mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 00:15:04 +07:00
2d24b532f9
These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
197 lines
5.4 KiB
C
197 lines
5.4 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* m520x.c -- platform support for ColdFire 520x based boards
|
|
*
|
|
* Copyright (C) 2005, Freescale (www.freescale.com)
|
|
* Copyright (C) 2005, Intec Automation (mike@steroidmicros.com)
|
|
* Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfclk.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
|
|
DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
|
|
DEFINE_CLK(0, "edma", 17, MCF_CLK);
|
|
DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
|
|
DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
|
|
DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
|
|
|
|
DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK);
|
|
DEFINE_CLK(0, "pll.0", 36, MCF_CLK);
|
|
DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "sdram.0", 42, MCF_CLK);
|
|
|
|
struct clk *mcf_clks[] = {
|
|
&__clk_0_2, /* flexbus */
|
|
&__clk_0_12, /* fec.0 */
|
|
&__clk_0_17, /* edma */
|
|
&__clk_0_18, /* intc.0 */
|
|
&__clk_0_21, /* iack.0 */
|
|
&__clk_0_22, /* imx1-i2c.0 */
|
|
&__clk_0_23, /* mcfqspi.0 */
|
|
&__clk_0_24, /* mcfuart.0 */
|
|
&__clk_0_25, /* mcfuart.1 */
|
|
&__clk_0_26, /* mcfuart.2 */
|
|
&__clk_0_28, /* mcftmr.0 */
|
|
&__clk_0_29, /* mcftmr.1 */
|
|
&__clk_0_30, /* mcftmr.2 */
|
|
&__clk_0_31, /* mcftmr.3 */
|
|
|
|
&__clk_0_32, /* mcfpit.0 */
|
|
&__clk_0_33, /* mcfpit.1 */
|
|
&__clk_0_34, /* mcfeport.0 */
|
|
&__clk_0_35, /* mcfwdt.0 */
|
|
&__clk_0_36, /* pll.0 */
|
|
&__clk_0_40, /* sys.0 */
|
|
&__clk_0_41, /* gpio.0 */
|
|
&__clk_0_42, /* sdram.0 */
|
|
NULL,
|
|
};
|
|
|
|
static struct clk * const enable_clks[] __initconst = {
|
|
&__clk_0_2, /* flexbus */
|
|
&__clk_0_18, /* intc.0 */
|
|
&__clk_0_21, /* iack.0 */
|
|
&__clk_0_24, /* mcfuart.0 */
|
|
&__clk_0_25, /* mcfuart.1 */
|
|
&__clk_0_26, /* mcfuart.2 */
|
|
|
|
&__clk_0_32, /* mcfpit.0 */
|
|
&__clk_0_33, /* mcfpit.1 */
|
|
&__clk_0_34, /* mcfeport.0 */
|
|
&__clk_0_36, /* pll.0 */
|
|
&__clk_0_40, /* sys.0 */
|
|
&__clk_0_41, /* gpio.0 */
|
|
&__clk_0_42, /* sdram.0 */
|
|
};
|
|
|
|
static struct clk * const disable_clks[] __initconst = {
|
|
&__clk_0_12, /* fec.0 */
|
|
&__clk_0_17, /* edma */
|
|
&__clk_0_22, /* imx1-i2c.0 */
|
|
&__clk_0_23, /* mcfqspi.0 */
|
|
&__clk_0_28, /* mcftmr.0 */
|
|
&__clk_0_29, /* mcftmr.1 */
|
|
&__clk_0_30, /* mcftmr.2 */
|
|
&__clk_0_31, /* mcftmr.3 */
|
|
&__clk_0_35, /* mcfwdt.0 */
|
|
};
|
|
|
|
|
|
static void __init m520x_clk_init(void)
|
|
{
|
|
unsigned i;
|
|
|
|
/* make sure these clocks are enabled */
|
|
for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
|
|
__clk_init_enabled(enable_clks[i]);
|
|
/* make sure these clocks are disabled */
|
|
for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
|
|
__clk_init_disabled(disable_clks[i]);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m520x_qspi_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
u16 par;
|
|
/* setup Port QS for QSPI with gpio CS control */
|
|
writeb(0x3f, MCF_GPIO_PAR_QSPI);
|
|
/* make U1CTS and U2RTS gpio for cs_control */
|
|
par = readw(MCF_GPIO_PAR_UART);
|
|
par &= 0x00ff;
|
|
writew(par, MCF_GPIO_PAR_UART);
|
|
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m520x_i2c_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_I2C_IMX)
|
|
u8 par;
|
|
|
|
/* setup Port FECI2C Pin Assignment Register for I2C */
|
|
/* set PAR_SCL to SCL and PAR_SDA to SDA */
|
|
par = readb(MCF_GPIO_PAR_FECI2C);
|
|
par |= 0x0f;
|
|
writeb(par, MCF_GPIO_PAR_FECI2C);
|
|
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m520x_uarts_init(void)
|
|
{
|
|
u16 par;
|
|
u8 par2;
|
|
|
|
/* UART0 and UART1 GPIO pin setup */
|
|
par = readw(MCF_GPIO_PAR_UART);
|
|
par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
|
|
par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
|
|
writew(par, MCF_GPIO_PAR_UART);
|
|
|
|
/* UART1 GPIO pin setup */
|
|
par2 = readb(MCF_GPIO_PAR_FECI2C);
|
|
par2 &= ~0x0F;
|
|
par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
|
|
MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
|
|
writeb(par2, MCF_GPIO_PAR_FECI2C);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m520x_fec_init(void)
|
|
{
|
|
u8 v;
|
|
|
|
/* Set multi-function pins to ethernet mode */
|
|
v = readb(MCF_GPIO_PAR_FEC);
|
|
writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
|
|
|
|
v = readb(MCF_GPIO_PAR_FECI2C);
|
|
writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
mach_sched_init = hw_timer_init;
|
|
m520x_clk_init();
|
|
m520x_uarts_init();
|
|
m520x_fec_init();
|
|
m520x_qspi_init();
|
|
m520x_i2c_init();
|
|
}
|
|
|
|
/***************************************************************************/
|