linux_dsm_epyc7002/drivers/gpu/drm/qxl/qxl_draw.c
Dave Airlie f64122c1f6 drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.

The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.

The releases are freed from a workqueue that wakes up and processes the
release ring.

releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.

The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.

This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.

Authors: Dave Airlie, Alon Levy

v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
      don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.

Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-12 13:51:07 +10:00

391 lines
12 KiB
C

/*
* Copyright 2011 Red Hat, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* on the rights to use, copy, modify, merge, publish, distribute, sub
* license, and/or sell copies of the Software, and to permit persons to whom
* the Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#include "qxl_drv.h"
#include "qxl_object.h"
/* returns a pointer to the already allocated qxl_rect array inside
* the qxl_clip_rects. This is *not* the same as the memory allocated
* on the device, it is offset to qxl_clip_rects.chunk.data */
static struct qxl_rect *drawable_set_clipping(struct qxl_device *qdev,
struct qxl_drawable *drawable,
unsigned num_clips,
struct qxl_bo **clips_bo,
struct qxl_release *release)
{
struct qxl_clip_rects *dev_clips;
int ret;
int size = sizeof(*dev_clips) + sizeof(struct qxl_rect) * num_clips;
ret = qxl_alloc_bo_reserved(qdev, size, clips_bo);
if (ret)
return NULL;
ret = qxl_bo_kmap(*clips_bo, (void **)&dev_clips);
if (ret) {
qxl_bo_unref(clips_bo);
return NULL;
}
dev_clips->num_rects = num_clips;
dev_clips->chunk.next_chunk = 0;
dev_clips->chunk.prev_chunk = 0;
dev_clips->chunk.data_size = sizeof(struct qxl_rect) * num_clips;
return (struct qxl_rect *)dev_clips->chunk.data;
}
static int
make_drawable(struct qxl_device *qdev, int surface, uint8_t type,
const struct qxl_rect *rect,
struct qxl_release **release)
{
struct qxl_drawable *drawable;
int i, ret;
ret = qxl_alloc_release_reserved(qdev, sizeof(*drawable),
QXL_RELEASE_DRAWABLE, release,
NULL);
if (ret)
return ret;
drawable = (struct qxl_drawable *)qxl_release_map(qdev, *release);
drawable->type = type;
drawable->surface_id = surface; /* Only primary for now */
drawable->effect = QXL_EFFECT_OPAQUE;
drawable->self_bitmap = 0;
drawable->self_bitmap_area.top = 0;
drawable->self_bitmap_area.left = 0;
drawable->self_bitmap_area.bottom = 0;
drawable->self_bitmap_area.right = 0;
/* FIXME: add clipping */
drawable->clip.type = SPICE_CLIP_TYPE_NONE;
/*
* surfaces_dest[i] should apparently be filled out with the
* surfaces that we depend on, and surface_rects should be
* filled with the rectangles of those surfaces that we
* are going to use.
*/
for (i = 0; i < 3; ++i)
drawable->surfaces_dest[i] = -1;
if (rect)
drawable->bbox = *rect;
drawable->mm_time = qdev->rom->mm_clock;
qxl_release_unmap(qdev, *release, &drawable->release_info);
return 0;
}
static int qxl_palette_create_1bit(struct qxl_bo **palette_bo,
const struct qxl_fb_image *qxl_fb_image)
{
struct qxl_device *qdev = qxl_fb_image->qdev;
const struct fb_image *fb_image = &qxl_fb_image->fb_image;
uint32_t visual = qxl_fb_image->visual;
const uint32_t *pseudo_palette = qxl_fb_image->pseudo_palette;
struct qxl_palette *pal;
int ret;
uint32_t fgcolor, bgcolor;
static uint64_t unique; /* we make no attempt to actually set this
* correctly globaly, since that would require
* tracking all of our palettes. */
ret = qxl_alloc_bo_reserved(qdev,
sizeof(struct qxl_palette) + sizeof(uint32_t) * 2,
palette_bo);
ret = qxl_bo_kmap(*palette_bo, (void **)&pal);
pal->num_ents = 2;
pal->unique = unique++;
if (visual == FB_VISUAL_TRUECOLOR || visual == FB_VISUAL_DIRECTCOLOR) {
/* NB: this is the only used branch currently. */
fgcolor = pseudo_palette[fb_image->fg_color];
bgcolor = pseudo_palette[fb_image->bg_color];
} else {
fgcolor = fb_image->fg_color;
bgcolor = fb_image->bg_color;
}
pal->ents[0] = bgcolor;
pal->ents[1] = fgcolor;
qxl_bo_kunmap(*palette_bo);
return 0;
}
void qxl_draw_opaque_fb(const struct qxl_fb_image *qxl_fb_image,
int stride /* filled in if 0 */)
{
struct qxl_device *qdev = qxl_fb_image->qdev;
struct qxl_drawable *drawable;
struct qxl_rect rect;
const struct fb_image *fb_image = &qxl_fb_image->fb_image;
int x = fb_image->dx;
int y = fb_image->dy;
int width = fb_image->width;
int height = fb_image->height;
const char *src = fb_image->data;
int depth = fb_image->depth;
struct qxl_release *release;
struct qxl_bo *image_bo;
struct qxl_image *image;
int ret;
if (stride == 0)
stride = depth * width / 8;
rect.left = x;
rect.right = x + width;
rect.top = y;
rect.bottom = y + height;
ret = make_drawable(qdev, 0, QXL_DRAW_COPY, &rect, &release);
if (ret)
return;
ret = qxl_image_create(qdev, release, &image_bo,
(const uint8_t *)src, 0, 0,
width, height, depth, stride);
if (ret) {
qxl_release_unreserve(qdev, release);
qxl_release_free(qdev, release);
return;
}
if (depth == 1) {
struct qxl_bo *palette_bo;
void *ptr;
ret = qxl_palette_create_1bit(&palette_bo, qxl_fb_image);
qxl_release_add_res(qdev, release, palette_bo);
ptr = qxl_bo_kmap_atomic_page(qdev, image_bo, 0);
image = ptr;
image->u.bitmap.palette =
qxl_bo_physical_address(qdev, palette_bo, 0);
qxl_bo_kunmap_atomic_page(qdev, image_bo, ptr);
qxl_bo_unreserve(palette_bo);
qxl_bo_unref(&palette_bo);
}
drawable = (struct qxl_drawable *)qxl_release_map(qdev, release);
drawable->u.copy.src_area.top = 0;
drawable->u.copy.src_area.bottom = height;
drawable->u.copy.src_area.left = 0;
drawable->u.copy.src_area.right = width;
drawable->u.copy.rop_descriptor = SPICE_ROPD_OP_PUT;
drawable->u.copy.scale_mode = 0;
drawable->u.copy.mask.flags = 0;
drawable->u.copy.mask.pos.x = 0;
drawable->u.copy.mask.pos.y = 0;
drawable->u.copy.mask.bitmap = 0;
drawable->u.copy.src_bitmap =
qxl_bo_physical_address(qdev, image_bo, 0);
qxl_release_unmap(qdev, release, &drawable->release_info);
qxl_release_add_res(qdev, release, image_bo);
qxl_bo_unreserve(image_bo);
qxl_bo_unref(&image_bo);
qxl_fence_releaseable(qdev, release);
qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
qxl_release_unreserve(qdev, release);
}
/* push a draw command using the given clipping rectangles as
* the sources from the shadow framebuffer.
*
* Right now implementing with a single draw and a clip list. Clip
* lists are known to be a problem performance wise, this can be solved
* by treating them differently in the server.
*/
void qxl_draw_dirty_fb(struct qxl_device *qdev,
struct qxl_framebuffer *qxl_fb,
struct qxl_bo *bo,
unsigned flags, unsigned color,
struct drm_clip_rect *clips,
unsigned num_clips, int inc)
{
/*
* TODO: if flags & DRM_MODE_FB_DIRTY_ANNOTATE_FILL then we should
* send a fill command instead, much cheaper.
*
* See include/drm/drm_mode.h
*/
struct drm_clip_rect *clips_ptr;
int i;
int left, right, top, bottom;
int width, height;
struct qxl_drawable *drawable;
struct qxl_rect drawable_rect;
struct qxl_rect *rects;
int stride = qxl_fb->base.pitches[0];
/* depth is not actually interesting, we don't mask with it */
int depth = qxl_fb->base.bits_per_pixel;
uint8_t *surface_base;
struct qxl_release *release;
struct qxl_bo *image_bo;
struct qxl_bo *clips_bo;
int ret;
left = clips->x1;
right = clips->x2;
top = clips->y1;
bottom = clips->y2;
/* skip the first clip rect */
for (i = 1, clips_ptr = clips + inc;
i < num_clips; i++, clips_ptr += inc) {
left = min_t(int, left, (int)clips_ptr->x1);
right = max_t(int, right, (int)clips_ptr->x2);
top = min_t(int, top, (int)clips_ptr->y1);
bottom = max_t(int, bottom, (int)clips_ptr->y2);
}
width = right - left;
height = bottom - top;
drawable_rect.left = left;
drawable_rect.right = right;
drawable_rect.top = top;
drawable_rect.bottom = bottom;
ret = make_drawable(qdev, 0, QXL_DRAW_COPY, &drawable_rect,
&release);
if (ret)
return;
ret = qxl_bo_kmap(bo, (void **)&surface_base);
if (ret)
goto out_unref;
ret = qxl_image_create(qdev, release, &image_bo, surface_base,
left, top, width, height, depth, stride);
qxl_bo_kunmap(bo);
if (ret)
goto out_unref;
rects = drawable_set_clipping(qdev, drawable, num_clips, &clips_bo, release);
if (!rects) {
qxl_bo_unref(&image_bo);
goto out_unref;
}
drawable = (struct qxl_drawable *)qxl_release_map(qdev, release);
drawable->clip.type = SPICE_CLIP_TYPE_RECTS;
drawable->clip.data = qxl_bo_physical_address(qdev,
clips_bo, 0);
qxl_release_add_res(qdev, release, clips_bo);
drawable->u.copy.src_area.top = 0;
drawable->u.copy.src_area.bottom = height;
drawable->u.copy.src_area.left = 0;
drawable->u.copy.src_area.right = width;
drawable->u.copy.rop_descriptor = SPICE_ROPD_OP_PUT;
drawable->u.copy.scale_mode = 0;
drawable->u.copy.mask.flags = 0;
drawable->u.copy.mask.pos.x = 0;
drawable->u.copy.mask.pos.y = 0;
drawable->u.copy.mask.bitmap = 0;
drawable->u.copy.src_bitmap = qxl_bo_physical_address(qdev, image_bo, 0);
qxl_release_unmap(qdev, release, &drawable->release_info);
qxl_release_add_res(qdev, release, image_bo);
qxl_bo_unreserve(image_bo);
qxl_bo_unref(&image_bo);
clips_ptr = clips;
for (i = 0; i < num_clips; i++, clips_ptr += inc) {
rects[i].left = clips_ptr->x1;
rects[i].right = clips_ptr->x2;
rects[i].top = clips_ptr->y1;
rects[i].bottom = clips_ptr->y2;
}
qxl_bo_kunmap(clips_bo);
qxl_bo_unreserve(clips_bo);
qxl_bo_unref(&clips_bo);
qxl_fence_releaseable(qdev, release);
qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
qxl_release_unreserve(qdev, release);
return;
out_unref:
qxl_release_unreserve(qdev, release);
qxl_release_free(qdev, release);
}
void qxl_draw_copyarea(struct qxl_device *qdev,
u32 width, u32 height,
u32 sx, u32 sy,
u32 dx, u32 dy)
{
struct qxl_drawable *drawable;
struct qxl_rect rect;
struct qxl_release *release;
int ret;
rect.left = dx;
rect.top = dy;
rect.right = dx + width;
rect.bottom = dy + height;
ret = make_drawable(qdev, 0, QXL_COPY_BITS, &rect, &release);
if (ret)
return;
drawable = (struct qxl_drawable *)qxl_release_map(qdev, release);
drawable->u.copy_bits.src_pos.x = sx;
drawable->u.copy_bits.src_pos.y = sy;
qxl_release_unmap(qdev, release, &drawable->release_info);
qxl_fence_releaseable(qdev, release);
qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
qxl_release_unreserve(qdev, release);
}
void qxl_draw_fill(struct qxl_draw_fill *qxl_draw_fill_rec)
{
struct qxl_device *qdev = qxl_draw_fill_rec->qdev;
struct qxl_rect rect = qxl_draw_fill_rec->rect;
uint32_t color = qxl_draw_fill_rec->color;
uint16_t rop = qxl_draw_fill_rec->rop;
struct qxl_drawable *drawable;
struct qxl_release *release;
int ret;
ret = make_drawable(qdev, 0, QXL_DRAW_FILL, &rect, &release);
if (ret)
return;
drawable = (struct qxl_drawable *)qxl_release_map(qdev, release);
drawable->u.fill.brush.type = SPICE_BRUSH_TYPE_SOLID;
drawable->u.fill.brush.u.color = color;
drawable->u.fill.rop_descriptor = rop;
drawable->u.fill.mask.flags = 0;
drawable->u.fill.mask.pos.x = 0;
drawable->u.fill.mask.pos.y = 0;
drawable->u.fill.mask.bitmap = 0;
qxl_release_unmap(qdev, release, &drawable->release_info);
qxl_fence_releaseable(qdev, release);
qxl_push_command_ring_release(qdev, release, QXL_CMD_DRAW, false);
qxl_release_unreserve(qdev, release);
}