linux_dsm_epyc7002/drivers/gpio/gpio-pmic-eic-sprd.c
Stephen Boyd 15bddb7d78 gpio: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: linux-gpio@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-16-swboyd@chromium.org
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 13:25:34 +02:00

382 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Spreadtrum Communications Inc.
* Copyright (C) 2018 Linaro Ltd.
*/
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
/* EIC registers definition */
#define SPRD_PMIC_EIC_DATA 0x0
#define SPRD_PMIC_EIC_DMSK 0x4
#define SPRD_PMIC_EIC_IEV 0x14
#define SPRD_PMIC_EIC_IE 0x18
#define SPRD_PMIC_EIC_RIS 0x1c
#define SPRD_PMIC_EIC_MIS 0x20
#define SPRD_PMIC_EIC_IC 0x24
#define SPRD_PMIC_EIC_TRIG 0x28
#define SPRD_PMIC_EIC_CTRL0 0x40
/*
* The PMIC EIC controller only has one bank, and each bank now can contain
* 16 EICs.
*/
#define SPRD_PMIC_EIC_PER_BANK_NR 16
#define SPRD_PMIC_EIC_NR SPRD_PMIC_EIC_PER_BANK_NR
#define SPRD_PMIC_EIC_DATA_MASK GENMASK(15, 0)
#define SPRD_PMIC_EIC_BIT(x) ((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1))
#define SPRD_PMIC_EIC_DBNC_MASK GENMASK(11, 0)
/*
* These registers are modified under the irq bus lock and cached to avoid
* unnecessary writes in bus_sync_unlock.
*/
enum {
REG_IEV,
REG_IE,
REG_TRIG,
CACHE_NR_REGS
};
/**
* struct sprd_pmic_eic - PMIC EIC controller
* @chip: the gpio_chip structure.
* @intc: the irq_chip structure.
* @regmap: the regmap from the parent device.
* @offset: the EIC controller's offset address of the PMIC.
* @reg: the array to cache the EIC registers.
* @buslock: for bus lock/sync and unlock.
* @irq: the interrupt number of the PMIC EIC conteroller.
*/
struct sprd_pmic_eic {
struct gpio_chip chip;
struct irq_chip intc;
struct regmap *map;
u32 offset;
u8 reg[CACHE_NR_REGS];
struct mutex buslock;
int irq;
};
static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset,
u16 reg, unsigned int val)
{
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
u32 shift = SPRD_PMIC_EIC_BIT(offset);
regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg,
BIT(shift), val << shift);
}
static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset,
u16 reg)
{
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
u32 value;
int ret;
ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
if (ret)
return ret;
return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset)));
}
static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset)
{
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1);
return 0;
}
static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset)
{
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0);
}
static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset)
{
return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA);
}
static int sprd_pmic_eic_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
/* EICs are always input, nothing need to do here. */
return 0;
}
static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
/* EICs are always input, nothing need to do here. */
}
static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip,
unsigned int offset,
unsigned int debounce)
{
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
u32 reg, value;
int ret;
reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4;
ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
if (ret)
return ret;
value &= ~SPRD_PMIC_EIC_DBNC_MASK;
value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK;
return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value);
}
static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset,
unsigned long config)
{
unsigned long param = pinconf_to_config_param(config);
u32 arg = pinconf_to_config_argument(config);
if (param == PIN_CONFIG_INPUT_DEBOUNCE)
return sprd_pmic_eic_set_debounce(chip, offset, arg);
return -ENOTSUPP;
}
static void sprd_pmic_eic_irq_mask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
pmic_eic->reg[REG_IE] = 0;
pmic_eic->reg[REG_TRIG] = 0;
}
static void sprd_pmic_eic_irq_unmask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
pmic_eic->reg[REG_IE] = 1;
pmic_eic->reg[REG_TRIG] = 1;
}
static int sprd_pmic_eic_irq_set_type(struct irq_data *data,
unsigned int flow_type)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
switch (flow_type) {
case IRQ_TYPE_LEVEL_HIGH:
pmic_eic->reg[REG_IEV] = 1;
break;
case IRQ_TYPE_LEVEL_LOW:
pmic_eic->reg[REG_IEV] = 0;
break;
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_EDGE_BOTH:
/*
* Will set the trigger level according to current EIC level
* in irq_bus_sync_unlock() interface, so here nothing to do.
*/
break;
default:
return -ENOTSUPP;
}
return 0;
}
static void sprd_pmic_eic_bus_lock(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
mutex_lock(&pmic_eic->buslock);
}
static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
u32 trigger = irqd_get_trigger_type(data);
u32 offset = irqd_to_hwirq(data);
int state;
/* Set irq type */
if (trigger & IRQ_TYPE_EDGE_BOTH) {
state = sprd_pmic_eic_get(chip, offset);
if (state)
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
else
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
} else {
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV,
pmic_eic->reg[REG_IEV]);
}
/* Set irq unmask */
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE,
pmic_eic->reg[REG_IE]);
/* Generate trigger start pulse for debounce EIC */
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG,
pmic_eic->reg[REG_TRIG]);
mutex_unlock(&pmic_eic->buslock);
}
static void sprd_pmic_eic_toggle_trigger(struct gpio_chip *chip,
unsigned int irq, unsigned int offset)
{
u32 trigger = irq_get_trigger_type(irq);
int state, post_state;
if (!(trigger & IRQ_TYPE_EDGE_BOTH))
return;
state = sprd_pmic_eic_get(chip, offset);
retry:
if (state)
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
else
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
post_state = sprd_pmic_eic_get(chip, offset);
if (state != post_state) {
dev_warn(chip->parent, "PMIC EIC level was changed.\n");
state = post_state;
goto retry;
}
/* Set irq unmask */
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, 1);
/* Generate trigger start pulse for debounce EIC */
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, 1);
}
static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data)
{
struct sprd_pmic_eic *pmic_eic = data;
struct gpio_chip *chip = &pmic_eic->chip;
unsigned long status;
u32 n, girq, val;
int ret;
ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS,
&val);
if (ret)
return IRQ_RETVAL(ret);
status = val & SPRD_PMIC_EIC_DATA_MASK;
for_each_set_bit(n, &status, chip->ngpio) {
/* Clear the interrupt */
sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1);
girq = irq_find_mapping(chip->irq.domain, n);
handle_nested_irq(girq);
/*
* The PMIC EIC can only support level trigger, so we can
* toggle the level trigger to emulate the edge trigger.
*/
sprd_pmic_eic_toggle_trigger(chip, girq, n);
}
return IRQ_HANDLED;
}
static int sprd_pmic_eic_probe(struct platform_device *pdev)
{
struct gpio_irq_chip *irq;
struct sprd_pmic_eic *pmic_eic;
int ret;
pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL);
if (!pmic_eic)
return -ENOMEM;
mutex_init(&pmic_eic->buslock);
pmic_eic->irq = platform_get_irq(pdev, 0);
if (pmic_eic->irq < 0)
return pmic_eic->irq;
pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL);
if (!pmic_eic->map)
return -ENODEV;
ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset);
if (ret) {
dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n");
return ret;
}
ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL,
sprd_pmic_eic_irq_handler,
IRQF_ONESHOT | IRQF_NO_SUSPEND,
dev_name(&pdev->dev), pmic_eic);
if (ret) {
dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n");
return ret;
}
pmic_eic->chip.label = dev_name(&pdev->dev);
pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR;
pmic_eic->chip.base = -1;
pmic_eic->chip.parent = &pdev->dev;
pmic_eic->chip.of_node = pdev->dev.of_node;
pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input;
pmic_eic->chip.request = sprd_pmic_eic_request;
pmic_eic->chip.free = sprd_pmic_eic_free;
pmic_eic->chip.set_config = sprd_pmic_eic_set_config;
pmic_eic->chip.set = sprd_pmic_eic_set;
pmic_eic->chip.get = sprd_pmic_eic_get;
pmic_eic->intc.name = dev_name(&pdev->dev);
pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask;
pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask;
pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type;
pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock;
pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock;
pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
irq = &pmic_eic->chip.irq;
irq->chip = &pmic_eic->intc;
irq->threaded = true;
ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic);
if (ret < 0) {
dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
return ret;
}
platform_set_drvdata(pdev, pmic_eic);
return 0;
}
static const struct of_device_id sprd_pmic_eic_of_match[] = {
{ .compatible = "sprd,sc2731-eic", },
{ /* end of list */ }
};
MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match);
static struct platform_driver sprd_pmic_eic_driver = {
.probe = sprd_pmic_eic_probe,
.driver = {
.name = "sprd-pmic-eic",
.of_match_table = sprd_pmic_eic_of_match,
},
};
module_platform_driver(sprd_pmic_eic_driver);
MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver");
MODULE_LICENSE("GPL v2");