linux_dsm_epyc7002/arch/arm/mach-bcmring/dma_device.c
Leo Chen 7c4c2951c0 ARM: 5647/1: bcmring: add bcmring dma.h and dma_device.c
add bcmring dma.h and dma_device.c

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-15 16:01:40 +01:00

594 lines
25 KiB
C

/*****************************************************************************
* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved.
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available at
* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* consent.
*****************************************************************************/
/****************************************************************************/
/**
* @file dma_device.c
*
* @brief private array of DMA_DeviceAttribute_t
*/
/****************************************************************************/
DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
[DMA_DEVICE_MEM_TO_MEM] = /* MEM 2 MEM */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
.name = "mem-to-mem",
.config = {
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
},
},
[DMA_DEVICE_VPM_MEM_TO_MEM] = /* VPM */
{
.flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
.name = "vpm",
.dedicatedController = 0,
.dedicatedChannel = 0,
/* reserve DMA0:0 for VPM */
},
[DMA_DEVICE_NAND_MEM_TO_MEM] = /* NAND */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
.name = "nand",
.config = {
.srcPeripheralPort = 0,
.dstPeripheralPort = 0,
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_6,
},
},
[DMA_DEVICE_PIF_MEM_TO_DEV] = /* PIF TX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
| DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
| DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
.name = "pif_tx",
.dmacPort = {14, 5},
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
/* dstPeripheralPort = 5 or 14 */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
.maxDataPerBlock = 16256,
},
},
[DMA_DEVICE_PIF_DEV_TO_MEM] = /* PIF RX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
| DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
/* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
| DMA_DEVICE_FLAG_PORT_PER_DMAC,
.name = "pif_rx",
.dmacPort = {14, 5},
.config = {
/* srcPeripheralPort = 5 or 14 */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
.maxDataPerBlock = 16256,
},
},
[DMA_DEVICE_I2S0_DEV_TO_MEM] = /* I2S RX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0,
.name = "i2s0_rx",
.config = {
.srcPeripheralPort = 0, /* SRC: I2S0 */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0,
.dstStatusRegisterAddress = 0,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
.blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
},
},
[DMA_DEVICE_I2S0_MEM_TO_DEV] = /* I2S TX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0,
.name = "i2s0_tx",
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.dstPeripheralPort = 1, /* DST: I2S0 */
.srcStatusRegisterAddress = 0,
.dstStatusRegisterAddress = 0,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
},
},
[DMA_DEVICE_I2S1_DEV_TO_MEM] = /* I2S1 RX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA1,
.name = "i2s1_rx",
.config = {
.srcPeripheralPort = 2, /* SRC: I2S1 */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0,
.dstStatusRegisterAddress = 0,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
.blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
},
},
[DMA_DEVICE_I2S1_MEM_TO_DEV] = /* I2S1 TX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA1,
.name = "i2s1_tx",
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.dstPeripheralPort = 3, /* DST: I2S1 */
.srcStatusRegisterAddress = 0,
.dstStatusRegisterAddress = 0,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
},
},
[DMA_DEVICE_ESW_MEM_TO_DEV] = /* ESW TX */
{
.name = "esw_tx",
.flags = DMA_DEVICE_FLAG_IS_DEDICATED,
.dedicatedController = 1,
.dedicatedChannel = 3,
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.dstPeripheralPort = 1, /* DST: ESW (MTP) */
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_DISABLE,
/* DMAx_AHB_SSTATARy */
.srcStatusRegisterAddress = 0x00000000,
/* DMAx_AHB_DSTATARy */
.dstStatusRegisterAddress = 0x30490010,
/* DMAx_AHB_CFGy */
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
/* DMAx_AHB_CTLy */
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
},
},
[DMA_DEVICE_ESW_DEV_TO_MEM] = /* ESW RX */
{
.name = "esw_rx",
.flags = DMA_DEVICE_FLAG_IS_DEDICATED,
.dedicatedController = 1,
.dedicatedChannel = 2,
.config = {
.srcPeripheralPort = 0, /* SRC: ESW (PTM) */
.dstPeripheralPort = 0, /* DST: memory */
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_DISABLE,
/* DMAx_AHB_SSTATARy */
.srcStatusRegisterAddress = 0x30480010,
/* DMAx_AHB_DSTATARy */
.dstStatusRegisterAddress = 0x00000000,
/* DMAx_AHB_CFGy */
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
/* DMAx_AHB_CTLy */
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
},
},
[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] = /* APM Codec A Ingress */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0,
.name = "apm_a_rx",
.config = {
.srcPeripheralPort = 2, /* SRC: Codec A Ingress FIFO */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
},
},
[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] = /* APM Codec A Egress */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0,
.name = "apm_a_tx",
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.dstPeripheralPort = 3, /* DST: Codec A Egress FIFO */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
.blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
},
},
[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] = /* APM Codec B Ingress */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0,
.name = "apm_b_rx",
.config = {
.srcPeripheralPort = 4, /* SRC: Codec B Ingress FIFO */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
},
},
[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] = /* APM Codec B Egress */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0,
.name = "apm_b_tx",
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.dstPeripheralPort = 5, /* DST: Codec B Egress FIFO */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
.blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
},
},
[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] = /* APM Codec C Ingress */
{
.flags = DMA_DEVICE_FLAG_ON_DMA1,
.name = "apm_c_rx",
.config = {
.srcPeripheralPort = 4, /* SRC: Codec C Ingress FIFO */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
},
},
[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] = /* PCM0 RX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0,
.name = "pcm0_rx",
.config = {
.srcPeripheralPort = 12, /* SRC: PCM0 */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0,
.dstStatusRegisterAddress = 0,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
},
},
[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] = /* PCM0 TX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0,
.name = "pcm0_tx",
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.dstPeripheralPort = 13, /* DST: PCM0 */
.srcStatusRegisterAddress = 0,
.dstStatusRegisterAddress = 0,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
.blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
},
},
[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] = /* PCM1 RX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA1,
.name = "pcm1_rx",
.config = {
.srcPeripheralPort = 14, /* SRC: PCM1 */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0,
.dstStatusRegisterAddress = 0,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
.blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
},
},
[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] = /* PCM1 TX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA1,
.name = "pcm1_tx",
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.dstPeripheralPort = 15, /* DST: PCM1 */
.srcStatusRegisterAddress = 0,
.dstStatusRegisterAddress = 0,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
.blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
},
},
[DMA_DEVICE_SPUM_DEV_TO_MEM] = /* SPUM RX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
.name = "spum_rx",
.config = {
.srcPeripheralPort = 6, /* SRC: Codec A Ingress FIFO */
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
/* Busrt size **MUST** be 16 for SPUM to work */
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
/* on the RX side, SPU needs to be the flow controller */
.flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
},
},
[DMA_DEVICE_SPUM_MEM_TO_DEV] = /* SPUM TX */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
.name = "spum_tx",
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.dstPeripheralPort = 7, /* DST: SPUM */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
.blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
/* Busrt size **MUST** be 16 for SPUM to work */
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
.transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
},
},
[DMA_DEVICE_MEM_TO_VRAM] = /* MEM 2 VRAM */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
.name = "mem-to-vram",
.config = {
.srcPeripheralPort = 0, /* SRC: memory */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
},
},
[DMA_DEVICE_VRAM_TO_MEM] = /* VRAM 2 MEM */
{
.flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
.name = "vram-to-mem",
.config = {
.dstPeripheralPort = 0, /* DST: memory */
.srcStatusRegisterAddress = 0x00000000,
.dstStatusRegisterAddress = 0x00000000,
.srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
.dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
.transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
.srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
.dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
.completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
.errorInterrupt = dmacHw_INTERRUPT_ENABLE,
.channelPriority = dmacHw_CHANNEL_PRIORITY_7,
.srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
.dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
.srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
.dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
},
},
};
EXPORT_SYMBOL(DMA_gDeviceAttribute); /* primarily for dma-test.c */