linux_dsm_epyc7002/drivers/media/video/mx1_camera.c
Guennadi Liakhovetski 2dd54a54c1 V4L/DVB (12424): soc-camera: fix recursive locking in .buf_queue()
The .buf_queue() V4L2 driver method is called under
spinlock_irqsave(q->irqlock,...), don't take the lock again inside the
function.

Reported-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13 20:39:11 -03:00

820 lines
20 KiB
C

/*
* V4L2 Driver for i.MXL/i.MXL camera (CSI) host
*
* Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
* Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
*
* Based on PXA SoC camera driver
* Copyright (C) 2006, Sascha Hauer, Pengutronix
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/time.h>
#include <linux/version.h>
#include <linux/videodev2.h>
#include <media/soc_camera.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
#include <media/videobuf-dma-contig.h>
#include <asm/dma.h>
#include <asm/fiq.h>
#include <mach/dma-mx1-mx2.h>
#include <mach/hardware.h>
#include <mach/mx1_camera.h>
/*
* CSI registers
*/
#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */
#define DMA_DIMR 0x08 /* Interrupt mask Register */
#define CSICR1 0x00 /* CSI Control Register 1 */
#define CSISR 0x08 /* CSI Status Register */
#define CSIRXR 0x10 /* CSI RxFIFO Register */
#define CSICR1_RXFF_LEVEL(x) (((x) & 0x3) << 19)
#define CSICR1_SOF_POL (1 << 17)
#define CSICR1_SOF_INTEN (1 << 16)
#define CSICR1_MCLKDIV(x) (((x) & 0xf) << 12)
#define CSICR1_MCLKEN (1 << 9)
#define CSICR1_FCC (1 << 8)
#define CSICR1_BIG_ENDIAN (1 << 7)
#define CSICR1_CLR_RXFIFO (1 << 5)
#define CSICR1_GCLK_MODE (1 << 4)
#define CSICR1_DATA_POL (1 << 2)
#define CSICR1_REDGE (1 << 1)
#define CSICR1_EN (1 << 0)
#define CSISR_SFF_OR_INT (1 << 25)
#define CSISR_RFF_OR_INT (1 << 24)
#define CSISR_STATFF_INT (1 << 21)
#define CSISR_RXFF_INT (1 << 18)
#define CSISR_SOF_INT (1 << 16)
#define CSISR_DRDY (1 << 0)
#define VERSION_CODE KERNEL_VERSION(0, 0, 1)
#define DRIVER_NAME "mx1-camera"
#define CSI_IRQ_MASK (CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
CSISR_STATFF_INT | CSISR_RXFF_INT | CSISR_SOF_INT)
#define CSI_BUS_FLAGS (SOCAM_MASTER | SOCAM_HSYNC_ACTIVE_HIGH | \
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | \
SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \
SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW | \
SOCAM_DATAWIDTH_8)
#define MAX_VIDEO_MEM 16 /* Video memory limit in megabytes */
/*
* Structures
*/
/* buffer for one video frame */
struct mx1_buffer {
/* common v4l buffer stuff -- must be first */
struct videobuf_buffer vb;
const struct soc_camera_data_format *fmt;
int inwork;
};
/* i.MX1/i.MXL is only supposed to handle one camera on its Camera Sensor
* Interface. If anyone ever builds hardware to enable more than
* one camera, they will have to modify this driver too */
struct mx1_camera_dev {
struct soc_camera_host soc_host;
struct soc_camera_device *icd;
struct mx1_camera_pdata *pdata;
struct mx1_buffer *active;
struct resource *res;
struct clk *clk;
struct list_head capture;
void __iomem *base;
int dma_chan;
unsigned int irq;
unsigned long mclk;
spinlock_t lock;
};
/*
* Videobuf operations
*/
static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
unsigned int *size)
{
struct soc_camera_device *icd = vq->priv_data;
*size = icd->width * icd->height *
((icd->current_fmt->depth + 7) >> 3);
if (!*count)
*count = 32;
while (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
(*count)--;
dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
return 0;
}
static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf)
{
struct soc_camera_device *icd = vq->priv_data;
struct videobuf_buffer *vb = &buf->vb;
BUG_ON(in_interrupt());
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
/* This waits until this buffer is out of danger, i.e., until it is no
* longer in STATE_QUEUED or STATE_ACTIVE */
videobuf_waiton(vb, 0, 0);
videobuf_dma_contig_free(vq, vb);
vb->state = VIDEOBUF_NEEDS_INIT;
}
static int mx1_videobuf_prepare(struct videobuf_queue *vq,
struct videobuf_buffer *vb, enum v4l2_field field)
{
struct soc_camera_device *icd = vq->priv_data;
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
int ret;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
/* Added list head initialization on alloc */
WARN_ON(!list_empty(&vb->queue));
BUG_ON(NULL == icd->current_fmt);
/* I think, in buf_prepare you only have to protect global data,
* the actual buffer is yours */
buf->inwork = 1;
if (buf->fmt != icd->current_fmt ||
vb->width != icd->width ||
vb->height != icd->height ||
vb->field != field) {
buf->fmt = icd->current_fmt;
vb->width = icd->width;
vb->height = icd->height;
vb->field = field;
vb->state = VIDEOBUF_NEEDS_INIT;
}
vb->size = vb->width * vb->height * ((buf->fmt->depth + 7) >> 3);
if (0 != vb->baddr && vb->bsize < vb->size) {
ret = -EINVAL;
goto out;
}
if (vb->state == VIDEOBUF_NEEDS_INIT) {
ret = videobuf_iolock(vq, vb, NULL);
if (ret)
goto fail;
vb->state = VIDEOBUF_PREPARED;
}
buf->inwork = 0;
return 0;
fail:
free_buffer(vq, buf);
out:
buf->inwork = 0;
return ret;
}
static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
{
struct videobuf_buffer *vbuf = &pcdev->active->vb;
int ret;
if (unlikely(!pcdev->active)) {
dev_err(pcdev->soc_host.dev, "DMA End IRQ with no active buffer\n");
return -EFAULT;
}
/* setup sg list for future DMA */
ret = imx_dma_setup_single(pcdev->dma_chan,
videobuf_to_dma_contig(vbuf),
vbuf->size, pcdev->res->start +
CSIRXR, DMA_MODE_READ);
if (unlikely(ret))
dev_err(pcdev->soc_host.dev, "Failed to setup DMA sg list\n");
return ret;
}
/* Called under spinlock_irqsave(&pcdev->lock, ...) */
static void mx1_videobuf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
list_add_tail(&vb->queue, &pcdev->capture);
vb->state = VIDEOBUF_ACTIVE;
if (!pcdev->active) {
pcdev->active = buf;
/* setup sg list for future DMA */
if (!mx1_camera_setup_dma(pcdev)) {
unsigned int temp;
/* enable SOF irq */
temp = __raw_readl(pcdev->base + CSICR1) |
CSICR1_SOF_INTEN;
__raw_writel(temp, pcdev->base + CSICR1);
}
}
}
static void mx1_videobuf_release(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
#ifdef DEBUG
struct soc_camera_device *icd = vq->priv_data;
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
switch (vb->state) {
case VIDEOBUF_ACTIVE:
dev_dbg(&icd->dev, "%s (active)\n", __func__);
break;
case VIDEOBUF_QUEUED:
dev_dbg(&icd->dev, "%s (queued)\n", __func__);
break;
case VIDEOBUF_PREPARED:
dev_dbg(&icd->dev, "%s (prepared)\n", __func__);
break;
default:
dev_dbg(&icd->dev, "%s (unknown)\n", __func__);
break;
}
#endif
free_buffer(vq, buf);
}
static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev,
struct videobuf_buffer *vb,
struct mx1_buffer *buf)
{
/* _init is used to debug races, see comment in mx1_camera_reqbufs() */
list_del_init(&vb->queue);
vb->state = VIDEOBUF_DONE;
do_gettimeofday(&vb->ts);
vb->field_count++;
wake_up(&vb->done);
if (list_empty(&pcdev->capture)) {
pcdev->active = NULL;
return;
}
pcdev->active = list_entry(pcdev->capture.next,
struct mx1_buffer, vb.queue);
/* setup sg list for future DMA */
if (likely(!mx1_camera_setup_dma(pcdev))) {
unsigned int temp;
/* enable SOF irq */
temp = __raw_readl(pcdev->base + CSICR1) | CSICR1_SOF_INTEN;
__raw_writel(temp, pcdev->base + CSICR1);
}
}
static void mx1_camera_dma_irq(int channel, void *data)
{
struct mx1_camera_dev *pcdev = data;
struct mx1_buffer *buf;
struct videobuf_buffer *vb;
unsigned long flags;
spin_lock_irqsave(&pcdev->lock, flags);
imx_dma_disable(channel);
if (unlikely(!pcdev->active)) {
dev_err(pcdev->soc_host.dev, "DMA End IRQ with no active buffer\n");
goto out;
}
vb = &pcdev->active->vb;
buf = container_of(vb, struct mx1_buffer, vb);
WARN_ON(buf->inwork || list_empty(&vb->queue));
dev_dbg(pcdev->soc_host.dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
mx1_camera_wakeup(pcdev, vb, buf);
out:
spin_unlock_irqrestore(&pcdev->lock, flags);
}
static struct videobuf_queue_ops mx1_videobuf_ops = {
.buf_setup = mx1_videobuf_setup,
.buf_prepare = mx1_videobuf_prepare,
.buf_queue = mx1_videobuf_queue,
.buf_release = mx1_videobuf_release,
};
static void mx1_camera_init_videobuf(struct videobuf_queue *q,
struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, ici->dev,
&pcdev->lock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_NONE,
sizeof(struct mx1_buffer), icd);
}
static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
{
unsigned int mclk = pcdev->mclk;
unsigned long div;
unsigned long lcdclk;
lcdclk = clk_get_rate(pcdev->clk);
/* We verify platform_mclk_10khz != 0, so if anyone breaks it, here
* they get a nice Oops */
div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
dev_dbg(pcdev->soc_host.dev, "System clock %lukHz, target freq %dkHz, "
"divisor %lu\n", lcdclk / 1000, mclk / 1000, div);
return div;
}
static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
{
unsigned int csicr1 = CSICR1_EN;
dev_dbg(pcdev->soc_host.dev, "Activate device\n");
clk_enable(pcdev->clk);
/* enable CSI before doing anything else */
__raw_writel(csicr1, pcdev->base + CSICR1);
csicr1 |= CSICR1_MCLKEN | CSICR1_FCC | CSICR1_GCLK_MODE;
csicr1 |= CSICR1_MCLKDIV(mclk_get_divisor(pcdev));
csicr1 |= CSICR1_RXFF_LEVEL(2); /* 16 words */
__raw_writel(csicr1, pcdev->base + CSICR1);
}
static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
{
dev_dbg(pcdev->soc_host.dev, "Deactivate device\n");
/* Disable all CSI interface */
__raw_writel(0x00, pcdev->base + CSICR1);
clk_disable(pcdev->clk);
}
/* The following two functions absolutely depend on the fact, that
* there can be only one camera on i.MX1/i.MXL camera sensor interface */
static int mx1_camera_add_device(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
int ret;
if (pcdev->icd) {
ret = -EBUSY;
goto ebusy;
}
dev_info(&icd->dev, "MX1 Camera driver attached to camera %d\n",
icd->devnum);
mx1_camera_activate(pcdev);
ret = icd->ops->init(icd);
if (!ret)
pcdev->icd = icd;
ebusy:
return ret;
}
static void mx1_camera_remove_device(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
unsigned int csicr1;
BUG_ON(icd != pcdev->icd);
/* disable interrupts */
csicr1 = __raw_readl(pcdev->base + CSICR1) & ~CSI_IRQ_MASK;
__raw_writel(csicr1, pcdev->base + CSICR1);
/* Stop DMA engine */
imx_dma_disable(pcdev->dma_chan);
dev_info(&icd->dev, "MX1 Camera driver detached from camera %d\n",
icd->devnum);
icd->ops->release(icd);
mx1_camera_deactivate(pcdev);
pcdev->icd = NULL;
}
static int mx1_camera_set_crop(struct soc_camera_device *icd,
struct v4l2_rect *rect)
{
return icd->ops->set_crop(icd, rect);
}
static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
unsigned long camera_flags, common_flags;
unsigned int csicr1;
int ret;
camera_flags = icd->ops->query_bus_param(icd);
/* MX1 supports only 8bit buswidth */
common_flags = soc_camera_bus_param_compatible(camera_flags,
CSI_BUS_FLAGS);
if (!common_flags)
return -EINVAL;
icd->buswidth = 8;
/* Make choises, based on platform choice */
if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
(common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
if (!pcdev->pdata ||
pcdev->pdata->flags & MX1_CAMERA_VSYNC_HIGH)
common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
else
common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
}
if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
(common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
if (!pcdev->pdata ||
pcdev->pdata->flags & MX1_CAMERA_PCLK_RISING)
common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
else
common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
}
if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
(common_flags & SOCAM_DATA_ACTIVE_LOW)) {
if (!pcdev->pdata ||
pcdev->pdata->flags & MX1_CAMERA_DATA_HIGH)
common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
else
common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
}
ret = icd->ops->set_bus_param(icd, common_flags);
if (ret < 0)
return ret;
csicr1 = __raw_readl(pcdev->base + CSICR1);
if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
if (common_flags & SOCAM_DATA_ACTIVE_LOW)
csicr1 |= CSICR1_DATA_POL;
__raw_writel(csicr1, pcdev->base + CSICR1);
return 0;
}
static int mx1_camera_set_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
const struct soc_camera_format_xlate *xlate;
struct v4l2_pix_format *pix = &f->fmt.pix;
int ret;
xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
if (!xlate) {
dev_warn(ici->dev, "Format %x not found\n", pix->pixelformat);
return -EINVAL;
}
ret = icd->ops->set_fmt(icd, f);
if (!ret) {
icd->buswidth = xlate->buswidth;
icd->current_fmt = xlate->host_fmt;
}
return ret;
}
static int mx1_camera_try_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
/* TODO: limit to mx1 hardware capabilities */
/* limit to sensor capabilities */
return icd->ops->try_fmt(icd, f);
}
static int mx1_camera_reqbufs(struct soc_camera_file *icf,
struct v4l2_requestbuffers *p)
{
int i;
/* This is for locking debugging only. I removed spinlocks and now I
* check whether .prepare is ever called on a linked buffer, or whether
* a dma IRQ can occur for an in-work or unlinked buffer. Until now
* it hadn't triggered */
for (i = 0; i < p->count; i++) {
struct mx1_buffer *buf = container_of(icf->vb_vidq.bufs[i],
struct mx1_buffer, vb);
buf->inwork = 0;
INIT_LIST_HEAD(&buf->vb.queue);
}
return 0;
}
static unsigned int mx1_camera_poll(struct file *file, poll_table *pt)
{
struct soc_camera_file *icf = file->private_data;
struct mx1_buffer *buf;
buf = list_entry(icf->vb_vidq.stream.next, struct mx1_buffer,
vb.stream);
poll_wait(file, &buf->vb.done, pt);
if (buf->vb.state == VIDEOBUF_DONE ||
buf->vb.state == VIDEOBUF_ERROR)
return POLLIN | POLLRDNORM;
return 0;
}
static int mx1_camera_querycap(struct soc_camera_host *ici,
struct v4l2_capability *cap)
{
/* cap->name is set by the friendly caller:-> */
strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card));
cap->version = VERSION_CODE;
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
return 0;
}
static struct soc_camera_host_ops mx1_soc_camera_host_ops = {
.owner = THIS_MODULE,
.add = mx1_camera_add_device,
.remove = mx1_camera_remove_device,
.set_bus_param = mx1_camera_set_bus_param,
.set_crop = mx1_camera_set_crop,
.set_fmt = mx1_camera_set_fmt,
.try_fmt = mx1_camera_try_fmt,
.init_videobuf = mx1_camera_init_videobuf,
.reqbufs = mx1_camera_reqbufs,
.poll = mx1_camera_poll,
.querycap = mx1_camera_querycap,
};
static struct fiq_handler fh = {
.name = "csi_sof"
};
static int __init mx1_camera_probe(struct platform_device *pdev)
{
struct mx1_camera_dev *pcdev;
struct resource *res;
struct pt_regs regs;
struct clk *clk;
void __iomem *base;
unsigned int irq;
int err = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!res || !irq) {
err = -ENODEV;
goto exit;
}
clk = clk_get(&pdev->dev, "csi_clk");
if (IS_ERR(clk)) {
err = PTR_ERR(clk);
goto exit;
}
pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
if (!pcdev) {
dev_err(&pdev->dev, "Could not allocate pcdev\n");
err = -ENOMEM;
goto exit_put_clk;
}
pcdev->res = res;
pcdev->clk = clk;
pcdev->pdata = pdev->dev.platform_data;
if (pcdev->pdata)
pcdev->mclk = pcdev->pdata->mclk_10khz * 10000;
if (!pcdev->mclk) {
dev_warn(&pdev->dev,
"mclk_10khz == 0! Please, fix your platform data. "
"Using default 20MHz\n");
pcdev->mclk = 20000000;
}
INIT_LIST_HEAD(&pcdev->capture);
spin_lock_init(&pcdev->lock);
/*
* Request the regions.
*/
if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME)) {
err = -EBUSY;
goto exit_kfree;
}
base = ioremap(res->start, resource_size(res));
if (!base) {
err = -ENOMEM;
goto exit_release;
}
pcdev->irq = irq;
pcdev->base = base;
/* request dma */
pcdev->dma_chan = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_HIGH);
if (pcdev->dma_chan < 0) {
dev_err(&pdev->dev, "Can't request DMA for MX1 CSI\n");
err = -EBUSY;
goto exit_iounmap;
}
dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_chan);
imx_dma_setup_handlers(pcdev->dma_chan, mx1_camera_dma_irq, NULL,
pcdev);
imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO,
IMX_DMA_MEMSIZE_32, DMA_REQ_CSI_R, 0);
/* burst length : 16 words = 64 bytes */
imx_dma_config_burstlen(pcdev->dma_chan, 0);
/* request irq */
err = claim_fiq(&fh);
if (err) {
dev_err(&pdev->dev, "Camera interrupt register failed \n");
goto exit_free_dma;
}
set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end -
&mx1_camera_sof_fiq_start);
regs.ARM_r8 = DMA_BASE + DMA_DIMR;
regs.ARM_r9 = DMA_BASE + DMA_CCR(pcdev->dma_chan);
regs.ARM_r10 = (long)pcdev->base + CSICR1;
regs.ARM_fp = (long)pcdev->base + CSISR;
regs.ARM_sp = 1 << pcdev->dma_chan;
set_fiq_regs(&regs);
mxc_set_irq_fiq(irq, 1);
enable_fiq(irq);
pcdev->soc_host.drv_name = DRIVER_NAME;
pcdev->soc_host.ops = &mx1_soc_camera_host_ops;
pcdev->soc_host.priv = pcdev;
pcdev->soc_host.dev = &pdev->dev;
pcdev->soc_host.nr = pdev->id;
err = soc_camera_host_register(&pcdev->soc_host);
if (err)
goto exit_free_irq;
dev_info(&pdev->dev, "MX1 Camera driver loaded\n");
return 0;
exit_free_irq:
disable_fiq(irq);
mxc_set_irq_fiq(irq, 0);
release_fiq(&fh);
exit_free_dma:
imx_dma_free(pcdev->dma_chan);
exit_iounmap:
iounmap(base);
exit_release:
release_mem_region(res->start, resource_size(res));
exit_kfree:
kfree(pcdev);
exit_put_clk:
clk_put(clk);
exit:
return err;
}
static int __exit mx1_camera_remove(struct platform_device *pdev)
{
struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
struct mx1_camera_dev *pcdev = container_of(soc_host,
struct mx1_camera_dev, soc_host);
struct resource *res;
imx_dma_free(pcdev->dma_chan);
disable_fiq(pcdev->irq);
mxc_set_irq_fiq(pcdev->irq, 0);
release_fiq(&fh);
clk_put(pcdev->clk);
soc_camera_host_unregister(soc_host);
iounmap(pcdev->base);
res = pcdev->res;
release_mem_region(res->start, resource_size(res));
kfree(pcdev);
dev_info(&pdev->dev, "MX1 Camera driver unloaded\n");
return 0;
}
static struct platform_driver mx1_camera_driver = {
.driver = {
.name = DRIVER_NAME,
},
.remove = __exit_p(mx1_camera_remove),
};
static int __init mx1_camera_init(void)
{
return platform_driver_probe(&mx1_camera_driver, mx1_camera_probe);
}
static void __exit mx1_camera_exit(void)
{
return platform_driver_unregister(&mx1_camera_driver);
}
module_init(mx1_camera_init);
module_exit(mx1_camera_exit);
MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver");
MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" DRIVER_NAME);