mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
7302b9d901
This driver has been sitting in the linux-zigbee[2] repository for a long time. We updated it from time to time and made it available via our github kernel repository. The Linux MAC802.15.4 support has improved a lot since then. Thanks to all! So it’s finally time to upstream this driver. The ADF7242 requires an add-on firmware for the automatic IEEE 802.15.4 operating modes. The firmware file is currently made available on the ADF7242 wiki page here [1] [1] http://wiki.analog.com/resources/tools-software/linux-drivers/networking-mac802154/adf7242 [2] http://sourceforge.net/p/linux-zigbee/kernel/ci/devel/tree/drivers/ieee802154/adf7242.c Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
19 lines
474 B
Plaintext
19 lines
474 B
Plaintext
* ADF7242 IEEE 802.15.4 *
|
|
|
|
Required properties:
|
|
- compatible: should be "adi,adf7242"
|
|
- spi-max-frequency: maximal bus speed (12.5 MHz)
|
|
- reg: the chipselect index
|
|
- interrupts: the interrupt generated by the device via pin IRQ1.
|
|
IRQ_TYPE_LEVEL_HIGH (4) or IRQ_TYPE_EDGE_FALLING (1)
|
|
|
|
Example:
|
|
|
|
adf7242@0 {
|
|
compatible = "adi,adf7242";
|
|
spi-max-frequency = <10000000>;
|
|
reg = <0>;
|
|
interrupts = <98 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&gpio3>;
|
|
};
|