mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-03 01:16:40 +07:00
7bd89b4017
Commit fccf4e8620
"USB: Free bandwidth when usb_disable_device is called" caused a bit of an
issue when the xHCI host controller driver is unloaded. It changed the
USB core to remove all endpoints when a USB device is disabled. When the
driver is unloaded, it will remove the SuperSpeed split root hub, which
will disable all devices under that roothub and then halt the host
controller. When the second High Speed split roothub is removed, the USB
core will attempt to disable the endpoints, which will submit a Configure
Endpoint command to a halted host controller.
The command will eventually time out, but it makes the xHCI driver unload
take *minutes* if there are a couple of USB 1.1/2.0 devices attached. We
must halt the host controller when the SuperSpeed roothub is removed,
because we can't allow any interrupts from things like port status
changes.
Make several different functions not submit commands or URBs to the host
controller when the host is halted, by adding a check in
xhci_check_args(). xhci_check_args() is used by these functions:
xhci.c-int xhci_urb_enqueue()
xhci.c-int xhci_drop_endpoint()
xhci.c-int xhci_add_endpoint()
xhci.c-int xhci_check_bandwidth()
xhci.c-void xhci_reset_bandwidth()
xhci.c-static int xhci_check_streams_endpoint()
xhci.c-int xhci_discover_or_reset_device()
It's also used by xhci_free_dev(). However, we have to take special
care in that case, because we want the device memory to be freed if the
host controller is halted.
This patch should be backported to the 2.6.39 and 3.0 kernel.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@kernel.org
3079 lines
94 KiB
C
3079 lines
94 KiB
C
/*
|
|
* xHCI host controller driver
|
|
*
|
|
* Copyright (C) 2008 Intel Corp.
|
|
*
|
|
* Author: Sarah Sharp
|
|
* Some code borrowed from the Linux EHCI driver.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "xhci.h"
|
|
|
|
#define DRIVER_AUTHOR "Sarah Sharp"
|
|
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
|
|
|
|
/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
|
|
static int link_quirk;
|
|
module_param(link_quirk, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
|
|
|
|
/* TODO: copied from ehci-hcd.c - can this be refactored? */
|
|
/*
|
|
* handshake - spin reading hc until handshake completes or fails
|
|
* @ptr: address of hc register to be read
|
|
* @mask: bits to look at in result of read
|
|
* @done: value of those bits when handshake succeeds
|
|
* @usec: timeout in microseconds
|
|
*
|
|
* Returns negative errno, or zero on success
|
|
*
|
|
* Success happens when the "mask" bits have the specified value (hardware
|
|
* handshake done). There are two failure modes: "usec" have passed (major
|
|
* hardware flakeout), or the register reads as all-ones (hardware removed).
|
|
*/
|
|
static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
|
|
u32 mask, u32 done, int usec)
|
|
{
|
|
u32 result;
|
|
|
|
do {
|
|
result = xhci_readl(xhci, ptr);
|
|
if (result == ~(u32)0) /* card removed */
|
|
return -ENODEV;
|
|
result &= mask;
|
|
if (result == done)
|
|
return 0;
|
|
udelay(1);
|
|
usec--;
|
|
} while (usec > 0);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* Disable interrupts and begin the xHCI halting process.
|
|
*/
|
|
void xhci_quiesce(struct xhci_hcd *xhci)
|
|
{
|
|
u32 halted;
|
|
u32 cmd;
|
|
u32 mask;
|
|
|
|
mask = ~(XHCI_IRQS);
|
|
halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT;
|
|
if (!halted)
|
|
mask &= ~CMD_RUN;
|
|
|
|
cmd = xhci_readl(xhci, &xhci->op_regs->command);
|
|
cmd &= mask;
|
|
xhci_writel(xhci, cmd, &xhci->op_regs->command);
|
|
}
|
|
|
|
/*
|
|
* Force HC into halt state.
|
|
*
|
|
* Disable any IRQs and clear the run/stop bit.
|
|
* HC will complete any current and actively pipelined transactions, and
|
|
* should halt within 16 ms of the run/stop bit being cleared.
|
|
* Read HC Halted bit in the status register to see when the HC is finished.
|
|
*/
|
|
int xhci_halt(struct xhci_hcd *xhci)
|
|
{
|
|
int ret;
|
|
xhci_dbg(xhci, "// Halt the HC\n");
|
|
xhci_quiesce(xhci);
|
|
|
|
ret = handshake(xhci, &xhci->op_regs->status,
|
|
STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
|
|
if (!ret)
|
|
xhci->xhc_state |= XHCI_STATE_HALTED;
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Set the run bit and wait for the host to be running.
|
|
*/
|
|
static int xhci_start(struct xhci_hcd *xhci)
|
|
{
|
|
u32 temp;
|
|
int ret;
|
|
|
|
temp = xhci_readl(xhci, &xhci->op_regs->command);
|
|
temp |= (CMD_RUN);
|
|
xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
|
|
temp);
|
|
xhci_writel(xhci, temp, &xhci->op_regs->command);
|
|
|
|
/*
|
|
* Wait for the HCHalted Status bit to be 0 to indicate the host is
|
|
* running.
|
|
*/
|
|
ret = handshake(xhci, &xhci->op_regs->status,
|
|
STS_HALT, 0, XHCI_MAX_HALT_USEC);
|
|
if (ret == -ETIMEDOUT)
|
|
xhci_err(xhci, "Host took too long to start, "
|
|
"waited %u microseconds.\n",
|
|
XHCI_MAX_HALT_USEC);
|
|
if (!ret)
|
|
xhci->xhc_state &= ~XHCI_STATE_HALTED;
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Reset a halted HC.
|
|
*
|
|
* This resets pipelines, timers, counters, state machines, etc.
|
|
* Transactions will be terminated immediately, and operational registers
|
|
* will be set to their defaults.
|
|
*/
|
|
int xhci_reset(struct xhci_hcd *xhci)
|
|
{
|
|
u32 command;
|
|
u32 state;
|
|
int ret;
|
|
|
|
state = xhci_readl(xhci, &xhci->op_regs->status);
|
|
if ((state & STS_HALT) == 0) {
|
|
xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
|
|
return 0;
|
|
}
|
|
|
|
xhci_dbg(xhci, "// Reset the HC\n");
|
|
command = xhci_readl(xhci, &xhci->op_regs->command);
|
|
command |= CMD_RESET;
|
|
xhci_writel(xhci, command, &xhci->op_regs->command);
|
|
|
|
ret = handshake(xhci, &xhci->op_regs->command,
|
|
CMD_RESET, 0, 250 * 1000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
xhci_dbg(xhci, "Wait for controller to be ready for doorbell rings\n");
|
|
/*
|
|
* xHCI cannot write to any doorbells or operational registers other
|
|
* than status until the "Controller Not Ready" flag is cleared.
|
|
*/
|
|
return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
|
|
}
|
|
|
|
/*
|
|
* Free IRQs
|
|
* free all IRQs request
|
|
*/
|
|
static void xhci_free_irq(struct xhci_hcd *xhci)
|
|
{
|
|
int i;
|
|
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
|
|
|
|
/* return if using legacy interrupt */
|
|
if (xhci_to_hcd(xhci)->irq >= 0)
|
|
return;
|
|
|
|
if (xhci->msix_entries) {
|
|
for (i = 0; i < xhci->msix_count; i++)
|
|
if (xhci->msix_entries[i].vector)
|
|
free_irq(xhci->msix_entries[i].vector,
|
|
xhci_to_hcd(xhci));
|
|
} else if (pdev->irq >= 0)
|
|
free_irq(pdev->irq, xhci_to_hcd(xhci));
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set up MSI
|
|
*/
|
|
static int xhci_setup_msi(struct xhci_hcd *xhci)
|
|
{
|
|
int ret;
|
|
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
|
|
|
|
ret = pci_enable_msi(pdev);
|
|
if (ret) {
|
|
xhci_err(xhci, "failed to allocate MSI entry\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq,
|
|
0, "xhci_hcd", xhci_to_hcd(xhci));
|
|
if (ret) {
|
|
xhci_err(xhci, "disable MSI interrupt\n");
|
|
pci_disable_msi(pdev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Set up MSI-X
|
|
*/
|
|
static int xhci_setup_msix(struct xhci_hcd *xhci)
|
|
{
|
|
int i, ret = 0;
|
|
struct usb_hcd *hcd = xhci_to_hcd(xhci);
|
|
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
|
|
|
|
/*
|
|
* calculate number of msi-x vectors supported.
|
|
* - HCS_MAX_INTRS: the max number of interrupts the host can handle,
|
|
* with max number of interrupters based on the xhci HCSPARAMS1.
|
|
* - num_online_cpus: maximum msi-x vectors per CPUs core.
|
|
* Add additional 1 vector to ensure always available interrupt.
|
|
*/
|
|
xhci->msix_count = min(num_online_cpus() + 1,
|
|
HCS_MAX_INTRS(xhci->hcs_params1));
|
|
|
|
xhci->msix_entries =
|
|
kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
|
|
GFP_KERNEL);
|
|
if (!xhci->msix_entries) {
|
|
xhci_err(xhci, "Failed to allocate MSI-X entries\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < xhci->msix_count; i++) {
|
|
xhci->msix_entries[i].entry = i;
|
|
xhci->msix_entries[i].vector = 0;
|
|
}
|
|
|
|
ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
|
|
if (ret) {
|
|
xhci_err(xhci, "Failed to enable MSI-X\n");
|
|
goto free_entries;
|
|
}
|
|
|
|
for (i = 0; i < xhci->msix_count; i++) {
|
|
ret = request_irq(xhci->msix_entries[i].vector,
|
|
(irq_handler_t)xhci_msi_irq,
|
|
0, "xhci_hcd", xhci_to_hcd(xhci));
|
|
if (ret)
|
|
goto disable_msix;
|
|
}
|
|
|
|
hcd->msix_enabled = 1;
|
|
return ret;
|
|
|
|
disable_msix:
|
|
xhci_err(xhci, "disable MSI-X interrupt\n");
|
|
xhci_free_irq(xhci);
|
|
pci_disable_msix(pdev);
|
|
free_entries:
|
|
kfree(xhci->msix_entries);
|
|
xhci->msix_entries = NULL;
|
|
return ret;
|
|
}
|
|
|
|
/* Free any IRQs and disable MSI-X */
|
|
static void xhci_cleanup_msix(struct xhci_hcd *xhci)
|
|
{
|
|
struct usb_hcd *hcd = xhci_to_hcd(xhci);
|
|
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
|
|
|
|
xhci_free_irq(xhci);
|
|
|
|
if (xhci->msix_entries) {
|
|
pci_disable_msix(pdev);
|
|
kfree(xhci->msix_entries);
|
|
xhci->msix_entries = NULL;
|
|
} else {
|
|
pci_disable_msi(pdev);
|
|
}
|
|
|
|
hcd->msix_enabled = 0;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Initialize memory for HCD and xHC (one-time init).
|
|
*
|
|
* Program the PAGESIZE register, initialize the device context array, create
|
|
* device contexts (?), set up a command ring segment (or two?), create event
|
|
* ring (one for now).
|
|
*/
|
|
int xhci_init(struct usb_hcd *hcd)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
int retval = 0;
|
|
|
|
xhci_dbg(xhci, "xhci_init\n");
|
|
spin_lock_init(&xhci->lock);
|
|
if (link_quirk) {
|
|
xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n");
|
|
xhci->quirks |= XHCI_LINK_TRB_QUIRK;
|
|
} else {
|
|
xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n");
|
|
}
|
|
retval = xhci_mem_init(xhci, GFP_KERNEL);
|
|
xhci_dbg(xhci, "Finished xhci_init\n");
|
|
|
|
return retval;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
|
|
static void xhci_event_ring_work(unsigned long arg)
|
|
{
|
|
unsigned long flags;
|
|
int temp;
|
|
u64 temp_64;
|
|
struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
|
|
int i, j;
|
|
|
|
xhci_dbg(xhci, "Poll event ring: %lu\n", jiffies);
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
temp = xhci_readl(xhci, &xhci->op_regs->status);
|
|
xhci_dbg(xhci, "op reg status = 0x%x\n", temp);
|
|
if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
|
|
(xhci->xhc_state & XHCI_STATE_HALTED)) {
|
|
xhci_dbg(xhci, "HW died, polling stopped.\n");
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return;
|
|
}
|
|
|
|
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
|
|
xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
|
|
xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask);
|
|
xhci->error_bitmask = 0;
|
|
xhci_dbg(xhci, "Event ring:\n");
|
|
xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
|
|
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
|
|
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
|
|
temp_64 &= ~ERST_PTR_MASK;
|
|
xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
|
|
xhci_dbg(xhci, "Command ring:\n");
|
|
xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
|
|
xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
|
|
xhci_dbg_cmd_ptrs(xhci);
|
|
for (i = 0; i < MAX_HC_SLOTS; ++i) {
|
|
if (!xhci->devs[i])
|
|
continue;
|
|
for (j = 0; j < 31; ++j) {
|
|
xhci_dbg_ep_rings(xhci, i, j, &xhci->devs[i]->eps[j]);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
if (!xhci->zombie)
|
|
mod_timer(&xhci->event_ring_timer, jiffies + POLL_TIMEOUT * HZ);
|
|
else
|
|
xhci_dbg(xhci, "Quit polling the event ring.\n");
|
|
}
|
|
#endif
|
|
|
|
static int xhci_run_finished(struct xhci_hcd *xhci)
|
|
{
|
|
if (xhci_start(xhci)) {
|
|
xhci_halt(xhci);
|
|
return -ENODEV;
|
|
}
|
|
xhci->shared_hcd->state = HC_STATE_RUNNING;
|
|
|
|
if (xhci->quirks & XHCI_NEC_HOST)
|
|
xhci_ring_cmd_db(xhci);
|
|
|
|
xhci_dbg(xhci, "Finished xhci_run for USB3 roothub\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Start the HC after it was halted.
|
|
*
|
|
* This function is called by the USB core when the HC driver is added.
|
|
* Its opposite is xhci_stop().
|
|
*
|
|
* xhci_init() must be called once before this function can be called.
|
|
* Reset the HC, enable device slot contexts, program DCBAAP, and
|
|
* set command ring pointer and event ring pointer.
|
|
*
|
|
* Setup MSI-X vectors and enable interrupts.
|
|
*/
|
|
int xhci_run(struct usb_hcd *hcd)
|
|
{
|
|
u32 temp;
|
|
u64 temp_64;
|
|
u32 ret;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
|
|
|
|
/* Start the xHCI host controller running only after the USB 2.0 roothub
|
|
* is setup.
|
|
*/
|
|
|
|
hcd->uses_new_polling = 1;
|
|
if (!usb_hcd_is_primary_hcd(hcd))
|
|
return xhci_run_finished(xhci);
|
|
|
|
xhci_dbg(xhci, "xhci_run\n");
|
|
/* unregister the legacy interrupt */
|
|
if (hcd->irq)
|
|
free_irq(hcd->irq, hcd);
|
|
hcd->irq = -1;
|
|
|
|
/* Some Fresco Logic host controllers advertise MSI, but fail to
|
|
* generate interrupts. Don't even try to enable MSI.
|
|
*/
|
|
if (xhci->quirks & XHCI_BROKEN_MSI)
|
|
goto legacy_irq;
|
|
|
|
ret = xhci_setup_msix(xhci);
|
|
if (ret)
|
|
/* fall back to msi*/
|
|
ret = xhci_setup_msi(xhci);
|
|
|
|
if (ret) {
|
|
legacy_irq:
|
|
/* fall back to legacy interrupt*/
|
|
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
|
|
hcd->irq_descr, hcd);
|
|
if (ret) {
|
|
xhci_err(xhci, "request interrupt %d failed\n",
|
|
pdev->irq);
|
|
return ret;
|
|
}
|
|
hcd->irq = pdev->irq;
|
|
}
|
|
|
|
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
|
|
init_timer(&xhci->event_ring_timer);
|
|
xhci->event_ring_timer.data = (unsigned long) xhci;
|
|
xhci->event_ring_timer.function = xhci_event_ring_work;
|
|
/* Poll the event ring */
|
|
xhci->event_ring_timer.expires = jiffies + POLL_TIMEOUT * HZ;
|
|
xhci->zombie = 0;
|
|
xhci_dbg(xhci, "Setting event ring polling timer\n");
|
|
add_timer(&xhci->event_ring_timer);
|
|
#endif
|
|
|
|
xhci_dbg(xhci, "Command ring memory map follows:\n");
|
|
xhci_debug_ring(xhci, xhci->cmd_ring);
|
|
xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
|
|
xhci_dbg_cmd_ptrs(xhci);
|
|
|
|
xhci_dbg(xhci, "ERST memory map follows:\n");
|
|
xhci_dbg_erst(xhci, &xhci->erst);
|
|
xhci_dbg(xhci, "Event ring:\n");
|
|
xhci_debug_ring(xhci, xhci->event_ring);
|
|
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
|
|
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
|
|
temp_64 &= ~ERST_PTR_MASK;
|
|
xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
|
|
|
|
xhci_dbg(xhci, "// Set the interrupt modulation register\n");
|
|
temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
|
|
temp &= ~ER_IRQ_INTERVAL_MASK;
|
|
temp |= (u32) 160;
|
|
xhci_writel(xhci, temp, &xhci->ir_set->irq_control);
|
|
|
|
/* Set the HCD state before we enable the irqs */
|
|
temp = xhci_readl(xhci, &xhci->op_regs->command);
|
|
temp |= (CMD_EIE);
|
|
xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n",
|
|
temp);
|
|
xhci_writel(xhci, temp, &xhci->op_regs->command);
|
|
|
|
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
|
|
xhci_dbg(xhci, "// Enabling event ring interrupter %p by writing 0x%x to irq_pending\n",
|
|
xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
|
|
xhci_writel(xhci, ER_IRQ_ENABLE(temp),
|
|
&xhci->ir_set->irq_pending);
|
|
xhci_print_ir_set(xhci, 0);
|
|
|
|
if (xhci->quirks & XHCI_NEC_HOST)
|
|
xhci_queue_vendor_command(xhci, 0, 0, 0,
|
|
TRB_TYPE(TRB_NEC_GET_FW));
|
|
|
|
xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n");
|
|
return 0;
|
|
}
|
|
|
|
static void xhci_only_stop_hcd(struct usb_hcd *hcd)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
spin_lock_irq(&xhci->lock);
|
|
xhci_halt(xhci);
|
|
|
|
/* The shared_hcd is going to be deallocated shortly (the USB core only
|
|
* calls this function when allocation fails in usb_add_hcd(), or
|
|
* usb_remove_hcd() is called). So we need to unset xHCI's pointer.
|
|
*/
|
|
xhci->shared_hcd = NULL;
|
|
spin_unlock_irq(&xhci->lock);
|
|
}
|
|
|
|
/*
|
|
* Stop xHCI driver.
|
|
*
|
|
* This function is called by the USB core when the HC driver is removed.
|
|
* Its opposite is xhci_run().
|
|
*
|
|
* Disable device contexts, disable IRQs, and quiesce the HC.
|
|
* Reset the HC, finish any completed transactions, and cleanup memory.
|
|
*/
|
|
void xhci_stop(struct usb_hcd *hcd)
|
|
{
|
|
u32 temp;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
if (!usb_hcd_is_primary_hcd(hcd)) {
|
|
xhci_only_stop_hcd(xhci->shared_hcd);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irq(&xhci->lock);
|
|
/* Make sure the xHC is halted for a USB3 roothub
|
|
* (xhci_stop() could be called as part of failed init).
|
|
*/
|
|
xhci_halt(xhci);
|
|
xhci_reset(xhci);
|
|
spin_unlock_irq(&xhci->lock);
|
|
|
|
xhci_cleanup_msix(xhci);
|
|
|
|
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
|
|
/* Tell the event ring poll function not to reschedule */
|
|
xhci->zombie = 1;
|
|
del_timer_sync(&xhci->event_ring_timer);
|
|
#endif
|
|
|
|
if (xhci->quirks & XHCI_AMD_PLL_FIX)
|
|
usb_amd_dev_put();
|
|
|
|
xhci_dbg(xhci, "// Disabling event ring interrupts\n");
|
|
temp = xhci_readl(xhci, &xhci->op_regs->status);
|
|
xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
|
|
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
|
|
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
|
|
&xhci->ir_set->irq_pending);
|
|
xhci_print_ir_set(xhci, 0);
|
|
|
|
xhci_dbg(xhci, "cleaning up memory\n");
|
|
xhci_mem_cleanup(xhci);
|
|
xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
|
|
xhci_readl(xhci, &xhci->op_regs->status));
|
|
}
|
|
|
|
/*
|
|
* Shutdown HC (not bus-specific)
|
|
*
|
|
* This is called when the machine is rebooting or halting. We assume that the
|
|
* machine will be powered off, and the HC's internal state will be reset.
|
|
* Don't bother to free memory.
|
|
*
|
|
* This will only ever be called with the main usb_hcd (the USB3 roothub).
|
|
*/
|
|
void xhci_shutdown(struct usb_hcd *hcd)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
|
|
spin_lock_irq(&xhci->lock);
|
|
xhci_halt(xhci);
|
|
spin_unlock_irq(&xhci->lock);
|
|
|
|
xhci_cleanup_msix(xhci);
|
|
|
|
xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n",
|
|
xhci_readl(xhci, &xhci->op_regs->status));
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void xhci_save_registers(struct xhci_hcd *xhci)
|
|
{
|
|
xhci->s3.command = xhci_readl(xhci, &xhci->op_regs->command);
|
|
xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
|
|
xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
|
|
xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
|
|
xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
|
|
xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
|
|
xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
|
|
xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
|
|
xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
|
|
}
|
|
|
|
static void xhci_restore_registers(struct xhci_hcd *xhci)
|
|
{
|
|
xhci_writel(xhci, xhci->s3.command, &xhci->op_regs->command);
|
|
xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
|
|
xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
|
|
xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
|
|
xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
|
|
xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
|
|
xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
|
|
xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
|
|
}
|
|
|
|
static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
|
|
{
|
|
u64 val_64;
|
|
|
|
/* step 2: initialize command ring buffer */
|
|
val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
|
|
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
|
|
(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
|
|
xhci->cmd_ring->dequeue) &
|
|
(u64) ~CMD_RING_RSVD_BITS) |
|
|
xhci->cmd_ring->cycle_state;
|
|
xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
|
|
(long unsigned long) val_64);
|
|
xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
|
|
}
|
|
|
|
/*
|
|
* The whole command ring must be cleared to zero when we suspend the host.
|
|
*
|
|
* The host doesn't save the command ring pointer in the suspend well, so we
|
|
* need to re-program it on resume. Unfortunately, the pointer must be 64-byte
|
|
* aligned, because of the reserved bits in the command ring dequeue pointer
|
|
* register. Therefore, we can't just set the dequeue pointer back in the
|
|
* middle of the ring (TRBs are 16-byte aligned).
|
|
*/
|
|
static void xhci_clear_command_ring(struct xhci_hcd *xhci)
|
|
{
|
|
struct xhci_ring *ring;
|
|
struct xhci_segment *seg;
|
|
|
|
ring = xhci->cmd_ring;
|
|
seg = ring->deq_seg;
|
|
do {
|
|
memset(seg->trbs, 0, SEGMENT_SIZE);
|
|
seg = seg->next;
|
|
} while (seg != ring->deq_seg);
|
|
|
|
/* Reset the software enqueue and dequeue pointers */
|
|
ring->deq_seg = ring->first_seg;
|
|
ring->dequeue = ring->first_seg->trbs;
|
|
ring->enq_seg = ring->deq_seg;
|
|
ring->enqueue = ring->dequeue;
|
|
|
|
/*
|
|
* Ring is now zeroed, so the HW should look for change of ownership
|
|
* when the cycle bit is set to 1.
|
|
*/
|
|
ring->cycle_state = 1;
|
|
|
|
/*
|
|
* Reset the hardware dequeue pointer.
|
|
* Yes, this will need to be re-written after resume, but we're paranoid
|
|
* and want to make sure the hardware doesn't access bogus memory
|
|
* because, say, the BIOS or an SMI started the host without changing
|
|
* the command ring pointers.
|
|
*/
|
|
xhci_set_cmd_ring_deq(xhci);
|
|
}
|
|
|
|
/*
|
|
* Stop HC (not bus-specific)
|
|
*
|
|
* This is called when the machine transition into S3/S4 mode.
|
|
*
|
|
*/
|
|
int xhci_suspend(struct xhci_hcd *xhci)
|
|
{
|
|
int rc = 0;
|
|
struct usb_hcd *hcd = xhci_to_hcd(xhci);
|
|
u32 command;
|
|
int i;
|
|
|
|
spin_lock_irq(&xhci->lock);
|
|
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
|
|
/* step 1: stop endpoint */
|
|
/* skipped assuming that port suspend has done */
|
|
|
|
/* step 2: clear Run/Stop bit */
|
|
command = xhci_readl(xhci, &xhci->op_regs->command);
|
|
command &= ~CMD_RUN;
|
|
xhci_writel(xhci, command, &xhci->op_regs->command);
|
|
if (handshake(xhci, &xhci->op_regs->status,
|
|
STS_HALT, STS_HALT, 100*100)) {
|
|
xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
|
|
spin_unlock_irq(&xhci->lock);
|
|
return -ETIMEDOUT;
|
|
}
|
|
xhci_clear_command_ring(xhci);
|
|
|
|
/* step 3: save registers */
|
|
xhci_save_registers(xhci);
|
|
|
|
/* step 4: set CSS flag */
|
|
command = xhci_readl(xhci, &xhci->op_regs->command);
|
|
command |= CMD_CSS;
|
|
xhci_writel(xhci, command, &xhci->op_regs->command);
|
|
if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
|
|
xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
|
|
spin_unlock_irq(&xhci->lock);
|
|
return -ETIMEDOUT;
|
|
}
|
|
spin_unlock_irq(&xhci->lock);
|
|
|
|
/* step 5: remove core well power */
|
|
/* synchronize irq when using MSI-X */
|
|
if (xhci->msix_entries) {
|
|
for (i = 0; i < xhci->msix_count; i++)
|
|
synchronize_irq(xhci->msix_entries[i].vector);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* start xHC (not bus-specific)
|
|
*
|
|
* This is called when the machine transition from S3/S4 mode.
|
|
*
|
|
*/
|
|
int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
|
|
{
|
|
u32 command, temp = 0;
|
|
struct usb_hcd *hcd = xhci_to_hcd(xhci);
|
|
struct usb_hcd *secondary_hcd;
|
|
int retval;
|
|
|
|
/* Wait a bit if either of the roothubs need to settle from the
|
|
* transition into bus suspend.
|
|
*/
|
|
if (time_before(jiffies, xhci->bus_state[0].next_statechange) ||
|
|
time_before(jiffies,
|
|
xhci->bus_state[1].next_statechange))
|
|
msleep(100);
|
|
|
|
spin_lock_irq(&xhci->lock);
|
|
if (xhci->quirks & XHCI_RESET_ON_RESUME)
|
|
hibernated = true;
|
|
|
|
if (!hibernated) {
|
|
/* step 1: restore register */
|
|
xhci_restore_registers(xhci);
|
|
/* step 2: initialize command ring buffer */
|
|
xhci_set_cmd_ring_deq(xhci);
|
|
/* step 3: restore state and start state*/
|
|
/* step 3: set CRS flag */
|
|
command = xhci_readl(xhci, &xhci->op_regs->command);
|
|
command |= CMD_CRS;
|
|
xhci_writel(xhci, command, &xhci->op_regs->command);
|
|
if (handshake(xhci, &xhci->op_regs->status,
|
|
STS_RESTORE, 0, 10*100)) {
|
|
xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
|
|
spin_unlock_irq(&xhci->lock);
|
|
return -ETIMEDOUT;
|
|
}
|
|
temp = xhci_readl(xhci, &xhci->op_regs->status);
|
|
}
|
|
|
|
/* If restore operation fails, re-initialize the HC during resume */
|
|
if ((temp & STS_SRE) || hibernated) {
|
|
/* Let the USB core know _both_ roothubs lost power. */
|
|
usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
|
|
usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
|
|
|
|
xhci_dbg(xhci, "Stop HCD\n");
|
|
xhci_halt(xhci);
|
|
xhci_reset(xhci);
|
|
spin_unlock_irq(&xhci->lock);
|
|
xhci_cleanup_msix(xhci);
|
|
|
|
#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
|
|
/* Tell the event ring poll function not to reschedule */
|
|
xhci->zombie = 1;
|
|
del_timer_sync(&xhci->event_ring_timer);
|
|
#endif
|
|
|
|
xhci_dbg(xhci, "// Disabling event ring interrupts\n");
|
|
temp = xhci_readl(xhci, &xhci->op_regs->status);
|
|
xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
|
|
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
|
|
xhci_writel(xhci, ER_IRQ_DISABLE(temp),
|
|
&xhci->ir_set->irq_pending);
|
|
xhci_print_ir_set(xhci, 0);
|
|
|
|
xhci_dbg(xhci, "cleaning up memory\n");
|
|
xhci_mem_cleanup(xhci);
|
|
xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
|
|
xhci_readl(xhci, &xhci->op_regs->status));
|
|
|
|
/* USB core calls the PCI reinit and start functions twice:
|
|
* first with the primary HCD, and then with the secondary HCD.
|
|
* If we don't do the same, the host will never be started.
|
|
*/
|
|
if (!usb_hcd_is_primary_hcd(hcd))
|
|
secondary_hcd = hcd;
|
|
else
|
|
secondary_hcd = xhci->shared_hcd;
|
|
|
|
xhci_dbg(xhci, "Initialize the xhci_hcd\n");
|
|
retval = xhci_init(hcd->primary_hcd);
|
|
if (retval)
|
|
return retval;
|
|
xhci_dbg(xhci, "Start the primary HCD\n");
|
|
retval = xhci_run(hcd->primary_hcd);
|
|
if (retval)
|
|
goto failed_restart;
|
|
|
|
xhci_dbg(xhci, "Start the secondary HCD\n");
|
|
retval = xhci_run(secondary_hcd);
|
|
if (!retval) {
|
|
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
set_bit(HCD_FLAG_HW_ACCESSIBLE,
|
|
&xhci->shared_hcd->flags);
|
|
}
|
|
failed_restart:
|
|
hcd->state = HC_STATE_SUSPENDED;
|
|
xhci->shared_hcd->state = HC_STATE_SUSPENDED;
|
|
return retval;
|
|
}
|
|
|
|
/* step 4: set Run/Stop bit */
|
|
command = xhci_readl(xhci, &xhci->op_regs->command);
|
|
command |= CMD_RUN;
|
|
xhci_writel(xhci, command, &xhci->op_regs->command);
|
|
handshake(xhci, &xhci->op_regs->status, STS_HALT,
|
|
0, 250 * 1000);
|
|
|
|
/* step 5: walk topology and initialize portsc,
|
|
* portpmsc and portli
|
|
*/
|
|
/* this is done in bus_resume */
|
|
|
|
/* step 6: restart each of the previously
|
|
* Running endpoints by ringing their doorbells
|
|
*/
|
|
|
|
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
|
|
|
|
spin_unlock_irq(&xhci->lock);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
* xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and
|
|
* HCDs. Find the index for an endpoint given its descriptor. Use the return
|
|
* value to right shift 1 for the bitmask.
|
|
*
|
|
* Index = (epnum * 2) + direction - 1,
|
|
* where direction = 0 for OUT, 1 for IN.
|
|
* For control endpoints, the IN index is used (OUT index is unused), so
|
|
* index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
|
|
*/
|
|
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
|
|
{
|
|
unsigned int index;
|
|
if (usb_endpoint_xfer_control(desc))
|
|
index = (unsigned int) (usb_endpoint_num(desc)*2);
|
|
else
|
|
index = (unsigned int) (usb_endpoint_num(desc)*2) +
|
|
(usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
|
|
return index;
|
|
}
|
|
|
|
/* Find the flag for this endpoint (for use in the control context). Use the
|
|
* endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
|
|
* bit 1, etc.
|
|
*/
|
|
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
|
|
{
|
|
return 1 << (xhci_get_endpoint_index(desc) + 1);
|
|
}
|
|
|
|
/* Find the flag for this endpoint (for use in the control context). Use the
|
|
* endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
|
|
* bit 1, etc.
|
|
*/
|
|
unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index)
|
|
{
|
|
return 1 << (ep_index + 1);
|
|
}
|
|
|
|
/* Compute the last valid endpoint context index. Basically, this is the
|
|
* endpoint index plus one. For slot contexts with more than valid endpoint,
|
|
* we find the most significant bit set in the added contexts flags.
|
|
* e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
|
|
* fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
|
|
*/
|
|
unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
|
|
{
|
|
return fls(added_ctxs) - 1;
|
|
}
|
|
|
|
/* Returns 1 if the arguments are OK;
|
|
* returns 0 this is a root hub; returns -EINVAL for NULL pointers.
|
|
*/
|
|
static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev,
|
|
const char *func) {
|
|
struct xhci_hcd *xhci;
|
|
struct xhci_virt_device *virt_dev;
|
|
|
|
if (!hcd || (check_ep && !ep) || !udev) {
|
|
printk(KERN_DEBUG "xHCI %s called with invalid args\n",
|
|
func);
|
|
return -EINVAL;
|
|
}
|
|
if (!udev->parent) {
|
|
printk(KERN_DEBUG "xHCI %s called for root hub\n",
|
|
func);
|
|
return 0;
|
|
}
|
|
|
|
xhci = hcd_to_xhci(hcd);
|
|
if (xhci->xhc_state & XHCI_STATE_HALTED)
|
|
return -ENODEV;
|
|
|
|
if (check_virt_dev) {
|
|
if (!udev->slot_id || !xhci->devs
|
|
|| !xhci->devs[udev->slot_id]) {
|
|
printk(KERN_DEBUG "xHCI %s called with unaddressed "
|
|
"device\n", func);
|
|
return -EINVAL;
|
|
}
|
|
|
|
virt_dev = xhci->devs[udev->slot_id];
|
|
if (virt_dev->udev != udev) {
|
|
printk(KERN_DEBUG "xHCI %s called with udev and "
|
|
"virt_dev does not match\n", func);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int xhci_configure_endpoint(struct xhci_hcd *xhci,
|
|
struct usb_device *udev, struct xhci_command *command,
|
|
bool ctx_change, bool must_succeed);
|
|
|
|
/*
|
|
* Full speed devices may have a max packet size greater than 8 bytes, but the
|
|
* USB core doesn't know that until it reads the first 8 bytes of the
|
|
* descriptor. If the usb_device's max packet size changes after that point,
|
|
* we need to issue an evaluate context command and wait on it.
|
|
*/
|
|
static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
|
|
unsigned int ep_index, struct urb *urb)
|
|
{
|
|
struct xhci_container_ctx *in_ctx;
|
|
struct xhci_container_ctx *out_ctx;
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
int max_packet_size;
|
|
int hw_max_packet_size;
|
|
int ret = 0;
|
|
|
|
out_ctx = xhci->devs[slot_id]->out_ctx;
|
|
ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
|
|
hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
|
|
max_packet_size = le16_to_cpu(urb->dev->ep0.desc.wMaxPacketSize);
|
|
if (hw_max_packet_size != max_packet_size) {
|
|
xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
|
|
xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
|
|
max_packet_size);
|
|
xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n",
|
|
hw_max_packet_size);
|
|
xhci_dbg(xhci, "Issuing evaluate context command.\n");
|
|
|
|
/* Set up the modified control endpoint 0 */
|
|
xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
|
|
xhci->devs[slot_id]->out_ctx, ep_index);
|
|
in_ctx = xhci->devs[slot_id]->in_ctx;
|
|
ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
|
|
ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
|
|
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
|
|
|
|
/* Set up the input context flags for the command */
|
|
/* FIXME: This won't work if a non-default control endpoint
|
|
* changes max packet sizes.
|
|
*/
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
|
|
ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
|
|
ctrl_ctx->drop_flags = 0;
|
|
|
|
xhci_dbg(xhci, "Slot %d input context\n", slot_id);
|
|
xhci_dbg_ctx(xhci, in_ctx, ep_index);
|
|
xhci_dbg(xhci, "Slot %d output context\n", slot_id);
|
|
xhci_dbg_ctx(xhci, out_ctx, ep_index);
|
|
|
|
ret = xhci_configure_endpoint(xhci, urb->dev, NULL,
|
|
true, false);
|
|
|
|
/* Clean up the input context for later use by bandwidth
|
|
* functions.
|
|
*/
|
|
ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* non-error returns are a promise to giveback() the urb later
|
|
* we drop ownership so next owner (or urb unlink) can get it
|
|
*/
|
|
int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
unsigned int slot_id, ep_index;
|
|
struct urb_priv *urb_priv;
|
|
int size, i;
|
|
|
|
if (!urb || xhci_check_args(hcd, urb->dev, urb->ep,
|
|
true, true, __func__) <= 0)
|
|
return -EINVAL;
|
|
|
|
slot_id = urb->dev->slot_id;
|
|
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
|
|
|
|
if (!HCD_HW_ACCESSIBLE(hcd)) {
|
|
if (!in_interrupt())
|
|
xhci_dbg(xhci, "urb submitted during PCI suspend\n");
|
|
ret = -ESHUTDOWN;
|
|
goto exit;
|
|
}
|
|
|
|
if (usb_endpoint_xfer_isoc(&urb->ep->desc))
|
|
size = urb->number_of_packets;
|
|
else
|
|
size = 1;
|
|
|
|
urb_priv = kzalloc(sizeof(struct urb_priv) +
|
|
size * sizeof(struct xhci_td *), mem_flags);
|
|
if (!urb_priv)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags);
|
|
if (!urb_priv->td[i]) {
|
|
urb_priv->length = i;
|
|
xhci_urb_free_priv(xhci, urb_priv);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
urb_priv->length = size;
|
|
urb_priv->td_cnt = 0;
|
|
urb->hcpriv = urb_priv;
|
|
|
|
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
|
|
/* Check to see if the max packet size for the default control
|
|
* endpoint changed during FS device enumeration
|
|
*/
|
|
if (urb->dev->speed == USB_SPEED_FULL) {
|
|
ret = xhci_check_maxpacket(xhci, slot_id,
|
|
ep_index, urb);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* We have a spinlock and interrupts disabled, so we must pass
|
|
* atomic context to this function, which may allocate memory.
|
|
*/
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
if (xhci->xhc_state & XHCI_STATE_DYING)
|
|
goto dying;
|
|
ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
|
|
slot_id, ep_index);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
} else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) {
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
if (xhci->xhc_state & XHCI_STATE_DYING)
|
|
goto dying;
|
|
if (xhci->devs[slot_id]->eps[ep_index].ep_state &
|
|
EP_GETTING_STREAMS) {
|
|
xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep "
|
|
"is transitioning to using streams.\n");
|
|
ret = -EINVAL;
|
|
} else if (xhci->devs[slot_id]->eps[ep_index].ep_state &
|
|
EP_GETTING_NO_STREAMS) {
|
|
xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep "
|
|
"is transitioning to "
|
|
"not having streams.\n");
|
|
ret = -EINVAL;
|
|
} else {
|
|
ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
|
|
slot_id, ep_index);
|
|
}
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
} else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
if (xhci->xhc_state & XHCI_STATE_DYING)
|
|
goto dying;
|
|
ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
|
|
slot_id, ep_index);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
} else {
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
if (xhci->xhc_state & XHCI_STATE_DYING)
|
|
goto dying;
|
|
ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
|
|
slot_id, ep_index);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
}
|
|
exit:
|
|
return ret;
|
|
dying:
|
|
xhci_urb_free_priv(xhci, urb_priv);
|
|
urb->hcpriv = NULL;
|
|
xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for "
|
|
"non-responsive xHCI host.\n",
|
|
urb->ep->desc.bEndpointAddress, urb);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
/* Get the right ring for the given URB.
|
|
* If the endpoint supports streams, boundary check the URB's stream ID.
|
|
* If the endpoint doesn't support streams, return the singular endpoint ring.
|
|
*/
|
|
static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
|
|
struct urb *urb)
|
|
{
|
|
unsigned int slot_id;
|
|
unsigned int ep_index;
|
|
unsigned int stream_id;
|
|
struct xhci_virt_ep *ep;
|
|
|
|
slot_id = urb->dev->slot_id;
|
|
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
|
|
stream_id = urb->stream_id;
|
|
ep = &xhci->devs[slot_id]->eps[ep_index];
|
|
/* Common case: no streams */
|
|
if (!(ep->ep_state & EP_HAS_STREAMS))
|
|
return ep->ring;
|
|
|
|
if (stream_id == 0) {
|
|
xhci_warn(xhci,
|
|
"WARN: Slot ID %u, ep index %u has streams, "
|
|
"but URB has no stream ID.\n",
|
|
slot_id, ep_index);
|
|
return NULL;
|
|
}
|
|
|
|
if (stream_id < ep->stream_info->num_streams)
|
|
return ep->stream_info->stream_rings[stream_id];
|
|
|
|
xhci_warn(xhci,
|
|
"WARN: Slot ID %u, ep index %u has "
|
|
"stream IDs 1 to %u allocated, "
|
|
"but stream ID %u is requested.\n",
|
|
slot_id, ep_index,
|
|
ep->stream_info->num_streams - 1,
|
|
stream_id);
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Remove the URB's TD from the endpoint ring. This may cause the HC to stop
|
|
* USB transfers, potentially stopping in the middle of a TRB buffer. The HC
|
|
* should pick up where it left off in the TD, unless a Set Transfer Ring
|
|
* Dequeue Pointer is issued.
|
|
*
|
|
* The TRBs that make up the buffers for the canceled URB will be "removed" from
|
|
* the ring. Since the ring is a contiguous structure, they can't be physically
|
|
* removed. Instead, there are two options:
|
|
*
|
|
* 1) If the HC is in the middle of processing the URB to be canceled, we
|
|
* simply move the ring's dequeue pointer past those TRBs using the Set
|
|
* Transfer Ring Dequeue Pointer command. This will be the common case,
|
|
* when drivers timeout on the last submitted URB and attempt to cancel.
|
|
*
|
|
* 2) If the HC is in the middle of a different TD, we turn the TRBs into a
|
|
* series of 1-TRB transfer no-op TDs. (No-ops shouldn't be chained.) The
|
|
* HC will need to invalidate the any TRBs it has cached after the stop
|
|
* endpoint command, as noted in the xHCI 0.95 errata.
|
|
*
|
|
* 3) The TD may have completed by the time the Stop Endpoint Command
|
|
* completes, so software needs to handle that case too.
|
|
*
|
|
* This function should protect against the TD enqueueing code ringing the
|
|
* doorbell while this code is waiting for a Stop Endpoint command to complete.
|
|
* It also needs to account for multiple cancellations on happening at the same
|
|
* time for the same endpoint.
|
|
*
|
|
* Note that this function can be called in any context, or so says
|
|
* usb_hcd_unlink_urb()
|
|
*/
|
|
int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
|
|
{
|
|
unsigned long flags;
|
|
int ret, i;
|
|
u32 temp;
|
|
struct xhci_hcd *xhci;
|
|
struct urb_priv *urb_priv;
|
|
struct xhci_td *td;
|
|
unsigned int ep_index;
|
|
struct xhci_ring *ep_ring;
|
|
struct xhci_virt_ep *ep;
|
|
|
|
xhci = hcd_to_xhci(hcd);
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
/* Make sure the URB hasn't completed or been unlinked already */
|
|
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
|
|
if (ret || !urb->hcpriv)
|
|
goto done;
|
|
temp = xhci_readl(xhci, &xhci->op_regs->status);
|
|
if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
|
|
xhci_dbg(xhci, "HW died, freeing TD.\n");
|
|
urb_priv = urb->hcpriv;
|
|
|
|
usb_hcd_unlink_urb_from_ep(hcd, urb);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN);
|
|
xhci_urb_free_priv(xhci, urb_priv);
|
|
return ret;
|
|
}
|
|
if ((xhci->xhc_state & XHCI_STATE_DYING) ||
|
|
(xhci->xhc_state & XHCI_STATE_HALTED)) {
|
|
xhci_dbg(xhci, "Ep 0x%x: URB %p to be canceled on "
|
|
"non-responsive xHCI host.\n",
|
|
urb->ep->desc.bEndpointAddress, urb);
|
|
/* Let the stop endpoint command watchdog timer (which set this
|
|
* state) finish cleaning up the endpoint TD lists. We must
|
|
* have caught it in the middle of dropping a lock and giving
|
|
* back an URB.
|
|
*/
|
|
goto done;
|
|
}
|
|
|
|
xhci_dbg(xhci, "Cancel URB %p\n", urb);
|
|
xhci_dbg(xhci, "Event ring:\n");
|
|
xhci_debug_ring(xhci, xhci->event_ring);
|
|
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
|
|
ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index];
|
|
ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
|
|
if (!ep_ring) {
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
xhci_dbg(xhci, "Endpoint ring:\n");
|
|
xhci_debug_ring(xhci, ep_ring);
|
|
|
|
urb_priv = urb->hcpriv;
|
|
|
|
for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
|
|
td = urb_priv->td[i];
|
|
list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
|
|
}
|
|
|
|
/* Queue a stop endpoint command, but only if this is
|
|
* the first cancellation to be handled.
|
|
*/
|
|
if (!(ep->ep_state & EP_HALT_PENDING)) {
|
|
ep->ep_state |= EP_HALT_PENDING;
|
|
ep->stop_cmds_pending++;
|
|
ep->stop_cmd_timer.expires = jiffies +
|
|
XHCI_STOP_EP_CMD_TIMEOUT * HZ;
|
|
add_timer(&ep->stop_cmd_timer);
|
|
xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index, 0);
|
|
xhci_ring_cmd_db(xhci);
|
|
}
|
|
done:
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
/* Drop an endpoint from a new bandwidth configuration for this device.
|
|
* Only one call to this function is allowed per endpoint before
|
|
* check_bandwidth() or reset_bandwidth() must be called.
|
|
* A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
|
|
* add the endpoint to the schedule with possibly new parameters denoted by a
|
|
* different endpoint descriptor in usb_host_endpoint.
|
|
* A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
|
|
* not allowed.
|
|
*
|
|
* The USB core will not allow URBs to be queued to an endpoint that is being
|
|
* disabled, so there's no need for mutual exclusion to protect
|
|
* the xhci->devs[slot_id] structure.
|
|
*/
|
|
int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct xhci_hcd *xhci;
|
|
struct xhci_container_ctx *in_ctx, *out_ctx;
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
unsigned int last_ctx;
|
|
unsigned int ep_index;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
u32 drop_flag;
|
|
u32 new_add_flags, new_drop_flags, new_slot_info;
|
|
int ret;
|
|
|
|
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
|
|
if (ret <= 0)
|
|
return ret;
|
|
xhci = hcd_to_xhci(hcd);
|
|
if (xhci->xhc_state & XHCI_STATE_DYING)
|
|
return -ENODEV;
|
|
|
|
xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
|
|
drop_flag = xhci_get_endpoint_flag(&ep->desc);
|
|
if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
|
|
xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
|
|
__func__, drop_flag);
|
|
return 0;
|
|
}
|
|
|
|
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
|
|
out_ctx = xhci->devs[udev->slot_id]->out_ctx;
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
|
|
ep_index = xhci_get_endpoint_index(&ep->desc);
|
|
ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
|
|
/* If the HC already knows the endpoint is disabled,
|
|
* or the HCD has noted it is disabled, ignore this request
|
|
*/
|
|
if (((ep_ctx->ep_info & cpu_to_le32(EP_STATE_MASK)) ==
|
|
cpu_to_le32(EP_STATE_DISABLED)) ||
|
|
le32_to_cpu(ctrl_ctx->drop_flags) &
|
|
xhci_get_endpoint_flag(&ep->desc)) {
|
|
xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
|
|
__func__, ep);
|
|
return 0;
|
|
}
|
|
|
|
ctrl_ctx->drop_flags |= cpu_to_le32(drop_flag);
|
|
new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
|
|
|
|
ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag);
|
|
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
|
|
|
|
last_ctx = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags));
|
|
slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
|
|
/* Update the last valid endpoint context, if we deleted the last one */
|
|
if ((le32_to_cpu(slot_ctx->dev_info) & LAST_CTX_MASK) >
|
|
LAST_CTX(last_ctx)) {
|
|
slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
|
|
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(last_ctx));
|
|
}
|
|
new_slot_info = le32_to_cpu(slot_ctx->dev_info);
|
|
|
|
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
|
|
|
|
xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
|
|
(unsigned int) ep->desc.bEndpointAddress,
|
|
udev->slot_id,
|
|
(unsigned int) new_drop_flags,
|
|
(unsigned int) new_add_flags,
|
|
(unsigned int) new_slot_info);
|
|
return 0;
|
|
}
|
|
|
|
/* Add an endpoint to a new possible bandwidth configuration for this device.
|
|
* Only one call to this function is allowed per endpoint before
|
|
* check_bandwidth() or reset_bandwidth() must be called.
|
|
* A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
|
|
* add the endpoint to the schedule with possibly new parameters denoted by a
|
|
* different endpoint descriptor in usb_host_endpoint.
|
|
* A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
|
|
* not allowed.
|
|
*
|
|
* The USB core will not allow URBs to be queued to an endpoint until the
|
|
* configuration or alt setting is installed in the device, so there's no need
|
|
* for mutual exclusion to protect the xhci->devs[slot_id] structure.
|
|
*/
|
|
int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct xhci_hcd *xhci;
|
|
struct xhci_container_ctx *in_ctx, *out_ctx;
|
|
unsigned int ep_index;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
u32 added_ctxs;
|
|
unsigned int last_ctx;
|
|
u32 new_add_flags, new_drop_flags, new_slot_info;
|
|
struct xhci_virt_device *virt_dev;
|
|
int ret = 0;
|
|
|
|
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
|
|
if (ret <= 0) {
|
|
/* So we won't queue a reset ep command for a root hub */
|
|
ep->hcpriv = NULL;
|
|
return ret;
|
|
}
|
|
xhci = hcd_to_xhci(hcd);
|
|
if (xhci->xhc_state & XHCI_STATE_DYING)
|
|
return -ENODEV;
|
|
|
|
added_ctxs = xhci_get_endpoint_flag(&ep->desc);
|
|
last_ctx = xhci_last_valid_endpoint(added_ctxs);
|
|
if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
|
|
/* FIXME when we have to issue an evaluate endpoint command to
|
|
* deal with ep0 max packet size changing once we get the
|
|
* descriptors
|
|
*/
|
|
xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
|
|
__func__, added_ctxs);
|
|
return 0;
|
|
}
|
|
|
|
virt_dev = xhci->devs[udev->slot_id];
|
|
in_ctx = virt_dev->in_ctx;
|
|
out_ctx = virt_dev->out_ctx;
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
|
|
ep_index = xhci_get_endpoint_index(&ep->desc);
|
|
ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
|
|
|
|
/* If this endpoint is already in use, and the upper layers are trying
|
|
* to add it again without dropping it, reject the addition.
|
|
*/
|
|
if (virt_dev->eps[ep_index].ring &&
|
|
!(le32_to_cpu(ctrl_ctx->drop_flags) &
|
|
xhci_get_endpoint_flag(&ep->desc))) {
|
|
xhci_warn(xhci, "Trying to add endpoint 0x%x "
|
|
"without dropping it.\n",
|
|
(unsigned int) ep->desc.bEndpointAddress);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If the HCD has already noted the endpoint is enabled,
|
|
* ignore this request.
|
|
*/
|
|
if (le32_to_cpu(ctrl_ctx->add_flags) &
|
|
xhci_get_endpoint_flag(&ep->desc)) {
|
|
xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
|
|
__func__, ep);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configuration and alternate setting changes must be done in
|
|
* process context, not interrupt context (or so documenation
|
|
* for usb_set_interface() and usb_set_configuration() claim).
|
|
*/
|
|
if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
|
|
dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
|
|
__func__, ep->desc.bEndpointAddress);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
|
|
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
|
|
|
|
/* If xhci_endpoint_disable() was called for this endpoint, but the
|
|
* xHC hasn't been notified yet through the check_bandwidth() call,
|
|
* this re-adds a new state for the endpoint from the new endpoint
|
|
* descriptors. We must drop and re-add this endpoint, so we leave the
|
|
* drop flags alone.
|
|
*/
|
|
new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
|
|
|
|
slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
|
|
/* Update the last valid endpoint context, if we just added one past */
|
|
if ((le32_to_cpu(slot_ctx->dev_info) & LAST_CTX_MASK) <
|
|
LAST_CTX(last_ctx)) {
|
|
slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
|
|
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(last_ctx));
|
|
}
|
|
new_slot_info = le32_to_cpu(slot_ctx->dev_info);
|
|
|
|
/* Store the usb_device pointer for later use */
|
|
ep->hcpriv = udev;
|
|
|
|
xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
|
|
(unsigned int) ep->desc.bEndpointAddress,
|
|
udev->slot_id,
|
|
(unsigned int) new_drop_flags,
|
|
(unsigned int) new_add_flags,
|
|
(unsigned int) new_slot_info);
|
|
return 0;
|
|
}
|
|
|
|
static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
|
|
{
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
int i;
|
|
|
|
/* When a device's add flag and drop flag are zero, any subsequent
|
|
* configure endpoint command will leave that endpoint's state
|
|
* untouched. Make sure we don't leave any old state in the input
|
|
* endpoint contexts.
|
|
*/
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
|
|
ctrl_ctx->drop_flags = 0;
|
|
ctrl_ctx->add_flags = 0;
|
|
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
|
|
slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
|
|
/* Endpoint 0 is always valid */
|
|
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
|
|
for (i = 1; i < 31; ++i) {
|
|
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
|
|
ep_ctx->ep_info = 0;
|
|
ep_ctx->ep_info2 = 0;
|
|
ep_ctx->deq = 0;
|
|
ep_ctx->tx_info = 0;
|
|
}
|
|
}
|
|
|
|
static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
|
|
struct usb_device *udev, u32 *cmd_status)
|
|
{
|
|
int ret;
|
|
|
|
switch (*cmd_status) {
|
|
case COMP_ENOMEM:
|
|
dev_warn(&udev->dev, "Not enough host controller resources "
|
|
"for new device state.\n");
|
|
ret = -ENOMEM;
|
|
/* FIXME: can we allocate more resources for the HC? */
|
|
break;
|
|
case COMP_BW_ERR:
|
|
dev_warn(&udev->dev, "Not enough bandwidth "
|
|
"for new device state.\n");
|
|
ret = -ENOSPC;
|
|
/* FIXME: can we go back to the old state? */
|
|
break;
|
|
case COMP_TRB_ERR:
|
|
/* the HCD set up something wrong */
|
|
dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
|
|
"add flag = 1, "
|
|
"and endpoint is not disabled.\n");
|
|
ret = -EINVAL;
|
|
break;
|
|
case COMP_DEV_ERR:
|
|
dev_warn(&udev->dev, "ERROR: Incompatible device for endpoint "
|
|
"configure command.\n");
|
|
ret = -ENODEV;
|
|
break;
|
|
case COMP_SUCCESS:
|
|
dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
xhci_err(xhci, "ERROR: unexpected command completion "
|
|
"code 0x%x.\n", *cmd_status);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
|
|
struct usb_device *udev, u32 *cmd_status)
|
|
{
|
|
int ret;
|
|
struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id];
|
|
|
|
switch (*cmd_status) {
|
|
case COMP_EINVAL:
|
|
dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate "
|
|
"context command.\n");
|
|
ret = -EINVAL;
|
|
break;
|
|
case COMP_EBADSLT:
|
|
dev_warn(&udev->dev, "WARN: slot not enabled for"
|
|
"evaluate context command.\n");
|
|
case COMP_CTX_STATE:
|
|
dev_warn(&udev->dev, "WARN: invalid context state for "
|
|
"evaluate context command.\n");
|
|
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
|
|
ret = -EINVAL;
|
|
break;
|
|
case COMP_DEV_ERR:
|
|
dev_warn(&udev->dev, "ERROR: Incompatible device for evaluate "
|
|
"context command.\n");
|
|
ret = -ENODEV;
|
|
break;
|
|
case COMP_MEL_ERR:
|
|
/* Max Exit Latency too large error */
|
|
dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n");
|
|
ret = -EINVAL;
|
|
break;
|
|
case COMP_SUCCESS:
|
|
dev_dbg(&udev->dev, "Successful evaluate context command\n");
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
xhci_err(xhci, "ERROR: unexpected command completion "
|
|
"code 0x%x.\n", *cmd_status);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
|
|
struct xhci_container_ctx *in_ctx)
|
|
{
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
u32 valid_add_flags;
|
|
u32 valid_drop_flags;
|
|
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
|
|
/* Ignore the slot flag (bit 0), and the default control endpoint flag
|
|
* (bit 1). The default control endpoint is added during the Address
|
|
* Device command and is never removed until the slot is disabled.
|
|
*/
|
|
valid_add_flags = ctrl_ctx->add_flags >> 2;
|
|
valid_drop_flags = ctrl_ctx->drop_flags >> 2;
|
|
|
|
/* Use hweight32 to count the number of ones in the add flags, or
|
|
* number of endpoints added. Don't count endpoints that are changed
|
|
* (both added and dropped).
|
|
*/
|
|
return hweight32(valid_add_flags) -
|
|
hweight32(valid_add_flags & valid_drop_flags);
|
|
}
|
|
|
|
static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
|
|
struct xhci_container_ctx *in_ctx)
|
|
{
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
u32 valid_add_flags;
|
|
u32 valid_drop_flags;
|
|
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
|
|
valid_add_flags = ctrl_ctx->add_flags >> 2;
|
|
valid_drop_flags = ctrl_ctx->drop_flags >> 2;
|
|
|
|
return hweight32(valid_drop_flags) -
|
|
hweight32(valid_add_flags & valid_drop_flags);
|
|
}
|
|
|
|
/*
|
|
* We need to reserve the new number of endpoints before the configure endpoint
|
|
* command completes. We can't subtract the dropped endpoints from the number
|
|
* of active endpoints until the command completes because we can oversubscribe
|
|
* the host in this case:
|
|
*
|
|
* - the first configure endpoint command drops more endpoints than it adds
|
|
* - a second configure endpoint command that adds more endpoints is queued
|
|
* - the first configure endpoint command fails, so the config is unchanged
|
|
* - the second command may succeed, even though there isn't enough resources
|
|
*
|
|
* Must be called with xhci->lock held.
|
|
*/
|
|
static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
|
|
struct xhci_container_ctx *in_ctx)
|
|
{
|
|
u32 added_eps;
|
|
|
|
added_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
|
|
if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) {
|
|
xhci_dbg(xhci, "Not enough ep ctxs: "
|
|
"%u active, need to add %u, limit is %u.\n",
|
|
xhci->num_active_eps, added_eps,
|
|
xhci->limit_active_eps);
|
|
return -ENOMEM;
|
|
}
|
|
xhci->num_active_eps += added_eps;
|
|
xhci_dbg(xhci, "Adding %u ep ctxs, %u now active.\n", added_eps,
|
|
xhci->num_active_eps);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The configure endpoint was failed by the xHC for some other reason, so we
|
|
* need to revert the resources that failed configuration would have used.
|
|
*
|
|
* Must be called with xhci->lock held.
|
|
*/
|
|
static void xhci_free_host_resources(struct xhci_hcd *xhci,
|
|
struct xhci_container_ctx *in_ctx)
|
|
{
|
|
u32 num_failed_eps;
|
|
|
|
num_failed_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
|
|
xhci->num_active_eps -= num_failed_eps;
|
|
xhci_dbg(xhci, "Removing %u failed ep ctxs, %u now active.\n",
|
|
num_failed_eps,
|
|
xhci->num_active_eps);
|
|
}
|
|
|
|
/*
|
|
* Now that the command has completed, clean up the active endpoint count by
|
|
* subtracting out the endpoints that were dropped (but not changed).
|
|
*
|
|
* Must be called with xhci->lock held.
|
|
*/
|
|
static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
|
|
struct xhci_container_ctx *in_ctx)
|
|
{
|
|
u32 num_dropped_eps;
|
|
|
|
num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, in_ctx);
|
|
xhci->num_active_eps -= num_dropped_eps;
|
|
if (num_dropped_eps)
|
|
xhci_dbg(xhci, "Removing %u dropped ep ctxs, %u now active.\n",
|
|
num_dropped_eps,
|
|
xhci->num_active_eps);
|
|
}
|
|
|
|
/* Issue a configure endpoint command or evaluate context command
|
|
* and wait for it to finish.
|
|
*/
|
|
static int xhci_configure_endpoint(struct xhci_hcd *xhci,
|
|
struct usb_device *udev,
|
|
struct xhci_command *command,
|
|
bool ctx_change, bool must_succeed)
|
|
{
|
|
int ret;
|
|
int timeleft;
|
|
unsigned long flags;
|
|
struct xhci_container_ctx *in_ctx;
|
|
struct completion *cmd_completion;
|
|
u32 *cmd_status;
|
|
struct xhci_virt_device *virt_dev;
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
virt_dev = xhci->devs[udev->slot_id];
|
|
if (command) {
|
|
in_ctx = command->in_ctx;
|
|
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
|
|
xhci_reserve_host_resources(xhci, in_ctx)) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_warn(xhci, "Not enough host resources, "
|
|
"active endpoint contexts = %u\n",
|
|
xhci->num_active_eps);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
cmd_completion = command->completion;
|
|
cmd_status = &command->status;
|
|
command->command_trb = xhci->cmd_ring->enqueue;
|
|
|
|
/* Enqueue pointer can be left pointing to the link TRB,
|
|
* we must handle that
|
|
*/
|
|
if (TRB_TYPE_LINK_LE32(command->command_trb->link.control))
|
|
command->command_trb =
|
|
xhci->cmd_ring->enq_seg->next->trbs;
|
|
|
|
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
|
|
} else {
|
|
in_ctx = virt_dev->in_ctx;
|
|
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
|
|
xhci_reserve_host_resources(xhci, in_ctx)) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_warn(xhci, "Not enough host resources, "
|
|
"active endpoint contexts = %u\n",
|
|
xhci->num_active_eps);
|
|
return -ENOMEM;
|
|
}
|
|
cmd_completion = &virt_dev->cmd_completion;
|
|
cmd_status = &virt_dev->cmd_status;
|
|
}
|
|
init_completion(cmd_completion);
|
|
|
|
if (!ctx_change)
|
|
ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
|
|
udev->slot_id, must_succeed);
|
|
else
|
|
ret = xhci_queue_evaluate_context(xhci, in_ctx->dma,
|
|
udev->slot_id);
|
|
if (ret < 0) {
|
|
if (command)
|
|
list_del(&command->cmd_list);
|
|
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
|
|
xhci_free_host_resources(xhci, in_ctx);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
|
|
return -ENOMEM;
|
|
}
|
|
xhci_ring_cmd_db(xhci);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
/* Wait for the configure endpoint command to complete */
|
|
timeleft = wait_for_completion_interruptible_timeout(
|
|
cmd_completion,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
if (timeleft <= 0) {
|
|
xhci_warn(xhci, "%s while waiting for %s command\n",
|
|
timeleft == 0 ? "Timeout" : "Signal",
|
|
ctx_change == 0 ?
|
|
"configure endpoint" :
|
|
"evaluate context");
|
|
/* FIXME cancel the configure endpoint command */
|
|
return -ETIME;
|
|
}
|
|
|
|
if (!ctx_change)
|
|
ret = xhci_configure_endpoint_result(xhci, udev, cmd_status);
|
|
else
|
|
ret = xhci_evaluate_context_result(xhci, udev, cmd_status);
|
|
|
|
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
/* If the command failed, remove the reserved resources.
|
|
* Otherwise, clean up the estimate to include dropped eps.
|
|
*/
|
|
if (ret)
|
|
xhci_free_host_resources(xhci, in_ctx);
|
|
else
|
|
xhci_finish_resource_reservation(xhci, in_ctx);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Called after one or more calls to xhci_add_endpoint() or
|
|
* xhci_drop_endpoint(). If this call fails, the USB core is expected
|
|
* to call xhci_reset_bandwidth().
|
|
*
|
|
* Since we are in the middle of changing either configuration or
|
|
* installing a new alt setting, the USB core won't allow URBs to be
|
|
* enqueued for any endpoint on the old config or interface. Nothing
|
|
* else should be touching the xhci->devs[slot_id] structure, so we
|
|
* don't need to take the xhci->lock for manipulating that.
|
|
*/
|
|
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
|
|
{
|
|
int i;
|
|
int ret = 0;
|
|
struct xhci_hcd *xhci;
|
|
struct xhci_virt_device *virt_dev;
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
|
|
ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
|
|
if (ret <= 0)
|
|
return ret;
|
|
xhci = hcd_to_xhci(hcd);
|
|
if (xhci->xhc_state & XHCI_STATE_DYING)
|
|
return -ENODEV;
|
|
|
|
xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
|
|
virt_dev = xhci->devs[udev->slot_id];
|
|
|
|
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
|
|
ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
|
|
ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
|
|
ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
|
|
xhci_dbg(xhci, "New Input Control Context:\n");
|
|
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
|
|
xhci_dbg_ctx(xhci, virt_dev->in_ctx,
|
|
LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info)));
|
|
|
|
ret = xhci_configure_endpoint(xhci, udev, NULL,
|
|
false, false);
|
|
if (ret) {
|
|
/* Callee should call reset_bandwidth() */
|
|
return ret;
|
|
}
|
|
|
|
xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
|
|
xhci_dbg_ctx(xhci, virt_dev->out_ctx,
|
|
LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info)));
|
|
|
|
/* Free any rings that were dropped, but not changed. */
|
|
for (i = 1; i < 31; ++i) {
|
|
if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
|
|
!(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
|
|
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
|
|
}
|
|
xhci_zero_in_ctx(xhci, virt_dev);
|
|
/*
|
|
* Install any rings for completely new endpoints or changed endpoints,
|
|
* and free or cache any old rings from changed endpoints.
|
|
*/
|
|
for (i = 1; i < 31; ++i) {
|
|
if (!virt_dev->eps[i].new_ring)
|
|
continue;
|
|
/* Only cache or free the old ring if it exists.
|
|
* It may not if this is the first add of an endpoint.
|
|
*/
|
|
if (virt_dev->eps[i].ring) {
|
|
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
|
|
}
|
|
virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
|
|
virt_dev->eps[i].new_ring = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
|
|
{
|
|
struct xhci_hcd *xhci;
|
|
struct xhci_virt_device *virt_dev;
|
|
int i, ret;
|
|
|
|
ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
|
|
if (ret <= 0)
|
|
return;
|
|
xhci = hcd_to_xhci(hcd);
|
|
|
|
xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
|
|
virt_dev = xhci->devs[udev->slot_id];
|
|
/* Free any rings allocated for added endpoints */
|
|
for (i = 0; i < 31; ++i) {
|
|
if (virt_dev->eps[i].new_ring) {
|
|
xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
|
|
virt_dev->eps[i].new_ring = NULL;
|
|
}
|
|
}
|
|
xhci_zero_in_ctx(xhci, virt_dev);
|
|
}
|
|
|
|
static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
|
|
struct xhci_container_ctx *in_ctx,
|
|
struct xhci_container_ctx *out_ctx,
|
|
u32 add_flags, u32 drop_flags)
|
|
{
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
|
|
ctrl_ctx->add_flags = cpu_to_le32(add_flags);
|
|
ctrl_ctx->drop_flags = cpu_to_le32(drop_flags);
|
|
xhci_slot_copy(xhci, in_ctx, out_ctx);
|
|
ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
|
|
|
|
xhci_dbg(xhci, "Input Context:\n");
|
|
xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags));
|
|
}
|
|
|
|
static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
|
|
unsigned int slot_id, unsigned int ep_index,
|
|
struct xhci_dequeue_state *deq_state)
|
|
{
|
|
struct xhci_container_ctx *in_ctx;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
u32 added_ctxs;
|
|
dma_addr_t addr;
|
|
|
|
xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
|
|
xhci->devs[slot_id]->out_ctx, ep_index);
|
|
in_ctx = xhci->devs[slot_id]->in_ctx;
|
|
ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
|
|
addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
|
|
deq_state->new_deq_ptr);
|
|
if (addr == 0) {
|
|
xhci_warn(xhci, "WARN Cannot submit config ep after "
|
|
"reset ep command\n");
|
|
xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n",
|
|
deq_state->new_deq_seg,
|
|
deq_state->new_deq_ptr);
|
|
return;
|
|
}
|
|
ep_ctx->deq = cpu_to_le64(addr | deq_state->new_cycle_state);
|
|
|
|
added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
|
|
xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx,
|
|
xhci->devs[slot_id]->out_ctx, added_ctxs, added_ctxs);
|
|
}
|
|
|
|
void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
|
|
struct usb_device *udev, unsigned int ep_index)
|
|
{
|
|
struct xhci_dequeue_state deq_state;
|
|
struct xhci_virt_ep *ep;
|
|
|
|
xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
|
|
ep = &xhci->devs[udev->slot_id]->eps[ep_index];
|
|
/* We need to move the HW's dequeue pointer past this TD,
|
|
* or it will attempt to resend it on the next doorbell ring.
|
|
*/
|
|
xhci_find_new_dequeue_state(xhci, udev->slot_id,
|
|
ep_index, ep->stopped_stream, ep->stopped_td,
|
|
&deq_state);
|
|
|
|
/* HW with the reset endpoint quirk will use the saved dequeue state to
|
|
* issue a configure endpoint command later.
|
|
*/
|
|
if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
|
|
xhci_dbg(xhci, "Queueing new dequeue state\n");
|
|
xhci_queue_new_dequeue_state(xhci, udev->slot_id,
|
|
ep_index, ep->stopped_stream, &deq_state);
|
|
} else {
|
|
/* Better hope no one uses the input context between now and the
|
|
* reset endpoint completion!
|
|
* XXX: No idea how this hardware will react when stream rings
|
|
* are enabled.
|
|
*/
|
|
xhci_dbg(xhci, "Setting up input context for "
|
|
"configure endpoint command\n");
|
|
xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id,
|
|
ep_index, &deq_state);
|
|
}
|
|
}
|
|
|
|
/* Deal with stalled endpoints. The core should have sent the control message
|
|
* to clear the halt condition. However, we need to make the xHCI hardware
|
|
* reset its sequence number, since a device will expect a sequence number of
|
|
* zero after the halt condition is cleared.
|
|
* Context: in_interrupt
|
|
*/
|
|
void xhci_endpoint_reset(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
struct xhci_hcd *xhci;
|
|
struct usb_device *udev;
|
|
unsigned int ep_index;
|
|
unsigned long flags;
|
|
int ret;
|
|
struct xhci_virt_ep *virt_ep;
|
|
|
|
xhci = hcd_to_xhci(hcd);
|
|
udev = (struct usb_device *) ep->hcpriv;
|
|
/* Called with a root hub endpoint (or an endpoint that wasn't added
|
|
* with xhci_add_endpoint()
|
|
*/
|
|
if (!ep->hcpriv)
|
|
return;
|
|
ep_index = xhci_get_endpoint_index(&ep->desc);
|
|
virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
|
|
if (!virt_ep->stopped_td) {
|
|
xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
|
|
ep->desc.bEndpointAddress);
|
|
return;
|
|
}
|
|
if (usb_endpoint_xfer_control(&ep->desc)) {
|
|
xhci_dbg(xhci, "Control endpoint stall already handled.\n");
|
|
return;
|
|
}
|
|
|
|
xhci_dbg(xhci, "Queueing reset endpoint command\n");
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
|
|
/*
|
|
* Can't change the ring dequeue pointer until it's transitioned to the
|
|
* stopped state, which is only upon a successful reset endpoint
|
|
* command. Better hope that last command worked!
|
|
*/
|
|
if (!ret) {
|
|
xhci_cleanup_stalled_ring(xhci, udev, ep_index);
|
|
kfree(virt_ep->stopped_td);
|
|
xhci_ring_cmd_db(xhci);
|
|
}
|
|
virt_ep->stopped_td = NULL;
|
|
virt_ep->stopped_trb = NULL;
|
|
virt_ep->stopped_stream = 0;
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
if (ret)
|
|
xhci_warn(xhci, "FIXME allocate a new ring segment\n");
|
|
}
|
|
|
|
static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
|
|
struct usb_device *udev, struct usb_host_endpoint *ep,
|
|
unsigned int slot_id)
|
|
{
|
|
int ret;
|
|
unsigned int ep_index;
|
|
unsigned int ep_state;
|
|
|
|
if (!ep)
|
|
return -EINVAL;
|
|
ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__);
|
|
if (ret <= 0)
|
|
return -EINVAL;
|
|
if (ep->ss_ep_comp.bmAttributes == 0) {
|
|
xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
|
|
" descriptor for ep 0x%x does not support streams\n",
|
|
ep->desc.bEndpointAddress);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep_index = xhci_get_endpoint_index(&ep->desc);
|
|
ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
|
|
if (ep_state & EP_HAS_STREAMS ||
|
|
ep_state & EP_GETTING_STREAMS) {
|
|
xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x "
|
|
"already has streams set up.\n",
|
|
ep->desc.bEndpointAddress);
|
|
xhci_warn(xhci, "Send email to xHCI maintainer and ask for "
|
|
"dynamic stream context array reallocation.\n");
|
|
return -EINVAL;
|
|
}
|
|
if (!list_empty(&xhci->devs[slot_id]->eps[ep_index].ring->td_list)) {
|
|
xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk "
|
|
"endpoint 0x%x; URBs are pending.\n",
|
|
ep->desc.bEndpointAddress);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void xhci_calculate_streams_entries(struct xhci_hcd *xhci,
|
|
unsigned int *num_streams, unsigned int *num_stream_ctxs)
|
|
{
|
|
unsigned int max_streams;
|
|
|
|
/* The stream context array size must be a power of two */
|
|
*num_stream_ctxs = roundup_pow_of_two(*num_streams);
|
|
/*
|
|
* Find out how many primary stream array entries the host controller
|
|
* supports. Later we may use secondary stream arrays (similar to 2nd
|
|
* level page entries), but that's an optional feature for xHCI host
|
|
* controllers. xHCs must support at least 4 stream IDs.
|
|
*/
|
|
max_streams = HCC_MAX_PSA(xhci->hcc_params);
|
|
if (*num_stream_ctxs > max_streams) {
|
|
xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",
|
|
max_streams);
|
|
*num_stream_ctxs = max_streams;
|
|
*num_streams = max_streams;
|
|
}
|
|
}
|
|
|
|
/* Returns an error code if one of the endpoint already has streams.
|
|
* This does not change any data structures, it only checks and gathers
|
|
* information.
|
|
*/
|
|
static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci,
|
|
struct usb_device *udev,
|
|
struct usb_host_endpoint **eps, unsigned int num_eps,
|
|
unsigned int *num_streams, u32 *changed_ep_bitmask)
|
|
{
|
|
unsigned int max_streams;
|
|
unsigned int endpoint_flag;
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < num_eps; i++) {
|
|
ret = xhci_check_streams_endpoint(xhci, udev,
|
|
eps[i], udev->slot_id);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
max_streams = USB_SS_MAX_STREAMS(
|
|
eps[i]->ss_ep_comp.bmAttributes);
|
|
if (max_streams < (*num_streams - 1)) {
|
|
xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
|
|
eps[i]->desc.bEndpointAddress,
|
|
max_streams);
|
|
*num_streams = max_streams+1;
|
|
}
|
|
|
|
endpoint_flag = xhci_get_endpoint_flag(&eps[i]->desc);
|
|
if (*changed_ep_bitmask & endpoint_flag)
|
|
return -EINVAL;
|
|
*changed_ep_bitmask |= endpoint_flag;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci,
|
|
struct usb_device *udev,
|
|
struct usb_host_endpoint **eps, unsigned int num_eps)
|
|
{
|
|
u32 changed_ep_bitmask = 0;
|
|
unsigned int slot_id;
|
|
unsigned int ep_index;
|
|
unsigned int ep_state;
|
|
int i;
|
|
|
|
slot_id = udev->slot_id;
|
|
if (!xhci->devs[slot_id])
|
|
return 0;
|
|
|
|
for (i = 0; i < num_eps; i++) {
|
|
ep_index = xhci_get_endpoint_index(&eps[i]->desc);
|
|
ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
|
|
/* Are streams already being freed for the endpoint? */
|
|
if (ep_state & EP_GETTING_NO_STREAMS) {
|
|
xhci_warn(xhci, "WARN Can't disable streams for "
|
|
"endpoint 0x%x\n, "
|
|
"streams are being disabled already.",
|
|
eps[i]->desc.bEndpointAddress);
|
|
return 0;
|
|
}
|
|
/* Are there actually any streams to free? */
|
|
if (!(ep_state & EP_HAS_STREAMS) &&
|
|
!(ep_state & EP_GETTING_STREAMS)) {
|
|
xhci_warn(xhci, "WARN Can't disable streams for "
|
|
"endpoint 0x%x\n, "
|
|
"streams are already disabled!",
|
|
eps[i]->desc.bEndpointAddress);
|
|
xhci_warn(xhci, "WARN xhci_free_streams() called "
|
|
"with non-streams endpoint\n");
|
|
return 0;
|
|
}
|
|
changed_ep_bitmask |= xhci_get_endpoint_flag(&eps[i]->desc);
|
|
}
|
|
return changed_ep_bitmask;
|
|
}
|
|
|
|
/*
|
|
* The USB device drivers use this function (though the HCD interface in USB
|
|
* core) to prepare a set of bulk endpoints to use streams. Streams are used to
|
|
* coordinate mass storage command queueing across multiple endpoints (basically
|
|
* a stream ID == a task ID).
|
|
*
|
|
* Setting up streams involves allocating the same size stream context array
|
|
* for each endpoint and issuing a configure endpoint command for all endpoints.
|
|
*
|
|
* Don't allow the call to succeed if one endpoint only supports one stream
|
|
* (which means it doesn't support streams at all).
|
|
*
|
|
* Drivers may get less stream IDs than they asked for, if the host controller
|
|
* hardware or endpoints claim they can't support the number of requested
|
|
* stream IDs.
|
|
*/
|
|
int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint **eps, unsigned int num_eps,
|
|
unsigned int num_streams, gfp_t mem_flags)
|
|
{
|
|
int i, ret;
|
|
struct xhci_hcd *xhci;
|
|
struct xhci_virt_device *vdev;
|
|
struct xhci_command *config_cmd;
|
|
unsigned int ep_index;
|
|
unsigned int num_stream_ctxs;
|
|
unsigned long flags;
|
|
u32 changed_ep_bitmask = 0;
|
|
|
|
if (!eps)
|
|
return -EINVAL;
|
|
|
|
/* Add one to the number of streams requested to account for
|
|
* stream 0 that is reserved for xHCI usage.
|
|
*/
|
|
num_streams += 1;
|
|
xhci = hcd_to_xhci(hcd);
|
|
xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
|
|
num_streams);
|
|
|
|
config_cmd = xhci_alloc_command(xhci, true, true, mem_flags);
|
|
if (!config_cmd) {
|
|
xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Check to make sure all endpoints are not already configured for
|
|
* streams. While we're at it, find the maximum number of streams that
|
|
* all the endpoints will support and check for duplicate endpoints.
|
|
*/
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
ret = xhci_calculate_streams_and_bitmask(xhci, udev, eps,
|
|
num_eps, &num_streams, &changed_ep_bitmask);
|
|
if (ret < 0) {
|
|
xhci_free_command(xhci, config_cmd);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return ret;
|
|
}
|
|
if (num_streams <= 1) {
|
|
xhci_warn(xhci, "WARN: endpoints can't handle "
|
|
"more than one stream.\n");
|
|
xhci_free_command(xhci, config_cmd);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
vdev = xhci->devs[udev->slot_id];
|
|
/* Mark each endpoint as being in transition, so
|
|
* xhci_urb_enqueue() will reject all URBs.
|
|
*/
|
|
for (i = 0; i < num_eps; i++) {
|
|
ep_index = xhci_get_endpoint_index(&eps[i]->desc);
|
|
vdev->eps[ep_index].ep_state |= EP_GETTING_STREAMS;
|
|
}
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
/* Setup internal data structures and allocate HW data structures for
|
|
* streams (but don't install the HW structures in the input context
|
|
* until we're sure all memory allocation succeeded).
|
|
*/
|
|
xhci_calculate_streams_entries(xhci, &num_streams, &num_stream_ctxs);
|
|
xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",
|
|
num_stream_ctxs, num_streams);
|
|
|
|
for (i = 0; i < num_eps; i++) {
|
|
ep_index = xhci_get_endpoint_index(&eps[i]->desc);
|
|
vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci,
|
|
num_stream_ctxs,
|
|
num_streams, mem_flags);
|
|
if (!vdev->eps[ep_index].stream_info)
|
|
goto cleanup;
|
|
/* Set maxPstreams in endpoint context and update deq ptr to
|
|
* point to stream context array. FIXME
|
|
*/
|
|
}
|
|
|
|
/* Set up the input context for a configure endpoint command. */
|
|
for (i = 0; i < num_eps; i++) {
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
|
|
ep_index = xhci_get_endpoint_index(&eps[i]->desc);
|
|
ep_ctx = xhci_get_ep_ctx(xhci, config_cmd->in_ctx, ep_index);
|
|
|
|
xhci_endpoint_copy(xhci, config_cmd->in_ctx,
|
|
vdev->out_ctx, ep_index);
|
|
xhci_setup_streams_ep_input_ctx(xhci, ep_ctx,
|
|
vdev->eps[ep_index].stream_info);
|
|
}
|
|
/* Tell the HW to drop its old copy of the endpoint context info
|
|
* and add the updated copy from the input context.
|
|
*/
|
|
xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx,
|
|
vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask);
|
|
|
|
/* Issue and wait for the configure endpoint command */
|
|
ret = xhci_configure_endpoint(xhci, udev, config_cmd,
|
|
false, false);
|
|
|
|
/* xHC rejected the configure endpoint command for some reason, so we
|
|
* leave the old ring intact and free our internal streams data
|
|
* structure.
|
|
*/
|
|
if (ret < 0)
|
|
goto cleanup;
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
for (i = 0; i < num_eps; i++) {
|
|
ep_index = xhci_get_endpoint_index(&eps[i]->desc);
|
|
vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
|
|
xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
|
|
udev->slot_id, ep_index);
|
|
vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS;
|
|
}
|
|
xhci_free_command(xhci, config_cmd);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
/* Subtract 1 for stream 0, which drivers can't use */
|
|
return num_streams - 1;
|
|
|
|
cleanup:
|
|
/* If it didn't work, free the streams! */
|
|
for (i = 0; i < num_eps; i++) {
|
|
ep_index = xhci_get_endpoint_index(&eps[i]->desc);
|
|
xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
|
|
vdev->eps[ep_index].stream_info = NULL;
|
|
/* FIXME Unset maxPstreams in endpoint context and
|
|
* update deq ptr to point to normal string ring.
|
|
*/
|
|
vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
|
|
vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
|
|
xhci_endpoint_zero(xhci, vdev, eps[i]);
|
|
}
|
|
xhci_free_command(xhci, config_cmd);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Transition the endpoint from using streams to being a "normal" endpoint
|
|
* without streams.
|
|
*
|
|
* Modify the endpoint context state, submit a configure endpoint command,
|
|
* and free all endpoint rings for streams if that completes successfully.
|
|
*/
|
|
int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint **eps, unsigned int num_eps,
|
|
gfp_t mem_flags)
|
|
{
|
|
int i, ret;
|
|
struct xhci_hcd *xhci;
|
|
struct xhci_virt_device *vdev;
|
|
struct xhci_command *command;
|
|
unsigned int ep_index;
|
|
unsigned long flags;
|
|
u32 changed_ep_bitmask;
|
|
|
|
xhci = hcd_to_xhci(hcd);
|
|
vdev = xhci->devs[udev->slot_id];
|
|
|
|
/* Set up a configure endpoint command to remove the streams rings */
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
changed_ep_bitmask = xhci_calculate_no_streams_bitmask(xhci,
|
|
udev, eps, num_eps);
|
|
if (changed_ep_bitmask == 0) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Use the xhci_command structure from the first endpoint. We may have
|
|
* allocated too many, but the driver may call xhci_free_streams() for
|
|
* each endpoint it grouped into one call to xhci_alloc_streams().
|
|
*/
|
|
ep_index = xhci_get_endpoint_index(&eps[0]->desc);
|
|
command = vdev->eps[ep_index].stream_info->free_streams_command;
|
|
for (i = 0; i < num_eps; i++) {
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
|
|
ep_index = xhci_get_endpoint_index(&eps[i]->desc);
|
|
ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
|
|
xhci->devs[udev->slot_id]->eps[ep_index].ep_state |=
|
|
EP_GETTING_NO_STREAMS;
|
|
|
|
xhci_endpoint_copy(xhci, command->in_ctx,
|
|
vdev->out_ctx, ep_index);
|
|
xhci_setup_no_streams_ep_input_ctx(xhci, ep_ctx,
|
|
&vdev->eps[ep_index]);
|
|
}
|
|
xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
|
|
vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
/* Issue and wait for the configure endpoint command,
|
|
* which must succeed.
|
|
*/
|
|
ret = xhci_configure_endpoint(xhci, udev, command,
|
|
false, true);
|
|
|
|
/* xHC rejected the configure endpoint command for some reason, so we
|
|
* leave the streams rings intact.
|
|
*/
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
for (i = 0; i < num_eps; i++) {
|
|
ep_index = xhci_get_endpoint_index(&eps[i]->desc);
|
|
xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
|
|
vdev->eps[ep_index].stream_info = NULL;
|
|
/* FIXME Unset maxPstreams in endpoint context and
|
|
* update deq ptr to point to normal string ring.
|
|
*/
|
|
vdev->eps[ep_index].ep_state &= ~EP_GETTING_NO_STREAMS;
|
|
vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
|
|
}
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Deletes endpoint resources for endpoints that were active before a Reset
|
|
* Device command, or a Disable Slot command. The Reset Device command leaves
|
|
* the control endpoint intact, whereas the Disable Slot command deletes it.
|
|
*
|
|
* Must be called with xhci->lock held.
|
|
*/
|
|
void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
|
|
struct xhci_virt_device *virt_dev, bool drop_control_ep)
|
|
{
|
|
int i;
|
|
unsigned int num_dropped_eps = 0;
|
|
unsigned int drop_flags = 0;
|
|
|
|
for (i = (drop_control_ep ? 0 : 1); i < 31; i++) {
|
|
if (virt_dev->eps[i].ring) {
|
|
drop_flags |= 1 << i;
|
|
num_dropped_eps++;
|
|
}
|
|
}
|
|
xhci->num_active_eps -= num_dropped_eps;
|
|
if (num_dropped_eps)
|
|
xhci_dbg(xhci, "Dropped %u ep ctxs, flags = 0x%x, "
|
|
"%u now active.\n",
|
|
num_dropped_eps, drop_flags,
|
|
xhci->num_active_eps);
|
|
}
|
|
|
|
/*
|
|
* This submits a Reset Device Command, which will set the device state to 0,
|
|
* set the device address to 0, and disable all the endpoints except the default
|
|
* control endpoint. The USB core should come back and call
|
|
* xhci_address_device(), and then re-set up the configuration. If this is
|
|
* called because of a usb_reset_and_verify_device(), then the old alternate
|
|
* settings will be re-installed through the normal bandwidth allocation
|
|
* functions.
|
|
*
|
|
* Wait for the Reset Device command to finish. Remove all structures
|
|
* associated with the endpoints that were disabled. Clear the input device
|
|
* structure? Cache the rings? Reset the control endpoint 0 max packet size?
|
|
*
|
|
* If the virt_dev to be reset does not exist or does not match the udev,
|
|
* it means the device is lost, possibly due to the xHC restore error and
|
|
* re-initialization during S3/S4. In this case, call xhci_alloc_dev() to
|
|
* re-allocate the device.
|
|
*/
|
|
int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
|
|
{
|
|
int ret, i;
|
|
unsigned long flags;
|
|
struct xhci_hcd *xhci;
|
|
unsigned int slot_id;
|
|
struct xhci_virt_device *virt_dev;
|
|
struct xhci_command *reset_device_cmd;
|
|
int timeleft;
|
|
int last_freed_endpoint;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
|
|
ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
|
|
if (ret <= 0)
|
|
return ret;
|
|
xhci = hcd_to_xhci(hcd);
|
|
slot_id = udev->slot_id;
|
|
virt_dev = xhci->devs[slot_id];
|
|
if (!virt_dev) {
|
|
xhci_dbg(xhci, "The device to be reset with slot ID %u does "
|
|
"not exist. Re-allocate the device\n", slot_id);
|
|
ret = xhci_alloc_dev(hcd, udev);
|
|
if (ret == 1)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (virt_dev->udev != udev) {
|
|
/* If the virt_dev and the udev does not match, this virt_dev
|
|
* may belong to another udev.
|
|
* Re-allocate the device.
|
|
*/
|
|
xhci_dbg(xhci, "The device to be reset with slot ID %u does "
|
|
"not match the udev. Re-allocate the device\n",
|
|
slot_id);
|
|
ret = xhci_alloc_dev(hcd, udev);
|
|
if (ret == 1)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* If device is not setup, there is no point in resetting it */
|
|
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
|
|
if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
|
|
SLOT_STATE_DISABLED)
|
|
return 0;
|
|
|
|
xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
|
|
/* Allocate the command structure that holds the struct completion.
|
|
* Assume we're in process context, since the normal device reset
|
|
* process has to wait for the device anyway. Storage devices are
|
|
* reset as part of error handling, so use GFP_NOIO instead of
|
|
* GFP_KERNEL.
|
|
*/
|
|
reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
|
|
if (!reset_device_cmd) {
|
|
xhci_dbg(xhci, "Couldn't allocate command structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Attempt to submit the Reset Device command to the command ring */
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
|
|
|
|
/* Enqueue pointer can be left pointing to the link TRB,
|
|
* we must handle that
|
|
*/
|
|
if (TRB_TYPE_LINK_LE32(reset_device_cmd->command_trb->link.control))
|
|
reset_device_cmd->command_trb =
|
|
xhci->cmd_ring->enq_seg->next->trbs;
|
|
|
|
list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
|
|
ret = xhci_queue_reset_device(xhci, slot_id);
|
|
if (ret) {
|
|
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
|
|
list_del(&reset_device_cmd->cmd_list);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
goto command_cleanup;
|
|
}
|
|
xhci_ring_cmd_db(xhci);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
/* Wait for the Reset Device command to finish */
|
|
timeleft = wait_for_completion_interruptible_timeout(
|
|
reset_device_cmd->completion,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
if (timeleft <= 0) {
|
|
xhci_warn(xhci, "%s while waiting for reset device command\n",
|
|
timeleft == 0 ? "Timeout" : "Signal");
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
/* The timeout might have raced with the event ring handler, so
|
|
* only delete from the list if the item isn't poisoned.
|
|
*/
|
|
if (reset_device_cmd->cmd_list.next != LIST_POISON1)
|
|
list_del(&reset_device_cmd->cmd_list);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
ret = -ETIME;
|
|
goto command_cleanup;
|
|
}
|
|
|
|
/* The Reset Device command can't fail, according to the 0.95/0.96 spec,
|
|
* unless we tried to reset a slot ID that wasn't enabled,
|
|
* or the device wasn't in the addressed or configured state.
|
|
*/
|
|
ret = reset_device_cmd->status;
|
|
switch (ret) {
|
|
case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */
|
|
case COMP_CTX_STATE: /* 0.96 completion code for same thing */
|
|
xhci_info(xhci, "Can't reset device (slot ID %u) in %s state\n",
|
|
slot_id,
|
|
xhci_get_slot_state(xhci, virt_dev->out_ctx));
|
|
xhci_info(xhci, "Not freeing device rings.\n");
|
|
/* Don't treat this as an error. May change my mind later. */
|
|
ret = 0;
|
|
goto command_cleanup;
|
|
case COMP_SUCCESS:
|
|
xhci_dbg(xhci, "Successful reset device command.\n");
|
|
break;
|
|
default:
|
|
if (xhci_is_vendor_info_code(xhci, ret))
|
|
break;
|
|
xhci_warn(xhci, "Unknown completion code %u for "
|
|
"reset device command.\n", ret);
|
|
ret = -EINVAL;
|
|
goto command_cleanup;
|
|
}
|
|
|
|
/* Free up host controller endpoint resources */
|
|
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
/* Don't delete the default control endpoint resources */
|
|
xhci_free_device_endpoint_resources(xhci, virt_dev, false);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
}
|
|
|
|
/* Everything but endpoint 0 is disabled, so free or cache the rings. */
|
|
last_freed_endpoint = 1;
|
|
for (i = 1; i < 31; ++i) {
|
|
struct xhci_virt_ep *ep = &virt_dev->eps[i];
|
|
|
|
if (ep->ep_state & EP_HAS_STREAMS) {
|
|
xhci_free_stream_info(xhci, ep->stream_info);
|
|
ep->stream_info = NULL;
|
|
ep->ep_state &= ~EP_HAS_STREAMS;
|
|
}
|
|
|
|
if (ep->ring) {
|
|
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
|
|
last_freed_endpoint = i;
|
|
}
|
|
}
|
|
xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
|
|
xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
|
|
ret = 0;
|
|
|
|
command_cleanup:
|
|
xhci_free_command(xhci, reset_device_cmd);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* At this point, the struct usb_device is about to go away, the device has
|
|
* disconnected, and all traffic has been stopped and the endpoints have been
|
|
* disabled. Free any HC data structures associated with that device.
|
|
*/
|
|
void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
struct xhci_virt_device *virt_dev;
|
|
unsigned long flags;
|
|
u32 state;
|
|
int i, ret;
|
|
|
|
ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
|
|
/* If the host is halted due to driver unload, we still need to free the
|
|
* device.
|
|
*/
|
|
if (ret <= 0 && ret != -ENODEV)
|
|
return;
|
|
|
|
virt_dev = xhci->devs[udev->slot_id];
|
|
|
|
/* Stop any wayward timer functions (which may grab the lock) */
|
|
for (i = 0; i < 31; ++i) {
|
|
virt_dev->eps[i].ep_state &= ~EP_HALT_PENDING;
|
|
del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
|
|
}
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
/* Don't disable the slot if the host controller is dead. */
|
|
state = xhci_readl(xhci, &xhci->op_regs->status);
|
|
if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
|
|
(xhci->xhc_state & XHCI_STATE_HALTED)) {
|
|
xhci_free_virt_device(xhci, udev->slot_id);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return;
|
|
}
|
|
|
|
if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
|
|
return;
|
|
}
|
|
xhci_ring_cmd_db(xhci);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
/*
|
|
* Event command completion handler will free any data structures
|
|
* associated with the slot. XXX Can free sleep?
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* Checks if we have enough host controller resources for the default control
|
|
* endpoint.
|
|
*
|
|
* Must be called with xhci->lock held.
|
|
*/
|
|
static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci)
|
|
{
|
|
if (xhci->num_active_eps + 1 > xhci->limit_active_eps) {
|
|
xhci_dbg(xhci, "Not enough ep ctxs: "
|
|
"%u active, need to add 1, limit is %u.\n",
|
|
xhci->num_active_eps, xhci->limit_active_eps);
|
|
return -ENOMEM;
|
|
}
|
|
xhci->num_active_eps += 1;
|
|
xhci_dbg(xhci, "Adding 1 ep ctx, %u now active.\n",
|
|
xhci->num_active_eps);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Returns 0 if the xHC ran out of device slots, the Enable Slot command
|
|
* timed out, or allocating memory failed. Returns 1 on success.
|
|
*/
|
|
int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
unsigned long flags;
|
|
int timeleft;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
|
|
if (ret) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
|
|
return 0;
|
|
}
|
|
xhci_ring_cmd_db(xhci);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
/* XXX: how much time for xHC slot assignment? */
|
|
timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
if (timeleft <= 0) {
|
|
xhci_warn(xhci, "%s while waiting for a slot\n",
|
|
timeleft == 0 ? "Timeout" : "Signal");
|
|
/* FIXME cancel the enable slot request */
|
|
return 0;
|
|
}
|
|
|
|
if (!xhci->slot_id) {
|
|
xhci_err(xhci, "Error while assigning device slot ID\n");
|
|
return 0;
|
|
}
|
|
|
|
if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
ret = xhci_reserve_host_control_ep_resources(xhci);
|
|
if (ret) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_warn(xhci, "Not enough host resources, "
|
|
"active endpoint contexts = %u\n",
|
|
xhci->num_active_eps);
|
|
goto disable_slot;
|
|
}
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
}
|
|
/* Use GFP_NOIO, since this function can be called from
|
|
* xhci_discover_or_reset_device(), which may be called as part of
|
|
* mass storage driver error handling.
|
|
*/
|
|
if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
|
|
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
|
|
goto disable_slot;
|
|
}
|
|
udev->slot_id = xhci->slot_id;
|
|
/* Is this a LS or FS device under a HS hub? */
|
|
/* Hub or peripherial? */
|
|
return 1;
|
|
|
|
disable_slot:
|
|
/* Disable slot, if we can do it without mem alloc */
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
|
|
xhci_ring_cmd_db(xhci);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Issue an Address Device command (which will issue a SetAddress request to
|
|
* the device).
|
|
* We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
|
|
* we should only issue and wait on one address command at the same time.
|
|
*
|
|
* We add one to the device address issued by the hardware because the USB core
|
|
* uses address 1 for the root hubs (even though they're not really devices).
|
|
*/
|
|
int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
|
|
{
|
|
unsigned long flags;
|
|
int timeleft;
|
|
struct xhci_virt_device *virt_dev;
|
|
int ret = 0;
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
u64 temp_64;
|
|
|
|
if (!udev->slot_id) {
|
|
xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
virt_dev = xhci->devs[udev->slot_id];
|
|
|
|
if (WARN_ON(!virt_dev)) {
|
|
/*
|
|
* In plug/unplug torture test with an NEC controller,
|
|
* a zero-dereference was observed once due to virt_dev = 0.
|
|
* Print useful debug rather than crash if it is observed again!
|
|
*/
|
|
xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
|
|
udev->slot_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
|
|
/*
|
|
* If this is the first Set Address since device plug-in or
|
|
* virt_device realloaction after a resume with an xHCI power loss,
|
|
* then set up the slot context.
|
|
*/
|
|
if (!slot_ctx->dev_info)
|
|
xhci_setup_addressable_virt_dev(xhci, udev);
|
|
/* Otherwise, update the control endpoint ring enqueue pointer. */
|
|
else
|
|
xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
|
|
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
|
|
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
|
|
udev->slot_id);
|
|
if (ret) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
|
|
return ret;
|
|
}
|
|
xhci_ring_cmd_db(xhci);
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
|
|
timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
/* FIXME: From section 4.3.4: "Software shall be responsible for timing
|
|
* the SetAddress() "recovery interval" required by USB and aborting the
|
|
* command on a timeout.
|
|
*/
|
|
if (timeleft <= 0) {
|
|
xhci_warn(xhci, "%s while waiting for a slot\n",
|
|
timeleft == 0 ? "Timeout" : "Signal");
|
|
/* FIXME cancel the address device command */
|
|
return -ETIME;
|
|
}
|
|
|
|
switch (virt_dev->cmd_status) {
|
|
case COMP_CTX_STATE:
|
|
case COMP_EBADSLT:
|
|
xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n",
|
|
udev->slot_id);
|
|
ret = -EINVAL;
|
|
break;
|
|
case COMP_TX_ERR:
|
|
dev_warn(&udev->dev, "Device not responding to set address.\n");
|
|
ret = -EPROTO;
|
|
break;
|
|
case COMP_DEV_ERR:
|
|
dev_warn(&udev->dev, "ERROR: Incompatible device for address "
|
|
"device command.\n");
|
|
ret = -ENODEV;
|
|
break;
|
|
case COMP_SUCCESS:
|
|
xhci_dbg(xhci, "Successful Address Device command\n");
|
|
break;
|
|
default:
|
|
xhci_err(xhci, "ERROR: unexpected command completion "
|
|
"code 0x%x.\n", virt_dev->cmd_status);
|
|
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
|
|
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
|
|
xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
|
|
xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
|
|
udev->slot_id,
|
|
&xhci->dcbaa->dev_context_ptrs[udev->slot_id],
|
|
(unsigned long long)
|
|
le64_to_cpu(xhci->dcbaa->dev_context_ptrs[udev->slot_id]));
|
|
xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
|
|
(unsigned long long)virt_dev->out_ctx->dma);
|
|
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
|
|
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
|
|
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
|
|
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
|
|
/*
|
|
* USB core uses address 1 for the roothubs, so we add one to the
|
|
* address given back to us by the HC.
|
|
*/
|
|
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
|
|
/* Use kernel assigned address for devices; store xHC assigned
|
|
* address locally. */
|
|
virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
|
|
+ 1;
|
|
/* Zero the input context control for later use */
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
|
|
ctrl_ctx->add_flags = 0;
|
|
ctrl_ctx->drop_flags = 0;
|
|
|
|
xhci_dbg(xhci, "Internal device address = %d\n", virt_dev->address);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Once a hub descriptor is fetched for a device, we need to update the xHC's
|
|
* internal data structures for the device.
|
|
*/
|
|
int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
|
|
struct usb_tt *tt, gfp_t mem_flags)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
struct xhci_virt_device *vdev;
|
|
struct xhci_command *config_cmd;
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
unsigned long flags;
|
|
unsigned think_time;
|
|
int ret;
|
|
|
|
/* Ignore root hubs */
|
|
if (!hdev->parent)
|
|
return 0;
|
|
|
|
vdev = xhci->devs[hdev->slot_id];
|
|
if (!vdev) {
|
|
xhci_warn(xhci, "Cannot update hub desc for unknown device.\n");
|
|
return -EINVAL;
|
|
}
|
|
config_cmd = xhci_alloc_command(xhci, true, true, mem_flags);
|
|
if (!config_cmd) {
|
|
xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
|
|
ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
|
|
ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
|
|
slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
|
|
slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
|
|
if (tt->multi)
|
|
slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
|
|
if (xhci->hci_version > 0x95) {
|
|
xhci_dbg(xhci, "xHCI version %x needs hub "
|
|
"TT think time and number of ports\n",
|
|
(unsigned int) xhci->hci_version);
|
|
slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(hdev->maxchild));
|
|
/* Set TT think time - convert from ns to FS bit times.
|
|
* 0 = 8 FS bit times, 1 = 16 FS bit times,
|
|
* 2 = 24 FS bit times, 3 = 32 FS bit times.
|
|
*
|
|
* xHCI 1.0: this field shall be 0 if the device is not a
|
|
* High-spped hub.
|
|
*/
|
|
think_time = tt->think_time;
|
|
if (think_time != 0)
|
|
think_time = (think_time / 666) - 1;
|
|
if (xhci->hci_version < 0x100 || hdev->speed == USB_SPEED_HIGH)
|
|
slot_ctx->tt_info |=
|
|
cpu_to_le32(TT_THINK_TIME(think_time));
|
|
} else {
|
|
xhci_dbg(xhci, "xHCI version %x doesn't need hub "
|
|
"TT think time or number of ports\n",
|
|
(unsigned int) xhci->hci_version);
|
|
}
|
|
slot_ctx->dev_state = 0;
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
|
|
xhci_dbg(xhci, "Set up %s for hub device.\n",
|
|
(xhci->hci_version > 0x95) ?
|
|
"configure endpoint" : "evaluate context");
|
|
xhci_dbg(xhci, "Slot %u Input Context:\n", hdev->slot_id);
|
|
xhci_dbg_ctx(xhci, config_cmd->in_ctx, 0);
|
|
|
|
/* Issue and wait for the configure endpoint or
|
|
* evaluate context command.
|
|
*/
|
|
if (xhci->hci_version > 0x95)
|
|
ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
|
|
false, false);
|
|
else
|
|
ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
|
|
true, false);
|
|
|
|
xhci_dbg(xhci, "Slot %u Output Context:\n", hdev->slot_id);
|
|
xhci_dbg_ctx(xhci, vdev->out_ctx, 0);
|
|
|
|
xhci_free_command(xhci, config_cmd);
|
|
return ret;
|
|
}
|
|
|
|
int xhci_get_frame(struct usb_hcd *hcd)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
/* EHCI mods by the periodic size. Why? */
|
|
return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
|
|
}
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int __init xhci_hcd_init(void)
|
|
{
|
|
#ifdef CONFIG_PCI
|
|
int retval = 0;
|
|
|
|
retval = xhci_register_pci();
|
|
|
|
if (retval < 0) {
|
|
printk(KERN_DEBUG "Problem registering PCI driver.");
|
|
return retval;
|
|
}
|
|
#endif
|
|
/*
|
|
* Check the compiler generated sizes of structures that must be laid
|
|
* out in specific ways for hardware access.
|
|
*/
|
|
BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
|
|
BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8);
|
|
BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8);
|
|
/* xhci_device_control has eight fields, and also
|
|
* embeds one xhci_slot_ctx and 31 xhci_ep_ctx
|
|
*/
|
|
BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
|
|
BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
|
|
BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
|
|
BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 7*32/8);
|
|
BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
|
|
/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
|
|
BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
|
|
BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
|
|
return 0;
|
|
}
|
|
module_init(xhci_hcd_init);
|
|
|
|
static void __exit xhci_hcd_cleanup(void)
|
|
{
|
|
#ifdef CONFIG_PCI
|
|
xhci_unregister_pci();
|
|
#endif
|
|
}
|
|
module_exit(xhci_hcd_cleanup);
|