linux_dsm_epyc7002/drivers/soc/aspeed/aspeed-lpc-snoop.c
Jae Hyun Yoo d195e314e8 soc: aspeed: snoop: Add clock control logic
[ Upstream commit 3f94cf15583be554df7aaa651b8ff8e1b68fbe51 ]

If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC
SNOOP block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupt in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.

To prevent this issue, all LPC sub-nodes should enable LCLK
individually so this patch adds clock control logic into the LPC
SNOOP driver.

Fixes: 3772e5da44 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com>
Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04 11:37:29 +01:00

370 lines
9.1 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2017 Google Inc
*
* Provides a simple driver to control the ASPEED LPC snoop interface which
* allows the BMC to listen on and save the data written by
* the host to an arbitrary LPC I/O port.
*
* Typically used by the BMC to "watch" host boot progress via port
* 0x80 writes made by the BIOS during the boot process.
*/
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/kfifo.h>
#include <linux/mfd/syscon.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
#include <linux/regmap.h>
#define DEVICE_NAME "aspeed-lpc-snoop"
#define NUM_SNOOP_CHANNELS 2
#define SNOOP_FIFO_SIZE 2048
#define HICR5 0x0
#define HICR5_EN_SNP0W BIT(0)
#define HICR5_ENINT_SNP0W BIT(1)
#define HICR5_EN_SNP1W BIT(2)
#define HICR5_ENINT_SNP1W BIT(3)
#define HICR6 0x4
#define HICR6_STR_SNP0W BIT(0)
#define HICR6_STR_SNP1W BIT(1)
#define SNPWADR 0x10
#define SNPWADR_CH0_MASK GENMASK(15, 0)
#define SNPWADR_CH0_SHIFT 0
#define SNPWADR_CH1_MASK GENMASK(31, 16)
#define SNPWADR_CH1_SHIFT 16
#define SNPWDR 0x14
#define SNPWDR_CH0_MASK GENMASK(7, 0)
#define SNPWDR_CH0_SHIFT 0
#define SNPWDR_CH1_MASK GENMASK(15, 8)
#define SNPWDR_CH1_SHIFT 8
#define HICRB 0x80
#define HICRB_ENSNP0D BIT(14)
#define HICRB_ENSNP1D BIT(15)
struct aspeed_lpc_snoop_model_data {
/* The ast2400 has bits 14 and 15 as reserved, whereas the ast2500
* can use them.
*/
unsigned int has_hicrb_ensnp;
};
struct aspeed_lpc_snoop_channel {
struct kfifo fifo;
wait_queue_head_t wq;
struct miscdevice miscdev;
};
struct aspeed_lpc_snoop {
struct regmap *regmap;
int irq;
struct clk *clk;
struct aspeed_lpc_snoop_channel chan[NUM_SNOOP_CHANNELS];
};
static struct aspeed_lpc_snoop_channel *snoop_file_to_chan(struct file *file)
{
return container_of(file->private_data,
struct aspeed_lpc_snoop_channel,
miscdev);
}
static ssize_t snoop_file_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
unsigned int copied;
int ret = 0;
if (kfifo_is_empty(&chan->fifo)) {
if (file->f_flags & O_NONBLOCK)
return -EAGAIN;
ret = wait_event_interruptible(chan->wq,
!kfifo_is_empty(&chan->fifo));
if (ret == -ERESTARTSYS)
return -EINTR;
}
ret = kfifo_to_user(&chan->fifo, buffer, count, &copied);
return ret ? ret : copied;
}
static __poll_t snoop_file_poll(struct file *file,
struct poll_table_struct *pt)
{
struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
poll_wait(file, &chan->wq, pt);
return !kfifo_is_empty(&chan->fifo) ? EPOLLIN : 0;
}
static const struct file_operations snoop_fops = {
.owner = THIS_MODULE,
.read = snoop_file_read,
.poll = snoop_file_poll,
.llseek = noop_llseek,
};
/* Save a byte to a FIFO and discard the oldest byte if FIFO is full */
static void put_fifo_with_discard(struct aspeed_lpc_snoop_channel *chan, u8 val)
{
if (!kfifo_initialized(&chan->fifo))
return;
if (kfifo_is_full(&chan->fifo))
kfifo_skip(&chan->fifo);
kfifo_put(&chan->fifo, val);
wake_up_interruptible(&chan->wq);
}
static irqreturn_t aspeed_lpc_snoop_irq(int irq, void *arg)
{
struct aspeed_lpc_snoop *lpc_snoop = arg;
u32 reg, data;
if (regmap_read(lpc_snoop->regmap, HICR6, &reg))
return IRQ_NONE;
/* Check if one of the snoop channels is interrupting */
reg &= (HICR6_STR_SNP0W | HICR6_STR_SNP1W);
if (!reg)
return IRQ_NONE;
/* Ack pending IRQs */
regmap_write(lpc_snoop->regmap, HICR6, reg);
/* Read and save most recent snoop'ed data byte to FIFO */
regmap_read(lpc_snoop->regmap, SNPWDR, &data);
if (reg & HICR6_STR_SNP0W) {
u8 val = (data & SNPWDR_CH0_MASK) >> SNPWDR_CH0_SHIFT;
put_fifo_with_discard(&lpc_snoop->chan[0], val);
}
if (reg & HICR6_STR_SNP1W) {
u8 val = (data & SNPWDR_CH1_MASK) >> SNPWDR_CH1_SHIFT;
put_fifo_with_discard(&lpc_snoop->chan[1], val);
}
return IRQ_HANDLED;
}
static int aspeed_lpc_snoop_config_irq(struct aspeed_lpc_snoop *lpc_snoop,
struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int rc;
lpc_snoop->irq = platform_get_irq(pdev, 0);
if (!lpc_snoop->irq)
return -ENODEV;
rc = devm_request_irq(dev, lpc_snoop->irq,
aspeed_lpc_snoop_irq, IRQF_SHARED,
DEVICE_NAME, lpc_snoop);
if (rc < 0) {
dev_warn(dev, "Unable to request IRQ %d\n", lpc_snoop->irq);
lpc_snoop->irq = 0;
return rc;
}
return 0;
}
static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
struct device *dev,
int channel, u16 lpc_port)
{
int rc = 0;
u32 hicr5_en, snpwadr_mask, snpwadr_shift, hicrb_en;
const struct aspeed_lpc_snoop_model_data *model_data =
of_device_get_match_data(dev);
init_waitqueue_head(&lpc_snoop->chan[channel].wq);
/* Create FIFO datastructure */
rc = kfifo_alloc(&lpc_snoop->chan[channel].fifo,
SNOOP_FIFO_SIZE, GFP_KERNEL);
if (rc)
return rc;
lpc_snoop->chan[channel].miscdev.minor = MISC_DYNAMIC_MINOR;
lpc_snoop->chan[channel].miscdev.name =
devm_kasprintf(dev, GFP_KERNEL, "%s%d", DEVICE_NAME, channel);
lpc_snoop->chan[channel].miscdev.fops = &snoop_fops;
lpc_snoop->chan[channel].miscdev.parent = dev;
rc = misc_register(&lpc_snoop->chan[channel].miscdev);
if (rc)
return rc;
/* Enable LPC snoop channel at requested port */
switch (channel) {
case 0:
hicr5_en = HICR5_EN_SNP0W | HICR5_ENINT_SNP0W;
snpwadr_mask = SNPWADR_CH0_MASK;
snpwadr_shift = SNPWADR_CH0_SHIFT;
hicrb_en = HICRB_ENSNP0D;
break;
case 1:
hicr5_en = HICR5_EN_SNP1W | HICR5_ENINT_SNP1W;
snpwadr_mask = SNPWADR_CH1_MASK;
snpwadr_shift = SNPWADR_CH1_SHIFT;
hicrb_en = HICRB_ENSNP1D;
break;
default:
return -EINVAL;
}
regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en);
regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask,
lpc_port << snpwadr_shift);
if (model_data->has_hicrb_ensnp)
regmap_update_bits(lpc_snoop->regmap, HICRB,
hicrb_en, hicrb_en);
return rc;
}
static void aspeed_lpc_disable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
int channel)
{
switch (channel) {
case 0:
regmap_update_bits(lpc_snoop->regmap, HICR5,
HICR5_EN_SNP0W | HICR5_ENINT_SNP0W,
0);
break;
case 1:
regmap_update_bits(lpc_snoop->regmap, HICR5,
HICR5_EN_SNP1W | HICR5_ENINT_SNP1W,
0);
break;
default:
return;
}
kfifo_free(&lpc_snoop->chan[channel].fifo);
misc_deregister(&lpc_snoop->chan[channel].miscdev);
}
static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
{
struct aspeed_lpc_snoop *lpc_snoop;
struct device *dev;
u32 port;
int rc;
dev = &pdev->dev;
lpc_snoop = devm_kzalloc(dev, sizeof(*lpc_snoop), GFP_KERNEL);
if (!lpc_snoop)
return -ENOMEM;
lpc_snoop->regmap = syscon_node_to_regmap(
pdev->dev.parent->of_node);
if (IS_ERR(lpc_snoop->regmap)) {
dev_err(dev, "Couldn't get regmap\n");
return -ENODEV;
}
dev_set_drvdata(&pdev->dev, lpc_snoop);
rc = of_property_read_u32_index(dev->of_node, "snoop-ports", 0, &port);
if (rc) {
dev_err(dev, "no snoop ports configured\n");
return -ENODEV;
}
lpc_snoop->clk = devm_clk_get(dev, NULL);
if (IS_ERR(lpc_snoop->clk)) {
rc = PTR_ERR(lpc_snoop->clk);
if (rc != -EPROBE_DEFER)
dev_err(dev, "couldn't get clock\n");
return rc;
}
rc = clk_prepare_enable(lpc_snoop->clk);
if (rc) {
dev_err(dev, "couldn't enable clock\n");
return rc;
}
rc = aspeed_lpc_snoop_config_irq(lpc_snoop, pdev);
if (rc)
goto err;
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port);
if (rc)
goto err;
/* Configuration of 2nd snoop channel port is optional */
if (of_property_read_u32_index(dev->of_node, "snoop-ports",
1, &port) == 0) {
rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port);
if (rc) {
aspeed_lpc_disable_snoop(lpc_snoop, 0);
goto err;
}
}
return 0;
err:
clk_disable_unprepare(lpc_snoop->clk);
return rc;
}
static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
{
struct aspeed_lpc_snoop *lpc_snoop = dev_get_drvdata(&pdev->dev);
/* Disable both snoop channels */
aspeed_lpc_disable_snoop(lpc_snoop, 0);
aspeed_lpc_disable_snoop(lpc_snoop, 1);
clk_disable_unprepare(lpc_snoop->clk);
return 0;
}
static const struct aspeed_lpc_snoop_model_data ast2400_model_data = {
.has_hicrb_ensnp = 0,
};
static const struct aspeed_lpc_snoop_model_data ast2500_model_data = {
.has_hicrb_ensnp = 1,
};
static const struct of_device_id aspeed_lpc_snoop_match[] = {
{ .compatible = "aspeed,ast2400-lpc-snoop",
.data = &ast2400_model_data },
{ .compatible = "aspeed,ast2500-lpc-snoop",
.data = &ast2500_model_data },
{ },
};
static struct platform_driver aspeed_lpc_snoop_driver = {
.driver = {
.name = DEVICE_NAME,
.of_match_table = aspeed_lpc_snoop_match,
},
.probe = aspeed_lpc_snoop_probe,
.remove = aspeed_lpc_snoop_remove,
};
module_platform_driver(aspeed_lpc_snoop_driver);
MODULE_DEVICE_TABLE(of, aspeed_lpc_snoop_match);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Robert Lippert <rlippert@google.com>");
MODULE_DESCRIPTION("Linux driver to control Aspeed LPC snoop functionality");