linux_dsm_epyc7002/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
Hante Meuleman 2def5c10d2 brcmfmac: sdio unload fix.
on sdio remove the bus_if should be configured for close, so
new data from higher layers will be blocked. Also the access
to bus_if in the watchdog should be checked for null pointer
access on sdio remove.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16 14:29:00 -05:00

560 lines
13 KiB
C

/*
* Copyright (c) 2010 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/* ****************** SDIO CARD Interface Functions **************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/sched.h>
#include <linux/completion.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/card.h>
#include <defs.h>
#include <brcm_hw_ids.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
#include <soc.h>
#include "dhd_bus.h"
#include "dhd_dbg.h"
#include "sdio_host.h"
#define SDIOH_API_ACCESS_RETRY_LIMIT 2
#ifdef CONFIG_BRCMFMAC_SDIO_OOB
static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id)
{
struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(dev_id);
brcmf_dbg(INTR, "oob intr triggered\n");
/*
* out-of-band interrupt is level-triggered which won't
* be cleared until dpc
*/
if (sdiodev->irq_en) {
disable_irq_nosync(irq);
sdiodev->irq_en = false;
}
brcmf_sdbrcm_isr(sdiodev->bus);
return IRQ_HANDLED;
}
int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
{
int ret = 0;
u8 data;
unsigned long flags;
brcmf_dbg(TRACE, "Entering\n");
brcmf_dbg(ERROR, "requesting irq %d\n", sdiodev->irq);
ret = request_irq(sdiodev->irq, brcmf_sdio_irqhandler,
sdiodev->irq_flags, "brcmf_oob_intr",
&sdiodev->func[1]->card->dev);
if (ret != 0)
return ret;
spin_lock_init(&sdiodev->irq_en_lock);
spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
sdiodev->irq_en = true;
spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
ret = enable_irq_wake(sdiodev->irq);
if (ret != 0)
return ret;
sdiodev->irq_wake = true;
sdio_claim_host(sdiodev->func[1]);
/* must configure SDIO_CCCR_IENx to enable irq */
data = brcmf_sdio_regrb(sdiodev, SDIO_CCCR_IENx, &ret);
data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, data, &ret);
/* redirect, configure and enable io for interrupt signal */
data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
if (sdiodev->irq_flags & IRQF_TRIGGER_HIGH)
data |= SDIO_SEPINT_ACT_HI;
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, data, &ret);
sdio_release_host(sdiodev->func[1]);
return 0;
}
int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
{
brcmf_dbg(TRACE, "Entering\n");
sdio_claim_host(sdiodev->func[1]);
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
brcmf_sdio_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
sdio_release_host(sdiodev->func[1]);
if (sdiodev->irq_wake) {
disable_irq_wake(sdiodev->irq);
sdiodev->irq_wake = false;
}
free_irq(sdiodev->irq, &sdiodev->func[1]->card->dev);
sdiodev->irq_en = false;
return 0;
}
#else /* CONFIG_BRCMFMAC_SDIO_OOB */
static void brcmf_sdio_irqhandler(struct sdio_func *func)
{
struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(&func->card->dev);
brcmf_dbg(INTR, "ib intr triggered\n");
brcmf_sdbrcm_isr(sdiodev->bus);
}
/* dummy handler for SDIO function 2 interrupt */
static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func)
{
}
int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
{
brcmf_dbg(TRACE, "Entering\n");
sdio_claim_host(sdiodev->func[1]);
sdio_claim_irq(sdiodev->func[1], brcmf_sdio_irqhandler);
sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
sdio_release_host(sdiodev->func[1]);
return 0;
}
int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
{
brcmf_dbg(TRACE, "Entering\n");
sdio_claim_host(sdiodev->func[1]);
sdio_release_irq(sdiodev->func[2]);
sdio_release_irq(sdiodev->func[1]);
sdio_release_host(sdiodev->func[1]);
return 0;
}
#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
int
brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
{
int err = 0, i;
u8 addr[3];
s32 retry;
addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK;
addr[1] = (address >> 16) & SBSDIO_SBADDRMID_MASK;
addr[2] = (address >> 24) & SBSDIO_SBADDRHIGH_MASK;
for (i = 0; i < 3; i++) {
retry = 0;
do {
if (retry)
usleep_range(1000, 2000);
err = brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE,
SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW + i,
&addr[i]);
} while (err != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
if (err) {
brcmf_dbg(ERROR, "failed at addr:0x%0x\n",
SBSDIO_FUNC1_SBADDRLOW + i);
break;
}
}
return err;
}
int
brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
void *data, bool write)
{
u8 func_num, reg_size;
u32 bar;
s32 retry = 0;
int ret;
/*
* figure out how to read the register based on address range
* 0x00 ~ 0x7FF: function 0 CCCR and FBR
* 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers
* The rest: function 1 silicon backplane core registers
*/
if ((addr & ~REG_F0_REG_MASK) == 0) {
func_num = SDIO_FUNC_0;
reg_size = 1;
} else if ((addr & ~REG_F1_MISC_MASK) == 0) {
func_num = SDIO_FUNC_1;
reg_size = 1;
} else {
func_num = SDIO_FUNC_1;
reg_size = 4;
/* Set the window for SB core register */
bar = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
if (bar != sdiodev->sbwad) {
ret = brcmf_sdcard_set_sbaddr_window(sdiodev, bar);
if (ret != 0) {
memset(data, 0xFF, reg_size);
return ret;
}
sdiodev->sbwad = bar;
}
addr &= SBSDIO_SB_OFT_ADDR_MASK;
addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
}
do {
if (!write)
memset(data, 0, reg_size);
if (retry) /* wait for 1 ms till bus get settled down */
usleep_range(1000, 2000);
if (reg_size == 1)
ret = brcmf_sdioh_request_byte(sdiodev, write,
func_num, addr, data);
else
ret = brcmf_sdioh_request_word(sdiodev, write,
func_num, addr, data, 4);
} while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
if (ret != 0)
brcmf_dbg(ERROR, "failed with %d\n", ret);
return ret;
}
u8 brcmf_sdio_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
{
u8 data;
int retval;
brcmf_dbg(INFO, "addr:0x%08x\n", addr);
retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
brcmf_dbg(INFO, "data:0x%02x\n", data);
if (ret)
*ret = retval;
return data;
}
u32 brcmf_sdio_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret)
{
u32 data;
int retval;
brcmf_dbg(INFO, "addr:0x%08x\n", addr);
retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, false);
brcmf_dbg(INFO, "data:0x%08x\n", data);
if (ret)
*ret = retval;
return data;
}
void brcmf_sdio_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr,
u8 data, int *ret)
{
int retval;
brcmf_dbg(INFO, "addr:0x%08x, data:0x%02x\n", addr, data);
retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
if (ret)
*ret = retval;
}
void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
u32 data, int *ret)
{
int retval;
brcmf_dbg(INFO, "addr:0x%08x, data:0x%08x\n", addr, data);
retval = brcmf_sdio_regrw_helper(sdiodev, addr, &data, true);
if (ret)
*ret = retval;
}
static int brcmf_sdcard_recv_prepare(struct brcmf_sdio_dev *sdiodev, uint fn,
uint flags, uint width, u32 *addr)
{
uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
int err = 0;
/* Async not implemented yet */
if (flags & SDIO_REQ_ASYNC)
return -ENOTSUPP;
if (bar0 != sdiodev->sbwad) {
err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
if (err)
return err;
sdiodev->sbwad = bar0;
}
*addr &= SBSDIO_SB_OFT_ADDR_MASK;
if (width == 4)
*addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
return 0;
}
int
brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
uint flags, u8 *buf, uint nbytes)
{
struct sk_buff *mypkt;
int err;
mypkt = brcmu_pkt_buf_get_skb(nbytes);
if (!mypkt) {
brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n",
nbytes);
return -EIO;
}
err = brcmf_sdcard_recv_pkt(sdiodev, addr, fn, flags, mypkt);
if (!err)
memcpy(buf, mypkt->data, nbytes);
brcmu_pkt_buf_free_skb(mypkt);
return err;
}
int
brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
uint flags, struct sk_buff *pkt)
{
uint incr_fix;
uint width;
int err = 0;
brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n",
fn, addr, pkt->len);
width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
err = brcmf_sdcard_recv_prepare(sdiodev, fn, flags, width, &addr);
if (err)
goto done;
incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
err = brcmf_sdioh_request_buffer(sdiodev, incr_fix, SDIOH_READ,
fn, addr, pkt);
done:
return err;
}
int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
uint flags, struct sk_buff_head *pktq)
{
uint incr_fix;
uint width;
int err = 0;
brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n",
fn, addr, pktq->qlen);
width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
err = brcmf_sdcard_recv_prepare(sdiodev, fn, flags, width, &addr);
if (err)
goto done;
incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
err = brcmf_sdioh_request_chain(sdiodev, incr_fix, SDIOH_READ, fn, addr,
pktq);
done:
return err;
}
int
brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
uint flags, u8 *buf, uint nbytes)
{
struct sk_buff *mypkt;
int err;
mypkt = brcmu_pkt_buf_get_skb(nbytes);
if (!mypkt) {
brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n",
nbytes);
return -EIO;
}
memcpy(mypkt->data, buf, nbytes);
err = brcmf_sdcard_send_pkt(sdiodev, addr, fn, flags, mypkt);
brcmu_pkt_buf_free_skb(mypkt);
return err;
}
int
brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
uint flags, struct sk_buff *pkt)
{
uint incr_fix;
uint width;
uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
int err = 0;
brcmf_dbg(INFO, "fun = %d, addr = 0x%x, size = %d\n",
fn, addr, pkt->len);
/* Async not implemented yet */
if (flags & SDIO_REQ_ASYNC)
return -ENOTSUPP;
if (bar0 != sdiodev->sbwad) {
err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
if (err)
goto done;
sdiodev->sbwad = bar0;
}
addr &= SBSDIO_SB_OFT_ADDR_MASK;
incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
if (width == 4)
addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
err = brcmf_sdioh_request_buffer(sdiodev, incr_fix, SDIOH_WRITE, fn,
addr, pkt);
done:
return err;
}
int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw, u32 addr,
u8 *buf, uint nbytes)
{
struct sk_buff *mypkt;
bool write = rw ? SDIOH_WRITE : SDIOH_READ;
int err;
addr &= SBSDIO_SB_OFT_ADDR_MASK;
addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
mypkt = brcmu_pkt_buf_get_skb(nbytes);
if (!mypkt) {
brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: len %d\n",
nbytes);
return -EIO;
}
/* For a write, copy the buffer data into the packet. */
if (write)
memcpy(mypkt->data, buf, nbytes);
err = brcmf_sdioh_request_buffer(sdiodev, SDIOH_DATA_INC, write,
SDIO_FUNC_1, addr, mypkt);
/* For a read, copy the packet data back to the buffer. */
if (!err && !write)
memcpy(buf, mypkt->data, nbytes);
brcmu_pkt_buf_free_skb(mypkt);
return err;
}
int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn)
{
char t_func = (char)fn;
brcmf_dbg(TRACE, "Enter\n");
/* issue abort cmd52 command through F0 */
brcmf_sdioh_request_byte(sdiodev, SDIOH_WRITE, SDIO_FUNC_0,
SDIO_CCCR_ABORT, &t_func);
brcmf_dbg(TRACE, "Exit\n");
return 0;
}
int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
{
u32 regs = 0;
int ret = 0;
ret = brcmf_sdioh_attach(sdiodev);
if (ret)
goto out;
regs = SI_ENUM_BASE;
/* Report the BAR, to fix if needed */
sdiodev->sbwad = SI_ENUM_BASE;
/* try to attach to the target device */
sdiodev->bus = brcmf_sdbrcm_probe(regs, sdiodev);
if (!sdiodev->bus) {
brcmf_dbg(ERROR, "device attach failed\n");
ret = -ENODEV;
goto out;
}
out:
if (ret)
brcmf_sdio_remove(sdiodev);
return ret;
}
EXPORT_SYMBOL(brcmf_sdio_probe);
int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev)
{
sdiodev->bus_if->state = BRCMF_BUS_DOWN;
if (sdiodev->bus) {
brcmf_sdbrcm_disconnect(sdiodev->bus);
sdiodev->bus = NULL;
}
brcmf_sdioh_detach(sdiodev);
sdiodev->sbwad = 0;
return 0;
}
EXPORT_SYMBOL(brcmf_sdio_remove);
void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev, bool enable)
{
if (enable)
brcmf_sdbrcm_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
else
brcmf_sdbrcm_wd_timer(sdiodev->bus, 0);
}