mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 16:16:56 +07:00
37dddf14f1
This patch adds support to the Cadence PCIe controller in endpoint mode. Since pieces of source code are shared with the host driver (Root Complex mode), we create a new directory under drivers/pci dedicated to the Cadence PCIe controller. The common code is placed into drivers/pci/cadence/pcie-cadence.c and used by both the host and endpoint controller drivers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
42 lines
1.8 KiB
Makefile
42 lines
1.8 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
|
|
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
|
|
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
|
|
obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
|
|
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
|
|
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
|
|
obj-$(CONFIG_PCIE_RCAR) += pcie-rcar.o
|
|
obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
|
|
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
|
|
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
|
|
obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
|
|
obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o
|
|
obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
|
|
obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
|
|
obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
|
|
obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
|
|
obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
|
|
obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
|
|
obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
|
|
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
|
|
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
|
|
obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
|
|
obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
|
|
obj-$(CONFIG_VMD) += vmd.o
|
|
|
|
# The following drivers are for devices that use the generic ACPI
|
|
# pci_root.c driver but don't support standard ECAM config access.
|
|
# They contain MCFG quirks to replace the generic ECAM accessors with
|
|
# device-specific ones that are shared with the DT driver.
|
|
|
|
# The ACPI driver is generic and should not require driver-specific
|
|
# config options to be enabled, so we always build these drivers on
|
|
# ARM64 and use internal ifdefs to only build the pieces we need
|
|
# depending on whether ACPI, the DT driver, or both are enabled.
|
|
|
|
ifdef CONFIG_PCI
|
|
obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
|
|
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
|
|
obj-$(CONFIG_ARM64) += pci-xgene.o
|
|
endif
|