mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 07:06:45 +07:00
3c6bee1d40
ICC likes to complain about storage class not being first, GCC doesn't care much (except for cases like "inline static"). have a hard time seeing how it could break anything. Thanks to Gabriel A. Devenyi for pointing out http://linuxicc.sourceforge.net/ which is what made me create this patch. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
684 lines
20 KiB
C
684 lines
20 KiB
C
/*
|
|
* drivers/mtd/nand/rtc_from4.c
|
|
*
|
|
* Copyright (C) 2004 Red Hat, Inc.
|
|
*
|
|
* Derived from drivers/mtd/nand/spia.c
|
|
* Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
|
|
*
|
|
* $Id: rtc_from4.c,v 1.10 2005/11/07 11:14:31 gleixner Exp $
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Overview:
|
|
* This is a device driver for the AG-AND flash device found on the
|
|
* Renesas Technology Corp. Flash ROM 4-slot interface board (FROM_BOARD4),
|
|
* which utilizes the Renesas HN29V1G91T-30 part.
|
|
* This chip is a 1 GBibit (128MiB x 8 bits) AG-AND flash device.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/rslib.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/compatmac.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <asm/io.h>
|
|
|
|
/*
|
|
* MTD structure for Renesas board
|
|
*/
|
|
static struct mtd_info *rtc_from4_mtd = NULL;
|
|
|
|
#define RTC_FROM4_MAX_CHIPS 2
|
|
|
|
/* HS77x9 processor register defines */
|
|
#define SH77X9_BCR1 ((volatile unsigned short *)(0xFFFFFF60))
|
|
#define SH77X9_BCR2 ((volatile unsigned short *)(0xFFFFFF62))
|
|
#define SH77X9_WCR1 ((volatile unsigned short *)(0xFFFFFF64))
|
|
#define SH77X9_WCR2 ((volatile unsigned short *)(0xFFFFFF66))
|
|
#define SH77X9_MCR ((volatile unsigned short *)(0xFFFFFF68))
|
|
#define SH77X9_PCR ((volatile unsigned short *)(0xFFFFFF6C))
|
|
#define SH77X9_FRQCR ((volatile unsigned short *)(0xFFFFFF80))
|
|
|
|
/*
|
|
* Values specific to the Renesas Technology Corp. FROM_BOARD4 (used with HS77x9 processor)
|
|
*/
|
|
/* Address where flash is mapped */
|
|
#define RTC_FROM4_FIO_BASE 0x14000000
|
|
|
|
/* CLE and ALE are tied to address lines 5 & 4, respectively */
|
|
#define RTC_FROM4_CLE (1 << 5)
|
|
#define RTC_FROM4_ALE (1 << 4)
|
|
|
|
/* address lines A24-A22 used for chip selection */
|
|
#define RTC_FROM4_NAND_ADDR_SLOT3 (0x00800000)
|
|
#define RTC_FROM4_NAND_ADDR_SLOT4 (0x00C00000)
|
|
#define RTC_FROM4_NAND_ADDR_FPGA (0x01000000)
|
|
/* mask address lines A24-A22 used for chip selection */
|
|
#define RTC_FROM4_NAND_ADDR_MASK (RTC_FROM4_NAND_ADDR_SLOT3 | RTC_FROM4_NAND_ADDR_SLOT4 | RTC_FROM4_NAND_ADDR_FPGA)
|
|
|
|
/* FPGA status register for checking device ready (bit zero) */
|
|
#define RTC_FROM4_FPGA_SR (RTC_FROM4_NAND_ADDR_FPGA | 0x00000002)
|
|
#define RTC_FROM4_DEVICE_READY 0x0001
|
|
|
|
/* FPGA Reed-Solomon ECC Control register */
|
|
|
|
#define RTC_FROM4_RS_ECC_CTL (RTC_FROM4_NAND_ADDR_FPGA | 0x00000050)
|
|
#define RTC_FROM4_RS_ECC_CTL_CLR (1 << 7)
|
|
#define RTC_FROM4_RS_ECC_CTL_GEN (1 << 6)
|
|
#define RTC_FROM4_RS_ECC_CTL_FD_E (1 << 5)
|
|
|
|
/* FPGA Reed-Solomon ECC code base */
|
|
#define RTC_FROM4_RS_ECC (RTC_FROM4_NAND_ADDR_FPGA | 0x00000060)
|
|
#define RTC_FROM4_RS_ECCN (RTC_FROM4_NAND_ADDR_FPGA | 0x00000080)
|
|
|
|
/* FPGA Reed-Solomon ECC check register */
|
|
#define RTC_FROM4_RS_ECC_CHK (RTC_FROM4_NAND_ADDR_FPGA | 0x00000070)
|
|
#define RTC_FROM4_RS_ECC_CHK_ERROR (1 << 7)
|
|
|
|
#define ERR_STAT_ECC_AVAILABLE 0x20
|
|
|
|
/* Undefine for software ECC */
|
|
#define RTC_FROM4_HWECC 1
|
|
|
|
/* Define as 1 for no virtual erase blocks (in JFFS2) */
|
|
#define RTC_FROM4_NO_VIRTBLOCKS 0
|
|
|
|
/*
|
|
* Module stuff
|
|
*/
|
|
static void __iomem *rtc_from4_fio_base = (void *)P2SEGADDR(RTC_FROM4_FIO_BASE);
|
|
|
|
static const struct mtd_partition partition_info[] = {
|
|
{
|
|
.name = "Renesas flash partition 1",
|
|
.offset = 0,
|
|
.size = MTDPART_SIZ_FULL
|
|
},
|
|
};
|
|
#define NUM_PARTITIONS 1
|
|
|
|
/*
|
|
* hardware specific flash bbt decriptors
|
|
* Note: this is to allow debugging by disabling
|
|
* NAND_BBT_CREATE and/or NAND_BBT_WRITE
|
|
*
|
|
*/
|
|
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
|
|
static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
|
|
|
|
static struct nand_bbt_descr rtc_from4_bbt_main_descr = {
|
|
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
|
|
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
|
|
.offs = 40,
|
|
.len = 4,
|
|
.veroffs = 44,
|
|
.maxblocks = 4,
|
|
.pattern = bbt_pattern
|
|
};
|
|
|
|
static struct nand_bbt_descr rtc_from4_bbt_mirror_descr = {
|
|
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
|
|
| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
|
|
.offs = 40,
|
|
.len = 4,
|
|
.veroffs = 44,
|
|
.maxblocks = 4,
|
|
.pattern = mirror_pattern
|
|
};
|
|
|
|
|
|
|
|
#ifdef RTC_FROM4_HWECC
|
|
|
|
/* the Reed Solomon control structure */
|
|
static struct rs_control *rs_decoder;
|
|
|
|
/*
|
|
* hardware specific Out Of Band information
|
|
*/
|
|
static struct nand_oobinfo rtc_from4_nand_oobinfo = {
|
|
.useecc = MTD_NANDECC_AUTOPLACE,
|
|
.eccbytes = 32,
|
|
.eccpos = {
|
|
0, 1, 2, 3, 4, 5, 6, 7,
|
|
8, 9, 10, 11, 12, 13, 14, 15,
|
|
16, 17, 18, 19, 20, 21, 22, 23,
|
|
24, 25, 26, 27, 28, 29, 30, 31},
|
|
.oobfree = { {32, 32} }
|
|
};
|
|
|
|
/* Aargh. I missed the reversed bit order, when I
|
|
* was talking to Renesas about the FPGA.
|
|
*
|
|
* The table is used for bit reordering and inversion
|
|
* of the ecc byte which we get from the FPGA
|
|
*/
|
|
static uint8_t revbits[256] = {
|
|
0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
|
|
0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
|
|
0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
|
|
0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
|
|
0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
|
|
0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
|
|
0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
|
|
0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
|
|
0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
|
|
0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
|
|
0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
|
|
0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
|
|
0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
|
|
0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
|
|
0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
|
|
0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
|
|
0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
|
|
0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
|
|
0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
|
|
0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
|
|
0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
|
|
0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
|
|
0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
|
|
0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
|
|
0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
|
|
0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
|
|
0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
|
|
0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
|
|
0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
|
|
0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
|
|
0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
|
|
0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
|
|
};
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
* rtc_from4_hwcontrol - hardware specific access to control-lines
|
|
* @mtd: MTD device structure
|
|
* @cmd: hardware control command
|
|
*
|
|
* Address lines (A5 and A4) are used to control Command and Address Latch
|
|
* Enable on this board, so set the read/write address appropriately.
|
|
*
|
|
* Chip Enable is also controlled by the Chip Select (CS5) and
|
|
* Address lines (A24-A22), so no action is required here.
|
|
*
|
|
*/
|
|
static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd)
|
|
{
|
|
struct nand_chip* this = (struct nand_chip *) (mtd->priv);
|
|
|
|
switch(cmd) {
|
|
|
|
case NAND_CTL_SETCLE:
|
|
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_CLE);
|
|
break;
|
|
case NAND_CTL_CLRCLE:
|
|
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_CLE);
|
|
break;
|
|
|
|
case NAND_CTL_SETALE:
|
|
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_ALE);
|
|
break;
|
|
case NAND_CTL_CLRALE:
|
|
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_ALE);
|
|
break;
|
|
|
|
case NAND_CTL_SETNCE:
|
|
break;
|
|
case NAND_CTL_CLRNCE:
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* rtc_from4_nand_select_chip - hardware specific chip select
|
|
* @mtd: MTD device structure
|
|
* @chip: Chip to select (0 == slot 3, 1 == slot 4)
|
|
*
|
|
* The chip select is based on address lines A24-A22.
|
|
* This driver uses flash slots 3 and 4 (A23-A22).
|
|
*
|
|
*/
|
|
static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R & ~RTC_FROM4_NAND_ADDR_MASK);
|
|
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_NAND_ADDR_MASK);
|
|
|
|
switch(chip) {
|
|
|
|
case 0: /* select slot 3 chip */
|
|
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT3);
|
|
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT3);
|
|
break;
|
|
case 1: /* select slot 4 chip */
|
|
this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT4);
|
|
this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT4);
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* rtc_from4_nand_device_ready - hardware specific ready/busy check
|
|
* @mtd: MTD device structure
|
|
*
|
|
* This board provides the Ready/Busy state in the status register
|
|
* of the FPGA. Bit zero indicates the RDY(1)/BSY(0) signal.
|
|
*
|
|
*/
|
|
static int rtc_from4_nand_device_ready(struct mtd_info *mtd)
|
|
{
|
|
unsigned short status;
|
|
|
|
status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_FPGA_SR));
|
|
|
|
return (status & RTC_FROM4_DEVICE_READY);
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* deplete - code to perform device recovery in case there was a power loss
|
|
* @mtd: MTD device structure
|
|
* @chip: Chip to select (0 == slot 3, 1 == slot 4)
|
|
*
|
|
* If there was a sudden loss of power during an erase operation, a
|
|
* "device recovery" operation must be performed when power is restored
|
|
* to ensure correct operation. This routine performs the required steps
|
|
* for the requested chip.
|
|
*
|
|
* See page 86 of the data sheet for details.
|
|
*
|
|
*/
|
|
static void deplete(struct mtd_info *mtd, int chip)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
/* wait until device is ready */
|
|
while (!this->dev_ready(mtd));
|
|
|
|
this->select_chip(mtd, chip);
|
|
|
|
/* Send the commands for device recovery, phase 1 */
|
|
this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000);
|
|
this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1);
|
|
|
|
/* Send the commands for device recovery, phase 2 */
|
|
this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004);
|
|
this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1);
|
|
|
|
}
|
|
|
|
|
|
#ifdef RTC_FROM4_HWECC
|
|
/*
|
|
* rtc_from4_enable_hwecc - hardware specific hardware ECC enable function
|
|
* @mtd: MTD device structure
|
|
* @mode: I/O mode; read or write
|
|
*
|
|
* enable hardware ECC for data read or write
|
|
*
|
|
*/
|
|
static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode)
|
|
{
|
|
volatile unsigned short * rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL);
|
|
unsigned short status;
|
|
|
|
switch (mode) {
|
|
case NAND_ECC_READ :
|
|
status = RTC_FROM4_RS_ECC_CTL_CLR
|
|
| RTC_FROM4_RS_ECC_CTL_FD_E;
|
|
|
|
*rs_ecc_ctl = status;
|
|
break;
|
|
|
|
case NAND_ECC_READSYN :
|
|
status = 0x00;
|
|
|
|
*rs_ecc_ctl = status;
|
|
break;
|
|
|
|
case NAND_ECC_WRITE :
|
|
status = RTC_FROM4_RS_ECC_CTL_CLR
|
|
| RTC_FROM4_RS_ECC_CTL_GEN
|
|
| RTC_FROM4_RS_ECC_CTL_FD_E;
|
|
|
|
*rs_ecc_ctl = status;
|
|
break;
|
|
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* rtc_from4_calculate_ecc - hardware specific code to read ECC code
|
|
* @mtd: MTD device structure
|
|
* @dat: buffer containing the data to generate ECC codes
|
|
* @ecc_code ECC codes calculated
|
|
*
|
|
* The ECC code is calculated by the FPGA. All we have to do is read the values
|
|
* from the FPGA registers.
|
|
*
|
|
* Note: We read from the inverted registers, since data is inverted before
|
|
* the code is calculated. So all 0xff data (blank page) results in all 0xff rs code
|
|
*
|
|
*/
|
|
static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
|
|
{
|
|
volatile unsigned short * rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN);
|
|
unsigned short value;
|
|
int i;
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
value = *rs_eccn;
|
|
ecc_code[i] = (unsigned char)value;
|
|
rs_eccn++;
|
|
}
|
|
ecc_code[7] |= 0x0f; /* set the last four bits (not used) */
|
|
}
|
|
|
|
|
|
/*
|
|
* rtc_from4_correct_data - hardware specific code to correct data using ECC code
|
|
* @mtd: MTD device structure
|
|
* @buf: buffer containing the data to generate ECC codes
|
|
* @ecc1 ECC codes read
|
|
* @ecc2 ECC codes calculated
|
|
*
|
|
* The FPGA tells us fast, if there's an error or not. If no, we go back happy
|
|
* else we read the ecc results from the fpga and call the rs library to decode
|
|
* and hopefully correct the error.
|
|
*
|
|
*/
|
|
static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2)
|
|
{
|
|
int i, j, res;
|
|
unsigned short status;
|
|
uint16_t par[6], syn[6];
|
|
uint8_t ecc[8];
|
|
volatile unsigned short *rs_ecc;
|
|
|
|
status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CHK));
|
|
|
|
if (!(status & RTC_FROM4_RS_ECC_CHK_ERROR)) {
|
|
return 0;
|
|
}
|
|
|
|
/* Read the syndrom pattern from the FPGA and correct the bitorder */
|
|
rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC);
|
|
for (i = 0; i < 8; i++) {
|
|
ecc[i] = revbits[(*rs_ecc) & 0xFF];
|
|
rs_ecc++;
|
|
}
|
|
|
|
/* convert into 6 10bit syndrome fields */
|
|
par[5] = rs_decoder->index_of[(((uint16_t)ecc[0] >> 0) & 0x0ff) |
|
|
(((uint16_t)ecc[1] << 8) & 0x300)];
|
|
par[4] = rs_decoder->index_of[(((uint16_t)ecc[1] >> 2) & 0x03f) |
|
|
(((uint16_t)ecc[2] << 6) & 0x3c0)];
|
|
par[3] = rs_decoder->index_of[(((uint16_t)ecc[2] >> 4) & 0x00f) |
|
|
(((uint16_t)ecc[3] << 4) & 0x3f0)];
|
|
par[2] = rs_decoder->index_of[(((uint16_t)ecc[3] >> 6) & 0x003) |
|
|
(((uint16_t)ecc[4] << 2) & 0x3fc)];
|
|
par[1] = rs_decoder->index_of[(((uint16_t)ecc[5] >> 0) & 0x0ff) |
|
|
(((uint16_t)ecc[6] << 8) & 0x300)];
|
|
par[0] = (((uint16_t)ecc[6] >> 2) & 0x03f) | (((uint16_t)ecc[7] << 6) & 0x3c0);
|
|
|
|
/* Convert to computable syndrome */
|
|
for (i = 0; i < 6; i++) {
|
|
syn[i] = par[0];
|
|
for (j = 1; j < 6; j++)
|
|
if (par[j] != rs_decoder->nn)
|
|
syn[i] ^= rs_decoder->alpha_to[rs_modnn(rs_decoder, par[j] + i * j)];
|
|
|
|
/* Convert to index form */
|
|
syn[i] = rs_decoder->index_of[syn[i]];
|
|
}
|
|
|
|
/* Let the library code do its magic.*/
|
|
res = decode_rs8(rs_decoder, (uint8_t *)buf, par, 512, syn, 0, NULL, 0xff, NULL);
|
|
if (res > 0) {
|
|
DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: "
|
|
"ECC corrected %d errors on read\n", res);
|
|
}
|
|
return res;
|
|
}
|
|
|
|
|
|
/**
|
|
* rtc_from4_errstat - perform additional error status checks
|
|
* @mtd: MTD device structure
|
|
* @this: NAND chip structure
|
|
* @state: state or the operation
|
|
* @status: status code returned from read status
|
|
* @page: startpage inside the chip, must be called with (page & this->pagemask)
|
|
*
|
|
* Perform additional error status checks on erase and write failures
|
|
* to determine if errors are correctable. For this device, correctable
|
|
* 1-bit errors on erase and write are considered acceptable.
|
|
*
|
|
* note: see pages 34..37 of data sheet for details.
|
|
*
|
|
*/
|
|
static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page)
|
|
{
|
|
int er_stat=0;
|
|
int rtn, retlen;
|
|
size_t len;
|
|
uint8_t *buf;
|
|
int i;
|
|
|
|
this->cmdfunc (mtd, NAND_CMD_STATUS_CLEAR, -1, -1);
|
|
|
|
if (state == FL_ERASING) {
|
|
for (i=0; i<4; i++) {
|
|
if (status & 1<<(i+1)) {
|
|
this->cmdfunc (mtd, (NAND_CMD_STATUS_ERROR + i + 1), -1, -1);
|
|
rtn = this->read_byte(mtd);
|
|
this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1);
|
|
if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
|
|
er_stat |= 1<<(i+1); /* err_ecc_not_avail */
|
|
}
|
|
}
|
|
}
|
|
} else if (state == FL_WRITING) {
|
|
/* single bank write logic */
|
|
this->cmdfunc (mtd, NAND_CMD_STATUS_ERROR, -1, -1);
|
|
rtn = this->read_byte(mtd);
|
|
this->cmdfunc (mtd, NAND_CMD_STATUS_RESET, -1, -1);
|
|
if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
|
|
er_stat |= 1<<1; /* err_ecc_not_avail */
|
|
} else {
|
|
len = mtd->oobblock;
|
|
buf = kmalloc (len, GFP_KERNEL);
|
|
if (!buf) {
|
|
printk (KERN_ERR "rtc_from4_errstat: Out of memory!\n");
|
|
er_stat = 1; /* if we can't check, assume failed */
|
|
} else {
|
|
/* recovery read */
|
|
/* page read */
|
|
rtn = nand_do_read_ecc (mtd, page, len, &retlen, buf, NULL, this->autooob, 1);
|
|
if (rtn) { /* if read failed or > 1-bit error corrected */
|
|
er_stat |= 1<<1; /* ECC read failed */
|
|
}
|
|
kfree(buf);
|
|
}
|
|
}
|
|
}
|
|
|
|
rtn = status;
|
|
if (er_stat == 0) { /* if ECC is available */
|
|
rtn = (status & ~NAND_STATUS_FAIL); /* clear the error bit */
|
|
}
|
|
|
|
return rtn;
|
|
}
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Main initialization routine
|
|
*/
|
|
int __init rtc_from4_init (void)
|
|
{
|
|
struct nand_chip *this;
|
|
unsigned short bcr1, bcr2, wcr2;
|
|
int i;
|
|
|
|
/* Allocate memory for MTD device structure and private data */
|
|
rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof (struct nand_chip),
|
|
GFP_KERNEL);
|
|
if (!rtc_from4_mtd) {
|
|
printk ("Unable to allocate Renesas NAND MTD device structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Get pointer to private data */
|
|
this = (struct nand_chip *) (&rtc_from4_mtd[1]);
|
|
|
|
/* Initialize structures */
|
|
memset((char *) rtc_from4_mtd, 0, sizeof(struct mtd_info));
|
|
memset((char *) this, 0, sizeof(struct nand_chip));
|
|
|
|
/* Link the private data with the MTD structure */
|
|
rtc_from4_mtd->priv = this;
|
|
|
|
/* set area 5 as PCMCIA mode to clear the spec of tDH(Data hold time;9ns min) */
|
|
bcr1 = *SH77X9_BCR1 & ~0x0002;
|
|
bcr1 |= 0x0002;
|
|
*SH77X9_BCR1 = bcr1;
|
|
|
|
/* set */
|
|
bcr2 = *SH77X9_BCR2 & ~0x0c00;
|
|
bcr2 |= 0x0800;
|
|
*SH77X9_BCR2 = bcr2;
|
|
|
|
/* set area 5 wait states */
|
|
wcr2 = *SH77X9_WCR2 & ~0x1c00;
|
|
wcr2 |= 0x1c00;
|
|
*SH77X9_WCR2 = wcr2;
|
|
|
|
/* Set address of NAND IO lines */
|
|
this->IO_ADDR_R = rtc_from4_fio_base;
|
|
this->IO_ADDR_W = rtc_from4_fio_base;
|
|
/* Set address of hardware control function */
|
|
this->hwcontrol = rtc_from4_hwcontrol;
|
|
/* Set address of chip select function */
|
|
this->select_chip = rtc_from4_nand_select_chip;
|
|
/* command delay time (in us) */
|
|
this->chip_delay = 100;
|
|
/* return the status of the Ready/Busy line */
|
|
this->dev_ready = rtc_from4_nand_device_ready;
|
|
|
|
#ifdef RTC_FROM4_HWECC
|
|
printk(KERN_INFO "rtc_from4_init: using hardware ECC detection.\n");
|
|
|
|
this->eccmode = NAND_ECC_HW8_512;
|
|
this->options |= NAND_HWECC_SYNDROME;
|
|
/* return the status of extra status and ECC checks */
|
|
this->errstat = rtc_from4_errstat;
|
|
/* set the nand_oobinfo to support FPGA H/W error detection */
|
|
this->autooob = &rtc_from4_nand_oobinfo;
|
|
this->enable_hwecc = rtc_from4_enable_hwecc;
|
|
this->calculate_ecc = rtc_from4_calculate_ecc;
|
|
this->correct_data = rtc_from4_correct_data;
|
|
#else
|
|
printk(KERN_INFO "rtc_from4_init: using software ECC detection.\n");
|
|
|
|
this->eccmode = NAND_ECC_SOFT;
|
|
#endif
|
|
|
|
/* set the bad block tables to support debugging */
|
|
this->bbt_td = &rtc_from4_bbt_main_descr;
|
|
this->bbt_md = &rtc_from4_bbt_mirror_descr;
|
|
|
|
/* Scan to find existence of the device */
|
|
if (nand_scan(rtc_from4_mtd, RTC_FROM4_MAX_CHIPS)) {
|
|
kfree(rtc_from4_mtd);
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Perform 'device recovery' for each chip in case there was a power loss. */
|
|
for (i=0; i < this->numchips; i++) {
|
|
deplete(rtc_from4_mtd, i);
|
|
}
|
|
|
|
#if RTC_FROM4_NO_VIRTBLOCKS
|
|
/* use a smaller erase block to minimize wasted space when a block is bad */
|
|
/* note: this uses eight times as much RAM as using the default and makes */
|
|
/* mounts take four times as long. */
|
|
rtc_from4_mtd->flags |= MTD_NO_VIRTBLOCKS;
|
|
#endif
|
|
|
|
/* Register the partitions */
|
|
add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS);
|
|
|
|
#ifdef RTC_FROM4_HWECC
|
|
/* We could create the decoder on demand, if memory is a concern.
|
|
* This way we have it handy, if an error happens
|
|
*
|
|
* Symbolsize is 10 (bits)
|
|
* Primitve polynomial is x^10+x^3+1
|
|
* first consecutive root is 0
|
|
* primitve element to generate roots = 1
|
|
* generator polinomial degree = 6
|
|
*/
|
|
rs_decoder = init_rs(10, 0x409, 0, 1, 6);
|
|
if (!rs_decoder) {
|
|
printk (KERN_ERR "Could not create a RS decoder\n");
|
|
nand_release(rtc_from4_mtd);
|
|
kfree(rtc_from4_mtd);
|
|
return -ENOMEM;
|
|
}
|
|
#endif
|
|
/* Return happy */
|
|
return 0;
|
|
}
|
|
module_init(rtc_from4_init);
|
|
|
|
|
|
/*
|
|
* Clean up routine
|
|
*/
|
|
#ifdef MODULE
|
|
static void __exit rtc_from4_cleanup (void)
|
|
{
|
|
/* Release resource, unregister partitions */
|
|
nand_release(rtc_from4_mtd);
|
|
|
|
/* Free the MTD device structure */
|
|
kfree (rtc_from4_mtd);
|
|
|
|
#ifdef RTC_FROM4_HWECC
|
|
/* Free the reed solomon resources */
|
|
if (rs_decoder) {
|
|
free_rs(rs_decoder);
|
|
}
|
|
#endif
|
|
}
|
|
module_exit(rtc_from4_cleanup);
|
|
#endif
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("d.marlin <dmarlin@redhat.com");
|
|
MODULE_DESCRIPTION("Board-specific glue layer for AG-AND flash on Renesas FROM_BOARD4");
|
|
|