mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 13:45:08 +07:00
3361b9c4ed
The power_up_tx() procedure needs to set a few registers conditionally to the selected video source, but it currently checks for the provided tx to be either TXA or TXB. With the introduction of dynamic routing between HDMI and AFE entities to TXA, checking which TX the function is operating on is not meaningful anymore. To fix this, store the subdevice of the source providing video data to the CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
322 lines
7.6 KiB
C
322 lines
7.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for Analog Devices ADV748X CSI-2 Transmitter
|
|
*
|
|
* Copyright (C) 2017 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
|
|
#include "adv748x.h"
|
|
|
|
static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
|
|
unsigned int vc)
|
|
{
|
|
return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* adv748x_csi2_register_link : Register and link internal entities
|
|
*
|
|
* @tx: CSI2 private entity
|
|
* @v4l2_dev: Video registration device
|
|
* @src: Source subdevice to establish link
|
|
* @src_pad: Pad number of source to link to this @tx
|
|
* @enable: Link enabled flag
|
|
*
|
|
* Ensure that the subdevice is registered against the v4l2_device, and link the
|
|
* source pad to the sink pad of the CSI2 bus entity.
|
|
*/
|
|
static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
|
|
struct v4l2_device *v4l2_dev,
|
|
struct v4l2_subdev *src,
|
|
unsigned int src_pad,
|
|
bool enable)
|
|
{
|
|
int ret;
|
|
|
|
if (!src->v4l2_dev) {
|
|
ret = v4l2_device_register_subdev(v4l2_dev, src);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = media_create_pad_link(&src->entity, src_pad,
|
|
&tx->sd.entity, ADV748X_CSI2_SINK,
|
|
enable ? MEDIA_LNK_FL_ENABLED : 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (enable)
|
|
tx->src = src;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_internal_ops
|
|
*
|
|
* We use the internal registered operation to be able to ensure that our
|
|
* incremental subdevices (not connected in the forward path) can be registered
|
|
* against the resulting video path and media device.
|
|
*/
|
|
|
|
static int adv748x_csi2_registered(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
struct adv748x_state *state = tx->state;
|
|
int ret;
|
|
|
|
adv_dbg(state, "Registered %s (%s)", is_txa(tx) ? "TXA":"TXB",
|
|
sd->name);
|
|
|
|
/*
|
|
* Link TXA to AFE and HDMI, and TXB to AFE only as TXB cannot output
|
|
* HDMI.
|
|
*
|
|
* The HDMI->TXA link is enabled by default, as is the AFE->TXB one.
|
|
*/
|
|
if (is_afe_enabled(state)) {
|
|
ret = adv748x_csi2_register_link(tx, sd->v4l2_dev,
|
|
&state->afe.sd,
|
|
ADV748X_AFE_SOURCE,
|
|
is_txb(tx));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Register link to HDMI for TXA only. */
|
|
if (is_txb(tx) || !is_hdmi_enabled(state))
|
|
return 0;
|
|
|
|
return adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
|
|
ADV748X_HDMI_SOURCE, true);
|
|
}
|
|
|
|
static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
|
|
.registered = adv748x_csi2_registered,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_video_ops
|
|
*/
|
|
|
|
static int adv748x_csi2_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
struct v4l2_subdev *src;
|
|
|
|
src = adv748x_get_remote_sd(&tx->pads[ADV748X_CSI2_SINK]);
|
|
if (!src)
|
|
return -EPIPE;
|
|
|
|
return v4l2_subdev_call(src, video, s_stream, enable);
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops adv748x_csi2_video_ops = {
|
|
.s_stream = adv748x_csi2_s_stream,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_pad_ops
|
|
*
|
|
* The CSI2 bus pads are ignorant to the data sizes or formats.
|
|
* But we must support setting the pad formats for format propagation.
|
|
*/
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
adv748x_csi2_get_pad_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
unsigned int pad, u32 which)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
|
|
if (which == V4L2_SUBDEV_FORMAT_TRY)
|
|
return v4l2_subdev_get_try_format(sd, cfg, pad);
|
|
|
|
return &tx->format;
|
|
}
|
|
|
|
static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *sdformat)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
struct adv748x_state *state = tx->state;
|
|
struct v4l2_mbus_framefmt *mbusformat;
|
|
|
|
mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad,
|
|
sdformat->which);
|
|
if (!mbusformat)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
sdformat->format = *mbusformat;
|
|
|
|
mutex_unlock(&state->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *sdformat)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
struct adv748x_state *state = tx->state;
|
|
struct v4l2_mbus_framefmt *mbusformat;
|
|
int ret = 0;
|
|
|
|
mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad,
|
|
sdformat->which);
|
|
if (!mbusformat)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
if (sdformat->pad == ADV748X_CSI2_SOURCE) {
|
|
const struct v4l2_mbus_framefmt *sink_fmt;
|
|
|
|
sink_fmt = adv748x_csi2_get_pad_format(sd, cfg,
|
|
ADV748X_CSI2_SINK,
|
|
sdformat->which);
|
|
|
|
if (!sink_fmt) {
|
|
ret = -EINVAL;
|
|
goto unlock;
|
|
}
|
|
|
|
sdformat->format = *sink_fmt;
|
|
}
|
|
|
|
*mbusformat = sdformat->format;
|
|
|
|
unlock:
|
|
mutex_unlock(&state->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
|
|
.get_fmt = adv748x_csi2_get_format,
|
|
.set_fmt = adv748x_csi2_set_format,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_ops
|
|
*/
|
|
|
|
static const struct v4l2_subdev_ops adv748x_csi2_ops = {
|
|
.video = &adv748x_csi2_video_ops,
|
|
.pad = &adv748x_csi2_pad_ops,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Subdev module and controls
|
|
*/
|
|
|
|
int adv748x_csi2_set_pixelrate(struct v4l2_subdev *sd, s64 rate)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
|
|
if (!tx->pixel_rate)
|
|
return -EINVAL;
|
|
|
|
return v4l2_ctrl_s_ctrl_int64(tx->pixel_rate, rate);
|
|
}
|
|
|
|
static int adv748x_csi2_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_PIXEL_RATE:
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops adv748x_csi2_ctrl_ops = {
|
|
.s_ctrl = adv748x_csi2_s_ctrl,
|
|
};
|
|
|
|
static int adv748x_csi2_init_controls(struct adv748x_csi2 *tx)
|
|
{
|
|
|
|
v4l2_ctrl_handler_init(&tx->ctrl_hdl, 1);
|
|
|
|
tx->pixel_rate = v4l2_ctrl_new_std(&tx->ctrl_hdl,
|
|
&adv748x_csi2_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE, 1, INT_MAX,
|
|
1, 1);
|
|
|
|
tx->sd.ctrl_handler = &tx->ctrl_hdl;
|
|
if (tx->ctrl_hdl.error) {
|
|
v4l2_ctrl_handler_free(&tx->ctrl_hdl);
|
|
return tx->ctrl_hdl.error;
|
|
}
|
|
|
|
return v4l2_ctrl_handler_setup(&tx->ctrl_hdl);
|
|
}
|
|
|
|
int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
|
|
{
|
|
int ret;
|
|
|
|
if (!is_tx_enabled(tx))
|
|
return 0;
|
|
|
|
/* Initialise the virtual channel */
|
|
adv748x_csi2_set_virtual_channel(tx, 0);
|
|
|
|
adv748x_subdev_init(&tx->sd, state, &adv748x_csi2_ops,
|
|
MEDIA_ENT_F_VID_IF_BRIDGE,
|
|
is_txa(tx) ? "txa" : "txb");
|
|
|
|
/* Ensure that matching is based upon the endpoint fwnodes */
|
|
tx->sd.fwnode = of_fwnode_handle(state->endpoints[tx->port]);
|
|
|
|
/* Register internal ops for incremental subdev registration */
|
|
tx->sd.internal_ops = &adv748x_csi2_internal_ops;
|
|
|
|
tx->pads[ADV748X_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
|
|
tx->pads[ADV748X_CSI2_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
ret = media_entity_pads_init(&tx->sd.entity, ADV748X_CSI2_NR_PADS,
|
|
tx->pads);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adv748x_csi2_init_controls(tx);
|
|
if (ret)
|
|
goto err_free_media;
|
|
|
|
ret = v4l2_async_register_subdev(&tx->sd);
|
|
if (ret)
|
|
goto err_free_ctrl;
|
|
|
|
return 0;
|
|
|
|
err_free_ctrl:
|
|
v4l2_ctrl_handler_free(&tx->ctrl_hdl);
|
|
err_free_media:
|
|
media_entity_cleanup(&tx->sd.entity);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void adv748x_csi2_cleanup(struct adv748x_csi2 *tx)
|
|
{
|
|
if (!is_tx_enabled(tx))
|
|
return;
|
|
|
|
v4l2_async_unregister_subdev(&tx->sd);
|
|
media_entity_cleanup(&tx->sd.entity);
|
|
v4l2_ctrl_handler_free(&tx->ctrl_hdl);
|
|
}
|