mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 09:36:39 +07:00
8361cd79f2
The hald media changed polling does really confuse things. Noone knows why the delays are needed, but they give us access to the CD. An udelay(50) will give reliable access to the drive, but there is still one (or more) EH reset. The drive works without EH resets with udelay(100). Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
388 lines
9.5 KiB
C
388 lines
9.5 KiB
C
/*
|
|
* pata_sl82c105.c - SL82C105 PATA for new ATA layer
|
|
* (C) 2005 Red Hat Inc
|
|
* Alan Cox <alan@redhat.com>
|
|
*
|
|
* Based in part on linux/drivers/ide/pci/sl82c105.c
|
|
* SL82C105/Winbond 553 IDE driver
|
|
*
|
|
* and in part on the documentation and errata sheet
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_sl82c105"
|
|
#define DRV_VERSION "0.2.3"
|
|
|
|
enum {
|
|
/*
|
|
* SL82C105 PCI config register 0x40 bits.
|
|
*/
|
|
CTRL_IDE_IRQB = (1 << 30),
|
|
CTRL_IDE_IRQA = (1 << 28),
|
|
CTRL_LEGIRQ = (1 << 11),
|
|
CTRL_P1F16 = (1 << 5),
|
|
CTRL_P1EN = (1 << 4),
|
|
CTRL_P0F16 = (1 << 1),
|
|
CTRL_P0EN = (1 << 0)
|
|
};
|
|
|
|
/**
|
|
* sl82c105_pre_reset - probe begin
|
|
* @ap: ATA port
|
|
*
|
|
* Set up cable type and use generic probe init
|
|
*/
|
|
|
|
static int sl82c105_pre_reset(struct ata_port *ap)
|
|
{
|
|
static const struct pci_bits sl82c105_enable_bits[] = {
|
|
{ 0x40, 1, 0x01, 0x01 },
|
|
{ 0x40, 1, 0x10, 0x10 }
|
|
};
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
|
|
if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
|
|
return -ENOENT;
|
|
ap->cbl = ATA_CBL_PATA40;
|
|
return ata_std_prereset(ap);
|
|
}
|
|
|
|
|
|
static void sl82c105_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
|
|
}
|
|
|
|
|
|
/**
|
|
* sl82c105_configure_piomode - set chip PIO timing
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
* @pio: PIO mode
|
|
*
|
|
* Called to do the PIO mode setup. Our timing registers are shared
|
|
* so a configure_dmamode call will undo any work we do here and vice
|
|
* versa
|
|
*/
|
|
|
|
static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static u16 pio_timing[5] = {
|
|
0x50D, 0x407, 0x304, 0x242, 0x240
|
|
};
|
|
u16 dummy;
|
|
int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno);
|
|
|
|
pci_write_config_word(pdev, timing, pio_timing[pio]);
|
|
/* Can we lose this oddity of the old driver */
|
|
pci_read_config_word(pdev, timing, &dummy);
|
|
}
|
|
|
|
/**
|
|
* sl82c105_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the PIO mode setup. Our timing registers are shared
|
|
* but we want to set the PIO timing by default.
|
|
*/
|
|
|
|
static void sl82c105_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
sl82c105_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
|
|
}
|
|
|
|
/**
|
|
* sl82c105_configure_dmamode - set DMA mode in chip
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Load DMA cycle times into the chip ready for a DMA transfer
|
|
* to occur.
|
|
*/
|
|
|
|
static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static u16 dma_timing[3] = {
|
|
0x707, 0x201, 0x200
|
|
};
|
|
u16 dummy;
|
|
int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno);
|
|
int dma = adev->dma_mode - XFER_MW_DMA_0;
|
|
|
|
pci_write_config_word(pdev, timing, dma_timing[dma]);
|
|
/* Can we lose this oddity of the old driver */
|
|
pci_read_config_word(pdev, timing, &dummy);
|
|
}
|
|
|
|
/**
|
|
* sl82c105_set_dmamode - set initial DMA mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the DMA mode setup. This replaces the PIO timings
|
|
* for the device in question. Set appropriate PIO timings not DMA
|
|
* timings at this point.
|
|
*/
|
|
|
|
static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
switch(adev->dma_mode) {
|
|
case XFER_MW_DMA_0:
|
|
sl82c105_configure_piomode(ap, adev, 0);
|
|
break;
|
|
case XFER_MW_DMA_1:
|
|
sl82c105_configure_piomode(ap, adev, 3);
|
|
break;
|
|
case XFER_MW_DMA_2:
|
|
sl82c105_configure_piomode(ap, adev, 4);
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sl82c105_reset_engine - Reset the DMA engine
|
|
* @ap: ATA interface
|
|
*
|
|
* The sl82c105 has some serious problems with the DMA engine
|
|
* when transfers don't run as expected or ATAPI is used. The
|
|
* recommended fix is to reset the engine each use using a chip
|
|
* test register.
|
|
*/
|
|
|
|
static void sl82c105_reset_engine(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u16 val;
|
|
|
|
pci_read_config_word(pdev, 0x7E, &val);
|
|
pci_write_config_word(pdev, 0x7E, val | 4);
|
|
pci_write_config_word(pdev, 0x7E, val & ~4);
|
|
}
|
|
|
|
/**
|
|
* sl82c105_bmdma_start - DMA engine begin
|
|
* @qc: ATA command
|
|
*
|
|
* Reset the DMA engine each use as recommended by the errata
|
|
* document.
|
|
*
|
|
* FIXME: if we switch clock at BMDMA start/end we might get better
|
|
* PIO performance on DMA capable devices.
|
|
*/
|
|
|
|
static void sl82c105_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
udelay(100);
|
|
sl82c105_reset_engine(ap);
|
|
udelay(100);
|
|
|
|
/* Set the clocks for DMA */
|
|
sl82c105_configure_dmamode(ap, qc->dev);
|
|
/* Activate DMA */
|
|
ata_bmdma_start(qc);
|
|
}
|
|
|
|
/**
|
|
* sl82c105_bmdma_end - DMA engine stop
|
|
* @qc: ATA command
|
|
*
|
|
* Reset the DMA engine each use as recommended by the errata
|
|
* document.
|
|
*
|
|
* This function is also called to turn off DMA when a timeout occurs
|
|
* during DMA operation. In both cases we need to reset the engine,
|
|
* so no actual eng_timeout handler is required.
|
|
*
|
|
* We assume bmdma_stop is always called if bmdma_start as called. If
|
|
* not then we may need to wrap qc_issue.
|
|
*/
|
|
|
|
static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
ata_bmdma_stop(qc);
|
|
sl82c105_reset_engine(ap);
|
|
udelay(100);
|
|
|
|
/* This will redo the initial setup of the DMA device to matching
|
|
PIO timings */
|
|
sl82c105_set_dmamode(ap, qc->dev);
|
|
}
|
|
|
|
static struct scsi_host_template sl82c105_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static struct ata_port_operations sl82c105_port_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.set_piomode = sl82c105_set_piomode,
|
|
.set_dmamode = sl82c105_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.error_handler = sl82c105_error_handler,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = sl82c105_bmdma_start,
|
|
.bmdma_stop = sl82c105_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
/**
|
|
* sl82c105_bridge_revision - find bridge version
|
|
* @pdev: PCI device for the ATA function
|
|
*
|
|
* Locates the PCI bridge associated with the ATA function and
|
|
* providing it is a Winbond 553 reports the revision. If it cannot
|
|
* find a revision or the right device it returns -1
|
|
*/
|
|
|
|
static int sl82c105_bridge_revision(struct pci_dev *pdev)
|
|
{
|
|
struct pci_dev *bridge;
|
|
u8 rev;
|
|
|
|
/*
|
|
* The bridge should be part of the same device, but function 0.
|
|
*/
|
|
bridge = pci_get_slot(pdev->bus,
|
|
PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
|
|
if (!bridge)
|
|
return -1;
|
|
|
|
/*
|
|
* Make sure it is a Winbond 553 and is an ISA bridge.
|
|
*/
|
|
if (bridge->vendor != PCI_VENDOR_ID_WINBOND ||
|
|
bridge->device != PCI_DEVICE_ID_WINBOND_83C553 ||
|
|
bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) {
|
|
pci_dev_put(bridge);
|
|
return -1;
|
|
}
|
|
/*
|
|
* We need to find function 0's revision, not function 1
|
|
*/
|
|
pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
|
|
|
|
pci_dev_put(bridge);
|
|
return rev;
|
|
}
|
|
|
|
|
|
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
static struct ata_port_info info_dma = {
|
|
.sht = &sl82c105_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x07,
|
|
.port_ops = &sl82c105_port_ops
|
|
};
|
|
static struct ata_port_info info_early = {
|
|
.sht = &sl82c105_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
|
.pio_mask = 0x1f,
|
|
.port_ops = &sl82c105_port_ops
|
|
};
|
|
static struct ata_port_info *port_info[2] = { &info_early, &info_early };
|
|
u32 val;
|
|
int rev;
|
|
|
|
rev = sl82c105_bridge_revision(dev);
|
|
|
|
if (rev == -1)
|
|
dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n");
|
|
else if (rev <= 5)
|
|
dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n");
|
|
else {
|
|
port_info[0] = &info_dma;
|
|
port_info[1] = &info_dma;
|
|
}
|
|
|
|
pci_read_config_dword(dev, 0x40, &val);
|
|
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
|
|
pci_write_config_dword(dev, 0x40, val);
|
|
|
|
|
|
return ata_pci_init_one(dev, port_info, 1); /* For now */
|
|
}
|
|
|
|
static const struct pci_device_id sl82c105[] = {
|
|
{ PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver sl82c105_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sl82c105,
|
|
.probe = sl82c105_init_one,
|
|
.remove = ata_pci_remove_one
|
|
};
|
|
|
|
static int __init sl82c105_init(void)
|
|
{
|
|
return pci_register_driver(&sl82c105_pci_driver);
|
|
}
|
|
|
|
static void __exit sl82c105_exit(void)
|
|
{
|
|
pci_unregister_driver(&sl82c105_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for Sl82c105");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, sl82c105);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(sl82c105_init);
|
|
module_exit(sl82c105_exit);
|