mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 10:16:43 +07:00
5085f3ff45
When hotplug CPU is enabled, we need to keep the list of supported CPUs, their setup functions, and __lookup_processor_type in place so that we can find and initialize secondary CPUs. Move these into the __CPUINIT section. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
251 lines
5.7 KiB
ArmAsm
251 lines
5.7 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mm/proc-sa110.S
|
|
*
|
|
* Copyright (C) 1997-2002 Russell King
|
|
* hacked for non-paged-MM by Hyok S. Choi, 2003.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* MMU functions for SA110
|
|
*
|
|
* These are the low level assembler for performing cache and TLB
|
|
* functions on the StrongARM-110.
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
/*
|
|
* the cache line size of the I and D cache
|
|
*/
|
|
#define DCACHELINESIZE 32
|
|
|
|
.text
|
|
|
|
/*
|
|
* cpu_sa110_proc_init()
|
|
*/
|
|
ENTRY(cpu_sa110_proc_init)
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_sa110_proc_fin()
|
|
*/
|
|
ENTRY(cpu_sa110_proc_fin)
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
|
|
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
|
|
bic r0, r0, #0x1000 @ ...i............
|
|
bic r0, r0, #0x000e @ ............wca.
|
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
|
mov pc, lr
|
|
|
|
/*
|
|
* cpu_sa110_reset(loc)
|
|
*
|
|
* Perform a soft reset of the system. Put the CPU into the
|
|
* same state as it would be if it had been reset, and branch
|
|
* to what would be the reset vector.
|
|
*
|
|
* loc: location to jump to for soft reset
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_sa110_reset)
|
|
mov ip, #0
|
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
|
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
|
#endif
|
|
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
bic ip, ip, #0x000f @ ............wcam
|
|
bic ip, ip, #0x1100 @ ...i...s........
|
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
|
mov pc, r0
|
|
|
|
/*
|
|
* cpu_sa110_do_idle(type)
|
|
*
|
|
* Cause the processor to idle
|
|
*
|
|
* type: call type:
|
|
* 0 = slow idle
|
|
* 1 = fast idle
|
|
* 2 = switch to slow processor clock
|
|
* 3 = switch to fast processor clock
|
|
*/
|
|
.align 5
|
|
|
|
ENTRY(cpu_sa110_do_idle)
|
|
mcr p15, 0, ip, c15, c2, 2 @ disable clock switching
|
|
ldr r1, =UNCACHEABLE_ADDR @ load from uncacheable loc
|
|
ldr r1, [r1, #0] @ force switch to MCLK
|
|
mov r0, r0 @ safety
|
|
mov r0, r0 @ safety
|
|
mov r0, r0 @ safety
|
|
mcr p15, 0, r0, c15, c8, 2 @ Wait for interrupt, cache aligned
|
|
mov r0, r0 @ safety
|
|
mov r0, r0 @ safety
|
|
mov r0, r0 @ safety
|
|
mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
|
|
mov pc, lr
|
|
|
|
/* ================================= CACHE ================================ */
|
|
|
|
/*
|
|
* cpu_sa110_dcache_clean_area(addr,sz)
|
|
*
|
|
* Clean the specified entry of any caches such that the MMU
|
|
* translation fetches will obtain correct data.
|
|
*
|
|
* addr: cache-unaligned virtual address
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_sa110_dcache_clean_area)
|
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
add r0, r0, #DCACHELINESIZE
|
|
subs r1, r1, #DCACHELINESIZE
|
|
bhi 1b
|
|
mov pc, lr
|
|
|
|
/* =============================== PageTable ============================== */
|
|
|
|
/*
|
|
* cpu_sa110_switch_mm(pgd)
|
|
*
|
|
* Set the translation base pointer to be as described by pgd.
|
|
*
|
|
* pgd: new page tables
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_sa110_switch_mm)
|
|
#ifdef CONFIG_MMU
|
|
str lr, [sp, #-4]!
|
|
bl v4wb_flush_kern_cache_all @ clears IP
|
|
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
|
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
|
ldr pc, [sp], #4
|
|
#else
|
|
mov pc, lr
|
|
#endif
|
|
|
|
/*
|
|
* cpu_sa110_set_pte_ext(ptep, pte, ext)
|
|
*
|
|
* Set a PTE and flush it out
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_sa110_set_pte_ext)
|
|
#ifdef CONFIG_MMU
|
|
armv3_set_pte_ext wc_disable=0
|
|
mov r0, r0
|
|
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
|
#endif
|
|
mov pc, lr
|
|
|
|
__CPUINIT
|
|
|
|
.type __sa110_setup, #function
|
|
__sa110_setup:
|
|
mov r10, #0
|
|
mcr p15, 0, r10, c7, c7 @ invalidate I,D caches on v4
|
|
mcr p15, 0, r10, c7, c10, 4 @ drain write buffer on v4
|
|
#ifdef CONFIG_MMU
|
|
mcr p15, 0, r10, c8, c7 @ invalidate I,D TLBs on v4
|
|
#endif
|
|
|
|
adr r5, sa110_crval
|
|
ldmia r5, {r5, r6}
|
|
mrc p15, 0, r0, c1, c0 @ get control register v4
|
|
bic r0, r0, r5
|
|
orr r0, r0, r6
|
|
mov pc, lr
|
|
.size __sa110_setup, . - __sa110_setup
|
|
|
|
/*
|
|
* R
|
|
* .RVI ZFRS BLDP WCAM
|
|
* ..01 0001 ..11 1101
|
|
*
|
|
*/
|
|
.type sa110_crval, #object
|
|
sa110_crval:
|
|
crval clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
|
|
|
|
__INITDATA
|
|
|
|
/*
|
|
* Purpose : Function pointers used to access above functions - all calls
|
|
* come through these
|
|
*/
|
|
|
|
.type sa110_processor_functions, #object
|
|
ENTRY(sa110_processor_functions)
|
|
.word v4_early_abort
|
|
.word legacy_pabort
|
|
.word cpu_sa110_proc_init
|
|
.word cpu_sa110_proc_fin
|
|
.word cpu_sa110_reset
|
|
.word cpu_sa110_do_idle
|
|
.word cpu_sa110_dcache_clean_area
|
|
.word cpu_sa110_switch_mm
|
|
.word cpu_sa110_set_pte_ext
|
|
.size sa110_processor_functions, . - sa110_processor_functions
|
|
|
|
.section ".rodata"
|
|
|
|
.type cpu_arch_name, #object
|
|
cpu_arch_name:
|
|
.asciz "armv4"
|
|
.size cpu_arch_name, . - cpu_arch_name
|
|
|
|
.type cpu_elf_name, #object
|
|
cpu_elf_name:
|
|
.asciz "v4"
|
|
.size cpu_elf_name, . - cpu_elf_name
|
|
|
|
.type cpu_sa110_name, #object
|
|
cpu_sa110_name:
|
|
.asciz "StrongARM-110"
|
|
.size cpu_sa110_name, . - cpu_sa110_name
|
|
|
|
.align
|
|
|
|
.section ".proc.info.init", #alloc, #execinstr
|
|
|
|
.type __sa110_proc_info,#object
|
|
__sa110_proc_info:
|
|
.long 0x4401a100
|
|
.long 0xfffffff0
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_BUFFERABLE | \
|
|
PMD_SECT_CACHEABLE | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
.long PMD_TYPE_SECT | \
|
|
PMD_SECT_AP_WRITE | \
|
|
PMD_SECT_AP_READ
|
|
b __sa110_setup
|
|
.long cpu_arch_name
|
|
.long cpu_elf_name
|
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
|
|
.long cpu_sa110_name
|
|
.long sa110_processor_functions
|
|
.long v4wb_tlb_fns
|
|
.long v4wb_user_fns
|
|
.long v4wb_cache_fns
|
|
.size __sa110_proc_info, . - __sa110_proc_info
|