mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1373 lines
36 KiB
Plaintext
1373 lines
36 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
#include <dt-bindings/clock/tegra210-car.h>
|
|
#include <dt-bindings/gpio/tegra-gpio.h>
|
|
#include <dt-bindings/memory/tegra210-mc.h>
|
|
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/thermal/tegra124-soctherm.h>
|
|
|
|
/ {
|
|
compatible = "nvidia,tegra210";
|
|
interrupt-parent = <&lic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
pcie@1003000 {
|
|
compatible = "nvidia,tegra210-pcie";
|
|
device_type = "pci";
|
|
reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
|
|
0x0 0x01003800 0x0 0x00000800 /* AFI registers */
|
|
0x0 0x02000000 0x0 0x10000000>; /* configuration space */
|
|
reg-names = "pads", "afi", "cs";
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
|
|
interrupt-names = "intr", "msi";
|
|
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
bus-range = <0x00 0xff>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
|
|
0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
|
|
0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
|
|
0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
|
|
0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
|
|
|
|
clocks = <&tegra_car TEGRA210_CLK_PCIE>,
|
|
<&tegra_car TEGRA210_CLK_AFI>,
|
|
<&tegra_car TEGRA210_CLK_PLL_E>,
|
|
<&tegra_car TEGRA210_CLK_CML0>;
|
|
clock-names = "pex", "afi", "pll_e", "cml";
|
|
resets = <&tegra_car 70>,
|
|
<&tegra_car 72>,
|
|
<&tegra_car 74>;
|
|
reset-names = "pex", "afi", "pcie_x";
|
|
status = "disabled";
|
|
|
|
pci@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
|
|
reg = <0x000800 0 0 0 0>;
|
|
bus-range = <0x00 0xff>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <4>;
|
|
};
|
|
|
|
pci@2,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
|
|
reg = <0x001000 0 0 0 0>;
|
|
bus-range = <0x00 0xff>;
|
|
status = "disabled";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
nvidia,num-lanes = <1>;
|
|
};
|
|
};
|
|
|
|
host1x@50000000 {
|
|
compatible = "nvidia,tegra210-host1x", "simple-bus";
|
|
reg = <0x0 0x50000000 0x0 0x00034000>;
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
|
|
clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
|
|
clock-names = "host1x";
|
|
resets = <&tegra_car 28>;
|
|
reset-names = "host1x";
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>;
|
|
|
|
iommus = <&mc TEGRA_SWGROUP_HC>;
|
|
|
|
dpaux1: dpaux@54040000 {
|
|
compatible = "nvidia,tegra210-dpaux";
|
|
reg = <0x0 0x54040000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DPAUX1>,
|
|
<&tegra_car TEGRA210_CLK_PLL_DP>;
|
|
clock-names = "dpaux", "parent";
|
|
resets = <&tegra_car 207>;
|
|
reset-names = "dpaux";
|
|
power-domains = <&pd_sor>;
|
|
status = "disabled";
|
|
|
|
state_dpaux1_aux: pinmux-aux {
|
|
groups = "dpaux-io";
|
|
function = "aux";
|
|
};
|
|
|
|
state_dpaux1_i2c: pinmux-i2c {
|
|
groups = "dpaux-io";
|
|
function = "i2c";
|
|
};
|
|
|
|
state_dpaux1_off: pinmux-off {
|
|
groups = "dpaux-io";
|
|
function = "off";
|
|
};
|
|
|
|
i2c-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
vi@54080000 {
|
|
compatible = "nvidia,tegra210-vi";
|
|
reg = <0x0 0x54080000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tsec@54100000 {
|
|
compatible = "nvidia,tegra210-tsec";
|
|
reg = <0x0 0x54100000 0x0 0x00040000>;
|
|
};
|
|
|
|
dc@54200000 {
|
|
compatible = "nvidia,tegra210-dc";
|
|
reg = <0x0 0x54200000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DISP1>,
|
|
<&tegra_car TEGRA210_CLK_PLL_P>;
|
|
clock-names = "dc", "parent";
|
|
resets = <&tegra_car 27>;
|
|
reset-names = "dc";
|
|
|
|
iommus = <&mc TEGRA_SWGROUP_DC>;
|
|
|
|
nvidia,head = <0>;
|
|
};
|
|
|
|
dc@54240000 {
|
|
compatible = "nvidia,tegra210-dc";
|
|
reg = <0x0 0x54240000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DISP2>,
|
|
<&tegra_car TEGRA210_CLK_PLL_P>;
|
|
clock-names = "dc", "parent";
|
|
resets = <&tegra_car 26>;
|
|
reset-names = "dc";
|
|
|
|
iommus = <&mc TEGRA_SWGROUP_DCB>;
|
|
|
|
nvidia,head = <1>;
|
|
};
|
|
|
|
dsi@54300000 {
|
|
compatible = "nvidia,tegra210-dsi";
|
|
reg = <0x0 0x54300000 0x0 0x00040000>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DSIA>,
|
|
<&tegra_car TEGRA210_CLK_DSIALP>,
|
|
<&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
|
|
clock-names = "dsi", "lp", "parent";
|
|
resets = <&tegra_car 48>;
|
|
reset-names = "dsi";
|
|
power-domains = <&pd_sor>;
|
|
nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
vic@54340000 {
|
|
compatible = "nvidia,tegra210-vic";
|
|
reg = <0x0 0x54340000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_VIC03>;
|
|
clock-names = "vic";
|
|
resets = <&tegra_car 178>;
|
|
reset-names = "vic";
|
|
|
|
iommus = <&mc TEGRA_SWGROUP_VIC>;
|
|
power-domains = <&pd_vic>;
|
|
};
|
|
|
|
nvjpg@54380000 {
|
|
compatible = "nvidia,tegra210-nvjpg";
|
|
reg = <0x0 0x54380000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dsi@54400000 {
|
|
compatible = "nvidia,tegra210-dsi";
|
|
reg = <0x0 0x54400000 0x0 0x00040000>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DSIB>,
|
|
<&tegra_car TEGRA210_CLK_DSIBLP>,
|
|
<&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
|
|
clock-names = "dsi", "lp", "parent";
|
|
resets = <&tegra_car 82>;
|
|
reset-names = "dsi";
|
|
power-domains = <&pd_sor>;
|
|
nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
|
|
|
|
status = "disabled";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
nvdec@54480000 {
|
|
compatible = "nvidia,tegra210-nvdec";
|
|
reg = <0x0 0x54480000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
nvenc@544c0000 {
|
|
compatible = "nvidia,tegra210-nvenc";
|
|
reg = <0x0 0x544c0000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tsec@54500000 {
|
|
compatible = "nvidia,tegra210-tsec";
|
|
reg = <0x0 0x54500000 0x0 0x00040000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sor@54540000 {
|
|
compatible = "nvidia,tegra210-sor";
|
|
reg = <0x0 0x54540000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SOR0>,
|
|
<&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
|
|
<&tegra_car TEGRA210_CLK_PLL_DP>,
|
|
<&tegra_car TEGRA210_CLK_SOR_SAFE>;
|
|
clock-names = "sor", "parent", "dp", "safe";
|
|
resets = <&tegra_car 182>;
|
|
reset-names = "sor";
|
|
pinctrl-0 = <&state_dpaux_aux>;
|
|
pinctrl-1 = <&state_dpaux_i2c>;
|
|
pinctrl-2 = <&state_dpaux_off>;
|
|
pinctrl-names = "aux", "i2c", "off";
|
|
power-domains = <&pd_sor>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sor@54580000 {
|
|
compatible = "nvidia,tegra210-sor1";
|
|
reg = <0x0 0x54580000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SOR1>,
|
|
<&tegra_car TEGRA210_CLK_SOR1_SRC>,
|
|
<&tegra_car TEGRA210_CLK_PLL_D2_OUT0>,
|
|
<&tegra_car TEGRA210_CLK_PLL_DP>,
|
|
<&tegra_car TEGRA210_CLK_SOR_SAFE>;
|
|
clock-names = "sor", "source", "parent", "dp", "safe";
|
|
resets = <&tegra_car 183>;
|
|
reset-names = "sor";
|
|
pinctrl-0 = <&state_dpaux1_aux>;
|
|
pinctrl-1 = <&state_dpaux1_i2c>;
|
|
pinctrl-2 = <&state_dpaux1_off>;
|
|
pinctrl-names = "aux", "i2c", "off";
|
|
power-domains = <&pd_sor>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dpaux: dpaux@545c0000 {
|
|
compatible = "nvidia,tegra124-dpaux";
|
|
reg = <0x0 0x545c0000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
|
|
<&tegra_car TEGRA210_CLK_PLL_DP>;
|
|
clock-names = "dpaux", "parent";
|
|
resets = <&tegra_car 181>;
|
|
reset-names = "dpaux";
|
|
power-domains = <&pd_sor>;
|
|
status = "disabled";
|
|
|
|
state_dpaux_aux: pinmux-aux {
|
|
groups = "dpaux-io";
|
|
function = "aux";
|
|
};
|
|
|
|
state_dpaux_i2c: pinmux-i2c {
|
|
groups = "dpaux-io";
|
|
function = "i2c";
|
|
};
|
|
|
|
state_dpaux_off: pinmux-off {
|
|
groups = "dpaux-io";
|
|
function = "off";
|
|
};
|
|
|
|
i2c-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
isp@54600000 {
|
|
compatible = "nvidia,tegra210-isp";
|
|
reg = <0x0 0x54600000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
isp@54680000 {
|
|
compatible = "nvidia,tegra210-isp";
|
|
reg = <0x0 0x54680000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@546c0000 {
|
|
compatible = "nvidia,tegra210-i2c-vi";
|
|
reg = <0x0 0x546c0000 0x0 0x00040000>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@50041000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0x50041000 0x0 0x1000>,
|
|
<0x0 0x50042000 0x0 0x2000>,
|
|
<0x0 0x50044000 0x0 0x2000>,
|
|
<0x0 0x50046000 0x0 0x2000>;
|
|
interrupts = <GIC_PPI 9
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
gpu@57000000 {
|
|
compatible = "nvidia,gm20b";
|
|
reg = <0x0 0x57000000 0x0 0x01000000>,
|
|
<0x0 0x58000000 0x0 0x01000000>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "stall", "nonstall";
|
|
clocks = <&tegra_car TEGRA210_CLK_GPU>,
|
|
<&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
|
|
<&tegra_car TEGRA210_CLK_PLL_G_REF>;
|
|
clock-names = "gpu", "pwr", "ref";
|
|
resets = <&tegra_car 184>;
|
|
reset-names = "gpu";
|
|
|
|
iommus = <&mc TEGRA_SWGROUP_GPU>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
lic: interrupt-controller@60004000 {
|
|
compatible = "nvidia,tegra210-ictlr";
|
|
reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */
|
|
<0x0 0x60004100 0x0 0x40>, /* secondary controller */
|
|
<0x0 0x60004200 0x0 0x40>, /* tertiary controller */
|
|
<0x0 0x60004300 0x0 0x40>, /* quaternary controller */
|
|
<0x0 0x60004400 0x0 0x40>, /* quinary controller */
|
|
<0x0 0x60004500 0x0 0x40>; /* senary controller */
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
timer@60005000 {
|
|
compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer";
|
|
reg = <0x0 0x60005000 0x0 0x400>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_TIMER>;
|
|
clock-names = "timer";
|
|
};
|
|
|
|
tegra_car: clock@60006000 {
|
|
compatible = "nvidia,tegra210-car";
|
|
reg = <0x0 0x60006000 0x0 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
flow-controller@60007000 {
|
|
compatible = "nvidia,tegra210-flowctrl";
|
|
reg = <0x0 0x60007000 0x0 0x1000>;
|
|
};
|
|
|
|
gpio: gpio@6000d000 {
|
|
compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
|
|
reg = <0x0 0x6000d000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
apbdma: dma@60020000 {
|
|
compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma";
|
|
reg = <0x0 0x60020000 0x0 0x1400>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_APBDMA>;
|
|
clock-names = "dma";
|
|
resets = <&tegra_car 34>;
|
|
reset-names = "dma";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
apbmisc@70000800 {
|
|
compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc";
|
|
reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */
|
|
<0x0 0x7000e864 0x0 0x04>; /* Strapping options */
|
|
};
|
|
|
|
pinmux: pinmux@700008d4 {
|
|
compatible = "nvidia,tegra210-pinmux";
|
|
reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */
|
|
<0x0 0x70003000 0x0 0x294>; /* Mux registers */
|
|
};
|
|
|
|
/*
|
|
* There are two serial driver i.e. 8250 based simple serial
|
|
* driver and APB DMA based serial driver for higher baudrate
|
|
* and performance. To enable the 8250 based driver, the compatible
|
|
* is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
|
|
* the APB DMA based serial driver, the compatible is
|
|
* "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
|
|
*/
|
|
uarta: serial@70006000 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006000 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTA>;
|
|
clock-names = "serial";
|
|
resets = <&tegra_car 6>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 8>, <&apbdma 8>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartb: serial@70006040 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006040 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTB>;
|
|
clock-names = "serial";
|
|
resets = <&tegra_car 7>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 9>, <&apbdma 9>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartc: serial@70006200 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006200 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTC>;
|
|
clock-names = "serial";
|
|
resets = <&tegra_car 55>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 10>, <&apbdma 10>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uartd: serial@70006300 {
|
|
compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
|
|
reg = <0x0 0x70006300 0x0 0x40>;
|
|
reg-shift = <2>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_UARTD>;
|
|
clock-names = "serial";
|
|
resets = <&tegra_car 65>;
|
|
reset-names = "serial";
|
|
dmas = <&apbdma 19>, <&apbdma 19>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@7000a000 {
|
|
compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm";
|
|
reg = <0x0 0x7000a000 0x0 0x100>;
|
|
#pwm-cells = <2>;
|
|
clocks = <&tegra_car TEGRA210_CLK_PWM>;
|
|
clock-names = "pwm";
|
|
resets = <&tegra_car 17>;
|
|
reset-names = "pwm";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c000 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C1>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 12>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 21>, <&apbdma 21>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c400 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c400 0x0 0x100>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C2>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 54>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 22>, <&apbdma 22>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c500 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c500 0x0 0x100>;
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C3>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 67>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 23>, <&apbdma 23>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000c700 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000c700 0x0 0x100>;
|
|
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C4>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 103>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 26>, <&apbdma 26>;
|
|
dma-names = "rx", "tx";
|
|
pinctrl-0 = <&state_dpaux1_i2c>;
|
|
pinctrl-1 = <&state_dpaux1_off>;
|
|
pinctrl-names = "default", "idle";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000d000 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000d000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C5>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 47>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 24>, <&apbdma 24>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@7000d100 {
|
|
compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
|
|
reg = <0x0 0x7000d100 0x0 0x100>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_I2C6>;
|
|
clock-names = "div-clk";
|
|
resets = <&tegra_car 166>;
|
|
reset-names = "i2c";
|
|
dmas = <&apbdma 30>, <&apbdma 30>;
|
|
dma-names = "rx", "tx";
|
|
pinctrl-0 = <&state_dpaux_i2c>;
|
|
pinctrl-1 = <&state_dpaux_off>;
|
|
pinctrl-names = "default", "idle";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d400 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d400 0x0 0x200>;
|
|
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC1>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 41>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 15>, <&apbdma 15>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d600 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d600 0x0 0x200>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC2>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 44>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 16>, <&apbdma 16>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000d800 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000d800 0x0 0x200>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC3>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 46>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 17>, <&apbdma 17>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@7000da00 {
|
|
compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
|
|
reg = <0x0 0x7000da00 0x0 0x200>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SBC4>;
|
|
clock-names = "spi";
|
|
resets = <&tegra_car 68>;
|
|
reset-names = "spi";
|
|
dmas = <&apbdma 18>, <&apbdma 18>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
rtc@7000e000 {
|
|
compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc";
|
|
reg = <0x0 0x7000e000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_RTC>;
|
|
clock-names = "rtc";
|
|
};
|
|
|
|
pmc: pmc@7000e400 {
|
|
compatible = "nvidia,tegra210-pmc";
|
|
reg = <0x0 0x7000e400 0x0 0x400>;
|
|
clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
|
|
clock-names = "pclk", "clk32k_in";
|
|
|
|
powergates {
|
|
pd_audio: aud {
|
|
clocks = <&tegra_car TEGRA210_CLK_APE>,
|
|
<&tegra_car TEGRA210_CLK_APB2APE>;
|
|
resets = <&tegra_car 198>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_sor: sor {
|
|
clocks = <&tegra_car TEGRA210_CLK_SOR0>,
|
|
<&tegra_car TEGRA210_CLK_SOR1>,
|
|
<&tegra_car TEGRA210_CLK_CSI>,
|
|
<&tegra_car TEGRA210_CLK_DSIA>,
|
|
<&tegra_car TEGRA210_CLK_DSIB>,
|
|
<&tegra_car TEGRA210_CLK_DPAUX>,
|
|
<&tegra_car TEGRA210_CLK_DPAUX1>,
|
|
<&tegra_car TEGRA210_CLK_MIPI_CAL>;
|
|
resets = <&tegra_car TEGRA210_CLK_SOR0>,
|
|
<&tegra_car TEGRA210_CLK_SOR1>,
|
|
<&tegra_car TEGRA210_CLK_CSI>,
|
|
<&tegra_car TEGRA210_CLK_DSIA>,
|
|
<&tegra_car TEGRA210_CLK_DSIB>,
|
|
<&tegra_car TEGRA210_CLK_DPAUX>,
|
|
<&tegra_car TEGRA210_CLK_DPAUX1>,
|
|
<&tegra_car TEGRA210_CLK_MIPI_CAL>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_xusbss: xusba {
|
|
clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
|
|
resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_xusbdev: xusbb {
|
|
clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
|
|
resets = <&tegra_car 95>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_xusbhost: xusbc {
|
|
clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
|
|
resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
pd_vic: vic {
|
|
clocks = <&tegra_car TEGRA210_CLK_VIC03>;
|
|
clock-names = "vic";
|
|
resets = <&tegra_car 178>;
|
|
reset-names = "vic";
|
|
#power-domain-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
fuse@7000f800 {
|
|
compatible = "nvidia,tegra210-efuse";
|
|
reg = <0x0 0x7000f800 0x0 0x400>;
|
|
clocks = <&tegra_car TEGRA210_CLK_FUSE>;
|
|
clock-names = "fuse";
|
|
resets = <&tegra_car 39>;
|
|
reset-names = "fuse";
|
|
};
|
|
|
|
mc: memory-controller@70019000 {
|
|
compatible = "nvidia,tegra210-mc";
|
|
reg = <0x0 0x70019000 0x0 0x1000>;
|
|
clocks = <&tegra_car TEGRA210_CLK_MC>;
|
|
clock-names = "mc";
|
|
|
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
#iommu-cells = <1>;
|
|
};
|
|
|
|
hda@70030000 {
|
|
compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda";
|
|
reg = <0x0 0x70030000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_HDA>,
|
|
<&tegra_car TEGRA210_CLK_HDA2HDMI>,
|
|
<&tegra_car TEGRA210_CLK_HDA2CODEC_2X>;
|
|
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
|
|
resets = <&tegra_car 125>, /* hda */
|
|
<&tegra_car 128>, /* hda2hdmi */
|
|
<&tegra_car 111>; /* hda2codec_2x */
|
|
reset-names = "hda", "hda2hdmi", "hda2codec_2x";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@70090000 {
|
|
compatible = "nvidia,tegra210-xusb";
|
|
reg = <0x0 0x70090000 0x0 0x8000>,
|
|
<0x0 0x70098000 0x0 0x1000>,
|
|
<0x0 0x70099000 0x0 0x1000>;
|
|
reg-names = "hcd", "fpci", "ipfs";
|
|
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_SS>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
|
|
<&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
|
|
<&tegra_car TEGRA210_CLK_PLL_U_480M>,
|
|
<&tegra_car TEGRA210_CLK_CLK_M>,
|
|
<&tegra_car TEGRA210_CLK_PLL_E>;
|
|
clock-names = "xusb_host", "xusb_host_src",
|
|
"xusb_falcon_src", "xusb_ss",
|
|
"xusb_ss_div2", "xusb_ss_src",
|
|
"xusb_hs_src", "xusb_fs_src",
|
|
"pll_u_480m", "clk_m", "pll_e";
|
|
resets = <&tegra_car 89>, <&tegra_car 156>,
|
|
<&tegra_car 143>;
|
|
reset-names = "xusb_host", "xusb_ss", "xusb_src";
|
|
|
|
nvidia,xusb-padctl = <&padctl>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
padctl: padctl@7009f000 {
|
|
compatible = "nvidia,tegra210-xusb-padctl";
|
|
reg = <0x0 0x7009f000 0x0 0x1000>;
|
|
resets = <&tegra_car 142>;
|
|
reset-names = "padctl";
|
|
|
|
status = "disabled";
|
|
|
|
pads {
|
|
usb2 {
|
|
clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
|
|
clock-names = "trk";
|
|
status = "disabled";
|
|
|
|
lanes {
|
|
usb2-0 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb2-1 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb2-2 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb2-3 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hsic {
|
|
clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
|
|
clock-names = "trk";
|
|
status = "disabled";
|
|
|
|
lanes {
|
|
hsic-0 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
hsic-1 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
|
|
clock-names = "pll";
|
|
resets = <&tegra_car 205>;
|
|
reset-names = "phy";
|
|
status = "disabled";
|
|
|
|
lanes {
|
|
pcie-0 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-1 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-2 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-3 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-4 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-5 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
pcie-6 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sata {
|
|
clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
|
|
clock-names = "pll";
|
|
resets = <&tegra_car 204>;
|
|
reset-names = "phy";
|
|
status = "disabled";
|
|
|
|
lanes {
|
|
sata-0 {
|
|
status = "disabled";
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ports {
|
|
usb2-0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2-1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2-2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2-3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
hsic-0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3-3 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
sdhci@700b0000 {
|
|
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
|
|
reg = <0x0 0x700b0000 0x0 0x200>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
|
|
clock-names = "sdhci";
|
|
resets = <&tegra_car 14>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0200 {
|
|
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
|
|
reg = <0x0 0x700b0200 0x0 0x200>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
|
|
clock-names = "sdhci";
|
|
resets = <&tegra_car 9>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0400 {
|
|
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
|
|
reg = <0x0 0x700b0400 0x0 0x200>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
|
|
clock-names = "sdhci";
|
|
resets = <&tegra_car 69>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@700b0600 {
|
|
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
|
|
reg = <0x0 0x700b0600 0x0 0x200>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
|
|
clock-names = "sdhci";
|
|
resets = <&tegra_car 15>;
|
|
reset-names = "sdhci";
|
|
status = "disabled";
|
|
};
|
|
|
|
mipi: mipi@700e3000 {
|
|
compatible = "nvidia,tegra210-mipi";
|
|
reg = <0x0 0x700e3000 0x0 0x100>;
|
|
clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
|
|
clock-names = "mipi-cal";
|
|
power-domains = <&pd_sor>;
|
|
#nvidia,mipi-calibrate-cells = <1>;
|
|
};
|
|
|
|
aconnect@702c0000 {
|
|
compatible = "nvidia,tegra210-aconnect";
|
|
clocks = <&tegra_car TEGRA210_CLK_APE>,
|
|
<&tegra_car TEGRA210_CLK_APB2APE>;
|
|
clock-names = "ape", "apb2ape";
|
|
power-domains = <&pd_audio>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
|
|
status = "disabled";
|
|
|
|
adma: dma@702e2000 {
|
|
compatible = "nvidia,tegra210-adma";
|
|
reg = <0x702e2000 0x2000>;
|
|
interrupt-parent = <&agic>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
|
|
clock-names = "d_audio";
|
|
status = "disabled";
|
|
};
|
|
|
|
agic: agic@702f9000 {
|
|
compatible = "nvidia,tegra210-agic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x702f9000 0x2000>,
|
|
<0x702fa000 0x2000>;
|
|
interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
clocks = <&tegra_car TEGRA210_CLK_APE>;
|
|
clock-names = "clk";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi@70410000 {
|
|
compatible = "nvidia,tegra210-qspi";
|
|
reg = <0x0 0x70410000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&tegra_car TEGRA210_CLK_QSPI>;
|
|
clock-names = "qspi";
|
|
resets = <&tegra_car 211>;
|
|
reset-names = "qspi";
|
|
dmas = <&apbdma 5>, <&apbdma 5>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@7d000000 {
|
|
compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci";
|
|
reg = <0x0 0x7d000000 0x0 0x4000>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USBD>;
|
|
clock-names = "usb";
|
|
resets = <&tegra_car 22>;
|
|
reset-names = "usb";
|
|
nvidia,phy = <&phy1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
phy1: usb-phy@7d000000 {
|
|
compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
|
|
reg = <0x0 0x7d000000 0x0 0x4000>,
|
|
<0x0 0x7d000000 0x0 0x4000>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USBD>,
|
|
<&tegra_car TEGRA210_CLK_PLL_U>,
|
|
<&tegra_car TEGRA210_CLK_USBD>;
|
|
clock-names = "reg", "pll_u", "utmi-pads";
|
|
resets = <&tegra_car 22>, <&tegra_car 22>;
|
|
reset-names = "usb", "utmi-pads";
|
|
nvidia,hssync-start-delay = <0>;
|
|
nvidia,idle-wait-delay = <17>;
|
|
nvidia,elastic-limit = <16>;
|
|
nvidia,term-range-adj = <6>;
|
|
nvidia,xcvr-setup = <9>;
|
|
nvidia,xcvr-lsfslew = <0>;
|
|
nvidia,xcvr-lsrslew = <3>;
|
|
nvidia,hssquelch-level = <2>;
|
|
nvidia,hsdiscon-level = <5>;
|
|
nvidia,xcvr-hsslew = <12>;
|
|
nvidia,has-utmi-pad-registers;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@7d004000 {
|
|
compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci";
|
|
reg = <0x0 0x7d004000 0x0 0x4000>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USB2>;
|
|
clock-names = "usb";
|
|
resets = <&tegra_car 58>;
|
|
reset-names = "usb";
|
|
nvidia,phy = <&phy2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
phy2: usb-phy@7d004000 {
|
|
compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
|
|
reg = <0x0 0x7d004000 0x0 0x4000>,
|
|
<0x0 0x7d000000 0x0 0x4000>;
|
|
phy_type = "utmi";
|
|
clocks = <&tegra_car TEGRA210_CLK_USB2>,
|
|
<&tegra_car TEGRA210_CLK_PLL_U>,
|
|
<&tegra_car TEGRA210_CLK_USBD>;
|
|
clock-names = "reg", "pll_u", "utmi-pads";
|
|
resets = <&tegra_car 58>, <&tegra_car 22>;
|
|
reset-names = "usb", "utmi-pads";
|
|
nvidia,hssync-start-delay = <0>;
|
|
nvidia,idle-wait-delay = <17>;
|
|
nvidia,elastic-limit = <16>;
|
|
nvidia,term-range-adj = <6>;
|
|
nvidia,xcvr-setup = <9>;
|
|
nvidia,xcvr-lsfslew = <0>;
|
|
nvidia,xcvr-lsrslew = <3>;
|
|
nvidia,hssquelch-level = <2>;
|
|
nvidia,hsdiscon-level = <5>;
|
|
nvidia,xcvr-hsslew = <12>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <1>;
|
|
};
|
|
|
|
cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <2>;
|
|
};
|
|
|
|
cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <3>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
soctherm: thermal-sensor@700e2000 {
|
|
compatible = "nvidia,tegra210-soctherm";
|
|
reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
|
|
0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
|
|
reg-names = "soctherm-reg", "car-reg";
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
|
|
<&tegra_car TEGRA210_CLK_SOC_THERM>;
|
|
clock-names = "tsensor", "soctherm";
|
|
resets = <&tegra_car 78>;
|
|
reset-names = "soctherm";
|
|
#thermal-sensor-cells = <1>;
|
|
|
|
throttle-cfgs {
|
|
throttle_heavy: heavy {
|
|
nvidia,priority = <100>;
|
|
nvidia,cpu-throt-percent = <85>;
|
|
|
|
#cooling-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors =
|
|
<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
|
|
|
|
trips {
|
|
cpu-shutdown-trip {
|
|
temperature = <102500>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
|
|
cpu_throttle_trip: throttle-trip {
|
|
temperature = <98500>;
|
|
hysteresis = <1000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_throttle_trip>;
|
|
cooling-device = <&throttle_heavy 1 1>;
|
|
};
|
|
};
|
|
};
|
|
mem {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors =
|
|
<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
|
|
|
|
trips {
|
|
mem-shutdown-trip {
|
|
temperature = <103000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
/*
|
|
* There are currently no cooling maps,
|
|
* because there are no cooling devices.
|
|
*/
|
|
};
|
|
};
|
|
gpu {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors =
|
|
<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
|
|
|
|
trips {
|
|
gpu-shutdown-trip {
|
|
temperature = <103000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
|
|
gpu_throttle_trip: throttle-trip {
|
|
temperature = <100000>;
|
|
hysteresis = <1000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&gpu_throttle_trip>;
|
|
cooling-device = <&throttle_heavy 1 1>;
|
|
};
|
|
};
|
|
};
|
|
pllx {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors =
|
|
<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
|
|
|
|
trips {
|
|
pllx-shutdown-trip {
|
|
temperature = <103000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
/*
|
|
* There are currently no cooling maps,
|
|
* because there are no cooling devices.
|
|
*/
|
|
};
|
|
};
|
|
};
|
|
};
|