mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
396744b76a
OMAP onenand nodes are missing compatible property, add it. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
489 lines
12 KiB
Plaintext
489 lines
12 KiB
Plaintext
/*
|
|
* omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
|
|
*
|
|
* Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "omap36xx.dtsi"
|
|
|
|
/ {
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vcc>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
300000 1012500
|
|
600000 1200000
|
|
800000 1325000
|
|
1000000 1375000
|
|
>;
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x40000000>; /* 1 GB */
|
|
};
|
|
|
|
vemmc: fixedregulator0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VEMMC";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
|
|
startup-delay-us = <150>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vwlan_fixed: fixedregulator2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VWLAN";
|
|
gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
|
|
enable-active-high;
|
|
regulator-boot-off;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
heartbeat {
|
|
label = "debug::sleep";
|
|
gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */
|
|
linux,default-trigger = "default-on";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&debug_leds>;
|
|
};
|
|
};
|
|
|
|
/* controlled (enabled/disabled) directly by wl1271 */
|
|
vctcxo: vctcxo {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <38400000>;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
accelerator_pins: pinmux_accelerator_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */
|
|
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
|
|
>;
|
|
};
|
|
|
|
debug_leds: pinmux_debug_led_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */
|
|
>;
|
|
};
|
|
|
|
mmc2_pins: pinmux_mmc2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
|
|
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
|
|
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
|
|
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
|
|
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
|
|
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
|
|
>;
|
|
};
|
|
|
|
wlan_pins: pinmux_wlan_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
|
|
OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
|
|
>;
|
|
};
|
|
|
|
ssi_pins: pinmux_ssi_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
|
|
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
|
|
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
|
|
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
|
|
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
|
|
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
|
|
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
|
|
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
|
|
>;
|
|
};
|
|
|
|
ssi_pins_idle: pinmux_ssi_pins_idle {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */
|
|
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */
|
|
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */
|
|
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
|
|
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */
|
|
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */
|
|
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */
|
|
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */
|
|
>;
|
|
};
|
|
|
|
modem_pins1: pinmux_modem_core1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
|
|
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */
|
|
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */
|
|
>;
|
|
};
|
|
|
|
uart2_pins: pinmux_uart2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
|
|
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
|
|
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
|
|
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&omap3_pmx_core2 {
|
|
modem_pins2: pinmux_modem_core2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <2900000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
interrupt-parent = <&intc>;
|
|
};
|
|
};
|
|
|
|
/include/ "twl4030.dtsi"
|
|
|
|
&twl {
|
|
compatible = "ti,twl5031";
|
|
|
|
twl_power: power {
|
|
compatible = "ti,twl4030-power";
|
|
ti,use_poweroff;
|
|
};
|
|
};
|
|
|
|
&twl_gpio {
|
|
ti,pullups = <0x000001>; /* BIT(0) */
|
|
ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
|
|
};
|
|
|
|
&vdac {
|
|
regulator-name = "vdac";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&vpll1 {
|
|
regulator-name = "vpll1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&vpll2 {
|
|
regulator-name = "vpll2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&vaux1 {
|
|
regulator-name = "vaux1";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
/* CSI-2 receiver */
|
|
&vaux2 {
|
|
regulator-name = "vaux2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
/* Cameras */
|
|
&vaux3 {
|
|
regulator-name = "vaux3";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
&vaux4 {
|
|
regulator-name = "vaux4";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
&vmmc1 {
|
|
regulator-name = "vmmc1";
|
|
regulator-min-microvolt = <1850000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
};
|
|
|
|
&vmmc2 {
|
|
regulator-name = "vmmc2";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
&vintana1 {
|
|
regulator-name = "vintana1";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
};
|
|
|
|
&vintana2 {
|
|
regulator-name = "vintana2";
|
|
regulator-min-microvolt = <2750000>;
|
|
regulator-max-microvolt = <2750000>;
|
|
};
|
|
|
|
&vintdig {
|
|
regulator-name = "vintdig";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
};
|
|
|
|
&vsim {
|
|
regulator-name = "vsim";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&vio {
|
|
regulator-name = "vio";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
|
|
as3645a@30 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x30>;
|
|
compatible = "ams,as3645a";
|
|
as3645a_flash: flash@0 {
|
|
reg = <0x0>;
|
|
flash-timeout-us = <150000>;
|
|
flash-max-microamp = <320000>;
|
|
led-max-microamp = <60000>;
|
|
ams,input-max-microamp = <1750000>;
|
|
};
|
|
as3645a_indicator: indicator@1 {
|
|
reg = <0x1>;
|
|
led-max-microamp = <10000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <400000>;
|
|
|
|
lis302: lis302@1d {
|
|
compatible = "st,lis3lv02d";
|
|
reg = <0x1d>;
|
|
|
|
Vdd-supply = <&vaux1>;
|
|
Vdd_IO-supply = <&vio>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&accelerator_pins>;
|
|
|
|
interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
|
|
|
|
/* click flags */
|
|
st,click-single-x;
|
|
st,click-single-y;
|
|
st,click-single-z;
|
|
|
|
/* Limits are 0.5g * value */
|
|
st,click-threshold-x = <8>;
|
|
st,click-threshold-y = <8>;
|
|
st,click-threshold-z = <10>;
|
|
|
|
/* Click must be longer than time limit */
|
|
st,click-time-limit = <9>;
|
|
|
|
/* Kind of debounce filter */
|
|
st,click-latency = <50>;
|
|
|
|
st,wakeup-x-hi;
|
|
st,wakeup-y-hi;
|
|
st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
|
|
|
|
st,wakeup2-z-hi;
|
|
st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
|
|
|
|
st,highpass-cutoff-hz = <2>;
|
|
|
|
/* Interrupt line 1 for thresholds */
|
|
st,irq1-ff-wu-1;
|
|
st,irq1-ff-wu-2;
|
|
/* Interrupt line 2 for click detection */
|
|
st,irq2-click;
|
|
|
|
st,wu-duration-1 = <8>;
|
|
st,wu-duration-2 = <8>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
vmmc-supply = <&vemmc>;
|
|
bus-width = <4>;
|
|
ti,non-removable;
|
|
};
|
|
|
|
&mmc3 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&usb_otg_hs {
|
|
interface-type = <0>;
|
|
usb-phy = <&usb2_phy>;
|
|
phys = <&usb2_phy>;
|
|
phy-names = "usb2-phy";
|
|
mode = <3>;
|
|
power = <50>;
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
|
|
|
|
onenand@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "ti,omap2-onenand";
|
|
reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
|
|
|
|
gpmc,sync-read;
|
|
gpmc,sync-write;
|
|
gpmc,burst-length = <16>;
|
|
gpmc,burst-read;
|
|
gpmc,burst-wrap;
|
|
gpmc,burst-write;
|
|
gpmc,device-width = <2>;
|
|
gpmc,mux-add-data = <2>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <87>;
|
|
gpmc,cs-wr-off-ns = <87>;
|
|
gpmc,adv-on-ns = <0>;
|
|
gpmc,adv-rd-off-ns = <10>;
|
|
gpmc,adv-wr-off-ns = <10>;
|
|
gpmc,oe-on-ns = <15>;
|
|
gpmc,oe-off-ns = <87>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <87>;
|
|
gpmc,rd-cycle-ns = <112>;
|
|
gpmc,wr-cycle-ns = <112>;
|
|
gpmc,access-ns = <81>;
|
|
gpmc,page-burst-access-ns = <15>;
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
gpmc,clk-activation-ns = <5>;
|
|
gpmc,wr-data-mux-bus-ns = <30>;
|
|
gpmc,wr-access-ns = <81>;
|
|
gpmc,sync-clk-ps = <15000>;
|
|
|
|
/*
|
|
* MTD partition table corresponding to Nokia's MeeGo 1.2
|
|
* Harmattan release.
|
|
*/
|
|
partition@0 {
|
|
label = "bootloader";
|
|
reg = <0x00000000 0x00100000>;
|
|
};
|
|
partition@1 {
|
|
label = "config";
|
|
reg = <0x00100000 0x002c0000>;
|
|
};
|
|
partition@2 {
|
|
label = "kernel";
|
|
reg = <0x003c0000 0x01000000>;
|
|
};
|
|
partition@3 {
|
|
label = "log";
|
|
reg = <0x013c0000 0x00200000>;
|
|
};
|
|
partition@4 {
|
|
label = "var";
|
|
reg = <0x015c0000 0x1ca40000>;
|
|
};
|
|
partition@5 {
|
|
label = "moslo";
|
|
reg = <0x1e000000 0x02000000>;
|
|
};
|
|
partition@6 {
|
|
label = "omap2-onenand";
|
|
reg = <0x00000000 0x20000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ssi_port1 {
|
|
pinctrl-names = "default", "idle";
|
|
pinctrl-0 = <&ssi_pins>;
|
|
pinctrl-1 = <&ssi_pins_idle>;
|
|
|
|
ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
|
|
|
|
modem: hsi-client {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&modem_pins1 &modem_pins2>;
|
|
|
|
hsi-channel-ids = <0>, <1>, <2>, <3>;
|
|
hsi-channel-names = "mcsaab-control",
|
|
"speech-control",
|
|
"speech-data",
|
|
"mcsaab-data";
|
|
hsi-speed-kbps = <96000>;
|
|
hsi-mode = "frame";
|
|
hsi-flow = "synchronized";
|
|
hsi-arb-mode = "round-robin";
|
|
|
|
interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
|
|
|
|
gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */
|
|
<&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */
|
|
<&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */
|
|
gpio-names = "cmt_apeslpx",
|
|
"cmt_rst_rq",
|
|
"cmt_en";
|
|
};
|
|
};
|
|
|
|
&ssi_port2 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
|
|
bluetooth {
|
|
compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
|
|
|
|
reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */
|
|
host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
|
|
bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
|
|
|
|
clocks = <&vctcxo>;
|
|
clock-names = "sysclk";
|
|
};
|
|
};
|