mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 03:35:36 +07:00
2359ccddc1
Bindings are supposed to be organized by device class/function. Move bindings for various timers to timer/ binding directory. Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
113 lines
3.7 KiB
Plaintext
113 lines
3.7 KiB
Plaintext
* ARM architected timer
|
|
|
|
ARM cores may have a per-core architected timer, which provides per-cpu timers,
|
|
or a memory mapped architected timer, which provides up to 8 frames with a
|
|
physical and optional virtual timer per frame.
|
|
|
|
The per-core architected timer is attached to a GIC to deliver its
|
|
per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
|
|
to deliver its interrupts via SPIs.
|
|
|
|
** CP15 Timer node properties:
|
|
|
|
- compatible : Should at least contain one of
|
|
"arm,armv7-timer"
|
|
"arm,armv8-timer"
|
|
|
|
- interrupts : Interrupt list for secure, non-secure, virtual and
|
|
hypervisor timers, in that order.
|
|
|
|
- clock-frequency : The frequency of the main counter, in Hz. Should be present
|
|
only where necessary to work around broken firmware which does not configure
|
|
CNTFRQ on all CPUs to a uniform correct value. Use of this property is
|
|
strongly discouraged; fix your firmware unless absolutely impossible.
|
|
|
|
- always-on : a boolean property. If present, the timer is powered through an
|
|
always-on power domain, therefore it never loses context.
|
|
|
|
- fsl,erratum-a008585 : A boolean property. Indicates the presence of
|
|
QorIQ erratum A-008585, which says that reading the counter is
|
|
unreliable unless the same value is returned by back-to-back reads.
|
|
This also affects writes to the tval register, due to the implicit
|
|
counter read.
|
|
|
|
- hisilicon,erratum-161010101 : A boolean property. Indicates the
|
|
presence of Hisilicon erratum 161010101, which says that reading the
|
|
counters is unreliable in some cases, and reads may return a value 32
|
|
beyond the correct value. This also affects writes to the tval
|
|
registers, due to the implicit counter read.
|
|
|
|
** Optional properties:
|
|
|
|
- arm,cpu-registers-not-fw-configured : Firmware does not initialize
|
|
any of the generic timer CPU registers, which contain their
|
|
architecturally-defined reset values. Only supported for 32-bit
|
|
systems which follow the ARMv7 architected reset values.
|
|
|
|
- arm,no-tick-in-suspend : The main counter does not tick when the system is in
|
|
low-power system suspend on some SoCs. This behavior does not match the
|
|
Architecture Reference Manual's specification that the system counter "must
|
|
be implemented in an always-on power domain."
|
|
|
|
|
|
Example:
|
|
|
|
timer {
|
|
compatible = "arm,cortex-a15-timer",
|
|
"arm,armv7-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
clock-frequency = <100000000>;
|
|
};
|
|
|
|
** Memory mapped timer node properties:
|
|
|
|
- compatible : Should at least contain "arm,armv7-timer-mem".
|
|
|
|
- clock-frequency : The frequency of the main counter, in Hz. Should be present
|
|
only when firmware has not configured the MMIO CNTFRQ registers.
|
|
|
|
- reg : The control frame base address.
|
|
|
|
Note that #address-cells, #size-cells, and ranges shall be present to ensure
|
|
the CPU can address a frame's registers.
|
|
|
|
A timer node has up to 8 frame sub-nodes, each with the following properties:
|
|
|
|
- frame-number: 0 to 7.
|
|
|
|
- interrupts : Interrupt list for physical and virtual timers in that order.
|
|
The virtual timer interrupt is optional.
|
|
|
|
- reg : The first and second view base addresses in that order. The second view
|
|
base address is optional.
|
|
|
|
- status : "disabled" indicates the frame is not available for use. Optional.
|
|
|
|
Example:
|
|
|
|
timer@f0000000 {
|
|
compatible = "arm,armv7-timer-mem";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
reg = <0xf0000000 0x1000>;
|
|
clock-frequency = <50000000>;
|
|
|
|
frame@f0001000 {
|
|
frame-number = <0>
|
|
interrupts = <0 13 0x8>,
|
|
<0 14 0x8>;
|
|
reg = <0xf0001000 0x1000>,
|
|
<0xf0002000 0x1000>;
|
|
};
|
|
|
|
frame@f0003000 {
|
|
frame-number = <1>
|
|
interrupts = <0 15 0x8>;
|
|
reg = <0xf0003000 0x1000>;
|
|
};
|
|
};
|