AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-18 17:17:54 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
2db286d736
linux_dsm_epyc7002/arch/arm/boot/dts/imx51-ts4800.dts
Marco Franchi ad00e080eb ARM: dts: imx: Add memory node unit name 
Fix the following warnings from dtc by adding the unit name to memory
nodes:

Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name

Converted using the following command:

perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"`

The files below were manually fixed:
-imx1-ads.dts
-imx1-apf9328.dts
-imx6q-pistachio.dts

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12 21:13:14 +08:00

330 lines
7.3 KiB
Plaintext
Raw Blame History

/*
* Copyright 2015 Savoir-faire Linux
*
* This device tree is based on imx51-babbage.dts
*
* Licensed under the X11 license or the GPL v2 (or later)
*/
/dts-v1/;
#include "imx51.dtsi"
/ {
model = "Technologic Systems TS-4800";
compatible = "technologic,imx51-ts4800", "fsl,imx51";
chosen {
stdout-path = &uart1;
};
memory@90000000 {
reg = <0x90000000 0x10000000>;
};
clocks {
ckih1 {
clock-frequency = <22579200>;
};
ckih2 {
clock-frequency = <24576000>;
};
};
backlight_reg: regulator-backlight {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_lcd>;
regulator-name = "enable_lcd_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 78770>;
brightness-levels = <0 150 200 255>;
default-brightness-level = <1>;
power-supply = <&backlight_reg>;
};
display1: disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd>;
display-timings {
800x480p60 {
native-mode;
clock-frequency = <30066000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <50>;
hback-porch = <70>;
hsync-len = <50>;
vback-porch = <0>;
vfront-porch = <0>;
vsync-len = <50>;
};
};
port {
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp1>;
};
};
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
phy-reset-duration = <1>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
rtc: m41t00@68 {
compatible = "st,m41t00";
reg = <0x68>;
};
};
&ipu_di0_disp1 {
remote-endpoint = <&display0_in>;
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm_backlight>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&weim {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weim>;
status = "okay";
fpga@0 {
compatible = "simple-bus";
fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
0x00000000 0x1c092480 0x00000000>;
reg = <0 0x0000000 0x1d000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0x1d000>;
syscon: syscon@10000 {
compatible = "syscon", "simple-mfd";
reg = <0x10000 0x3d>;
reg-io-width = <2>;
wdt {
compatible = "technologic,ts4800-wdt";
syscon = <&syscon 0xe>;
};
};
touchscreen@12000 {
compatible = "technologic,ts4800-ts";
reg = <0x12000 0x1000>;
syscon = <&syscon 0x10 6>;
};
fpga_irqc: fpga-irqc@15000 {
compatible = "technologic,ts4800-irqc";
reg = <0x15000 0x1000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_interrupt_fpga>;
interrupt-parent = <&gpio2>;
interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
};
can@1a000 {
compatible = "technologic,sja1000";
reg = <0x1a000 0x100>;
interrupt-parent = <&fpga_irqc>;
interrupts = <1>;
reg-io-width = <2>;
nxp,tx-output-config = <0x06>;
nxp,external-clock-frequency = <24000000>;
};
};
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
>;
};
pinctrl_enable_lcd: enablelcdgrp {
fsl,pins = <
MX51_PAD_CSI2_D12__GPIO4_9 0x1c5
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
MX51_PAD_GPIO1_0__GPIO1_0 0x100
MX51_PAD_GPIO1_1__GPIO1_1 0x100
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5
MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085
MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085
MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085
MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180
MX51_PAD_EIM_CS5__FEC_CRS 0x00000180
MX51_PAD_DISP2_DAT10__FEC_COL 0x00000180
MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x00000180
MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x00002180
MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x00002004
MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004
MX51_PAD_DI2_PIN2__FEC_MDC 0x00002004
MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x00002004
MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x00002004
MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x00002004
MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x00002004
MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x00002180
MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x000020a4
MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
>;
};
pinctrl_interrupt_fpga: fpgaicgrp {
fsl,pins = <
MX51_PAD_EIM_D27__GPIO2_9 0xe5
>;
};
pinctrl_lcd: lcdgrp {
fsl,pins = <
MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
MX51_PAD_DI_GP4__DI2_PIN15 0x5
>;
};
pinctrl_pwm_backlight: backlightgrp {
fsl,pins = <
MX51_PAD_GPIO1_2__PWM1_PWMO 0x80000000
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX51_PAD_EIM_D25__UART3_RXD 0x1c5
MX51_PAD_EIM_D26__UART3_TXD 0x1c5
>;
};
pinctrl_weim: weimgrp {
fsl,pins = <
MX51_PAD_EIM_DTACK__EIM_DTACK 0x85
MX51_PAD_EIM_CS0__EIM_CS0 0x0
MX51_PAD_EIM_CS1__EIM_CS1 0x0
MX51_PAD_EIM_EB0__EIM_EB0 0x85
MX51_PAD_EIM_EB1__EIM_EB1 0x85
MX51_PAD_EIM_OE__EIM_OE 0x85
MX51_PAD_EIM_LBA__EIM_LBA 0x85
>;
};
};
Reference in New Issue View Git Blame Copy Permalink