AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
30eb8ea46c
linux_dsm_epyc7002/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
Manivannan Sadhasivam 1761101048 arm64: dts: hisilicon: hikey970: Add SD and WiFi support 
Add SD and WiFi support for HiKey970 board based on HI3670 SoC. Due to
the absence of the PMIC driver, fixed regulators are sourced to make the
driver working.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-04-08 15:50:00 +01:00

449 lines
9.9 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Hisilicon HiKey970 Development Board
*
* Copyright (C) 2016, Hisilicon Ltd.
* Copyright (C) 2018, Linaro Ltd.
*
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "hi3670.dtsi"
#include "hikey970-pinctrl.dtsi"
/ {
model = "HiKey970";
compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
aliases {
mshc1 = &dwmmc1;
mshc2 = &dwmmc2;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
serial6 = &uart6; /* console UART */
};
chosen {
stdout-path = "serial6:115200n8";
};
memory@0 {
device_type = "memory";
/* expect bootloader to fill in this region */
reg = <0x0 0x0 0x0 0x0>;
};
sd_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
sd_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO_051_WIFI_EN */
gpio = <&gpio6 3 0>;
/* WLAN card specific delay */
startup-delay-us = <70000>;
enable-active-high;
};
};
/*
* Legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
* anything the board)
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
* "" = no idea, schematic doesn't say, could be
* unrouted (not connected to any external pin)
* LSEC = Low Speed External Connector
* HSEC = High Speed External Connector
*
* Line names are taken from "hikey970-schematics.pdf" from HiSilicon.
*
* For the lines routed to the external connectors the
* lines are named after the 96Boards CE Specification 1.0,
* Appendix "Expansion Connector Signal Description".
*
* When the 96Board naming of a line and the schematic name of
* the same line are in conflict, the 96Board specification
* takes precedence, which means that the external UART on the
* LSEC is named UART0 while the schematic and SoC names this
* UART2. This is only for the informational lines i.e. "[FOO]",
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
* ones actually used for GPIO.
*/
&gpio0 {
/* GPIO_000-GPIO_007 */
gpio-line-names =
"",
"TP901", /* TEST_MODE connected to TP901 */
"",
"GPIO_003_USB_HUB_RESET_N",
"NC",
"[AP_GPS_REF_CLK]",
"[I2C3_SCL]",
"[I2C3_SDA]";
};
&gpio1 {
/* GPIO_008-GPIO_015 */
gpio-line-names =
"[UART0_CTS]", /* LSEC pin 3: GPIO_008_UART2_CTS_N */
"[UART0_RTS]", /* LSEC pin 9: GPIO_009_UART2_RTS_N */
"[UART0_TXD]", /* LSEC pin 5: GPIO_010_UART2_TXD */
"[UART0_RXD]", /* LSEC pin 7: GPIO_011_UART2_RXD */
"[USER_LED5]",
"GPIO-I", /* LSEC pin 31: GPIO_013_CAM0_RST_N */
"[USER_LED3]",
"[USER_LED4]";
};
&gpio2 {
/* GPIO_016-GPIO_023 */
gpio-line-names =
"GPIO-G", /* LSEC pin 29: GPIO_016_LCD_TE0 */
"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
"GPIO_019_BT_ACTIVE",
"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
"[I2C3_SDA]"; /* HSEC pin 38: ISP_SDA1 */
};
&gpio3 {
/* GPIO_024-GPIO_031 */
gpio-line-names =
"GPIO_024_WIFI_ACTIVE",
"GPIO_025_PERST_M.2",
"[I2C4_SCL]",
"[I2C4_SDA]",
"NC",
"GPIO-H", /* LSEC pin 30: GPIO_029_LCD_RST_N */
"[USER_LED1]",
"GPIO-L"; /* LSEC pin 34: GPIO_031 */
};
&gpio4 {
/* GPIO_032-GPIO_039 */
gpio-line-names =
"GPIO-K", /* LSEC pin 33: GPIO_032_CAM1_RST_N */
"GPIO_033_PMU1_EN",
"GPIO_034_USBSW_SEL",
/*
* These two pins should be used for SD(IO) data according
* to the 96boards specification but seems to be repurposed
* for UART 0. They are however named according to the spec.
*/
"[SD_DAT1]", /* HSEC pin 3: GPIO_035_UART0_RXD */
"[SD_DAT2]", /* HSEC pin 5: GPIO_036_UART0_TXD */
"[UART1_RXD]", /* LSEC pin 13: DEBUG_UART6_RXD */
"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
"[SOC_GPS_UART3_CTS_N]"; /* TP2304 */
};
&gpio5 {
/* GPIO_040-GPIO_047 */
gpio-line-names =
"[SOC_GPS_UART3_RTS_N]", /* TP2302 */
"[SOC_GPS_UART3_RXD]", /* TP2303 */
"[SOC_GPS_UART3_TXD]", /* TP2305 */
"[SOC_BT_UART4_CTS_N]",
"[SOC_BT_UART4_RTS_N]",
"[SOC_BT_UART4_RXD]",
"[SOC_BT_UART4_TXD]",
"NC";
};
&gpio6 {
/* GPIO_048-GPIO_055 */
gpio-line-names =
"NC",
"GPIO_049_USER_LED6",
"GPIO_050_CAN_RST",
"GPIO_051_WIFI_EN",
"GPIO-D", /* LSEC pin 26 */
"GPIO-J", /* LSEC pin 32 */
"GPIO_054_BT_EN",
"[GPIO_055_SEL]";
};
&gpio7 {
/* GPIO_056-GPIO_063 */
gpio-line-names =
"[PCIE_PERST_L]", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
};
&gpio8 {
/* GPIO_064-GPIO_071 */
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
};
&gpio9 {
/* GPIO_072-GPIO_079 */
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
};
&gpio10 {
/* GPIO_080-GPIO_087 */
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
};
&gpio11 {
/* GPIO_088-GPIO_095 */
gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
};
&gpio12 {
/* GPIO_096-GPIO_103 */
gpio-line-names = "NC", "", "", "", "", "", "", "";
};
&gpio13 {
/* GPIO_104-GPIO_111 */
gpio-line-names = "", "", "", "", "", "", "", "";
};
&gpio14 {
/* GPIO_112-GPIO_119 */
gpio-line-names = "", "", "", "", "", "", "", "";
};
&gpio15 {
/* GPIO_120-GPIO_127 */
gpio-line-names = "", "", "", "", "", "", "", "";
};
&gpio16 {
/* GPIO_128-GPIO_135 */
gpio-line-names =
"[WL_SDIO_CLK]",
"[WL_SDIO_CMD]",
"[WL_SDIO_DATA0]",
"[WL_SDIO_DATA1]",
"[WL_SDIO_DATA2]",
"[WL_SDIO_DATA3]",
"[ETH_ISOLATE]",
"NC";
};
&gpio17 {
/* GPIO_136-GPIO_143 */
gpio-line-names =
"[MINI1CLK_EN]", "NC", "", "", "", "", "", "";
};
&gpio18 {
/* GPIO_144-GPIO_151 */
gpio-line-names =
"[SPI1_SCLK]", /* HSEC pin 9: GPIO_144_SPI3_CLK */
"[SPI1_DIN]", /* HSEC pin 11: GPIO_145_SPI3_DI */
"[SPI1_DOUT]", /* HSEC pin 1: GPIO_146_SPI3_DO */
"[SPI1_CS]", /* HSEC pin 7: GPIO_147_SPI3_CS0_N */
"[POWER_INT_N]",
"[CDMA_GPS_SYNC]",
"GPIO_150_PEX_INTA",
"GPIO_151_CAN_INT";
};
&gpio19 {
/* GPIO_152-GPIO_159 */
gpio-line-names = "", "", "", "", "", "", "", "";
};
&gpio20 {
/* GPIO_160-GPIO_167 */
gpio-line-names =
"[SD_CLK]",
"[SD_CMD]",
"[SD_DATA0]",
"[SD_DATA1]",
"[SD_DATA2]",
"[SD_DATA3]",
"GPIO_166_ETHCLK_EN",
"GPIO_167_USER_LED2";
};
&gpio21 {
/* GPIO_168-GPIO_175 */
gpio-line-names =
"GPIO_168_GPS_EN",
"GPIO-C", /* LSEC pin 25: GPIO_169_USIM1_CLK */
"GPIO-E", /* LSEC pin 27: GPIO_170_USIM1_RST */
"GPIO-B", /* LSEC pin 24: GPIO_171_USIM1_DATA */
"", "", "", "", "";
};
&gpio22 {
/* GPIO_176-GPIO_183 */
gpio-line-names =
"[PMU_PWR_HOLD]",
"GPIO_177_WL_WAKEUP_AP",
"[JTAG_TCK]",
"[JTAG_TMS]",
"[JTAG_TDI]",
"[JTAG_TMS]",
"GPIO_182_FATAL_ERR",
"NC";
};
&gpio23 {
/* GPIO_184-GPIO_191 */
gpio-line-names =
"GPIO_184_JTAG_SEL",
"GPIO-F", /* LSEC pin 28: GPIO_185_LCD_BL_PWM */
"[I2C0_SCL]", /* LSEC pin 15: GPIO_186_I2C0_SCL */
"[I2C0_SDA]", /* LSEC pin 17: GPIO_187_I2C0_SDA */
"[GPIO_188_I2C1_SCL]", /* Actual SoC I2C1_SCL */
"[GPIO_189_I2C1_SDA]", /* Actual SoC I2C1_SDA */
"[I2C1_SCL]", /* LSEC pin 19: GPIO_190_I2C2_SCL */
"[I2C2_SDA]"; /* LSEC pin 21: GPIO_191_I2C2_SDA */
};
&gpio24 {
/* GPIO_192-GPIO_199 */
gpio-line-names =
"[SD_LED]",
"NC",
"[PCM_DI]", /* LSEC pin 22: GPIO_194_I2S0_DI */
"[PCM_DO]", /* LSEC pin 20: GPIO_195_I2S0_DO */
"[PCM_CLK]", /* LSEC pin 18: GPIO_196_I2S0_XCLK */
"[PCM_FS]", /* LSEC pin 16: GPIO_197_I2S0_XFS */
"",
"[I2S2_DO]";
};
&gpio25 {
/* GPIO_200-GPIO_207 */
gpio-line-names =
"[I2S2_XCLK]",
"[I2S2_XFS]",
"GPIO_202_PERST_ETH",
"GPIO_203_PWRON_DET",
"GPIO_204_PMU1_IRQ_N",
"GPIO_205_SD_DET",
"GPIO_206_GPS_MOTION_INT",
"GPIO_207_HDMI_SEL";
};
&gpio26 {
/* GPIO_208-GPIO_215 */
gpio-line-names =
"GPIO-A", /* LSEC pin 23: GPIO_208_WAKEUP_SOC */
"GPIO_209_VBUS_TYPEC",
"NC",
"NC",
"NC",
"[SPI0_SCLK]", /* LSEC pin 8: GPIO_213_SPI2_CLK */
"[SPI0_DIN]", /* LSEC pin 10: GPIO_214_SPI2_DI */
"[SPI0_DOUT]"; /* LSEC pin 14: GPIO_215_SPI2_DO */
};
&gpio27 {
/* GPIO_216-GPIO_223 */
gpio-line-names =
"[SPI0_CS]", /* LSEC pin 12: GPIO_216_SPI2_CS0_N */
"GPIO_217_HDMI_PD",
"GPIO_218_GPS_WAKEUP_AP",
"GPIO_219_M.2CLK_EN",
"GPIO_220_PERST_MINI",
"GPIO_221_CC_INT",
"[PCIE_CLKREQ_L]",
"NC";
};
&gpio28 {
/* GPIO_224-GPIO_231 */
gpio-line-names =
"[PMU0_INT]",
"[SPMI_DATA]",
"[SPMI_CLK]",
"[CAN_SPI_CLK]",
"[CAN_SPI_DI]",
"[CAN_SPI_DO]",
"[CAN_SPI_CS]",
"GPIO_231_HDMI_INT";
};
&dwmmc1 {
bus-width = <0x4>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
cap-sd-highspeed;
disable-wp;
cd-inverted;
cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sd_pmx_func
&sd_clk_cfg_func
&sd_cfg_func>;
vmmc-supply = <&sd_3v3>;
vqmmc-supply = <&sd_1v8>;
status = "okay";
};
&dwmmc2 { /* WIFI */
bus-width = <0x4>;
non-removable;
broken-cd;
cap-power-off-card;
pinctrl-names = "default";
pinctrl-0 = <&sdio_pmx_func
&sdio_clk_cfg_func
&sdio_cfg_func>;
/* WL_EN */
vmmc-supply = <&wlan_en>;
status = "ok";
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>; /* sdio func num */
/* WL_IRQ, GPIO_177_WL_WAKEUP_AP */
interrupt-parent = <&gpio22>;
interrupts = <1 IRQ_TYPE_EDGE_RISING>;
};
};
&uart0 {
/* On High speed expansion header */
label = "HS-UART0";
status = "okay";
};
&uart2 {
/* On Low speed expansion header */
label = "LS-UART0";
status = "okay";
};
&uart6 {
/* On Low speed expansion header */
label = "LS-UART1";
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink