mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:05:21 +07:00
1f37cbe2a2
Add a DT property "active-semi,vsel-high" to indicate the VSEL pin is high. If this property is missing, then assume the VSEL pin is low(0). Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
96 lines
3.0 KiB
Plaintext
96 lines
3.0 KiB
Plaintext
ACT88xx regulators
|
|
-------------------
|
|
|
|
Required properties:
|
|
- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
|
|
- reg: I2C slave address
|
|
|
|
Optional properties:
|
|
- system-power-controller: Telling whether or not this pmic is controlling
|
|
the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
|
|
- active-semi,vsel-high: Indicates the VSEL pin is high.
|
|
If this property is missing, assume the VSEL pin is low(0).
|
|
|
|
Optional input supply properties:
|
|
- for act8600:
|
|
- vp1-supply: The input supply for DCDC_REG1
|
|
- vp2-supply: The input supply for DCDC_REG2
|
|
- vp3-supply: The input supply for DCDC_REG3
|
|
- inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8
|
|
SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
|
|
- for act8846:
|
|
- vp1-supply: The input supply for REG1
|
|
- vp2-supply: The input supply for REG2
|
|
- vp3-supply: The input supply for REG3
|
|
- vp4-supply: The input supply for REG4
|
|
- inl1-supply: The input supply for REG5, REG6 and REG7
|
|
- inl2-supply: The input supply for REG8 and LDO_REG9
|
|
- inl3-supply: The input supply for REG10, REG11 and REG12
|
|
- for act8865:
|
|
- vp1-supply: The input supply for DCDC_REG1
|
|
- vp2-supply: The input supply for DCDC_REG2
|
|
- vp3-supply: The input supply for DCDC_REG3
|
|
- inl45-supply: The input supply for LDO_REG1 and LDO_REG2
|
|
- inl67-supply: The input supply for LDO_REG3 and LDO_REG4
|
|
|
|
Any standard regulator properties can be used to configure the single regulator.
|
|
|
|
The valid names for regulators are:
|
|
- for act8846:
|
|
REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
|
|
- for act8865:
|
|
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
|
|
- for act8600:
|
|
DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
|
|
LDO_REG8, LDO_REG9, LDO_REG10,
|
|
|
|
Example:
|
|
--------
|
|
|
|
i2c1: i2c@f0018000 {
|
|
pmic: act8865@5b {
|
|
compatible = "active-semi,act8865";
|
|
reg = <0x5b>;
|
|
active-semi,vsel-high;
|
|
status = "disabled";
|
|
|
|
regulators {
|
|
vcc_1v8_reg: DCDC_REG1 {
|
|
regulator-name = "VCC_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_1v2_reg: DCDC_REG2 {
|
|
regulator-name = "VCC_1V2";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-suspend-mem-microvolt = <1150000>;
|
|
regulator-suspend-standby-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_3v3_reg: DCDC_REG3 {
|
|
regulator-name = "VCC_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddana_reg: LDO_REG1 {
|
|
regulator-name = "VDDANA";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddfuse_reg: LDO_REG2 {
|
|
regulator-name = "FUSE_2V5";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
};
|
|
};
|
|
};
|
|
};
|