mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
c288575f78
Add new support for MT7531:
MT7531 is the next generation of MT7530. It is also a 7-ports switch with
5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu
port 6 only supports SGMII interface. Cpu port 5 supports either RGMII
or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like
mt7530. Due to SGMII interface support, pll, and pad setting are different
from MT7530. This patch adds different initial setting, and SGMII phylink
handlers of MT7531.
MT7531 SGMII interface can be configured in following mode:
- 'SGMII AN mode' with in-band negotiation capability
which is compatible with PHY_INTERFACE_MODE_SGMII.
- 'SGMII force mode' without in-band negotiation
which is compatible with 10B/8B encoding of
PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause.
- 2.5 times faster clocked 'SGMII force mode' without in-band negotiation
which is compatible with 10B/8B encoding of
PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
136 lines
3.7 KiB
Plaintext
136 lines
3.7 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
menu "Distributed Switch Architecture drivers"
|
|
depends on HAVE_NET_DSA
|
|
|
|
source "drivers/net/dsa/b53/Kconfig"
|
|
|
|
config NET_DSA_BCM_SF2
|
|
tristate "Broadcom Starfighter 2 Ethernet switch support"
|
|
depends on HAS_IOMEM && NET_DSA
|
|
select NET_DSA_TAG_BRCM
|
|
select FIXED_PHY
|
|
select BCM7XXX_PHY
|
|
select MDIO_BCM_UNIMAC
|
|
select B53
|
|
help
|
|
This enables support for the Broadcom Starfighter 2 Ethernet
|
|
switch chips.
|
|
|
|
config NET_DSA_LOOP
|
|
tristate "DSA mock-up Ethernet switch chip support"
|
|
depends on NET_DSA
|
|
select FIXED_PHY
|
|
help
|
|
This enables support for a fake mock-up switch chip which
|
|
exercises the DSA APIs.
|
|
|
|
config NET_DSA_LANTIQ_GSWIP
|
|
tristate "Lantiq / Intel GSWIP"
|
|
depends on HAS_IOMEM && NET_DSA
|
|
select NET_DSA_TAG_GSWIP
|
|
help
|
|
This enables support for the Lantiq / Intel GSWIP 2.1 found in
|
|
the xrx200 / VR9 SoC.
|
|
|
|
config NET_DSA_MT7530
|
|
tristate "MediaTek MT753x and MT7621 Ethernet switch support"
|
|
depends on NET_DSA
|
|
select NET_DSA_TAG_MTK
|
|
help
|
|
This enables support for the MediaTek MT7530, MT7531, and MT7621
|
|
Ethernet switch chips.
|
|
|
|
config NET_DSA_MV88E6060
|
|
tristate "Marvell 88E6060 ethernet switch chip support"
|
|
depends on NET_DSA
|
|
select NET_DSA_TAG_TRAILER
|
|
help
|
|
This enables support for the Marvell 88E6060 ethernet switch
|
|
chip.
|
|
|
|
source "drivers/net/dsa/microchip/Kconfig"
|
|
|
|
source "drivers/net/dsa/mv88e6xxx/Kconfig"
|
|
|
|
source "drivers/net/dsa/ocelot/Kconfig"
|
|
|
|
source "drivers/net/dsa/qca/Kconfig"
|
|
|
|
source "drivers/net/dsa/sja1105/Kconfig"
|
|
|
|
config NET_DSA_QCA8K
|
|
tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
|
|
depends on NET_DSA
|
|
select NET_DSA_TAG_QCA
|
|
select REGMAP
|
|
help
|
|
This enables support for the Qualcomm Atheros QCA8K Ethernet
|
|
switch chips.
|
|
|
|
config NET_DSA_REALTEK_SMI
|
|
tristate "Realtek SMI Ethernet switch family support"
|
|
depends on NET_DSA
|
|
select NET_DSA_TAG_RTL4_A
|
|
select FIXED_PHY
|
|
select IRQ_DOMAIN
|
|
select REALTEK_PHY
|
|
select REGMAP
|
|
help
|
|
This enables support for the Realtek SMI-based switch
|
|
chips, currently only RTL8366RB.
|
|
|
|
config NET_DSA_SMSC_LAN9303
|
|
tristate
|
|
select NET_DSA_TAG_LAN9303
|
|
select REGMAP
|
|
help
|
|
This enables support for the SMSC/Microchip LAN9303 3 port ethernet
|
|
switch chips.
|
|
|
|
config NET_DSA_SMSC_LAN9303_I2C
|
|
tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
|
|
depends on NET_DSA && I2C
|
|
select NET_DSA_SMSC_LAN9303
|
|
select REGMAP_I2C
|
|
help
|
|
Enable access functions if the SMSC/Microchip LAN9303 is configured
|
|
for I2C managed mode.
|
|
|
|
config NET_DSA_SMSC_LAN9303_MDIO
|
|
tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode"
|
|
depends on NET_DSA
|
|
select NET_DSA_SMSC_LAN9303
|
|
help
|
|
Enable access functions if the SMSC/Microchip LAN9303 is configured
|
|
for MDIO managed mode.
|
|
|
|
config NET_DSA_VITESSE_VSC73XX
|
|
tristate
|
|
depends on NET_DSA
|
|
select FIXED_PHY
|
|
select VITESSE_PHY
|
|
select GPIOLIB
|
|
help
|
|
This enables support for the Vitesse VSC7385, VSC7388,
|
|
VSC7395 and VSC7398 SparX integrated ethernet switches.
|
|
|
|
config NET_DSA_VITESSE_VSC73XX_SPI
|
|
tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
|
|
depends on NET_DSA
|
|
depends on SPI
|
|
select NET_DSA_VITESSE_VSC73XX
|
|
help
|
|
This enables support for the Vitesse VSC7385, VSC7388, VSC7395
|
|
and VSC7398 SparX integrated ethernet switches in SPI managed mode.
|
|
|
|
config NET_DSA_VITESSE_VSC73XX_PLATFORM
|
|
tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
|
|
depends on NET_DSA
|
|
depends on HAS_IOMEM
|
|
select NET_DSA_VITESSE_VSC73XX
|
|
help
|
|
This enables support for the Vitesse VSC7385, VSC7388, VSC7395
|
|
and VSC7398 SparX integrated ethernet switches, connected over
|
|
a CPU-attached address bus and work in memory-mapped I/O mode.
|
|
endmenu
|