linux_dsm_epyc7002/fs/nilfs2/file.c
Ryusuke Konishi 11475975dd nilfs2: flush disk caches in syncing
There are two cases that the cache flush is needed to avoid data loss
against unexpected hang or power failure.  One is sync file function (i.e.
 nilfs_sync_file) and another is checkpointing ioctl.

This issues a cache flush request to device for such cases if barrier
mount option is enabled, and makes sure data really is on persistent
storage on their completion.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00

172 lines
4.5 KiB
C

/*
* file.c - NILFS regular file handling primitives including fsync().
*
* Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Written by Amagai Yoshiji <amagai@osrg.net>,
* Ryusuke Konishi <ryusuke@osrg.net>
*/
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/writeback.h>
#include "nilfs.h"
#include "segment.h"
int nilfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
{
/*
* Called from fsync() system call
* This is the only entry point that can catch write and synch
* timing for both data blocks and intermediate blocks.
*
* This function should be implemented when the writeback function
* will be implemented.
*/
struct the_nilfs *nilfs;
struct inode *inode = file->f_mapping->host;
int err;
err = filemap_write_and_wait_range(inode->i_mapping, start, end);
if (err)
return err;
mutex_lock(&inode->i_mutex);
if (nilfs_inode_dirty(inode)) {
if (datasync)
err = nilfs_construct_dsync_segment(inode->i_sb, inode,
0, LLONG_MAX);
else
err = nilfs_construct_segment(inode->i_sb);
}
mutex_unlock(&inode->i_mutex);
nilfs = inode->i_sb->s_fs_info;
if (!err && nilfs_test_opt(nilfs, BARRIER)) {
err = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
if (err != -EIO)
err = 0;
}
return err;
}
static int nilfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
{
struct page *page = vmf->page;
struct inode *inode = vma->vm_file->f_dentry->d_inode;
struct nilfs_transaction_info ti;
int ret;
if (unlikely(nilfs_near_disk_full(inode->i_sb->s_fs_info)))
return VM_FAULT_SIGBUS; /* -ENOSPC */
lock_page(page);
if (page->mapping != inode->i_mapping ||
page_offset(page) >= i_size_read(inode) || !PageUptodate(page)) {
unlock_page(page);
return VM_FAULT_NOPAGE; /* make the VM retry the fault */
}
/*
* check to see if the page is mapped already (no holes)
*/
if (PageMappedToDisk(page))
goto mapped;
if (page_has_buffers(page)) {
struct buffer_head *bh, *head;
int fully_mapped = 1;
bh = head = page_buffers(page);
do {
if (!buffer_mapped(bh)) {
fully_mapped = 0;
break;
}
} while (bh = bh->b_this_page, bh != head);
if (fully_mapped) {
SetPageMappedToDisk(page);
goto mapped;
}
}
unlock_page(page);
/*
* fill hole blocks
*/
ret = nilfs_transaction_begin(inode->i_sb, &ti, 1);
/* never returns -ENOMEM, but may return -ENOSPC */
if (unlikely(ret))
return VM_FAULT_SIGBUS;
ret = block_page_mkwrite(vma, vmf, nilfs_get_block);
if (ret != VM_FAULT_LOCKED) {
nilfs_transaction_abort(inode->i_sb);
return ret;
}
nilfs_set_file_dirty(inode, 1 << (PAGE_SHIFT - inode->i_blkbits));
nilfs_transaction_commit(inode->i_sb);
mapped:
wait_on_page_writeback(page);
return VM_FAULT_LOCKED;
}
static const struct vm_operations_struct nilfs_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = nilfs_page_mkwrite,
};
static int nilfs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
file_accessed(file);
vma->vm_ops = &nilfs_file_vm_ops;
vma->vm_flags |= VM_CAN_NONLINEAR;
return 0;
}
/*
* We have mostly NULL's here: the current defaults are ok for
* the nilfs filesystem.
*/
const struct file_operations nilfs_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = generic_file_aio_read,
.aio_write = generic_file_aio_write,
.unlocked_ioctl = nilfs_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = nilfs_compat_ioctl,
#endif /* CONFIG_COMPAT */
.mmap = nilfs_file_mmap,
.open = generic_file_open,
/* .release = nilfs_release_file, */
.fsync = nilfs_sync_file,
.splice_read = generic_file_splice_read,
};
const struct inode_operations nilfs_file_inode_operations = {
.truncate = nilfs_truncate,
.setattr = nilfs_setattr,
.permission = nilfs_permission,
.fiemap = nilfs_fiemap,
};
/* end of file */