attr_group = {
.attrs = ap_queue_dev_attrs
};
static const struct attribute_group *ap_queue_dev_attr_groups[] = {
&ap_queue_dev_attr_group,
NULL
};
static struct device_type ap_queue_type = {
.name = "ap_queue",
.groups = ap_queue_dev_attr_groups,
};
static void ap_queue_device_release(struct device *dev)
{
struct ap_queue *aq = to_ap_queue(dev);
if (!list_empty(&aq->list)) {
spin_lock_bh(&ap_list_lock);
list_del_init(&aq->list);
spin_unlock_bh(&ap_list_lock);
}
kfree(aq);
}
struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type)
{
struct ap_queue *aq;
aq = kzalloc(sizeof(*aq), GFP_KERNEL);
if (!aq)
return NULL;
aq->ap_dev.device.release = ap_queue_device_release;
aq->ap_dev.device.type = &ap_queue_type;
aq->ap_dev.device_type = device_type;
aq->qid = qid;
aq->state = AP_STATE_RESET_START;
aq->interrupt = AP_INTR_DISABLED;
spin_lock_init(&aq->lock);
INIT_LIST_HEAD(&aq->list);
INIT_LIST_HEAD(&aq->pendingq);
INIT_LIST_HEAD(&aq->requestq);
timer_setup(&aq->timeout, ap_request_timeout, 0);
return aq;
}
void ap_queue_init_reply(struct ap_queue *aq, struct ap_message *reply)
{
aq->reply = reply;
spin_lock_bh(&aq->lock);
ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_init_reply);
/**
* ap_queue_message(): Queue a request to an AP device.
* @aq: The AP device to queue the message to
* @ap_msg: The message that is to be added
*/
void ap_queue_message(struct ap_queue *aq, struct ap_message *ap_msg)
{
/* For asynchronous message handling a valid receive-callback
* is required.
*/
BUG_ON(!ap_msg->receive);
spin_lock_bh(&aq->lock);
/* Queue the message. */
list_add_tail(&ap_msg->list, &aq->requestq);
aq->requestq_count++;
aq->total_request_count++;
atomic_inc(&aq->card->total_request_count);
/* Send/receive as many request from the queue as possible. */
ap_wait(ap_sm_event_loop(aq, AP_EVENT_POLL));
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_message);
/**
* ap_cancel_message(): Cancel a crypto request.
* @aq: The AP device that has the message queued
* @ap_msg: The message that is to be removed
*
* Cancel a crypto request. This is done by removing the request
* from the device pending or request queue. Note that the
* request stays on the AP queue. When it finishes the message
* reply will be discarded because the psmid can't be found.
*/
void ap_cancel_message(struct ap_queue *aq, struct ap_message *ap_msg)
{
struct ap_message *tmp;
spin_lock_bh(&aq->lock);
if (!list_empty(&ap_msg->list)) {
list_for_each_entry(tmp, &aq->pendingq, list)
if (tmp->psmid == ap_msg->psmid) {
aq->pendingq_count--;
goto found;
}
aq->requestq_count--;
found:
list_del_init(&ap_msg->list);
}
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_cancel_message);
/**
* __ap_flush_queue(): Flush requests.
* @aq: Pointer to the AP queue
*
* Flush all requests from the request/pending queue of an AP device.
*/
static void __ap_flush_queue(struct ap_queue *aq)
{
struct ap_message *ap_msg, *next;
list_for_each_entry_safe(ap_msg, next, &aq->pendingq, list) {
list_del_init(&ap_msg->list);
aq->pendingq_count--;
ap_msg->rc = -EAGAIN;
ap_msg->receive(aq, ap_msg, NULL);
}
list_for_each_entry_safe(ap_msg, next, &aq->requestq, list) {
list_del_init(&ap_msg->list);
aq->requestq_count--;
ap_msg->rc = -EAGAIN;
ap_msg->receive(aq, ap_msg, NULL);
}
aq->queue_count = 0;
}
void ap_flush_queue(struct ap_queue *aq)
{
spin_lock_bh(&aq->lock);
__ap_flush_queue(aq);
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_flush_queue);
void ap_queue_remove(struct ap_queue *aq)
{
ap_flush_queue(aq);
del_timer_sync(&aq->timeout);
/* reset with zero, also clears irq registration */
spin_lock_bh(&aq->lock);
ap_zapq(aq->qid);
aq->state = AP_STATE_UNBOUND;
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_remove);
void ap_queue_reinit_state(struct ap_queue *aq)
{
spin_lock_bh(&aq->lock);
aq->state = AP_STATE_RESET_START;
ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_reinit_state);