AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-25 06:50:52 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
34d9030b5d
linux_dsm_epyc7002/include/linux/mfd/axp20x.h
Chen-Yu Tsai 34d9030b5d mfd: axp20x: Add address extension registers for AXP806 regmap 
The AXP806 supports either master/standalone or slave mode.
Slave mode allows sharing the serial bus, even with multiple
AXP806 which all have the same hardware address.

This is done with extra "serial interface address extension",
or AXP806_BUS_ADDR_EXT, and "register address extension", or
AXP806_REG_ADDR_EXT, registers. The former is read-only, with
1 bit customizable at the factory, and 1 bit depending on the
state of an external pin. The latter is writable. Only when
the these device addressing bits (in the upper 4 bits of the
registers) match, will the device respond to operations on
its other registers.

Add these 2 registers to the regmap so we can access them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-29 08:21:35 +00:00

623 lines
15 KiB
C
Raw Blame History

/*
* Functions and registers to access AXP20X power management chip.
*
* Copyright (C) 2013, Carlo Caione <carlo@caione.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_MFD_AXP20X_H
#define __LINUX_MFD_AXP20X_H
#include <linux/regmap.h>
enum {
AXP152_ID = 0,
AXP202_ID,
AXP209_ID,
AXP221_ID,
AXP223_ID,
AXP288_ID,
AXP806_ID,
AXP809_ID,
NR_AXP20X_VARIANTS,
};
#define AXP20X_DATACACHE(m) (0x04 + (m))
/* Power supply */
#define AXP152_PWR_OP_MODE 0x01
#define AXP152_LDO3456_DC1234_CTRL 0x12
#define AXP152_ALDO_OP_MODE 0x13
#define AXP152_LDO0_CTRL 0x15
#define AXP152_DCDC2_V_OUT 0x23
#define AXP152_DCDC2_V_SCAL 0x25
#define AXP152_DCDC1_V_OUT 0x26
#define AXP152_DCDC3_V_OUT 0x27
#define AXP152_ALDO12_V_OUT 0x28
#define AXP152_DLDO1_V_OUT 0x29
#define AXP152_DLDO2_V_OUT 0x2a
#define AXP152_DCDC4_V_OUT 0x2b
#define AXP152_V_OFF 0x31
#define AXP152_OFF_CTRL 0x32
#define AXP152_PEK_KEY 0x36
#define AXP152_DCDC_FREQ 0x37
#define AXP152_DCDC_MODE 0x80
#define AXP20X_PWR_INPUT_STATUS 0x00
#define AXP20X_PWR_OP_MODE 0x01
#define AXP20X_USB_OTG_STATUS 0x02
#define AXP20X_PWR_OUT_CTRL 0x12
#define AXP20X_DCDC2_V_OUT 0x23
#define AXP20X_DCDC2_LDO3_V_SCAL 0x25
#define AXP20X_DCDC3_V_OUT 0x27
#define AXP20X_LDO24_V_OUT 0x28
#define AXP20X_LDO3_V_OUT 0x29
#define AXP20X_VBUS_IPSOUT_MGMT 0x30
#define AXP20X_V_OFF 0x31
#define AXP20X_OFF_CTRL 0x32
#define AXP20X_CHRG_CTRL1 0x33
#define AXP20X_CHRG_CTRL2 0x34
#define AXP20X_CHRG_BAK_CTRL 0x35
#define AXP20X_PEK_KEY 0x36
#define AXP20X_DCDC_FREQ 0x37
#define AXP20X_V_LTF_CHRG 0x38
#define AXP20X_V_HTF_CHRG 0x39
#define AXP20X_APS_WARN_L1 0x3a
#define AXP20X_APS_WARN_L2 0x3b
#define AXP20X_V_LTF_DISCHRG 0x3c
#define AXP20X_V_HTF_DISCHRG 0x3d
#define AXP22X_PWR_OUT_CTRL1 0x10
#define AXP22X_PWR_OUT_CTRL2 0x12
#define AXP22X_PWR_OUT_CTRL3 0x13
#define AXP22X_DLDO1_V_OUT 0x15
#define AXP22X_DLDO2_V_OUT 0x16
#define AXP22X_DLDO3_V_OUT 0x17
#define AXP22X_DLDO4_V_OUT 0x18
#define AXP22X_ELDO1_V_OUT 0x19
#define AXP22X_ELDO2_V_OUT 0x1a
#define AXP22X_ELDO3_V_OUT 0x1b
#define AXP22X_DC5LDO_V_OUT 0x1c
#define AXP22X_DCDC1_V_OUT 0x21
#define AXP22X_DCDC2_V_OUT 0x22
#define AXP22X_DCDC3_V_OUT 0x23
#define AXP22X_DCDC4_V_OUT 0x24
#define AXP22X_DCDC5_V_OUT 0x25
#define AXP22X_DCDC23_V_RAMP_CTRL 0x27
#define AXP22X_ALDO1_V_OUT 0x28
#define AXP22X_ALDO2_V_OUT 0x29
#define AXP22X_ALDO3_V_OUT 0x2a
#define AXP22X_CHRG_CTRL3 0x35
#define AXP806_STARTUP_SRC 0x00
#define AXP806_CHIP_ID 0x03
#define AXP806_PWR_OUT_CTRL1 0x10
#define AXP806_PWR_OUT_CTRL2 0x11
#define AXP806_DCDCA_V_CTRL 0x12
#define AXP806_DCDCB_V_CTRL 0x13
#define AXP806_DCDCC_V_CTRL 0x14
#define AXP806_DCDCD_V_CTRL 0x15
#define AXP806_DCDCE_V_CTRL 0x16
#define AXP806_ALDO1_V_CTRL 0x17
#define AXP806_ALDO2_V_CTRL 0x18
#define AXP806_ALDO3_V_CTRL 0x19
#define AXP806_DCDC_MODE_CTRL1 0x1a
#define AXP806_DCDC_MODE_CTRL2 0x1b
#define AXP806_DCDC_FREQ_CTRL 0x1c
#define AXP806_BLDO1_V_CTRL 0x20
#define AXP806_BLDO2_V_CTRL 0x21
#define AXP806_BLDO3_V_CTRL 0x22
#define AXP806_BLDO4_V_CTRL 0x23
#define AXP806_CLDO1_V_CTRL 0x24
#define AXP806_CLDO2_V_CTRL 0x25
#define AXP806_CLDO3_V_CTRL 0x26
#define AXP806_VREF_TEMP_WARN_L 0xf3
#define AXP806_BUS_ADDR_EXT 0xfe
#define AXP806_REG_ADDR_EXT 0xff
/* Interrupt */
#define AXP152_IRQ1_EN 0x40
#define AXP152_IRQ2_EN 0x41
#define AXP152_IRQ3_EN 0x42
#define AXP152_IRQ1_STATE 0x48
#define AXP152_IRQ2_STATE 0x49
#define AXP152_IRQ3_STATE 0x4a
#define AXP20X_IRQ1_EN 0x40
#define AXP20X_IRQ2_EN 0x41
#define AXP20X_IRQ3_EN 0x42
#define AXP20X_IRQ4_EN 0x43
#define AXP20X_IRQ5_EN 0x44
#define AXP20X_IRQ6_EN 0x45
#define AXP20X_IRQ1_STATE 0x48
#define AXP20X_IRQ2_STATE 0x49
#define AXP20X_IRQ3_STATE 0x4a
#define AXP20X_IRQ4_STATE 0x4b
#define AXP20X_IRQ5_STATE 0x4c
#define AXP20X_IRQ6_STATE 0x4d
/* ADC */
#define AXP20X_ACIN_V_ADC_H 0x56
#define AXP20X_ACIN_V_ADC_L 0x57
#define AXP20X_ACIN_I_ADC_H 0x58
#define AXP20X_ACIN_I_ADC_L 0x59
#define AXP20X_VBUS_V_ADC_H 0x5a
#define AXP20X_VBUS_V_ADC_L 0x5b
#define AXP20X_VBUS_I_ADC_H 0x5c
#define AXP20X_VBUS_I_ADC_L 0x5d
#define AXP20X_TEMP_ADC_H 0x5e
#define AXP20X_TEMP_ADC_L 0x5f
#define AXP20X_TS_IN_H 0x62
#define AXP20X_TS_IN_L 0x63
#define AXP20X_GPIO0_V_ADC_H 0x64
#define AXP20X_GPIO0_V_ADC_L 0x65
#define AXP20X_GPIO1_V_ADC_H 0x66
#define AXP20X_GPIO1_V_ADC_L 0x67
#define AXP20X_PWR_BATT_H 0x70
#define AXP20X_PWR_BATT_M 0x71
#define AXP20X_PWR_BATT_L 0x72
#define AXP20X_BATT_V_H 0x78
#define AXP20X_BATT_V_L 0x79
#define AXP20X_BATT_CHRG_I_H 0x7a
#define AXP20X_BATT_CHRG_I_L 0x7b
#define AXP20X_BATT_DISCHRG_I_H 0x7c
#define AXP20X_BATT_DISCHRG_I_L 0x7d
#define AXP20X_IPSOUT_V_HIGH_H 0x7e
#define AXP20X_IPSOUT_V_HIGH_L 0x7f
/* Power supply */
#define AXP20X_DCDC_MODE 0x80
#define AXP20X_ADC_EN1 0x82
#define AXP20X_ADC_EN2 0x83
#define AXP20X_ADC_RATE 0x84
#define AXP20X_GPIO10_IN_RANGE 0x85
#define AXP20X_GPIO1_ADC_IRQ_RIS 0x86
#define AXP20X_GPIO1_ADC_IRQ_FAL 0x87
#define AXP20X_TIMER_CTRL 0x8a
#define AXP20X_VBUS_MON 0x8b
#define AXP20X_OVER_TMP 0x8f
#define AXP22X_PWREN_CTRL1 0x8c
#define AXP22X_PWREN_CTRL2 0x8d
/* GPIO */
#define AXP152_GPIO0_CTRL 0x90
#define AXP152_GPIO1_CTRL 0x91
#define AXP152_GPIO2_CTRL 0x92
#define AXP152_GPIO3_CTRL 0x93
#define AXP152_LDOGPIO2_V_OUT 0x96
#define AXP152_GPIO_INPUT 0x97
#define AXP152_PWM0_FREQ_X 0x98
#define AXP152_PWM0_FREQ_Y 0x99
#define AXP152_PWM0_DUTY_CYCLE 0x9a
#define AXP152_PWM1_FREQ_X 0x9b
#define AXP152_PWM1_FREQ_Y 0x9c
#define AXP152_PWM1_DUTY_CYCLE 0x9d
#define AXP20X_GPIO0_CTRL 0x90
#define AXP20X_LDO5_V_OUT 0x91
#define AXP20X_GPIO1_CTRL 0x92
#define AXP20X_GPIO2_CTRL 0x93
#define AXP20X_GPIO20_SS 0x94
#define AXP20X_GPIO3_CTRL 0x95
#define AXP22X_LDO_IO0_V_OUT 0x91
#define AXP22X_LDO_IO1_V_OUT 0x93
#define AXP22X_GPIO_STATE 0x94
#define AXP22X_GPIO_PULL_DOWN 0x95
/* Battery */
#define AXP20X_CHRG_CC_31_24 0xb0
#define AXP20X_CHRG_CC_23_16 0xb1
#define AXP20X_CHRG_CC_15_8 0xb2
#define AXP20X_CHRG_CC_7_0 0xb3
#define AXP20X_DISCHRG_CC_31_24 0xb4
#define AXP20X_DISCHRG_CC_23_16 0xb5
#define AXP20X_DISCHRG_CC_15_8 0xb6
#define AXP20X_DISCHRG_CC_7_0 0xb7
#define AXP20X_CC_CTRL 0xb8
#define AXP20X_FG_RES 0xb9
/* OCV */
#define AXP20X_RDC_H 0xba
#define AXP20X_RDC_L 0xbb
#define AXP20X_OCV(m) (0xc0 + (m))
#define AXP20X_OCV_MAX 0xf
/* AXP22X specific registers */
#define AXP22X_PMIC_ADC_H 0x56
#define AXP22X_PMIC_ADC_L 0x57
#define AXP22X_TS_ADC_H 0x58
#define AXP22X_TS_ADC_L 0x59
#define AXP22X_BATLOW_THRES1 0xe6
/* AXP288 specific registers */
#define AXP288_PMIC_ADC_H 0x56
#define AXP288_PMIC_ADC_L 0x57
#define AXP288_ADC_TS_PIN_CTRL 0x84
#define AXP288_PMIC_ADC_EN 0x84
/* Fuel Gauge */
#define AXP288_FG_RDC1_REG 0xba
#define AXP288_FG_RDC0_REG 0xbb
#define AXP288_FG_OCVH_REG 0xbc
#define AXP288_FG_OCVL_REG 0xbd
#define AXP288_FG_OCV_CURVE_REG 0xc0
#define AXP288_FG_DES_CAP1_REG 0xe0
#define AXP288_FG_DES_CAP0_REG 0xe1
#define AXP288_FG_CC_MTR1_REG 0xe2
#define AXP288_FG_CC_MTR0_REG 0xe3
#define AXP288_FG_OCV_CAP_REG 0xe4
#define AXP288_FG_CC_CAP_REG 0xe5
#define AXP288_FG_LOW_CAP_REG 0xe6
#define AXP288_FG_TUNE0 0xe8
#define AXP288_FG_TUNE1 0xe9
#define AXP288_FG_TUNE2 0xea
#define AXP288_FG_TUNE3 0xeb
#define AXP288_FG_TUNE4 0xec
#define AXP288_FG_TUNE5 0xed
/* Regulators IDs */
enum {
AXP20X_LDO1 = 0,
AXP20X_LDO2,
AXP20X_LDO3,
AXP20X_LDO4,
AXP20X_LDO5,
AXP20X_DCDC2,
AXP20X_DCDC3,
AXP20X_REG_ID_MAX,
};
enum {
AXP22X_DCDC1 = 0,
AXP22X_DCDC2,
AXP22X_DCDC3,
AXP22X_DCDC4,
AXP22X_DCDC5,
AXP22X_DC1SW,
AXP22X_DC5LDO,
AXP22X_ALDO1,
AXP22X_ALDO2,
AXP22X_ALDO3,
AXP22X_ELDO1,
AXP22X_ELDO2,
AXP22X_ELDO3,
AXP22X_DLDO1,
AXP22X_DLDO2,
AXP22X_DLDO3,
AXP22X_DLDO4,
AXP22X_RTC_LDO,
AXP22X_LDO_IO0,
AXP22X_LDO_IO1,
AXP22X_REG_ID_MAX,
};
enum {
AXP806_DCDCA = 0,
AXP806_DCDCB,
AXP806_DCDCC,
AXP806_DCDCD,
AXP806_DCDCE,
AXP806_ALDO1,
AXP806_ALDO2,
AXP806_ALDO3,
AXP806_BLDO1,
AXP806_BLDO2,
AXP806_BLDO3,
AXP806_BLDO4,
AXP806_CLDO1,
AXP806_CLDO2,
AXP806_CLDO3,
AXP806_SW,
AXP806_REG_ID_MAX,
};
enum {
AXP809_DCDC1 = 0,
AXP809_DCDC2,
AXP809_DCDC3,
AXP809_DCDC4,
AXP809_DCDC5,
AXP809_DC1SW,
AXP809_DC5LDO,
AXP809_ALDO1,
AXP809_ALDO2,
AXP809_ALDO3,
AXP809_ELDO1,
AXP809_ELDO2,
AXP809_ELDO3,
AXP809_DLDO1,
AXP809_DLDO2,
AXP809_RTC_LDO,
AXP809_LDO_IO0,
AXP809_LDO_IO1,
AXP809_SW,
AXP809_REG_ID_MAX,
};
/* IRQs */
enum {
AXP152_IRQ_LDO0IN_CONNECT = 1,
AXP152_IRQ_LDO0IN_REMOVAL,
AXP152_IRQ_ALDO0IN_CONNECT,
AXP152_IRQ_ALDO0IN_REMOVAL,
AXP152_IRQ_DCDC1_V_LOW,
AXP152_IRQ_DCDC2_V_LOW,
AXP152_IRQ_DCDC3_V_LOW,
AXP152_IRQ_DCDC4_V_LOW,
AXP152_IRQ_PEK_SHORT,
AXP152_IRQ_PEK_LONG,
AXP152_IRQ_TIMER,
AXP152_IRQ_PEK_RIS_EDGE,
AXP152_IRQ_PEK_FAL_EDGE,
AXP152_IRQ_GPIO3_INPUT,
AXP152_IRQ_GPIO2_INPUT,
AXP152_IRQ_GPIO1_INPUT,
AXP152_IRQ_GPIO0_INPUT,
};
enum {
AXP20X_IRQ_ACIN_OVER_V = 1,
AXP20X_IRQ_ACIN_PLUGIN,
AXP20X_IRQ_ACIN_REMOVAL,
AXP20X_IRQ_VBUS_OVER_V,
AXP20X_IRQ_VBUS_PLUGIN,
AXP20X_IRQ_VBUS_REMOVAL,
AXP20X_IRQ_VBUS_V_LOW,
AXP20X_IRQ_BATT_PLUGIN,
AXP20X_IRQ_BATT_REMOVAL,
AXP20X_IRQ_BATT_ENT_ACT_MODE,
AXP20X_IRQ_BATT_EXIT_ACT_MODE,
AXP20X_IRQ_CHARG,
AXP20X_IRQ_CHARG_DONE,
AXP20X_IRQ_BATT_TEMP_HIGH,
AXP20X_IRQ_BATT_TEMP_LOW,
AXP20X_IRQ_DIE_TEMP_HIGH,
AXP20X_IRQ_CHARG_I_LOW,
AXP20X_IRQ_DCDC1_V_LONG,
AXP20X_IRQ_DCDC2_V_LONG,
AXP20X_IRQ_DCDC3_V_LONG,
AXP20X_IRQ_PEK_SHORT = 22,
AXP20X_IRQ_PEK_LONG,
AXP20X_IRQ_N_OE_PWR_ON,
AXP20X_IRQ_N_OE_PWR_OFF,
AXP20X_IRQ_VBUS_VALID,
AXP20X_IRQ_VBUS_NOT_VALID,
AXP20X_IRQ_VBUS_SESS_VALID,
AXP20X_IRQ_VBUS_SESS_END,
AXP20X_IRQ_LOW_PWR_LVL1,
AXP20X_IRQ_LOW_PWR_LVL2,
AXP20X_IRQ_TIMER,
AXP20X_IRQ_PEK_RIS_EDGE,
AXP20X_IRQ_PEK_FAL_EDGE,
AXP20X_IRQ_GPIO3_INPUT,
AXP20X_IRQ_GPIO2_INPUT,
AXP20X_IRQ_GPIO1_INPUT,
AXP20X_IRQ_GPIO0_INPUT,
};
enum axp22x_irqs {
AXP22X_IRQ_ACIN_OVER_V = 1,
AXP22X_IRQ_ACIN_PLUGIN,
AXP22X_IRQ_ACIN_REMOVAL,
AXP22X_IRQ_VBUS_OVER_V,
AXP22X_IRQ_VBUS_PLUGIN,
AXP22X_IRQ_VBUS_REMOVAL,
AXP22X_IRQ_VBUS_V_LOW,
AXP22X_IRQ_BATT_PLUGIN,
AXP22X_IRQ_BATT_REMOVAL,
AXP22X_IRQ_BATT_ENT_ACT_MODE,
AXP22X_IRQ_BATT_EXIT_ACT_MODE,
AXP22X_IRQ_CHARG,
AXP22X_IRQ_CHARG_DONE,
AXP22X_IRQ_BATT_TEMP_HIGH,
AXP22X_IRQ_BATT_TEMP_LOW,
AXP22X_IRQ_DIE_TEMP_HIGH,
AXP22X_IRQ_PEK_SHORT,
AXP22X_IRQ_PEK_LONG,
AXP22X_IRQ_LOW_PWR_LVL1,
AXP22X_IRQ_LOW_PWR_LVL2,
AXP22X_IRQ_TIMER,
AXP22X_IRQ_PEK_RIS_EDGE,
AXP22X_IRQ_PEK_FAL_EDGE,
AXP22X_IRQ_GPIO1_INPUT,
AXP22X_IRQ_GPIO0_INPUT,
};
enum axp288_irqs {
AXP288_IRQ_VBUS_FALL = 2,
AXP288_IRQ_VBUS_RISE,
AXP288_IRQ_OV,
AXP288_IRQ_FALLING_ALT,
AXP288_IRQ_RISING_ALT,
AXP288_IRQ_OV_ALT,
AXP288_IRQ_DONE = 10,
AXP288_IRQ_CHARGING,
AXP288_IRQ_SAFE_QUIT,
AXP288_IRQ_SAFE_ENTER,
AXP288_IRQ_ABSENT,
AXP288_IRQ_APPEND,
AXP288_IRQ_QWBTU,
AXP288_IRQ_WBTU,
AXP288_IRQ_QWBTO,
AXP288_IRQ_WBTO,
AXP288_IRQ_QCBTU,
AXP288_IRQ_CBTU,
AXP288_IRQ_QCBTO,
AXP288_IRQ_CBTO,
AXP288_IRQ_WL2,
AXP288_IRQ_WL1,
AXP288_IRQ_GPADC,
AXP288_IRQ_OT = 31,
AXP288_IRQ_GPIO0,
AXP288_IRQ_GPIO1,
AXP288_IRQ_POKO,
AXP288_IRQ_POKL,
AXP288_IRQ_POKS,
AXP288_IRQ_POKN,
AXP288_IRQ_POKP,
AXP288_IRQ_TIMER,
AXP288_IRQ_MV_CHNG,
AXP288_IRQ_BC_USB_CHNG,
};
enum axp806_irqs {
AXP806_IRQ_DIE_TEMP_HIGH_LV1,
AXP806_IRQ_DIE_TEMP_HIGH_LV2,
AXP806_IRQ_DCDCA_V_LOW,
AXP806_IRQ_DCDCB_V_LOW,
AXP806_IRQ_DCDCC_V_LOW,
AXP806_IRQ_DCDCD_V_LOW,
AXP806_IRQ_DCDCE_V_LOW,
AXP806_IRQ_PWROK_LONG,
AXP806_IRQ_PWROK_SHORT,
AXP806_IRQ_WAKEUP,
AXP806_IRQ_PWROK_FALL,
AXP806_IRQ_PWROK_RISE,
};
enum axp809_irqs {
AXP809_IRQ_ACIN_OVER_V = 1,
AXP809_IRQ_ACIN_PLUGIN,
AXP809_IRQ_ACIN_REMOVAL,
AXP809_IRQ_VBUS_OVER_V,
AXP809_IRQ_VBUS_PLUGIN,
AXP809_IRQ_VBUS_REMOVAL,
AXP809_IRQ_VBUS_V_LOW,
AXP809_IRQ_BATT_PLUGIN,
AXP809_IRQ_BATT_REMOVAL,
AXP809_IRQ_BATT_ENT_ACT_MODE,
AXP809_IRQ_BATT_EXIT_ACT_MODE,
AXP809_IRQ_CHARG,
AXP809_IRQ_CHARG_DONE,
AXP809_IRQ_BATT_CHG_TEMP_HIGH,
AXP809_IRQ_BATT_CHG_TEMP_HIGH_END,
AXP809_IRQ_BATT_CHG_TEMP_LOW,
AXP809_IRQ_BATT_CHG_TEMP_LOW_END,
AXP809_IRQ_BATT_ACT_TEMP_HIGH,
AXP809_IRQ_BATT_ACT_TEMP_HIGH_END,
AXP809_IRQ_BATT_ACT_TEMP_LOW,
AXP809_IRQ_BATT_ACT_TEMP_LOW_END,
AXP809_IRQ_DIE_TEMP_HIGH,
AXP809_IRQ_LOW_PWR_LVL1,
AXP809_IRQ_LOW_PWR_LVL2,
AXP809_IRQ_TIMER,
AXP809_IRQ_PEK_RIS_EDGE,
AXP809_IRQ_PEK_FAL_EDGE,
AXP809_IRQ_PEK_SHORT,
AXP809_IRQ_PEK_LONG,
AXP809_IRQ_PEK_OVER_OFF,
AXP809_IRQ_GPIO1_INPUT,
AXP809_IRQ_GPIO0_INPUT,
};
#define AXP288_TS_ADC_H 0x58
#define AXP288_TS_ADC_L 0x59
#define AXP288_GP_ADC_H 0x5a
#define AXP288_GP_ADC_L 0x5b
struct axp20x_dev {
struct device *dev;
int irq;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
long variant;
int nr_cells;
struct mfd_cell *cells;
const struct regmap_config *regmap_cfg;
const struct regmap_irq_chip *regmap_irq_chip;
};
#define BATTID_LEN 64
#define OCV_CURVE_SIZE 32
#define MAX_THERM_CURVE_SIZE 25
#define PD_DEF_MIN_TEMP 0
#define PD_DEF_MAX_TEMP 55
struct axp20x_fg_pdata {
char battid[BATTID_LEN + 1];
int design_cap;
int min_volt;
int max_volt;
int max_temp;
int min_temp;
int cap1;
int cap0;
int rdc1;
int rdc0;
int ocv_curve[OCV_CURVE_SIZE];
int tcsz;
int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
};
struct axp20x_chrg_pdata {
int max_cc;
int max_cv;
int def_cc;
int def_cv;
};
struct axp288_extcon_pdata {
/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
struct gpio_desc *gpio_mux_cntl;
};
/* generic helper function for reading 9-16 bit wide regs */
static inline int axp20x_read_variable_width(struct regmap *regmap,
unsigned int reg, unsigned int width)
{
unsigned int reg_val, result;
int err;
err = regmap_read(regmap, reg, &reg_val);
if (err)
return err;
result = reg_val << (width - 8);
err = regmap_read(regmap, reg + 1, &reg_val);
if (err)
return err;
result |= reg_val;
return result;
}
/**
* axp20x_match_device(): Setup axp20x variant related fields
*
* @axp20x: axp20x device to setup (.dev field must be set)
* @dev: device associated with this axp20x device
*
* This lets the axp20x core configure the mfd cells and register maps
* for later use.
*/
int axp20x_match_device(struct axp20x_dev *axp20x);
/**
* axp20x_device_probe(): Probe a configured axp20x device
*
* @axp20x: axp20x device to probe (must be configured)
*
* This function lets the axp20x core register the axp20x mfd devices
* and irqchip. The axp20x device passed in must be fully configured
* with axp20x_match_device, its irq set, and regmap created.
*/
int axp20x_device_probe(struct axp20x_dev *axp20x);
/**
* axp20x_device_probe(): Remove a axp20x device
*
* @axp20x: axp20x device to remove
*
* This tells the axp20x core to remove the associated mfd devices
*/
int axp20x_device_remove(struct axp20x_dev *axp20x);
#endif /* __LINUX_MFD_AXP20X_H */
Reference in New Issue View Git Blame Copy Permalink