mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 12:56:54 +07:00
cfe4fbfb23
Signed-off-by: Helge Deller <deller@gmx.de>
499 lines
14 KiB
C
499 lines
14 KiB
C
/* National Semiconductor NS87560UBD Super I/O controller used in
|
|
* HP [BCJ]x000 workstations.
|
|
*
|
|
* This chip is a horrid piece of engineering, and National
|
|
* denies any knowledge of its existence. Thus no datasheet is
|
|
* available off www.national.com.
|
|
*
|
|
* (C) Copyright 2000 Linuxcare, Inc.
|
|
* (C) Copyright 2000 Linuxcare Canada, Inc.
|
|
* (C) Copyright 2000 Martin K. Petersen <mkp@linuxcare.com>
|
|
* (C) Copyright 2000 Alex deVries <alex@onefishtwo.ca>
|
|
* (C) Copyright 2001 John Marvin <jsm fc hp com>
|
|
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
|
|
* (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
|
|
* (C) Copyright 2006 Helge Deller <deller@gmx.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* The initial version of this is by Martin Peterson. Alex deVries
|
|
* has spent a bit of time trying to coax it into working.
|
|
*
|
|
* Major changes to get basic interrupt infrastructure working to
|
|
* hopefully be able to support all SuperIO devices. Currently
|
|
* works with serial. -- John Marvin <jsm@fc.hp.com>
|
|
*
|
|
* Converted superio_init() to be a PCI_FIXUP_FINAL callee.
|
|
* -- Kyle McMartin <kyle@parisc-linux.org>
|
|
*/
|
|
|
|
|
|
/* NOTES:
|
|
*
|
|
* Function 0 is an IDE controller. It is identical to a PC87415 IDE
|
|
* controller (and identifies itself as such).
|
|
*
|
|
* Function 1 is a "Legacy I/O" controller. Under this function is a
|
|
* whole mess of legacy I/O peripherals. Of course, HP hasn't enabled
|
|
* all the functionality in hardware, but the following is available:
|
|
*
|
|
* Two 16550A compatible serial controllers
|
|
* An IEEE 1284 compatible parallel port
|
|
* A floppy disk controller
|
|
*
|
|
* Function 2 is a USB controller.
|
|
*
|
|
* We must be incredibly careful during initialization. Since all
|
|
* interrupts are routed through function 1 (which is not allowed by
|
|
* the PCI spec), we need to program the PICs on the legacy I/O port
|
|
* *before* we attempt to set up IDE and USB. @#$!&
|
|
*
|
|
* According to HP, devices are only enabled by firmware if they have
|
|
* a physical device connected.
|
|
*
|
|
* Configuration register bits:
|
|
* 0x5A: FDC, SP1, IDE1, SP2, IDE2, PAR, Reserved, P92
|
|
* 0x5B: RTC, 8259, 8254, DMA1, DMA2, KBC, P61, APM
|
|
*
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/parport.h>
|
|
#include <linux/parport_pc.h>
|
|
#include <linux/termios.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/superio.h>
|
|
|
|
static struct superio_device sio_dev;
|
|
|
|
|
|
#undef DEBUG_SUPERIO_INIT
|
|
|
|
#ifdef DEBUG_SUPERIO_INIT
|
|
#define DBG_INIT(x...) printk(x)
|
|
#else
|
|
#define DBG_INIT(x...)
|
|
#endif
|
|
|
|
#define SUPERIO "SuperIO"
|
|
#define PFX SUPERIO ": "
|
|
|
|
static irqreturn_t
|
|
superio_interrupt(int parent_irq, void *devp)
|
|
{
|
|
u8 results;
|
|
u8 local_irq;
|
|
|
|
/* Poll the 8259 to see if there's an interrupt. */
|
|
outb (OCW3_POLL,IC_PIC1+0);
|
|
|
|
results = inb(IC_PIC1+0);
|
|
|
|
/*
|
|
* Bit 7: 1 = active Interrupt; 0 = no Interrupt pending
|
|
* Bits 6-3: zero
|
|
* Bits 2-0: highest priority, active requesting interrupt ID (0-7)
|
|
*/
|
|
if ((results & 0x80) == 0) {
|
|
/* I suspect "spurious" interrupts are from unmasking an IRQ.
|
|
* We don't know if an interrupt was/is pending and thus
|
|
* just call the handler for that IRQ as if it were pending.
|
|
*/
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* Check to see which device is interrupting */
|
|
local_irq = results & 0x0f;
|
|
|
|
if (local_irq == 2 || local_irq > 7) {
|
|
printk(KERN_ERR PFX "slave interrupted!\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (local_irq == 7) {
|
|
|
|
/* Could be spurious. Check in service bits */
|
|
|
|
outb(OCW3_ISR,IC_PIC1+0);
|
|
results = inb(IC_PIC1+0);
|
|
if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */
|
|
printk(KERN_WARNING PFX "spurious interrupt!\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* Call the appropriate device's interrupt */
|
|
generic_handle_irq(local_irq);
|
|
|
|
/* set EOI - forces a new interrupt if a lower priority device
|
|
* still needs service.
|
|
*/
|
|
outb((OCW2_SEOI|local_irq),IC_PIC1 + 0);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Initialize Super I/O device */
|
|
static void
|
|
superio_init(struct pci_dev *pcidev)
|
|
{
|
|
struct superio_device *sio = &sio_dev;
|
|
struct pci_dev *pdev = sio->lio_pdev;
|
|
u16 word;
|
|
int ret;
|
|
|
|
if (sio->suckyio_irq_enabled)
|
|
return;
|
|
|
|
BUG_ON(!pdev);
|
|
BUG_ON(!sio->usb_pdev);
|
|
|
|
/* use the IRQ iosapic found for USB INT D... */
|
|
pdev->irq = sio->usb_pdev->irq;
|
|
|
|
/* ...then properly fixup the USB to point at suckyio PIC */
|
|
sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
|
|
|
|
printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i)\n",
|
|
pci_name(pdev), pdev->irq);
|
|
|
|
pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
|
|
sio->sp1_base &= ~1;
|
|
printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
|
|
|
|
pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base);
|
|
sio->sp2_base &= ~1;
|
|
printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
|
|
|
|
pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base);
|
|
sio->pp_base &= ~1;
|
|
printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
|
|
|
|
pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base);
|
|
sio->fdc_base &= ~1;
|
|
printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
|
|
pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base);
|
|
sio->acpi_base &= ~1;
|
|
printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
|
|
|
|
request_region (IC_PIC1, 0x1f, "pic1");
|
|
request_region (IC_PIC2, 0x1f, "pic2");
|
|
request_region (sio->acpi_base, 0x1f, "acpi");
|
|
|
|
/* Enable the legacy I/O function */
|
|
pci_read_config_word (pdev, PCI_COMMAND, &word);
|
|
word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
|
|
pci_write_config_word (pdev, PCI_COMMAND, word);
|
|
|
|
pci_set_master (pdev);
|
|
ret = pci_enable_device(pdev);
|
|
BUG_ON(ret < 0); /* not too much we can do about this... */
|
|
|
|
/*
|
|
* Next project is programming the onboard interrupt controllers.
|
|
* PDC hasn't done this for us, since it's using polled I/O.
|
|
*
|
|
* XXX Use dword writes to avoid bugs in Elroy or Suckyio Config
|
|
* space access. PCI is by nature a 32-bit bus and config
|
|
* space can be sensitive to that.
|
|
*/
|
|
|
|
/* 0x64 - 0x67 :
|
|
DMA Rtg 2
|
|
DMA Rtg 3
|
|
DMA Chan Ctl
|
|
TRIGGER_1 == 0x82 USB & IDE level triggered, rest to edge
|
|
*/
|
|
pci_write_config_dword (pdev, 0x64, 0x82000000U);
|
|
|
|
/* 0x68 - 0x6b :
|
|
TRIGGER_2 == 0x00 all edge triggered (not used)
|
|
CFG_IR_SER == 0x43 SerPort1 = IRQ3, SerPort2 = IRQ4
|
|
CFG_IR_PF == 0x65 ParPort = IRQ5, FloppyCtlr = IRQ6
|
|
CFG_IR_IDE == 0x07 IDE1 = IRQ7, reserved
|
|
*/
|
|
pci_write_config_dword (pdev, TRIGGER_2, 0x07654300U);
|
|
|
|
/* 0x6c - 0x6f :
|
|
CFG_IR_INTAB == 0x00
|
|
CFG_IR_INTCD == 0x10 USB = IRQ1
|
|
CFG_IR_PS2 == 0x00
|
|
CFG_IR_FXBUS == 0x00
|
|
*/
|
|
pci_write_config_dword (pdev, CFG_IR_INTAB, 0x00001000U);
|
|
|
|
/* 0x70 - 0x73 :
|
|
CFG_IR_USB == 0x00 not used. USB is connected to INTD.
|
|
CFG_IR_ACPI == 0x00 not used.
|
|
DMA Priority == 0x4c88 Power on default value. NFC.
|
|
*/
|
|
pci_write_config_dword (pdev, CFG_IR_USB, 0x4c880000U);
|
|
|
|
/* PIC1 Initialization Command Word register programming */
|
|
outb (0x11,IC_PIC1+0); /* ICW1: ICW4 write req | ICW1 */
|
|
outb (0x00,IC_PIC1+1); /* ICW2: interrupt vector table - not used */
|
|
outb (0x04,IC_PIC1+1); /* ICW3: Cascade */
|
|
outb (0x01,IC_PIC1+1); /* ICW4: x86 mode */
|
|
|
|
/* PIC1 Program Operational Control Words */
|
|
outb (0xff,IC_PIC1+1); /* OCW1: Mask all interrupts */
|
|
outb (0xc2,IC_PIC1+0); /* OCW2: priority (3-7,0-2) */
|
|
|
|
/* PIC2 Initialization Command Word register programming */
|
|
outb (0x11,IC_PIC2+0); /* ICW1: ICW4 write req | ICW1 */
|
|
outb (0x00,IC_PIC2+1); /* ICW2: N/A */
|
|
outb (0x02,IC_PIC2+1); /* ICW3: Slave ID code */
|
|
outb (0x01,IC_PIC2+1); /* ICW4: x86 mode */
|
|
|
|
/* Program Operational Control Words */
|
|
outb (0xff,IC_PIC1+1); /* OCW1: Mask all interrupts */
|
|
outb (0x68,IC_PIC1+0); /* OCW3: OCW3 select | ESMM | SMM */
|
|
|
|
/* Write master mask reg */
|
|
outb (0xff,IC_PIC1+1);
|
|
|
|
/* Setup USB power regulation */
|
|
outb(1, sio->acpi_base + USB_REG_CR);
|
|
if (inb(sio->acpi_base + USB_REG_CR) & 1)
|
|
printk(KERN_INFO PFX "USB regulator enabled\n");
|
|
else
|
|
printk(KERN_ERR PFX "USB regulator not initialized!\n");
|
|
|
|
if (request_irq(pdev->irq, superio_interrupt, 0,
|
|
SUPERIO, (void *)sio)) {
|
|
|
|
printk(KERN_ERR PFX "could not get irq\n");
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
sio->suckyio_irq_enabled = 1;
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init);
|
|
|
|
static void superio_mask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
u8 r8;
|
|
|
|
if ((irq < 1) || (irq == 2) || (irq > 7)) {
|
|
printk(KERN_ERR PFX "Illegal irq number.\n");
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
/* Mask interrupt */
|
|
|
|
r8 = inb(IC_PIC1+1);
|
|
r8 |= (1 << irq);
|
|
outb (r8,IC_PIC1+1);
|
|
}
|
|
|
|
static void superio_unmask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int irq = d->irq;
|
|
u8 r8;
|
|
|
|
if ((irq < 1) || (irq == 2) || (irq > 7)) {
|
|
printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
|
|
BUG();
|
|
return;
|
|
}
|
|
|
|
/* Unmask interrupt */
|
|
r8 = inb(IC_PIC1+1);
|
|
r8 &= ~(1 << irq);
|
|
outb (r8,IC_PIC1+1);
|
|
}
|
|
|
|
static struct irq_chip superio_interrupt_type = {
|
|
.name = SUPERIO,
|
|
.irq_unmask = superio_unmask_irq,
|
|
.irq_mask = superio_mask_irq,
|
|
};
|
|
|
|
#ifdef DEBUG_SUPERIO_INIT
|
|
static unsigned short expected_device[3] = {
|
|
PCI_DEVICE_ID_NS_87415,
|
|
PCI_DEVICE_ID_NS_87560_LIO,
|
|
PCI_DEVICE_ID_NS_87560_USB
|
|
};
|
|
#endif
|
|
|
|
int superio_fixup_irq(struct pci_dev *pcidev)
|
|
{
|
|
int local_irq, i;
|
|
|
|
#ifdef DEBUG_SUPERIO_INIT
|
|
int fn;
|
|
fn = PCI_FUNC(pcidev->devfn);
|
|
|
|
/* Verify the function number matches the expected device id. */
|
|
if (expected_device[fn] != pcidev->device) {
|
|
BUG();
|
|
return -1;
|
|
}
|
|
printk(KERN_DEBUG "superio_fixup_irq(%s) ven 0x%x dev 0x%x from %ps\n",
|
|
pci_name(pcidev),
|
|
pcidev->vendor, pcidev->device,
|
|
__builtin_return_address(0));
|
|
#endif
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
irq_set_chip_and_handler(i, &superio_interrupt_type,
|
|
handle_simple_irq);
|
|
}
|
|
|
|
/*
|
|
* We don't allocate a SuperIO irq for the legacy IO function,
|
|
* since it is a "bridge". Instead, we will allocate irq's for
|
|
* each legacy device as they are initialized.
|
|
*/
|
|
|
|
switch(pcidev->device) {
|
|
case PCI_DEVICE_ID_NS_87415: /* Function 0 */
|
|
local_irq = IDE_IRQ;
|
|
break;
|
|
case PCI_DEVICE_ID_NS_87560_LIO: /* Function 1 */
|
|
sio_dev.lio_pdev = pcidev; /* save for superio_init() */
|
|
return -1;
|
|
case PCI_DEVICE_ID_NS_87560_USB: /* Function 2 */
|
|
sio_dev.usb_pdev = pcidev; /* save for superio_init() */
|
|
local_irq = USB_IRQ;
|
|
break;
|
|
default:
|
|
local_irq = -1;
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
return local_irq;
|
|
}
|
|
|
|
static void __init superio_serial_init(void)
|
|
{
|
|
#ifdef CONFIG_SERIAL_8250
|
|
int retval;
|
|
struct uart_port serial_port;
|
|
|
|
memset(&serial_port, 0, sizeof(serial_port));
|
|
serial_port.iotype = UPIO_PORT;
|
|
serial_port.type = PORT_16550A;
|
|
serial_port.uartclk = 115200*16;
|
|
serial_port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE |
|
|
UPF_BOOT_AUTOCONF;
|
|
|
|
/* serial port #1 */
|
|
serial_port.iobase = sio_dev.sp1_base;
|
|
serial_port.irq = SP1_IRQ;
|
|
serial_port.line = 0;
|
|
retval = early_serial_setup(&serial_port);
|
|
if (retval < 0) {
|
|
printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
|
|
return;
|
|
}
|
|
|
|
/* serial port #2 */
|
|
serial_port.iobase = sio_dev.sp2_base;
|
|
serial_port.irq = SP2_IRQ;
|
|
serial_port.line = 1;
|
|
retval = early_serial_setup(&serial_port);
|
|
if (retval < 0)
|
|
printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
|
|
#endif /* CONFIG_SERIAL_8250 */
|
|
}
|
|
|
|
|
|
static void __init superio_parport_init(void)
|
|
{
|
|
#ifdef CONFIG_PARPORT_PC
|
|
if (!parport_pc_probe_port(sio_dev.pp_base,
|
|
0 /*base_hi*/,
|
|
PAR_IRQ,
|
|
PARPORT_DMA_NONE /* dma */,
|
|
NULL /*struct pci_dev* */,
|
|
0 /* shared irq flags */))
|
|
|
|
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
|
|
#endif /* CONFIG_PARPORT_PC */
|
|
}
|
|
|
|
|
|
static void superio_fixup_pci(struct pci_dev *pdev)
|
|
{
|
|
u8 prog;
|
|
|
|
pdev->class |= 0x5;
|
|
pci_write_config_byte(pdev, PCI_CLASS_PROG, pdev->class);
|
|
|
|
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
|
|
printk("PCI: Enabled native mode for NS87415 (pif=0x%x)\n", prog);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
|
|
|
|
|
|
static int __init
|
|
superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct superio_device *sio = &sio_dev;
|
|
|
|
/*
|
|
** superio_probe(00:0e.0) ven 0x100b dev 0x2 sv 0x0 sd 0x0 class 0x1018a
|
|
** superio_probe(00:0e.1) ven 0x100b dev 0xe sv 0x0 sd 0x0 class 0x68000
|
|
** superio_probe(00:0e.2) ven 0x100b dev 0x12 sv 0x0 sd 0x0 class 0xc0310
|
|
*/
|
|
DBG_INIT("superio_probe(%s) ven 0x%x dev 0x%x sv 0x%x sd 0x%x class 0x%x\n",
|
|
pci_name(dev),
|
|
dev->vendor, dev->device,
|
|
dev->subsystem_vendor, dev->subsystem_device,
|
|
dev->class);
|
|
|
|
BUG_ON(!sio->suckyio_irq_enabled); /* Enabled by PCI_FIXUP_FINAL */
|
|
|
|
if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */
|
|
superio_parport_init();
|
|
superio_serial_init();
|
|
/* REVISIT XXX : superio_fdc_init() ? */
|
|
return 0;
|
|
} else if (dev->device == PCI_DEVICE_ID_NS_87415) { /* Function 0 */
|
|
DBG_INIT("superio_probe: ignoring IDE 87415\n");
|
|
} else if (dev->device == PCI_DEVICE_ID_NS_87560_USB) { /* Function 2 */
|
|
DBG_INIT("superio_probe: ignoring USB OHCI controller\n");
|
|
} else {
|
|
DBG_INIT("superio_probe: WTF? Fire Extinguisher?\n");
|
|
}
|
|
|
|
/* Let appropriate other driver claim this device. */
|
|
return -ENODEV;
|
|
}
|
|
|
|
static const struct pci_device_id superio_tbl[] __initconst = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },
|
|
{ 0, }
|
|
};
|
|
|
|
static struct pci_driver superio_driver __refdata = {
|
|
.name = SUPERIO,
|
|
.id_table = superio_tbl,
|
|
.probe = superio_probe,
|
|
};
|
|
|
|
module_pci_driver(superio_driver);
|