mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-12 04:46:58 +07:00
43a255dba1
Make it harder to do mistakes by introducing the actual defined ABx500 IRQ number into the IRQ cluster definitions. Deduct cluster offset from the GPIO offset to make each cluster coherent. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1013 lines
26 KiB
C
1013 lines
26 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2013
|
|
*
|
|
* Author: Patrice Chotard <patrice.chotard@st.com>
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mfd/abx500.h>
|
|
#include <linux/mfd/abx500/ab8500.h>
|
|
#include <linux/mfd/abx500/ab8500-gpio.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
#include "pinctrl-abx500.h"
|
|
|
|
/*
|
|
* The AB9540 and AB8540 GPIO support are extended versions
|
|
* of the AB8500 GPIO support.
|
|
* The AB9540 supports an additional (7th) register so that
|
|
* more GPIO may be configured and used.
|
|
* The AB8540 supports 4 new gpios (GPIOx_VBAT) that have
|
|
* internal pull-up and pull-down capabilities.
|
|
*/
|
|
|
|
/*
|
|
* GPIO registers offset
|
|
* Bank: 0x10
|
|
*/
|
|
#define AB8500_GPIO_SEL1_REG 0x00
|
|
#define AB8500_GPIO_SEL2_REG 0x01
|
|
#define AB8500_GPIO_SEL3_REG 0x02
|
|
#define AB8500_GPIO_SEL4_REG 0x03
|
|
#define AB8500_GPIO_SEL5_REG 0x04
|
|
#define AB8500_GPIO_SEL6_REG 0x05
|
|
#define AB9540_GPIO_SEL7_REG 0x06
|
|
|
|
#define AB8500_GPIO_DIR1_REG 0x10
|
|
#define AB8500_GPIO_DIR2_REG 0x11
|
|
#define AB8500_GPIO_DIR3_REG 0x12
|
|
#define AB8500_GPIO_DIR4_REG 0x13
|
|
#define AB8500_GPIO_DIR5_REG 0x14
|
|
#define AB8500_GPIO_DIR6_REG 0x15
|
|
#define AB9540_GPIO_DIR7_REG 0x16
|
|
|
|
#define AB8500_GPIO_OUT1_REG 0x20
|
|
#define AB8500_GPIO_OUT2_REG 0x21
|
|
#define AB8500_GPIO_OUT3_REG 0x22
|
|
#define AB8500_GPIO_OUT4_REG 0x23
|
|
#define AB8500_GPIO_OUT5_REG 0x24
|
|
#define AB8500_GPIO_OUT6_REG 0x25
|
|
#define AB9540_GPIO_OUT7_REG 0x26
|
|
|
|
#define AB8500_GPIO_PUD1_REG 0x30
|
|
#define AB8500_GPIO_PUD2_REG 0x31
|
|
#define AB8500_GPIO_PUD3_REG 0x32
|
|
#define AB8500_GPIO_PUD4_REG 0x33
|
|
#define AB8500_GPIO_PUD5_REG 0x34
|
|
#define AB8500_GPIO_PUD6_REG 0x35
|
|
#define AB9540_GPIO_PUD7_REG 0x36
|
|
|
|
#define AB8500_GPIO_IN1_REG 0x40
|
|
#define AB8500_GPIO_IN2_REG 0x41
|
|
#define AB8500_GPIO_IN3_REG 0x42
|
|
#define AB8500_GPIO_IN4_REG 0x43
|
|
#define AB8500_GPIO_IN5_REG 0x44
|
|
#define AB8500_GPIO_IN6_REG 0x45
|
|
#define AB9540_GPIO_IN7_REG 0x46
|
|
#define AB8540_GPIO_VINSEL_REG 0x47
|
|
#define AB8540_GPIO_PULL_UPDOWN_REG 0x48
|
|
#define AB8500_GPIO_ALTFUN_REG 0x50
|
|
#define AB8540_GPIO_PULL_UPDOWN_MASK 0x03
|
|
#define AB8540_GPIO_VINSEL_MASK 0x03
|
|
#define AB8540_GPIOX_VBAT_START 51
|
|
#define AB8540_GPIOX_VBAT_END 54
|
|
|
|
struct abx500_pinctrl {
|
|
struct device *dev;
|
|
struct pinctrl_dev *pctldev;
|
|
struct abx500_pinctrl_soc_data *soc;
|
|
struct gpio_chip chip;
|
|
struct ab8500 *parent;
|
|
struct mutex lock;
|
|
struct abx500_gpio_irq_cluster *irq_cluster;
|
|
int irq_cluster_size;
|
|
};
|
|
|
|
/**
|
|
* to_abx500_pinctrl() - get the pointer to abx500_pinctrl
|
|
* @chip: Member of the structure abx500_pinctrl
|
|
*/
|
|
static inline struct abx500_pinctrl *to_abx500_pinctrl(struct gpio_chip *chip)
|
|
{
|
|
return container_of(chip, struct abx500_pinctrl, chip);
|
|
}
|
|
|
|
static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg,
|
|
unsigned offset, bool *bit)
|
|
{
|
|
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
|
|
u8 pos = offset % 8;
|
|
u8 val;
|
|
int ret;
|
|
|
|
reg += offset / 8;
|
|
ret = abx500_get_register_interruptible(pct->dev,
|
|
AB8500_MISC, reg, &val);
|
|
|
|
*bit = !!(val & BIT(pos));
|
|
|
|
if (ret < 0)
|
|
dev_err(pct->dev,
|
|
"%s read reg =%x, offset=%x failed\n",
|
|
__func__, reg, offset);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
|
|
unsigned offset, int val)
|
|
{
|
|
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
|
|
u8 pos = offset % 8;
|
|
int ret;
|
|
|
|
reg += offset / 8;
|
|
ret = abx500_mask_and_set_register_interruptible(pct->dev,
|
|
AB8500_MISC, reg, BIT(pos), val << pos);
|
|
if (ret < 0)
|
|
dev_err(pct->dev, "%s write failed\n", __func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* abx500_gpio_get() - Get the particular GPIO value
|
|
* @chip: Gpio device
|
|
* @offset: GPIO number to read
|
|
*/
|
|
static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
|
|
bool bit;
|
|
int ret;
|
|
|
|
ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG,
|
|
offset, &bit);
|
|
if (ret < 0) {
|
|
dev_err(pct->dev, "%s failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return bit;
|
|
}
|
|
|
|
static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
|
|
{
|
|
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
|
|
int ret;
|
|
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
|
|
if (ret < 0)
|
|
dev_err(pct->dev, "%s write failed\n", __func__);
|
|
}
|
|
|
|
static int abx500_config_pull_updown(struct abx500_pinctrl *pct,
|
|
int offset, enum abx500_gpio_pull_updown val)
|
|
{
|
|
u8 pos;
|
|
int ret;
|
|
struct pullud *pullud;
|
|
|
|
if (!pct->soc->pullud) {
|
|
dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature",
|
|
__func__);
|
|
ret = -EPERM;
|
|
goto out;
|
|
}
|
|
|
|
pullud = pct->soc->pullud;
|
|
|
|
if ((offset < pullud->first_pin)
|
|
|| (offset > pullud->last_pin)) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
pos = offset << 1;
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(pct->dev,
|
|
AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG,
|
|
AB8540_GPIO_PULL_UPDOWN_MASK << pos, val << pos);
|
|
|
|
out:
|
|
if (ret < 0)
|
|
dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int abx500_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset,
|
|
int val)
|
|
{
|
|
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
|
|
struct pullud *pullud = pct->soc->pullud;
|
|
unsigned gpio;
|
|
int ret;
|
|
|
|
/* set direction as output */
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* disable pull down */
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* if supported, disable both pull down and pull up */
|
|
gpio = offset + 1;
|
|
if (pullud && gpio >= pullud->first_pin && gpio <= pullud->last_pin) {
|
|
ret = abx500_config_pull_updown(pct,
|
|
gpio,
|
|
ABX500_GPIO_PULL_NONE);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* set the output as 1 or 0 */
|
|
return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
|
|
}
|
|
|
|
static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
/* set the register as input */
|
|
return abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0);
|
|
}
|
|
|
|
static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
|
|
/* The AB8500 GPIO numbers are off by one */
|
|
int gpio = offset + 1;
|
|
int hwirq;
|
|
int i;
|
|
|
|
for (i = 0; i < pct->irq_cluster_size; i++) {
|
|
struct abx500_gpio_irq_cluster *cluster =
|
|
&pct->irq_cluster[i];
|
|
|
|
if (gpio >= cluster->start && gpio <= cluster->end) {
|
|
/*
|
|
* The ABx500 GPIO's associated IRQs are clustered together
|
|
* throughout the interrupt numbers at irregular intervals.
|
|
* To solve this quandry, we have placed the read-in values
|
|
* into the cluster information table.
|
|
*/
|
|
hwirq = gpio - cluster->start + cluster->to_irq;
|
|
return irq_create_mapping(pct->parent->domain, hwirq);
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
|
|
unsigned gpio, int alt_setting)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
struct alternate_functions af = pct->soc->alternate_functions[gpio];
|
|
int ret;
|
|
int val;
|
|
unsigned offset;
|
|
|
|
const char *modes[] = {
|
|
[ABX500_DEFAULT] = "default",
|
|
[ABX500_ALT_A] = "altA",
|
|
[ABX500_ALT_B] = "altB",
|
|
[ABX500_ALT_C] = "altC",
|
|
};
|
|
|
|
/* sanity check */
|
|
if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) ||
|
|
((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) ||
|
|
((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) {
|
|
dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio,
|
|
modes[alt_setting]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* on ABx5xx, there is no GPIO0, so adjust the offset */
|
|
offset = gpio - 1;
|
|
|
|
switch (alt_setting) {
|
|
case ABX500_DEFAULT:
|
|
/*
|
|
* for ABx5xx family, default mode is always selected by
|
|
* writing 0 to GPIOSELx register, except for pins which
|
|
* support at least ALT_B mode, default mode is selected
|
|
* by writing 1 to GPIOSELx register
|
|
*/
|
|
val = 0;
|
|
if (af.alt_bit1 != UNUSED)
|
|
val++;
|
|
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
|
|
offset, val);
|
|
break;
|
|
|
|
case ABX500_ALT_A:
|
|
/*
|
|
* for ABx5xx family, alt_a mode is always selected by
|
|
* writing 1 to GPIOSELx register, except for pins which
|
|
* support at least ALT_B mode, alt_a mode is selected
|
|
* by writing 0 to GPIOSELx register and 0 in ALTFUNC
|
|
* register
|
|
*/
|
|
if (af.alt_bit1 != UNUSED) {
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
|
|
offset, 0);
|
|
ret = abx500_gpio_set_bits(chip,
|
|
AB8500_GPIO_ALTFUN_REG,
|
|
af.alt_bit1,
|
|
!!(af.alta_val && BIT(0)));
|
|
if (af.alt_bit2 != UNUSED)
|
|
ret = abx500_gpio_set_bits(chip,
|
|
AB8500_GPIO_ALTFUN_REG,
|
|
af.alt_bit2,
|
|
!!(af.alta_val && BIT(1)));
|
|
} else
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
|
|
offset, 1);
|
|
break;
|
|
|
|
case ABX500_ALT_B:
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
|
|
offset, 0);
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
|
|
af.alt_bit1, !!(af.altb_val && BIT(0)));
|
|
if (af.alt_bit2 != UNUSED)
|
|
ret = abx500_gpio_set_bits(chip,
|
|
AB8500_GPIO_ALTFUN_REG,
|
|
af.alt_bit2,
|
|
!!(af.altb_val && BIT(1)));
|
|
break;
|
|
|
|
case ABX500_ALT_C:
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
|
|
offset, 0);
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
|
|
af.alt_bit2, !!(af.altc_val && BIT(0)));
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
|
|
af.alt_bit2, !!(af.altc_val && BIT(1)));
|
|
break;
|
|
|
|
default:
|
|
dev_dbg(pct->dev, "unknow alt_setting %d\n", alt_setting);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
|
|
unsigned gpio)
|
|
{
|
|
u8 mode;
|
|
bool bit_mode;
|
|
bool alt_bit1;
|
|
bool alt_bit2;
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
struct alternate_functions af = pct->soc->alternate_functions[gpio];
|
|
/* on ABx5xx, there is no GPIO0, so adjust the offset */
|
|
unsigned offset = gpio - 1;
|
|
|
|
/*
|
|
* if gpiosel_bit is set to unused,
|
|
* it means no GPIO or special case
|
|
*/
|
|
if (af.gpiosel_bit == UNUSED)
|
|
return ABX500_DEFAULT;
|
|
|
|
/* read GpioSelx register */
|
|
abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8),
|
|
af.gpiosel_bit, &bit_mode);
|
|
mode = bit_mode;
|
|
|
|
/* sanity check */
|
|
if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) ||
|
|
(af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) {
|
|
dev_err(pct->dev,
|
|
"alt_bitX value not in correct range (-1 to 7)\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* if alt_bit2 is used, alt_bit1 must be used too */
|
|
if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) {
|
|
dev_err(pct->dev,
|
|
"if alt_bit2 is used, alt_bit1 can't be unused\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* check if pin use AlternateFunction register */
|
|
if ((af.alt_bit1 == UNUSED) && (af.alt_bit1 == UNUSED))
|
|
return mode;
|
|
/*
|
|
* if pin GPIOSEL bit is set and pin supports alternate function,
|
|
* it means DEFAULT mode
|
|
*/
|
|
if (mode)
|
|
return ABX500_DEFAULT;
|
|
|
|
/*
|
|
* pin use the AlternatFunction register
|
|
* read alt_bit1 value
|
|
*/
|
|
abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
|
|
af.alt_bit1, &alt_bit1);
|
|
|
|
if (af.alt_bit2 != UNUSED)
|
|
/* read alt_bit2 value */
|
|
abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2,
|
|
&alt_bit2);
|
|
else
|
|
alt_bit2 = 0;
|
|
|
|
mode = (alt_bit2 << 1) + alt_bit1;
|
|
if (mode == af.alta_val)
|
|
return ABX500_ALT_A;
|
|
else if (mode == af.altb_val)
|
|
return ABX500_ALT_B;
|
|
else
|
|
return ABX500_ALT_C;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
static void abx500_gpio_dbg_show_one(struct seq_file *s,
|
|
struct pinctrl_dev *pctldev,
|
|
struct gpio_chip *chip,
|
|
unsigned offset, unsigned gpio)
|
|
{
|
|
const char *label = gpiochip_is_requested(chip, offset - 1);
|
|
u8 gpio_offset = offset - 1;
|
|
int mode = -1;
|
|
bool is_out;
|
|
bool pull;
|
|
|
|
const char *modes[] = {
|
|
[ABX500_DEFAULT] = "default",
|
|
[ABX500_ALT_A] = "altA",
|
|
[ABX500_ALT_B] = "altB",
|
|
[ABX500_ALT_C] = "altC",
|
|
};
|
|
|
|
abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, gpio_offset, &is_out);
|
|
abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG, gpio_offset, &pull);
|
|
|
|
if (pctldev)
|
|
mode = abx500_get_mode(pctldev, chip, offset);
|
|
|
|
seq_printf(s, " gpio-%-3d (%-20.20s) %-3s %-9s %s",
|
|
gpio, label ?: "(none)",
|
|
is_out ? "out" : "in ",
|
|
is_out ?
|
|
(chip->get
|
|
? (chip->get(chip, offset) ? "hi" : "lo")
|
|
: "? ")
|
|
: (pull ? "pull up" : "pull down"),
|
|
(mode < 0) ? "unknown" : modes[mode]);
|
|
}
|
|
|
|
static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
unsigned i;
|
|
unsigned gpio = chip->base;
|
|
struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
|
|
struct pinctrl_dev *pctldev = pct->pctldev;
|
|
|
|
for (i = 0; i < chip->ngpio; i++, gpio++) {
|
|
/* On AB8500, there is no GPIO0, the first is the GPIO 1 */
|
|
abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio);
|
|
seq_printf(s, "\n");
|
|
}
|
|
}
|
|
|
|
#else
|
|
static inline void abx500_gpio_dbg_show_one(struct seq_file *s,
|
|
struct pinctrl_dev *pctldev,
|
|
struct gpio_chip *chip,
|
|
unsigned offset, unsigned gpio)
|
|
{
|
|
}
|
|
#define abx500_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
int abx500_gpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
int gpio = chip->base + offset;
|
|
|
|
return pinctrl_request_gpio(gpio);
|
|
}
|
|
|
|
void abx500_gpio_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
int gpio = chip->base + offset;
|
|
|
|
pinctrl_free_gpio(gpio);
|
|
}
|
|
|
|
static struct gpio_chip abx500gpio_chip = {
|
|
.label = "abx500-gpio",
|
|
.owner = THIS_MODULE,
|
|
.request = abx500_gpio_request,
|
|
.free = abx500_gpio_free,
|
|
.direction_input = abx500_gpio_direction_input,
|
|
.get = abx500_gpio_get,
|
|
.direction_output = abx500_gpio_direction_output,
|
|
.set = abx500_gpio_set,
|
|
.to_irq = abx500_gpio_to_irq,
|
|
.dbg_show = abx500_gpio_dbg_show,
|
|
};
|
|
|
|
static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pct->soc->nfunctions;
|
|
}
|
|
|
|
static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev,
|
|
unsigned function)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pct->soc->functions[function].name;
|
|
}
|
|
|
|
static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev,
|
|
unsigned function,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = pct->soc->functions[function].groups;
|
|
*num_groups = pct->soc->functions[function].ngroups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
|
|
unsigned group)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
struct gpio_chip *chip = &pct->chip;
|
|
const struct abx500_pingroup *g;
|
|
int i;
|
|
int ret = 0;
|
|
|
|
g = &pct->soc->groups[group];
|
|
if (g->altsetting < 0)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins);
|
|
|
|
for (i = 0; i < g->npins; i++) {
|
|
dev_dbg(pct->dev, "setting pin %d to altsetting %d\n",
|
|
g->pins[i], g->altsetting);
|
|
|
|
ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void abx500_pmx_disable(struct pinctrl_dev *pctldev,
|
|
unsigned function, unsigned group)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct abx500_pingroup *g;
|
|
|
|
g = &pct->soc->groups[group];
|
|
if (g->altsetting < 0)
|
|
return;
|
|
|
|
/* FIXME: poke out the mux, set the pin to some default state? */
|
|
dev_dbg(pct->dev, "disable group %s, %u pins\n", g->name, g->npins);
|
|
}
|
|
|
|
int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct abx500_pinrange *p;
|
|
int ret;
|
|
int i;
|
|
|
|
/*
|
|
* Different ranges have different ways to enable GPIO function on a
|
|
* pin, so refer back to our local range type, where we handily define
|
|
* what altfunc enables GPIO for a certain pin.
|
|
*/
|
|
for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
|
|
p = &pct->soc->gpio_ranges[i];
|
|
if ((offset >= p->offset) &&
|
|
(offset < (p->offset + p->npins)))
|
|
break;
|
|
}
|
|
|
|
if (i == pct->soc->gpio_num_ranges) {
|
|
dev_err(pct->dev, "%s failed to locate range\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n",
|
|
p->altfunc, offset);
|
|
|
|
ret = abx500_set_mode(pct->pctldev, &pct->chip,
|
|
offset, p->altfunc);
|
|
if (ret < 0) {
|
|
dev_err(pct->dev, "%s setting altfunc failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
}
|
|
|
|
static struct pinmux_ops abx500_pinmux_ops = {
|
|
.get_functions_count = abx500_pmx_get_funcs_cnt,
|
|
.get_function_name = abx500_pmx_get_func_name,
|
|
.get_function_groups = abx500_pmx_get_func_groups,
|
|
.enable = abx500_pmx_enable,
|
|
.disable = abx500_pmx_disable,
|
|
.gpio_request_enable = abx500_gpio_request_enable,
|
|
.gpio_disable_free = abx500_gpio_disable_free,
|
|
};
|
|
|
|
static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pct->soc->ngroups;
|
|
}
|
|
|
|
static const char *abx500_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pct->soc->groups[selector].name;
|
|
}
|
|
|
|
static int abx500_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned selector,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = pct->soc->groups[selector].pins;
|
|
*num_pins = pct->soc->groups[selector].npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev,
|
|
struct seq_file *s, unsigned offset)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
struct gpio_chip *chip = &pct->chip;
|
|
|
|
abx500_gpio_dbg_show_one(s, pctldev, chip, offset,
|
|
chip->base + offset - 1);
|
|
}
|
|
|
|
static struct pinctrl_ops abx500_pinctrl_ops = {
|
|
.get_groups_count = abx500_get_groups_cnt,
|
|
.get_group_name = abx500_get_group_name,
|
|
.get_group_pins = abx500_get_group_pins,
|
|
.pin_dbg_show = abx500_pin_dbg_show,
|
|
};
|
|
|
|
int abx500_pin_config_get(struct pinctrl_dev *pctldev,
|
|
unsigned pin,
|
|
unsigned long *config)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
int abx500_pin_config_set(struct pinctrl_dev *pctldev,
|
|
unsigned pin,
|
|
unsigned long config)
|
|
{
|
|
struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
|
|
struct pullud *pullud = pct->soc->pullud;
|
|
struct gpio_chip *chip = &pct->chip;
|
|
unsigned offset;
|
|
int ret;
|
|
enum pin_config_param param = pinconf_to_config_param(config);
|
|
enum pin_config_param argument = pinconf_to_config_argument(config);
|
|
|
|
dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n",
|
|
pin, config, (param == PIN_CONFIG_OUTPUT) ? "output " : "input",
|
|
(param == PIN_CONFIG_OUTPUT) ? (argument ? "high" : "low") :
|
|
(argument ? "pull up" : "pull down"));
|
|
|
|
/* on ABx500, there is no GPIO0, so adjust the offset */
|
|
offset = pin - 1;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
/*
|
|
* if argument = 1 set the pull down
|
|
* else clear the pull down
|
|
*/
|
|
ret = abx500_gpio_direction_input(chip, offset);
|
|
/*
|
|
* Some chips only support pull down, while some actually
|
|
* support both pull up and pull down. Such chips have
|
|
* a "pullud" range specified for the pins that support
|
|
* both features. If the pin is not within that range, we
|
|
* fall back to the old bit set that only support pull down.
|
|
*/
|
|
if (pullud &&
|
|
pin >= pullud->first_pin &&
|
|
pin <= pullud->last_pin)
|
|
ret = abx500_config_pull_updown(pct,
|
|
pin,
|
|
argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE);
|
|
else
|
|
/* Chip only supports pull down */
|
|
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG,
|
|
offset, argument ? 0 : 1);
|
|
break;
|
|
|
|
case PIN_CONFIG_OUTPUT:
|
|
ret = abx500_gpio_direction_output(chip, offset, argument);
|
|
|
|
break;
|
|
|
|
default:
|
|
dev_err(chip->dev, "illegal configuration requested\n");
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct pinconf_ops abx500_pinconf_ops = {
|
|
.pin_config_get = abx500_pin_config_get,
|
|
.pin_config_set = abx500_pin_config_set,
|
|
};
|
|
|
|
static struct pinctrl_desc abx500_pinctrl_desc = {
|
|
.name = "pinctrl-abx500",
|
|
.pctlops = &abx500_pinctrl_ops,
|
|
.pmxops = &abx500_pinmux_ops,
|
|
.confops = &abx500_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc)
|
|
{
|
|
unsigned int lowest = 0;
|
|
unsigned int highest = 0;
|
|
unsigned int npins = 0;
|
|
int i;
|
|
|
|
/*
|
|
* Compute number of GPIOs from the last SoC gpio range descriptors
|
|
* These ranges may include "holes" but the GPIO number space shall
|
|
* still be homogeneous, so we need to detect and account for any
|
|
* such holes so that these are included in the number of GPIO pins.
|
|
*/
|
|
for (i = 0; i < soc->gpio_num_ranges; i++) {
|
|
unsigned gstart;
|
|
unsigned gend;
|
|
const struct abx500_pinrange *p;
|
|
|
|
p = &soc->gpio_ranges[i];
|
|
gstart = p->offset;
|
|
gend = p->offset + p->npins - 1;
|
|
|
|
if (i == 0) {
|
|
/* First iteration, set start values */
|
|
lowest = gstart;
|
|
highest = gend;
|
|
} else {
|
|
if (gstart < lowest)
|
|
lowest = gstart;
|
|
if (gend > highest)
|
|
highest = gend;
|
|
}
|
|
}
|
|
/* this gives the absolute number of pins */
|
|
npins = highest - lowest + 1;
|
|
return npins;
|
|
}
|
|
|
|
static const struct of_device_id abx500_gpio_match[] = {
|
|
{ .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, },
|
|
{ .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, },
|
|
{ .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, },
|
|
{ .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, },
|
|
};
|
|
|
|
static int abx500_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct ab8500_platform_data *abx500_pdata =
|
|
dev_get_platdata(pdev->dev.parent);
|
|
struct abx500_gpio_platform_data *pdata = NULL;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct abx500_pinctrl *pct;
|
|
const struct platform_device_id *platid = platform_get_device_id(pdev);
|
|
unsigned int id = -1;
|
|
int ret, err;
|
|
int i;
|
|
|
|
if (abx500_pdata)
|
|
pdata = abx500_pdata->gpio;
|
|
if (!pdata) {
|
|
if (np) {
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_device(abx500_gpio_match, &pdev->dev);
|
|
if (!match)
|
|
return -ENODEV;
|
|
id = (unsigned long)match->data;
|
|
} else {
|
|
dev_err(&pdev->dev, "gpio dt and platform data missing\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
if (platid)
|
|
id = platid->driver_data;
|
|
|
|
pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl),
|
|
GFP_KERNEL);
|
|
if (pct == NULL) {
|
|
dev_err(&pdev->dev,
|
|
"failed to allocate memory for pct\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pct->dev = &pdev->dev;
|
|
pct->parent = dev_get_drvdata(pdev->dev.parent);
|
|
pct->chip = abx500gpio_chip;
|
|
pct->chip.dev = &pdev->dev;
|
|
pct->chip.base = pdata->gpio_base;
|
|
pct->chip.base = (np) ? -1 : pdata->gpio_base;
|
|
|
|
/* initialize the lock */
|
|
mutex_init(&pct->lock);
|
|
|
|
/* Poke in other ASIC variants here */
|
|
switch (id) {
|
|
case PINCTRL_AB8500:
|
|
abx500_pinctrl_ab8500_init(&pct->soc);
|
|
break;
|
|
case PINCTRL_AB8540:
|
|
abx500_pinctrl_ab8540_init(&pct->soc);
|
|
break;
|
|
case PINCTRL_AB9540:
|
|
abx500_pinctrl_ab9540_init(&pct->soc);
|
|
break;
|
|
case PINCTRL_AB8505:
|
|
abx500_pinctrl_ab8505_init(&pct->soc);
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
|
|
(int) platid->driver_data);
|
|
mutex_destroy(&pct->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!pct->soc) {
|
|
dev_err(&pdev->dev, "Invalid SOC data\n");
|
|
mutex_destroy(&pct->lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pct->chip.ngpio = abx500_get_gpio_num(pct->soc);
|
|
pct->irq_cluster = pct->soc->gpio_irq_cluster;
|
|
pct->irq_cluster_size = pct->soc->ngpio_irq_cluster;
|
|
|
|
ret = gpiochip_add(&pct->chip);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
|
|
mutex_destroy(&pct->lock);
|
|
return ret;
|
|
}
|
|
dev_info(&pdev->dev, "added gpiochip\n");
|
|
|
|
abx500_pinctrl_desc.pins = pct->soc->pins;
|
|
abx500_pinctrl_desc.npins = pct->soc->npins;
|
|
pct->pctldev = pinctrl_register(&abx500_pinctrl_desc, &pdev->dev, pct);
|
|
if (!pct->pctldev) {
|
|
dev_err(&pdev->dev,
|
|
"could not register abx500 pinctrl driver\n");
|
|
ret = -EINVAL;
|
|
goto out_rem_chip;
|
|
}
|
|
dev_info(&pdev->dev, "registered pin controller\n");
|
|
|
|
/* We will handle a range of GPIO pins */
|
|
for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
|
|
const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i];
|
|
|
|
ret = gpiochip_add_pin_range(&pct->chip,
|
|
dev_name(&pdev->dev),
|
|
p->offset - 1, p->offset, p->npins);
|
|
if (ret < 0)
|
|
goto out_rem_chip;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pct);
|
|
dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n");
|
|
|
|
return 0;
|
|
|
|
out_rem_chip:
|
|
err = gpiochip_remove(&pct->chip);
|
|
if (err)
|
|
dev_info(&pdev->dev, "failed to remove gpiochip\n");
|
|
|
|
mutex_destroy(&pct->lock);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* abx500_gpio_remove() - remove Ab8500-gpio driver
|
|
* @pdev: Platform device registered
|
|
*/
|
|
static int abx500_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct abx500_pinctrl *pct = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = gpiochip_remove(&pct->chip);
|
|
if (ret < 0) {
|
|
dev_err(pct->dev, "unable to remove gpiochip: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
mutex_destroy(&pct->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id abx500_pinctrl_id[] = {
|
|
{ "pinctrl-ab8500", PINCTRL_AB8500 },
|
|
{ "pinctrl-ab8540", PINCTRL_AB8540 },
|
|
{ "pinctrl-ab9540", PINCTRL_AB9540 },
|
|
{ "pinctrl-ab8505", PINCTRL_AB8505 },
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver abx500_gpio_driver = {
|
|
.driver = {
|
|
.name = "abx500-gpio",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = abx500_gpio_match,
|
|
},
|
|
.probe = abx500_gpio_probe,
|
|
.remove = abx500_gpio_remove,
|
|
.id_table = abx500_pinctrl_id,
|
|
};
|
|
|
|
static int __init abx500_gpio_init(void)
|
|
{
|
|
return platform_driver_register(&abx500_gpio_driver);
|
|
}
|
|
core_initcall(abx500_gpio_init);
|
|
|
|
MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>");
|
|
MODULE_DESCRIPTION("Driver allows to use AxB5xx unused pins to be used as GPIO");
|
|
MODULE_ALIAS("platform:abx500-gpio");
|
|
MODULE_LICENSE("GPL v2");
|