linux_dsm_epyc7002/arch/blackfin/mach-common/entry.S
Sonic Zhang c7e48e1e3e bfin: pm: add deepsleep for bf60x
Add add deepsleep for bf60x.
1. Call DMC init functions to enter and exit DDR self refresh mode.
2. Wait till CGU PLL is locked after wake up and exit DDR self refresh mode.
3. Make asessembly function enter_deepsleep comply with C funtion ABI in
order to call other C functions.
4. Switch kernel stack by register EX_SCRATCH_REG.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24 13:39:49 +08:00

1757 lines
43 KiB
ArmAsm

/*
* Contains the system-call and fault low-level handling routines.
* This also contains the timer-interrupt handler, as well as all
* interrupts and faults that can result in a task-switch.
*
* Copyright 2005-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
/* NOTE: This code handles signal-recognition, which happens every time
* after a timer-interrupt and after each system call.
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/unistd.h>
#include <asm/blackfin.h>
#include <asm/errno.h>
#include <asm/fixed_code.h>
#include <asm/thread_info.h> /* TIF_NEED_RESCHED */
#include <asm/asm-offsets.h>
#include <asm/trace.h>
#include <asm/traps.h>
#include <asm/context.S>
#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
.section .l1.text
#else
.text
#endif
/* Slightly simplified and streamlined entry point for CPLB misses.
* This one does not lower the level to IRQ5, and thus can be used to
* patch up CPLB misses on the kernel stack.
*/
#if ANOMALY_05000261
#define _ex_dviol _ex_workaround_261
#define _ex_dmiss _ex_workaround_261
#define _ex_dmult _ex_workaround_261
ENTRY(_ex_workaround_261)
/*
* Work around an anomaly: if we see a new DCPLB fault, return
* without doing anything. Then, if we get the same fault again,
* handle it.
*/
P4 = R7; /* Store EXCAUSE */
GET_PDA(p5, r7);
r7 = [p5 + PDA_LFRETX];
r6 = retx;
[p5 + PDA_LFRETX] = r6;
cc = r6 == r7;
if !cc jump _bfin_return_from_exception;
/* fall through */
R7 = P4;
R6 = VEC_CPLB_M; /* Data CPLB Miss */
cc = R6 == R7;
if cc jump _ex_dcplb_miss (BP);
#ifdef CONFIG_MPU
R6 = VEC_CPLB_VL; /* Data CPLB Violation */
cc = R6 == R7;
if cc jump _ex_dcplb_viol (BP);
#endif
/* Handle Data CPLB Protection Violation
* and Data CPLB Multiple Hits - Linux Trap Zero
*/
jump _ex_trap_c;
ENDPROC(_ex_workaround_261)
#else
#ifdef CONFIG_MPU
#define _ex_dviol _ex_dcplb_viol
#else
#define _ex_dviol _ex_trap_c
#endif
#define _ex_dmiss _ex_dcplb_miss
#define _ex_dmult _ex_trap_c
#endif
ENTRY(_ex_dcplb_viol)
ENTRY(_ex_dcplb_miss)
ENTRY(_ex_icplb_miss)
(R7:6,P5:4) = [sp++];
/* We leave the previously pushed ASTAT on the stack. */
SAVE_CONTEXT_CPLB
/* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that
* will change the stack pointer. */
R0 = SEQSTAT;
R1 = SP;
DEBUG_HWTRACE_SAVE(p5, r7)
sp += -12;
call _cplb_hdr;
sp += 12;
CC = R0 == 0;
IF !CC JUMP _handle_bad_cplb;
#ifdef CONFIG_DEBUG_DOUBLEFAULT
/* While we were processing this, did we double fault? */
r7 = SEQSTAT; /* reason code is in bit 5:0 */
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
r7 = r7 & r6;
r6 = 0x25;
CC = R7 == R6;
if CC JUMP _double_fault;
#endif
DEBUG_HWTRACE_RESTORE(p5, r7)
RESTORE_CONTEXT_CPLB
ASTAT = [SP++];
SP = EX_SCRATCH_REG;
rtx;
ENDPROC(_ex_icplb_miss)
ENTRY(_ex_syscall)
raise 15; /* invoked by TRAP #0, for sys call */
jump.s _bfin_return_from_exception;
ENDPROC(_ex_syscall)
ENTRY(_ex_single_step)
/* If we just returned from an interrupt, the single step event is
for the RTI instruction. */
r7 = retx;
r6 = reti;
cc = r7 == r6;
if cc jump _bfin_return_from_exception;
#ifdef CONFIG_KGDB
/* Don't do single step in hardware exception handler */
p5.l = lo(IPEND);
p5.h = hi(IPEND);
r6 = [p5];
cc = bittst(r6, 4);
if cc jump _bfin_return_from_exception;
cc = bittst(r6, 5);
if cc jump _bfin_return_from_exception;
/* skip single step if current interrupt priority is higher than
* that of the first instruction, from which gdb starts single step */
r6 >>= 6;
r7 = 10;
.Lfind_priority_start:
cc = bittst(r6, 0);
if cc jump .Lfind_priority_done;
r6 >>= 1;
r7 += -1;
cc = r7 == 0;
if cc jump .Lfind_priority_done;
jump.s .Lfind_priority_start;
.Lfind_priority_done:
p4.l = _kgdb_single_step;
p4.h = _kgdb_single_step;
r6 = [p4];
cc = r6 == 0;
if cc jump .Ldo_single_step;
r6 += -1;
cc = r6 < r7;
if cc jump 1f;
.Ldo_single_step:
#else
/* If we were in user mode, do the single step normally. */
p5.l = lo(IPEND);
p5.h = hi(IPEND);
r6 = [p5];
r7 = 0xffe0 (z);
r7 = r7 & r6;
cc = r7 == 0;
if !cc jump 1f;
#endif
#ifdef CONFIG_EXACT_HWERR
/* Read the ILAT, and to check to see if the process we are
* single stepping caused a previous hardware error
* If so, do not single step, (which lowers to IRQ5, and makes
* us miss the error).
*/
p5.l = lo(ILAT);
p5.h = hi(ILAT);
r7 = [p5];
cc = bittst(r7, EVT_IVHW_P);
if cc jump 1f;
#endif
/* Single stepping only a single instruction, so clear the trace
* bit here. */
r7 = syscfg;
bitclr (r7, SYSCFG_SSSTEP_P);
syscfg = R7;
jump _ex_trap_c;
1:
/*
* We were in an interrupt handler. By convention, all of them save
* SYSCFG with their first instruction, so by checking whether our
* RETX points at the entry point, we can determine whether to allow
* a single step, or whether to clear SYSCFG.
*
* First, find out the interrupt level and the event vector for it.
*/
p5.l = lo(EVT0);
p5.h = hi(EVT0);
p5 += -4;
2:
r7 = rot r7 by -1;
p5 += 4;
if !cc jump 2b;
/* What we actually do is test for the _second_ instruction in the
* IRQ handler. That way, if there are insns following the restore
* of SYSCFG after leaving the handler, we will not turn off SYSCFG
* for them. */
r7 = [p5];
r7 += 2;
r6 = RETX;
cc = R7 == R6;
if !cc jump _bfin_return_from_exception;
r7 = syscfg;
bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */
syscfg = R7;
/* Fall through to _bfin_return_from_exception. */
ENDPROC(_ex_single_step)
ENTRY(_bfin_return_from_exception)
#if ANOMALY_05000257
R7=LC0;
LC0=R7;
R7=LC1;
LC1=R7;
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT
/* While we were processing the current exception,
* did we cause another, and double fault?
*/
r7 = SEQSTAT; /* reason code is in bit 5:0 */
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
r7 = r7 & r6;
r6 = VEC_UNCOV;
CC = R7 == R6;
if CC JUMP _double_fault;
#endif
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
sp = EX_SCRATCH_REG;
rtx;
ENDPROC(_bfin_return_from_exception)
ENTRY(_handle_bad_cplb)
DEBUG_HWTRACE_RESTORE(p5, r7)
/* To get here, we just tried and failed to change a CPLB
* so, handle things in trap_c (C code), by lowering to
* IRQ5, just like we normally do. Since this is not a
* "normal" return path, we have a do a lot of stuff to
* the stack to get ready so, we can fall through - we
* need to make a CPLB exception look like a normal exception
*/
RESTORE_CONTEXT_CPLB
/* ASTAT is still on the stack, where it is needed. */
[--sp] = (R7:6,P5:4);
ENTRY(_ex_replaceable)
nop;
ENTRY(_ex_trap_c)
/* The only thing that has been saved in this context is
* (R7:6,P5:4), ASTAT & SP - don't use anything else
*/
GET_PDA(p5, r6);
/* Make sure we are not in a double fault */
p4.l = lo(IPEND);
p4.h = hi(IPEND);
r7 = [p4];
CC = BITTST (r7, 5);
if CC jump _double_fault;
[p5 + PDA_EXIPEND] = r7;
/* Call C code (trap_c) to handle the exception, which most
* likely involves sending a signal to the current process.
* To avoid double faults, lower our priority to IRQ5 first.
*/
r7.h = _exception_to_level5;
r7.l = _exception_to_level5;
p4.l = lo(EVT5);
p4.h = hi(EVT5);
[p4] = r7;
csync;
/*
* Save these registers, as they are only valid in exception context
* (where we are now - as soon as we defer to IRQ5, they can change)
* DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
* but they are not very interesting, so don't save them
*/
p4.l = lo(DCPLB_FAULT_ADDR);
p4.h = hi(DCPLB_FAULT_ADDR);
r7 = [p4];
[p5 + PDA_DCPLB] = r7;
p4.l = lo(ICPLB_FAULT_ADDR);
p4.h = hi(ICPLB_FAULT_ADDR);
r6 = [p4];
[p5 + PDA_ICPLB] = r6;
r6 = retx;
[p5 + PDA_RETX] = r6;
r6 = SEQSTAT;
[p5 + PDA_SEQSTAT] = r6;
/* Save the state of single stepping */
r6 = SYSCFG;
[p5 + PDA_SYSCFG] = r6;
/* Clear it while we handle the exception in IRQ5 mode */
BITCLR(r6, SYSCFG_SSSTEP_P);
SYSCFG = r6;
/* Save the current IMASK, since we change in order to jump to level 5 */
cli r6;
[p5 + PDA_EXIMASK] = r6;
p4.l = lo(SAFE_USER_INSTRUCTION);
p4.h = hi(SAFE_USER_INSTRUCTION);
retx = p4;
/* Disable all interrupts, but make sure level 5 is enabled so
* we can switch to that level.
*/
r6 = 0x3f;
sti r6;
/* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
* clear it (re-enabling interrupts again) by the special sequence of pushing
* RETI onto the stack. This way we can lower ourselves to IVG5 even if the
* exception was taken after the interrupt handler was called but before it
* got a chance to enable global interrupts itself.
*/
[--sp] = reti;
sp += 4;
raise 5;
jump.s _bfin_return_from_exception;
ENDPROC(_ex_trap_c)
/* We just realized we got an exception, while we were processing a different
* exception. This is a unrecoverable event, so crash.
* Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
*/
ENTRY(_double_fault)
/* Turn caches & protection off, to ensure we don't get any more
* double exceptions
*/
P4.L = LO(IMEM_CONTROL);
P4.H = HI(IMEM_CONTROL);
R5 = [P4]; /* Control Register*/
BITCLR(R5,ENICPLB_P);
CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
[P4] = R5;
SSYNC;
P4.L = LO(DMEM_CONTROL);
P4.H = HI(DMEM_CONTROL);
R5 = [P4];
BITCLR(R5,ENDCPLB_P);
CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
[P4] = R5;
SSYNC;
/* Fix up the stack */
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
SP = EX_SCRATCH_REG;
/* We should be out of the exception stack, and back down into
* kernel or user space stack
*/
SAVE_ALL_SYS
/* The dumping functions expect the return address in the RETI
* slot. */
r6 = retx;
[sp + PT_PC] = r6;
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
SP += -12;
pseudo_long_call _double_fault_c, p5;
SP += 12;
.L_double_fault_panic:
JUMP .L_double_fault_panic
ENDPROC(_double_fault)
ENTRY(_exception_to_level5)
SAVE_ALL_SYS
GET_PDA(p5, r7); /* Fetch current PDA */
r6 = [p5 + PDA_RETX];
[sp + PT_PC] = r6;
r6 = [p5 + PDA_SYSCFG];
[sp + PT_SYSCFG] = r6;
r6 = [p5 + PDA_SEQSTAT]; /* Read back seqstat */
[sp + PT_SEQSTAT] = r6;
/* Restore the hardware error vector. */
r7.h = _evt_ivhw;
r7.l = _evt_ivhw;
p4.l = lo(EVT5);
p4.h = hi(EVT5);
[p4] = r7;
csync;
#ifdef CONFIG_DEBUG_DOUBLEFAULT
/* Now that we have the hardware error vector programmed properly
* we can re-enable interrupts (IPEND[4]), so if the _trap_c causes
* another hardware error, we can catch it (self-nesting).
*/
[--sp] = reti;
sp += 4;
#endif
r7 = [p5 + PDA_EXIPEND] /* Read the IPEND from the Exception state */
[sp + PT_IPEND] = r7; /* Store IPEND onto the stack */
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
SP += -12;
pseudo_long_call _trap_c, p4;
SP += 12;
/* If interrupts were off during the exception (IPEND[4] = 1), turn them off
* before we return.
*/
CC = BITTST(r7, EVT_IRPTEN_P)
if !CC jump 1f;
/* this will load a random value into the reti register - but that is OK,
* since we do restore it to the correct value in the 'RESTORE_ALL_SYS' macro
*/
sp += -4;
reti = [sp++];
1:
/* restore the interrupt mask (IMASK) */
r6 = [p5 + PDA_EXIMASK];
sti r6;
call _ret_from_exception;
RESTORE_ALL_SYS
rti;
ENDPROC(_exception_to_level5)
ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
/* Since the kernel stack can be anywhere, it's not guaranteed to be
* covered by a CPLB. Switch to an exception stack; use RETN as a
* scratch register (for want of a better option).
*/
EX_SCRATCH_REG = sp;
GET_PDA_SAFE(sp);
sp = [sp + PDA_EXSTACK];
/* Try to deal with syscalls quickly. */
[--sp] = ASTAT;
[--sp] = (R7:6,P5:4);
ANOMALY_283_315_WORKAROUND(p5, r7)
#ifdef CONFIG_EXACT_HWERR
/* Make sure all pending read/writes complete. This will ensure any
* accesses which could cause hardware errors completes, and signal
* the the hardware before we do something silly, like crash the
* kernel. We don't need to work around anomaly 05000312, since
* we are already atomic
*/
ssync;
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT
/*
* Save these registers, as they are only valid in exception context
* (where we are now - as soon as we defer to IRQ5, they can change)
* DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
* but they are not very interesting, so don't save them
*/
GET_PDA(p5, r7);
p4.l = lo(DCPLB_FAULT_ADDR);
p4.h = hi(DCPLB_FAULT_ADDR);
r7 = [p4];
[p5 + PDA_DF_DCPLB] = r7;
p4.l = lo(ICPLB_FAULT_ADDR);
p4.h = hi(ICPLB_FAULT_ADDR);
r7 = [p4];
[p5 + PDA_DF_ICPLB] = r7;
r7 = retx;
[p5 + PDA_DF_RETX] = r7;
r7 = SEQSTAT; /* reason code is in bit 5:0 */
[p5 + PDA_DF_SEQSTAT] = r7;
#else
r7 = SEQSTAT; /* reason code is in bit 5:0 */
#endif
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
r7 = r7 & r6;
p5.h = _ex_table;
p5.l = _ex_table;
p4 = r7;
p5 = p5 + (p4 << 2);
p4 = [p5];
jump (p4);
.Lbadsys:
r7 = -ENOSYS; /* signextending enough */
[sp + PT_R0] = r7; /* return value from system call */
jump .Lsyscall_really_exit;
ENDPROC(_trap)
ENTRY(_kernel_execve)
link SIZEOF_PTREGS;
p0 = sp;
r3 = SIZEOF_PTREGS / 4;
r4 = 0(x);
.Lclear_regs:
[p0++] = r4;
r3 += -1;
cc = r3 == 0;
if !cc jump .Lclear_regs (bp);
p0 = sp;
sp += -16;
[sp + 12] = p0;
pseudo_long_call _do_execve, p5;
SP += 16;
cc = r0 == 0;
if ! cc jump .Lexecve_failed;
/* Success. Copy our temporary pt_regs to the top of the kernel
* stack and do a normal exception return.
*/
r1 = sp;
r0 = (-KERNEL_STACK_SIZE) (x);
r1 = r1 & r0;
p2 = r1;
p3 = [p2];
r0 = KERNEL_STACK_SIZE - 4 (z);
p1 = r0;
p1 = p1 + p2;
p0 = fp;
r4 = [p0--];
r3 = SIZEOF_PTREGS / 4;
.Lcopy_regs:
r4 = [p0--];
[p1--] = r4;
r3 += -1;
cc = r3 == 0;
if ! cc jump .Lcopy_regs (bp);
r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z);
p1 = r0;
p1 = p1 + p2;
sp = p1;
r0 = syscfg;
[SP + PT_SYSCFG] = r0;
[p3 + (TASK_THREAD + THREAD_KSP)] = sp;
RESTORE_CONTEXT;
rti;
.Lexecve_failed:
unlink;
rts;
ENDPROC(_kernel_execve)
ENTRY(_system_call)
/* Store IPEND */
p2.l = lo(IPEND);
p2.h = hi(IPEND);
csync;
r0 = [p2];
[sp + PT_IPEND] = r0;
/* Store RETS for now */
r0 = rets;
[sp + PT_RESERVED] = r0;
/* Set the stack for the current process */
r7 = sp;
r6.l = lo(ALIGN_PAGE_MASK);
r6.h = hi(ALIGN_PAGE_MASK);
r7 = r7 & r6; /* thread_info */
p2 = r7;
p2 = [p2];
[p2+(TASK_THREAD+THREAD_KSP)] = sp;
#ifdef CONFIG_IPIPE
r0 = sp;
SP += -12;
pseudo_long_call ___ipipe_syscall_root, p0;
SP += 12;
cc = r0 == 1;
if cc jump .Lsyscall_really_exit;
cc = r0 == -1;
if cc jump .Lresume_userspace;
r3 = [sp + PT_R3];
r4 = [sp + PT_R4];
p0 = [sp + PT_ORIG_P0];
#endif /* CONFIG_IPIPE */
/* are we tracing syscalls?*/
r7 = sp;
r6.l = lo(ALIGN_PAGE_MASK);
r6.h = hi(ALIGN_PAGE_MASK);
r7 = r7 & r6;
p2 = r7;
r7 = [p2+TI_FLAGS];
CC = BITTST(r7,TIF_SYSCALL_TRACE);
if CC JUMP _sys_trace;
CC = BITTST(r7,TIF_SINGLESTEP);
if CC JUMP _sys_trace;
/* Make sure the system call # is valid */
p4 = __NR_syscall;
/* System call number is passed in P0 */
cc = p4 <= p0;
if cc jump .Lbadsys;
/* Execute the appropriate system call */
p4 = p0;
p5.l = _sys_call_table;
p5.h = _sys_call_table;
p5 = p5 + (p4 << 2);
r0 = [sp + PT_R0];
r1 = [sp + PT_R1];
r2 = [sp + PT_R2];
p5 = [p5];
[--sp] = r5;
[--sp] = r4;
[--sp] = r3;
SP += -12;
call (p5);
SP += 24;
[sp + PT_R0] = r0;
.Lresume_userspace:
r7 = sp;
r4.l = lo(ALIGN_PAGE_MASK);
r4.h = hi(ALIGN_PAGE_MASK);
r7 = r7 & r4; /* thread_info->flags */
p5 = r7;
.Lresume_userspace_1:
/* Disable interrupts. */
[--sp] = reti;
reti = [sp++];
r7 = [p5 + TI_FLAGS];
r4.l = lo(_TIF_WORK_MASK);
r4.h = hi(_TIF_WORK_MASK);
r7 = r7 & r4;
.Lsyscall_resched:
#ifdef CONFIG_IPIPE
cc = BITTST(r7, TIF_IRQ_SYNC);
if !cc jump .Lsyscall_no_irqsync;
/*
* Clear IPEND[4] manually to undo what resume_userspace_1 just did;
* we need this so that high priority domain interrupts may still
* preempt the current domain while the pipeline log is being played
* back.
*/
[--sp] = reti;
SP += 4; /* don't merge with next insn to keep the pattern obvious */
SP += -12;
pseudo_long_call ___ipipe_sync_root, p4;
SP += 12;
jump .Lresume_userspace_1;
.Lsyscall_no_irqsync:
#endif
cc = BITTST(r7, TIF_NEED_RESCHED);
if !cc jump .Lsyscall_sigpending;
/* Reenable interrupts. */
[--sp] = reti;
sp += 4;
SP += -12;
pseudo_long_call _schedule, p4;
SP += 12;
jump .Lresume_userspace_1;
.Lsyscall_sigpending:
cc = BITTST(r7, TIF_SIGPENDING);
if cc jump .Lsyscall_do_signals;
cc = BITTST(r7, TIF_NOTIFY_RESUME);
if !cc jump .Lsyscall_really_exit;
.Lsyscall_do_signals:
/* Reenable interrupts. */
[--sp] = reti;
sp += 4;
r0 = sp;
SP += -12;
pseudo_long_call _do_notify_resume, p5;
SP += 12;
.Lsyscall_really_exit:
r5 = [sp + PT_RESERVED];
rets = r5;
rts;
ENDPROC(_system_call)
/* Do not mark as ENTRY() to avoid error in assembler ...
* this symbol need not be global anyways, so ...
*/
_sys_trace:
r0 = sp;
pseudo_long_call _syscall_trace_enter, p5;
/* Make sure the system call # is valid */
p4 = [SP + PT_P0];
p3 = __NR_syscall;
cc = p3 <= p4;
r0 = -ENOSYS;
if cc jump .Lsys_trace_badsys;
/* Execute the appropriate system call */
p5.l = _sys_call_table;
p5.h = _sys_call_table;
p5 = p5 + (p4 << 2);
r0 = [sp + PT_R0];
r1 = [sp + PT_R1];
r2 = [sp + PT_R2];
r3 = [sp + PT_R3];
r4 = [sp + PT_R4];
r5 = [sp + PT_R5];
p5 = [p5];
[--sp] = r5;
[--sp] = r4;
[--sp] = r3;
SP += -12;
call (p5);
SP += 24;
.Lsys_trace_badsys:
[sp + PT_R0] = r0;
r0 = sp;
pseudo_long_call _syscall_trace_leave, p5;
jump .Lresume_userspace;
ENDPROC(_sys_trace)
ENTRY(_resume)
/*
* Beware - when entering resume, prev (the current task) is
* in r0, next (the new task) is in r1.
*/
p0 = r0;
p1 = r1;
[--sp] = rets;
[--sp] = fp;
[--sp] = (r7:4, p5:3);
/* save usp */
p2 = usp;
[p0+(TASK_THREAD+THREAD_USP)] = p2;
/* save current kernel stack pointer */
[p0+(TASK_THREAD+THREAD_KSP)] = sp;
/* save program counter */
r1.l = _new_old_task;
r1.h = _new_old_task;
[p0+(TASK_THREAD+THREAD_PC)] = r1;
/* restore the kernel stack pointer */
sp = [p1+(TASK_THREAD+THREAD_KSP)];
/* restore user stack pointer */
p0 = [p1+(TASK_THREAD+THREAD_USP)];
usp = p0;
/* restore pc */
p0 = [p1+(TASK_THREAD+THREAD_PC)];
jump (p0);
/*
* Following code actually lands up in a new (old) task.
*/
_new_old_task:
(r7:4, p5:3) = [sp++];
fp = [sp++];
rets = [sp++];
/*
* When we come out of resume, r0 carries "old" task, because we are
* in "new" task.
*/
rts;
ENDPROC(_resume)
ENTRY(_ret_from_exception)
#ifdef CONFIG_IPIPE
p2.l = _ipipe_percpu_domain;
p2.h = _ipipe_percpu_domain;
r0.l = _ipipe_root;
r0.h = _ipipe_root;
r2 = [p2];
cc = r0 == r2;
if !cc jump 4f; /* not on behalf of the root domain, get out */
#endif /* CONFIG_IPIPE */
p2.l = lo(IPEND);
p2.h = hi(IPEND);
csync;
r0 = [p2];
[sp + PT_IPEND] = r0;
1:
r2 = LO(~0x37) (Z);
r0 = r2 & r0;
cc = r0 == 0;
if !cc jump 4f; /* if not return to user mode, get out */
/* Make sure any pending system call or deferred exception
* return in ILAT for this process to get executed, otherwise
* in case context switch happens, system call of
* first process (i.e in ILAT) will be carried
* forward to the switched process
*/
p2.l = lo(ILAT);
p2.h = hi(ILAT);
r0 = [p2];
r1 = (EVT_IVG14 | EVT_IVG15) (z);
r0 = r0 & r1;
cc = r0 == 0;
if !cc jump 5f;
/* Set the stack for the current process */
r7 = sp;
r4.l = lo(ALIGN_PAGE_MASK);
r4.h = hi(ALIGN_PAGE_MASK);
r7 = r7 & r4; /* thread_info->flags */
p5 = r7;
r7 = [p5 + TI_FLAGS];
r4.l = lo(_TIF_WORK_MASK);
r4.h = hi(_TIF_WORK_MASK);
r7 = r7 & r4;
cc = r7 == 0;
if cc jump 4f;
p0.l = lo(EVT15);
p0.h = hi(EVT15);
p1.l = _schedule_and_signal;
p1.h = _schedule_and_signal;
[p0] = p1;
csync;
raise 15; /* raise evt15 to do signal or reschedule */
4:
r0 = syscfg;
bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */
syscfg = r0;
5:
rts;
ENDPROC(_ret_from_exception)
#if defined(CONFIG_PREEMPT)
ENTRY(_up_to_irq14)
#if ANOMALY_05000281 || ANOMALY_05000461
r0.l = lo(SAFE_USER_INSTRUCTION);
r0.h = hi(SAFE_USER_INSTRUCTION);
reti = r0;
#endif
#ifdef CONFIG_DEBUG_HWERR
/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
#else
/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
#endif
sti r0;
p0.l = lo(EVT14);
p0.h = hi(EVT14);
p1.l = _evt_up_evt14;
p1.h = _evt_up_evt14;
[p0] = p1;
csync;
raise 14;
1:
jump 1b;
ENDPROC(_up_to_irq14)
ENTRY(_evt_up_evt14)
#ifdef CONFIG_DEBUG_HWERR
r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
sti r0;
#else
cli r0;
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
[--sp] = rets;
sp += -12;
call _trace_hardirqs_off;
sp += 12;
rets = [sp++];
#endif
[--sp] = RETI;
SP += 4;
/* restore normal evt14 */
p0.l = lo(EVT14);
p0.h = hi(EVT14);
p1.l = _evt_evt14;
p1.h = _evt_evt14;
[p0] = p1;
csync;
rts;
ENDPROC(_evt_up_evt14)
#endif
#ifdef CONFIG_IPIPE
_resume_kernel_from_int:
r1 = LO(~0x8000) (Z);
r1 = r0 & r1;
r0 = 1;
r0 = r1 - r0;
r2 = r1 & r0;
cc = r2 == 0;
/* Sync the root stage only from the outer interrupt level. */
if !cc jump .Lnosync;
r0.l = ___ipipe_sync_root;
r0.h = ___ipipe_sync_root;
[--sp] = reti;
[--sp] = rets;
[--sp] = ( r7:4, p5:3 );
SP += -12;
call ___ipipe_call_irqtail
SP += 12;
( r7:4, p5:3 ) = [sp++];
rets = [sp++];
reti = [sp++];
.Lnosync:
rts
#elif defined(CONFIG_PREEMPT)
_resume_kernel_from_int:
/* check preempt_count */
r7 = sp;
r4.l = lo(ALIGN_PAGE_MASK);
r4.h = hi(ALIGN_PAGE_MASK);
r7 = r7 & r4;
p5 = r7;
r7 = [p5 + TI_PREEMPT];
cc = r7 == 0x0;
if !cc jump .Lreturn_to_kernel;
.Lneed_schedule:
r7 = [p5 + TI_FLAGS];
r4.l = lo(_TIF_WORK_MASK);
r4.h = hi(_TIF_WORK_MASK);
r7 = r7 & r4;
cc = BITTST(r7, TIF_NEED_RESCHED);
if !cc jump .Lreturn_to_kernel;
/*
* let schedule done at level 15, otherwise sheduled process will run
* at high level and block low level interrupt
*/
r6 = reti; /* save reti */
r5.l = .Lkernel_schedule;
r5.h = .Lkernel_schedule;
reti = r5;
rti;
.Lkernel_schedule:
[--sp] = rets;
sp += -12;
pseudo_long_call _preempt_schedule_irq, p4;
sp += 12;
rets = [sp++];
[--sp] = rets;
sp += -12;
/* up to irq14 so that reti after restore_all can return to irq15(kernel) */
pseudo_long_call _up_to_irq14, p4;
sp += 12;
rets = [sp++];
reti = r6; /* restore reti so that origin process can return to interrupted point */
jump .Lneed_schedule;
#else
#define _resume_kernel_from_int .Lreturn_to_kernel
#endif
ENTRY(_return_from_int)
/* If someone else already raised IRQ 15, do nothing. */
csync;
p2.l = lo(ILAT);
p2.h = hi(ILAT);
r0 = [p2];
cc = bittst (r0, EVT_IVG15_P);
if cc jump .Lreturn_to_kernel;
/* if not return to user mode, get out */
p2.l = lo(IPEND);
p2.h = hi(IPEND);
r0 = [p2];
r1 = 0x17(Z);
r2 = ~r1;
r2.h = 0;
r0 = r2 & r0;
r1 = 1;
r1 = r0 - r1;
r2 = r0 & r1;
cc = r2 == 0;
if !cc jump _resume_kernel_from_int;
/* Lower the interrupt level to 15. */
p0.l = lo(EVT15);
p0.h = hi(EVT15);
p1.l = _schedule_and_signal_from_int;
p1.h = _schedule_and_signal_from_int;
[p0] = p1;
csync;
#if ANOMALY_05000281 || ANOMALY_05000461
r0.l = lo(SAFE_USER_INSTRUCTION);
r0.h = hi(SAFE_USER_INSTRUCTION);
reti = r0;
#endif
r0 = 0x801f (z);
STI r0;
raise 15; /* raise evt15 to do signal or reschedule */
rti;
.Lreturn_to_kernel:
rts;
ENDPROC(_return_from_int)
ENTRY(_lower_to_irq14)
#if ANOMALY_05000281 || ANOMALY_05000461
r0.l = lo(SAFE_USER_INSTRUCTION);
r0.h = hi(SAFE_USER_INSTRUCTION);
reti = r0;
#endif
#ifdef CONFIG_DEBUG_HWERR
/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
#else
/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
#endif
sti r0;
raise 14;
rti;
ENDPROC(_lower_to_irq14)
ENTRY(_evt_evt14)
#ifdef CONFIG_DEBUG_HWERR
r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
sti r0;
#else
cli r0;
#endif
#ifdef CONFIG_TRACE_IRQFLAGS
[--sp] = rets;
sp += -12;
call _trace_hardirqs_off;
sp += 12;
rets = [sp++];
#endif
[--sp] = RETI;
SP += 4;
rts;
ENDPROC(_evt_evt14)
ENTRY(_schedule_and_signal_from_int)
/* To end up here, vector 15 was changed - so we have to change it
* back.
*/
p0.l = lo(EVT15);
p0.h = hi(EVT15);
p1.l = _evt_system_call;
p1.h = _evt_system_call;
[p0] = p1;
csync;
/* Set orig_p0 to -1 to indicate this isn't the end of a syscall. */
r0 = -1 (x);
[sp + PT_ORIG_P0] = r0;
p1 = rets;
[sp + PT_RESERVED] = p1;
#ifdef CONFIG_TRACE_IRQFLAGS
/* trace_hardirqs_on() checks if all irqs are disabled. But here IRQ 15
* is turned on, so disable all irqs. */
cli r0;
sp += -12;
call _trace_hardirqs_on;
sp += 12;
#endif
#ifdef CONFIG_SMP
GET_PDA(p0, r0); /* Fetch current PDA (can't migrate to other CPU here) */
r0 = [p0 + PDA_IRQFLAGS];
#else
p0.l = _bfin_irq_flags;
p0.h = _bfin_irq_flags;
r0 = [p0];
#endif
sti r0;
/* finish the userspace "atomic" functions for it */
r1.l = lo(FIXED_CODE_END);
r1.h = hi(FIXED_CODE_END);
r2 = [sp + PT_PC];
cc = r1 <= r2;
if cc jump .Lresume_userspace (bp);
r0 = sp;
sp += -12;
pseudo_long_call _finish_atomic_sections, p5;
sp += 12;
jump.s .Lresume_userspace;
ENDPROC(_schedule_and_signal_from_int)
ENTRY(_schedule_and_signal)
SAVE_CONTEXT_SYSCALL
/* To end up here, vector 15 was changed - so we have to change it
* back.
*/
p0.l = lo(EVT15);
p0.h = hi(EVT15);
p1.l = _evt_system_call;
p1.h = _evt_system_call;
[p0] = p1;
csync;
p0.l = 1f;
p0.h = 1f;
[sp + PT_RESERVED] = P0;
call .Lresume_userspace;
1:
RESTORE_CONTEXT
rti;
ENDPROC(_schedule_and_signal)
/* We handle this 100% in exception space - to reduce overhead
* Only potiential problem is if the software buffer gets swapped out of the
* CPLB table - then double fault. - so we don't let this happen in other places
*/
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
ENTRY(_ex_trace_buff_full)
[--sp] = P3;
[--sp] = P2;
[--sp] = LC0;
[--sp] = LT0;
[--sp] = LB0;
P5.L = _trace_buff_offset;
P5.H = _trace_buff_offset;
P3 = [P5]; /* trace_buff_offset */
P5.L = lo(TBUFSTAT);
P5.H = hi(TBUFSTAT);
R7 = [P5];
R7 <<= 1; /* double, since we need to read twice */
LC0 = R7;
R7 <<= 2; /* need to shift over again,
* to get the number of bytes */
P5.L = lo(TBUF);
P5.H = hi(TBUF);
R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1;
P2 = R7;
P3 = P3 + P2;
R7 = P3;
R7 = R7 & R6;
P3 = R7;
P2.L = _trace_buff_offset;
P2.H = _trace_buff_offset;
[P2] = P3;
P2.L = _software_trace_buff;
P2.H = _software_trace_buff;
LSETUP (.Lstart, .Lend) LC0;
.Lstart:
R7 = [P5]; /* read TBUF */
P4 = P3 + P2;
[P4] = R7;
P3 += -4;
R7 = P3;
R7 = R7 & R6;
.Lend:
P3 = R7;
LB0 = [sp++];
LT0 = [sp++];
LC0 = [sp++];
P2 = [sp++];
P3 = [sp++];
jump _bfin_return_from_exception;
ENDPROC(_ex_trace_buff_full)
#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
.data
#else
.section .l1.data.B
#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */
ENTRY(_trace_buff_offset)
.long 0;
ALIGN
ENTRY(_software_trace_buff)
.rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256);
.long 0
.endr
#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
#ifdef CONFIG_EARLY_PRINTK
__INIT
ENTRY(_early_trap)
SAVE_ALL_SYS
trace_buffer_stop(p0,r0);
ANOMALY_283_315_WORKAROUND(p4, r5)
/* Turn caches off, to ensure we don't get double exceptions */
P4.L = LO(IMEM_CONTROL);
P4.H = HI(IMEM_CONTROL);
R5 = [P4]; /* Control Register*/
BITCLR(R5,ENICPLB_P);
CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
[P4] = R5;
SSYNC;
P4.L = LO(DMEM_CONTROL);
P4.H = HI(DMEM_CONTROL);
R5 = [P4];
BITCLR(R5,ENDCPLB_P);
CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */
[P4] = R5;
SSYNC;
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
r1 = RETX;
SP += -12;
call _early_trap_c;
SP += 12;
ENDPROC(_early_trap)
__FINIT
#endif /* CONFIG_EARLY_PRINTK */
/*
* Put these in the kernel data section - that should always be covered by
* a CPLB. This is needed to ensure we don't get double fault conditions
*/
#ifdef CONFIG_SYSCALL_TAB_L1
.section .l1.data
#else
.data
#endif
ENTRY(_ex_table)
/* entry for each EXCAUSE[5:0]
* This table must be in sync with the table in ./kernel/traps.c
* EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
*/
.long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
.long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */
#ifdef CONFIG_KGDB
.long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection
and break signal trap */
#else
.long _ex_replaceable /* 0x02 - User Defined */
#endif
.long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
.long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */
.long _ex_replaceable /* 0x05 - User Defined */
.long _ex_replaceable /* 0x06 - User Defined */
.long _ex_replaceable /* 0x07 - User Defined */
.long _ex_replaceable /* 0x08 - User Defined */
.long _ex_replaceable /* 0x09 - User Defined */
.long _ex_replaceable /* 0x0A - User Defined */
.long _ex_replaceable /* 0x0B - User Defined */
.long _ex_replaceable /* 0x0C - User Defined */
.long _ex_replaceable /* 0x0D - User Defined */
.long _ex_replaceable /* 0x0E - User Defined */
.long _ex_replaceable /* 0x0F - User Defined */
.long _ex_single_step /* 0x10 - HW Single step */
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
.long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */
#else
.long _ex_trap_c /* 0x11 - Trace Buffer Full */
#endif
.long _ex_trap_c /* 0x12 - Reserved */
.long _ex_trap_c /* 0x13 - Reserved */
.long _ex_trap_c /* 0x14 - Reserved */
.long _ex_trap_c /* 0x15 - Reserved */
.long _ex_trap_c /* 0x16 - Reserved */
.long _ex_trap_c /* 0x17 - Reserved */
.long _ex_trap_c /* 0x18 - Reserved */
.long _ex_trap_c /* 0x19 - Reserved */
.long _ex_trap_c /* 0x1A - Reserved */
.long _ex_trap_c /* 0x1B - Reserved */
.long _ex_trap_c /* 0x1C - Reserved */
.long _ex_trap_c /* 0x1D - Reserved */
.long _ex_trap_c /* 0x1E - Reserved */
.long _ex_trap_c /* 0x1F - Reserved */
.long _ex_trap_c /* 0x20 - Reserved */
.long _ex_trap_c /* 0x21 - Undefined Instruction */
.long _ex_trap_c /* 0x22 - Illegal Instruction Combination */
.long _ex_dviol /* 0x23 - Data CPLB Protection Violation */
.long _ex_trap_c /* 0x24 - Data access misaligned */
.long _ex_trap_c /* 0x25 - Unrecoverable Event */
.long _ex_dmiss /* 0x26 - Data CPLB Miss */
.long _ex_dmult /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
.long _ex_trap_c /* 0x28 - Emulation Watchpoint */
.long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */
.long _ex_trap_c /* 0x2A - Instruction fetch misaligned */
.long _ex_trap_c /* 0x2B - Instruction CPLB protection Violation */
.long _ex_icplb_miss /* 0x2C - Instruction CPLB miss */
.long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */
.long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
.long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
.long _ex_trap_c /* 0x2F - Reserved */
.long _ex_trap_c /* 0x30 - Reserved */
.long _ex_trap_c /* 0x31 - Reserved */
.long _ex_trap_c /* 0x32 - Reserved */
.long _ex_trap_c /* 0x33 - Reserved */
.long _ex_trap_c /* 0x34 - Reserved */
.long _ex_trap_c /* 0x35 - Reserved */
.long _ex_trap_c /* 0x36 - Reserved */
.long _ex_trap_c /* 0x37 - Reserved */
.long _ex_trap_c /* 0x38 - Reserved */
.long _ex_trap_c /* 0x39 - Reserved */
.long _ex_trap_c /* 0x3A - Reserved */
.long _ex_trap_c /* 0x3B - Reserved */
.long _ex_trap_c /* 0x3C - Reserved */
.long _ex_trap_c /* 0x3D - Reserved */
.long _ex_trap_c /* 0x3E - Reserved */
.long _ex_trap_c /* 0x3F - Reserved */
END(_ex_table)
ENTRY(_sys_call_table)
.long _sys_restart_syscall /* 0 */
.long _sys_exit
.long _sys_ni_syscall /* fork */
.long _sys_read
.long _sys_write
.long _sys_open /* 5 */
.long _sys_close
.long _sys_ni_syscall /* old waitpid */
.long _sys_creat
.long _sys_link
.long _sys_unlink /* 10 */
.long _sys_execve
.long _sys_chdir
.long _sys_time
.long _sys_mknod
.long _sys_chmod /* 15 */
.long _sys_chown /* chown16 */
.long _sys_ni_syscall /* old break syscall holder */
.long _sys_ni_syscall /* old stat */
.long _sys_lseek
.long _sys_getpid /* 20 */
.long _sys_mount
.long _sys_ni_syscall /* old umount */
.long _sys_setuid
.long _sys_getuid
.long _sys_stime /* 25 */
.long _sys_ptrace
.long _sys_alarm
.long _sys_ni_syscall /* old fstat */
.long _sys_pause
.long _sys_ni_syscall /* old utime */ /* 30 */
.long _sys_ni_syscall /* old stty syscall holder */
.long _sys_ni_syscall /* old gtty syscall holder */
.long _sys_access
.long _sys_nice
.long _sys_ni_syscall /* 35 */ /* old ftime syscall holder */
.long _sys_sync
.long _sys_kill
.long _sys_rename
.long _sys_mkdir
.long _sys_rmdir /* 40 */
.long _sys_dup
.long _sys_pipe
.long _sys_times
.long _sys_ni_syscall /* old prof syscall holder */
.long _sys_brk /* 45 */
.long _sys_setgid
.long _sys_getgid
.long _sys_ni_syscall /* old sys_signal */
.long _sys_geteuid /* geteuid16 */
.long _sys_getegid /* getegid16 */ /* 50 */
.long _sys_acct
.long _sys_umount /* recycled never used phys() */
.long _sys_ni_syscall /* old lock syscall holder */
.long _sys_ioctl
.long _sys_fcntl /* 55 */
.long _sys_ni_syscall /* old mpx syscall holder */
.long _sys_setpgid
.long _sys_ni_syscall /* old ulimit syscall holder */
.long _sys_ni_syscall /* old old uname */
.long _sys_umask /* 60 */
.long _sys_chroot
.long _sys_ustat
.long _sys_dup2
.long _sys_getppid
.long _sys_getpgrp /* 65 */
.long _sys_setsid
.long _sys_ni_syscall /* old sys_sigaction */
.long _sys_sgetmask
.long _sys_ssetmask
.long _sys_setreuid /* setreuid16 */ /* 70 */
.long _sys_setregid /* setregid16 */
.long _sys_ni_syscall /* old sys_sigsuspend */
.long _sys_ni_syscall /* old sys_sigpending */
.long _sys_sethostname
.long _sys_setrlimit /* 75 */
.long _sys_ni_syscall /* old getrlimit */
.long _sys_getrusage
.long _sys_gettimeofday
.long _sys_settimeofday
.long _sys_getgroups /* getgroups16 */ /* 80 */
.long _sys_setgroups /* setgroups16 */
.long _sys_ni_syscall /* old_select */
.long _sys_symlink
.long _sys_ni_syscall /* old lstat */
.long _sys_readlink /* 85 */
.long _sys_uselib
.long _sys_ni_syscall /* sys_swapon */
.long _sys_reboot
.long _sys_ni_syscall /* old_readdir */
.long _sys_ni_syscall /* sys_mmap */ /* 90 */
.long _sys_munmap
.long _sys_truncate
.long _sys_ftruncate
.long _sys_fchmod
.long _sys_fchown /* fchown16 */ /* 95 */
.long _sys_getpriority
.long _sys_setpriority
.long _sys_ni_syscall /* old profil syscall holder */
.long _sys_statfs
.long _sys_fstatfs /* 100 */
.long _sys_ni_syscall
.long _sys_ni_syscall /* old sys_socketcall */
.long _sys_syslog
.long _sys_setitimer
.long _sys_getitimer /* 105 */
.long _sys_newstat
.long _sys_newlstat
.long _sys_newfstat
.long _sys_ni_syscall /* old uname */
.long _sys_ni_syscall /* iopl for i386 */ /* 110 */
.long _sys_vhangup
.long _sys_ni_syscall /* obsolete idle() syscall */
.long _sys_ni_syscall /* vm86old for i386 */
.long _sys_wait4
.long _sys_ni_syscall /* 115 */ /* sys_swapoff */
.long _sys_sysinfo
.long _sys_ni_syscall /* old sys_ipc */
.long _sys_fsync
.long _sys_ni_syscall /* old sys_sigreturn */
.long _sys_clone /* 120 */
.long _sys_setdomainname
.long _sys_newuname
.long _sys_ni_syscall /* old sys_modify_ldt */
.long _sys_adjtimex
.long _sys_mprotect /* 125 */
.long _sys_ni_syscall /* old sys_sigprocmask */
.long _sys_ni_syscall /* old "creat_module" */
.long _sys_init_module
.long _sys_delete_module
.long _sys_ni_syscall /* 130: old "get_kernel_syms" */
.long _sys_quotactl
.long _sys_getpgid
.long _sys_fchdir
.long _sys_bdflush
.long _sys_ni_syscall /* 135 */ /* sys_sysfs */
.long _sys_personality
.long _sys_ni_syscall /* for afs_syscall */
.long _sys_setfsuid /* setfsuid16 */
.long _sys_setfsgid /* setfsgid16 */
.long _sys_llseek /* 140 */
.long _sys_getdents
.long _sys_ni_syscall /* sys_select */
.long _sys_flock
.long _sys_msync
.long _sys_readv /* 145 */
.long _sys_writev
.long _sys_getsid
.long _sys_fdatasync
.long _sys_sysctl
.long _sys_mlock /* 150 */
.long _sys_munlock
.long _sys_mlockall
.long _sys_munlockall
.long _sys_sched_setparam
.long _sys_sched_getparam /* 155 */
.long _sys_sched_setscheduler
.long _sys_sched_getscheduler
.long _sys_sched_yield
.long _sys_sched_get_priority_max
.long _sys_sched_get_priority_min /* 160 */
.long _sys_sched_rr_get_interval
.long _sys_nanosleep
.long _sys_mremap
.long _sys_setresuid /* setresuid16 */
.long _sys_getresuid /* getresuid16 */ /* 165 */
.long _sys_ni_syscall /* for vm86 */
.long _sys_ni_syscall /* old "query_module" */
.long _sys_ni_syscall /* sys_poll */
.long _sys_ni_syscall /* old nfsservctl */
.long _sys_setresgid /* setresgid16 */ /* 170 */
.long _sys_getresgid /* getresgid16 */
.long _sys_prctl
.long _sys_rt_sigreturn
.long _sys_rt_sigaction
.long _sys_rt_sigprocmask /* 175 */
.long _sys_rt_sigpending
.long _sys_rt_sigtimedwait
.long _sys_rt_sigqueueinfo
.long _sys_rt_sigsuspend
.long _sys_pread64 /* 180 */
.long _sys_pwrite64
.long _sys_lchown /* lchown16 */
.long _sys_getcwd
.long _sys_capget
.long _sys_capset /* 185 */
.long _sys_sigaltstack
.long _sys_sendfile
.long _sys_ni_syscall /* streams1 */
.long _sys_ni_syscall /* streams2 */
.long _sys_vfork /* 190 */
.long _sys_getrlimit
.long _sys_mmap_pgoff
.long _sys_truncate64
.long _sys_ftruncate64
.long _sys_stat64 /* 195 */
.long _sys_lstat64
.long _sys_fstat64
.long _sys_chown
.long _sys_getuid
.long _sys_getgid /* 200 */
.long _sys_geteuid
.long _sys_getegid
.long _sys_setreuid
.long _sys_setregid
.long _sys_getgroups /* 205 */
.long _sys_setgroups
.long _sys_fchown
.long _sys_setresuid
.long _sys_getresuid
.long _sys_setresgid /* 210 */
.long _sys_getresgid
.long _sys_lchown
.long _sys_setuid
.long _sys_setgid
.long _sys_setfsuid /* 215 */
.long _sys_setfsgid
.long _sys_pivot_root
.long _sys_mincore
.long _sys_madvise
.long _sys_getdents64 /* 220 */
.long _sys_fcntl64
.long _sys_ni_syscall /* reserved for TUX */
.long _sys_ni_syscall
.long _sys_gettid
.long _sys_readahead /* 225 */
.long _sys_setxattr
.long _sys_lsetxattr
.long _sys_fsetxattr
.long _sys_getxattr
.long _sys_lgetxattr /* 230 */
.long _sys_fgetxattr
.long _sys_listxattr
.long _sys_llistxattr
.long _sys_flistxattr
.long _sys_removexattr /* 235 */
.long _sys_lremovexattr
.long _sys_fremovexattr
.long _sys_tkill
.long _sys_sendfile64
.long _sys_futex /* 240 */
.long _sys_sched_setaffinity
.long _sys_sched_getaffinity
.long _sys_ni_syscall /* sys_set_thread_area */
.long _sys_ni_syscall /* sys_get_thread_area */
.long _sys_io_setup /* 245 */
.long _sys_io_destroy
.long _sys_io_getevents
.long _sys_io_submit
.long _sys_io_cancel
.long _sys_ni_syscall /* 250 */ /* sys_alloc_hugepages */
.long _sys_ni_syscall /* sys_freec_hugepages */
.long _sys_exit_group
.long _sys_lookup_dcookie
.long _sys_bfin_spinlock
.long _sys_epoll_create /* 255 */
.long _sys_epoll_ctl
.long _sys_epoll_wait
.long _sys_ni_syscall /* remap_file_pages */
.long _sys_set_tid_address
.long _sys_timer_create /* 260 */
.long _sys_timer_settime
.long _sys_timer_gettime
.long _sys_timer_getoverrun
.long _sys_timer_delete
.long _sys_clock_settime /* 265 */
.long _sys_clock_gettime
.long _sys_clock_getres
.long _sys_clock_nanosleep
.long _sys_statfs64
.long _sys_fstatfs64 /* 270 */
.long _sys_tgkill
.long _sys_utimes
.long _sys_fadvise64_64
.long _sys_ni_syscall /* vserver */
.long _sys_mbind /* 275 */
.long _sys_ni_syscall /* get_mempolicy */
.long _sys_ni_syscall /* set_mempolicy */
.long _sys_mq_open
.long _sys_mq_unlink
.long _sys_mq_timedsend /* 280 */
.long _sys_mq_timedreceive
.long _sys_mq_notify
.long _sys_mq_getsetattr
.long _sys_ni_syscall /* kexec_load */
.long _sys_waitid /* 285 */
.long _sys_add_key
.long _sys_request_key
.long _sys_keyctl
.long _sys_ioprio_set
.long _sys_ioprio_get /* 290 */
.long _sys_inotify_init
.long _sys_inotify_add_watch
.long _sys_inotify_rm_watch
.long _sys_ni_syscall /* migrate_pages */
.long _sys_openat /* 295 */
.long _sys_mkdirat
.long _sys_mknodat
.long _sys_fchownat
.long _sys_futimesat
.long _sys_fstatat64 /* 300 */
.long _sys_unlinkat
.long _sys_renameat
.long _sys_linkat
.long _sys_symlinkat
.long _sys_readlinkat /* 305 */
.long _sys_fchmodat
.long _sys_faccessat
.long _sys_pselect6
.long _sys_ppoll
.long _sys_unshare /* 310 */
.long _sys_sram_alloc
.long _sys_sram_free
.long _sys_dma_memcpy
.long _sys_accept
.long _sys_bind /* 315 */
.long _sys_connect
.long _sys_getpeername
.long _sys_getsockname
.long _sys_getsockopt
.long _sys_listen /* 320 */
.long _sys_recv
.long _sys_recvfrom
.long _sys_recvmsg
.long _sys_send
.long _sys_sendmsg /* 325 */
.long _sys_sendto
.long _sys_setsockopt
.long _sys_shutdown
.long _sys_socket
.long _sys_socketpair /* 330 */
.long _sys_semctl
.long _sys_semget
.long _sys_semop
.long _sys_msgctl
.long _sys_msgget /* 335 */
.long _sys_msgrcv
.long _sys_msgsnd
.long _sys_shmat
.long _sys_shmctl
.long _sys_shmdt /* 340 */
.long _sys_shmget
.long _sys_splice
.long _sys_sync_file_range
.long _sys_tee
.long _sys_vmsplice /* 345 */
.long _sys_epoll_pwait
.long _sys_utimensat
.long _sys_signalfd
.long _sys_timerfd_create
.long _sys_eventfd /* 350 */
.long _sys_pread64
.long _sys_pwrite64
.long _sys_fadvise64
.long _sys_set_robust_list
.long _sys_get_robust_list /* 355 */
.long _sys_fallocate
.long _sys_semtimedop
.long _sys_timerfd_settime
.long _sys_timerfd_gettime
.long _sys_signalfd4 /* 360 */
.long _sys_eventfd2
.long _sys_epoll_create1
.long _sys_dup3
.long _sys_pipe2
.long _sys_inotify_init1 /* 365 */
.long _sys_preadv
.long _sys_pwritev
.long _sys_rt_tgsigqueueinfo
.long _sys_perf_event_open
.long _sys_recvmmsg /* 370 */
.long _sys_fanotify_init
.long _sys_fanotify_mark
.long _sys_prlimit64
.long _sys_cacheflush
.long _sys_name_to_handle_at /* 375 */
.long _sys_open_by_handle_at
.long _sys_clock_adjtime
.long _sys_syncfs
.long _sys_setns
.long _sys_sendmmsg /* 380 */
.long _sys_process_vm_readv
.long _sys_process_vm_writev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
.endr
END(_sys_call_table)