mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-17 15:47:39 +07:00
2cc56f3028
We use incorrect logic to decide whether a PCIe hotplug controller generates command completion events.5808639bfa
("pciehp: fix slow probing") assumed that the Slot Status "Command Completed" bit was set only for commands affecting slot power, indicators, or electromechanical interlock. That assumption is false: per sec. 6.7.3.2 of PCIe spec r3.0, a write targeting any portion of the Slot Control register is a command, and (if command completed events are supported) software must wait for a command to complete before issuing the next command.5808639bfa
was to fix boot-time timeouts (see bugzilla below) on a Lenovo Thinkpad R61 with an Intel hotplug controller. The controller probably has the Intel CF118 erratum, which means it doesn't report Command Completed unless the Slot Control power, indicator, or interlock bits are changed. This causes a timeout because pciehp always waits for Command Complete (if supported), regardless of which bits are changed. Remove the incorrect logic because the timeouts have been addressed differently by these changes: PCI: pciehp: Wait for hotplug command completion lazily PCI: pciehp: Compute timeout from hotplug command start time Link: https://bugzilla.kernel.org/show_bug.cgi?id=10751 Tested-by: Rajat Jain <rajatxjain@gmail.com> (IDT 807a controller) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
828 lines
22 KiB
C
828 lines
22 KiB
C
/*
|
|
* PCI Express PCI Hot Plug Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/time.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "../pci.h"
|
|
#include "pciehp.h"
|
|
|
|
static inline struct pci_dev *ctrl_dev(struct controller *ctrl)
|
|
{
|
|
return ctrl->pcie->port;
|
|
}
|
|
|
|
static irqreturn_t pcie_isr(int irq, void *dev_id);
|
|
static void start_int_poll_timer(struct controller *ctrl, int sec);
|
|
|
|
/* This is the interrupt polling timeout function. */
|
|
static void int_poll_timeout(unsigned long data)
|
|
{
|
|
struct controller *ctrl = (struct controller *)data;
|
|
|
|
/* Poll for interrupt events. regs == NULL => polling */
|
|
pcie_isr(0, ctrl);
|
|
|
|
init_timer(&ctrl->poll_timer);
|
|
if (!pciehp_poll_time)
|
|
pciehp_poll_time = 2; /* default polling interval is 2 sec */
|
|
|
|
start_int_poll_timer(ctrl, pciehp_poll_time);
|
|
}
|
|
|
|
/* This function starts the interrupt polling timer. */
|
|
static void start_int_poll_timer(struct controller *ctrl, int sec)
|
|
{
|
|
/* Clamp to sane value */
|
|
if ((sec <= 0) || (sec > 60))
|
|
sec = 2;
|
|
|
|
ctrl->poll_timer.function = &int_poll_timeout;
|
|
ctrl->poll_timer.data = (unsigned long)ctrl;
|
|
ctrl->poll_timer.expires = jiffies + sec * HZ;
|
|
add_timer(&ctrl->poll_timer);
|
|
}
|
|
|
|
static inline int pciehp_request_irq(struct controller *ctrl)
|
|
{
|
|
int retval, irq = ctrl->pcie->irq;
|
|
|
|
/* Install interrupt polling timer. Start with 10 sec delay */
|
|
if (pciehp_poll_mode) {
|
|
init_timer(&ctrl->poll_timer);
|
|
start_int_poll_timer(ctrl, 10);
|
|
return 0;
|
|
}
|
|
|
|
/* Installs the interrupt handler */
|
|
retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl);
|
|
if (retval)
|
|
ctrl_err(ctrl, "Cannot get irq %d for the hotplug controller\n",
|
|
irq);
|
|
return retval;
|
|
}
|
|
|
|
static inline void pciehp_free_irq(struct controller *ctrl)
|
|
{
|
|
if (pciehp_poll_mode)
|
|
del_timer_sync(&ctrl->poll_timer);
|
|
else
|
|
free_irq(ctrl->pcie->irq, ctrl);
|
|
}
|
|
|
|
static int pcie_poll_cmd(struct controller *ctrl, int timeout)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (slot_status & PCI_EXP_SLTSTA_CC) {
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_CC);
|
|
return 1;
|
|
}
|
|
while (timeout > 0) {
|
|
msleep(10);
|
|
timeout -= 10;
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (slot_status & PCI_EXP_SLTSTA_CC) {
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_CC);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0; /* timeout */
|
|
}
|
|
|
|
static void pcie_wait_cmd(struct controller *ctrl)
|
|
{
|
|
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
|
|
unsigned long duration = msecs_to_jiffies(msecs);
|
|
unsigned long cmd_timeout = ctrl->cmd_started + duration;
|
|
unsigned long now, timeout;
|
|
int rc;
|
|
|
|
/*
|
|
* If the controller does not generate notifications for command
|
|
* completions, we never need to wait between writes.
|
|
*/
|
|
if (ctrl->no_cmd_complete)
|
|
return;
|
|
|
|
if (!ctrl->cmd_busy)
|
|
return;
|
|
|
|
/*
|
|
* Even if the command has already timed out, we want to call
|
|
* pcie_poll_cmd() so it can clear PCI_EXP_SLTSTA_CC.
|
|
*/
|
|
now = jiffies;
|
|
if (time_before_eq(cmd_timeout, now))
|
|
timeout = 1;
|
|
else
|
|
timeout = cmd_timeout - now;
|
|
|
|
if (ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE &&
|
|
ctrl->slot_ctrl & PCI_EXP_SLTCTL_CCIE)
|
|
rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout);
|
|
else
|
|
rc = pcie_poll_cmd(ctrl, timeout);
|
|
|
|
/*
|
|
* Controllers with errata like Intel CF118 don't generate
|
|
* completion notifications unless the power/indicator/interlock
|
|
* control bits are changed. On such controllers, we'll emit this
|
|
* timeout message when we wait for completion of commands that
|
|
* don't change those bits, e.g., commands that merely enable
|
|
* interrupts.
|
|
*/
|
|
if (!rc)
|
|
ctrl_info(ctrl, "Timeout on hotplug command %#010x (issued %u msec ago)\n",
|
|
ctrl->slot_ctrl,
|
|
jiffies_to_msecs(now - ctrl->cmd_started));
|
|
}
|
|
|
|
/**
|
|
* pcie_write_cmd - Issue controller command
|
|
* @ctrl: controller to which the command is issued
|
|
* @cmd: command value written to slot control register
|
|
* @mask: bitmask of slot control register to be modified
|
|
*/
|
|
static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
mutex_lock(&ctrl->ctrl_lock);
|
|
|
|
/* Wait for any previous command that might still be in progress */
|
|
pcie_wait_cmd(ctrl);
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
slot_ctrl &= ~mask;
|
|
slot_ctrl |= (cmd & mask);
|
|
ctrl->cmd_busy = 1;
|
|
smp_mb();
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, slot_ctrl);
|
|
ctrl->cmd_started = jiffies;
|
|
ctrl->slot_ctrl = slot_ctrl;
|
|
|
|
mutex_unlock(&ctrl->ctrl_lock);
|
|
}
|
|
|
|
bool pciehp_check_link_active(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 lnk_status;
|
|
bool ret;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
|
|
ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
|
|
|
|
if (ret)
|
|
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __pcie_wait_link_active(struct controller *ctrl, bool active)
|
|
{
|
|
int timeout = 1000;
|
|
|
|
if (pciehp_check_link_active(ctrl) == active)
|
|
return;
|
|
while (timeout > 0) {
|
|
msleep(10);
|
|
timeout -= 10;
|
|
if (pciehp_check_link_active(ctrl) == active)
|
|
return;
|
|
}
|
|
ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n",
|
|
active ? "set" : "cleared");
|
|
}
|
|
|
|
static void pcie_wait_link_active(struct controller *ctrl)
|
|
{
|
|
__pcie_wait_link_active(ctrl, true);
|
|
}
|
|
|
|
static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
|
|
{
|
|
u32 l;
|
|
int count = 0;
|
|
int delay = 1000, step = 20;
|
|
bool found = false;
|
|
|
|
do {
|
|
found = pci_bus_read_dev_vendor_id(bus, devfn, &l, 0);
|
|
count++;
|
|
|
|
if (found)
|
|
break;
|
|
|
|
msleep(step);
|
|
delay -= step;
|
|
} while (delay > 0);
|
|
|
|
if (count > 1 && pciehp_debug)
|
|
printk(KERN_DEBUG "pci %04x:%02x:%02x.%d id reading try %d times with interval %d ms to get %08x\n",
|
|
pci_domain_nr(bus), bus->number, PCI_SLOT(devfn),
|
|
PCI_FUNC(devfn), count, step, l);
|
|
|
|
return found;
|
|
}
|
|
|
|
int pciehp_check_link_status(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
bool found;
|
|
u16 lnk_status;
|
|
|
|
/*
|
|
* Data Link Layer Link Active Reporting must be capable for
|
|
* hot-plug capable downstream port. But old controller might
|
|
* not implement it. In this case, we wait for 1000 ms.
|
|
*/
|
|
if (ctrl->link_active_reporting)
|
|
pcie_wait_link_active(ctrl);
|
|
else
|
|
msleep(1000);
|
|
|
|
/* wait 100ms before read pci conf, and try in 1s */
|
|
msleep(100);
|
|
found = pci_bus_check_dev(ctrl->pcie->port->subordinate,
|
|
PCI_DEVFN(0, 0));
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
|
|
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
|
|
if ((lnk_status & PCI_EXP_LNKSTA_LT) ||
|
|
!(lnk_status & PCI_EXP_LNKSTA_NLW)) {
|
|
ctrl_err(ctrl, "Link Training Error occurs\n");
|
|
return -1;
|
|
}
|
|
|
|
pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
|
|
|
|
if (!found)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __pciehp_link_set(struct controller *ctrl, bool enable)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 lnk_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &lnk_ctrl);
|
|
|
|
if (enable)
|
|
lnk_ctrl &= ~PCI_EXP_LNKCTL_LD;
|
|
else
|
|
lnk_ctrl |= PCI_EXP_LNKCTL_LD;
|
|
|
|
pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, lnk_ctrl);
|
|
ctrl_dbg(ctrl, "%s: lnk_ctrl = %x\n", __func__, lnk_ctrl);
|
|
return 0;
|
|
}
|
|
|
|
static int pciehp_link_enable(struct controller *ctrl)
|
|
{
|
|
return __pciehp_link_set(ctrl, true);
|
|
}
|
|
|
|
void pciehp_get_attention_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x, value read %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
|
|
|
|
switch (slot_ctrl & PCI_EXP_SLTCTL_AIC) {
|
|
case PCI_EXP_SLTCTL_ATTN_IND_ON:
|
|
*status = 1; /* On */
|
|
break;
|
|
case PCI_EXP_SLTCTL_ATTN_IND_BLINK:
|
|
*status = 2; /* Blink */
|
|
break;
|
|
case PCI_EXP_SLTCTL_ATTN_IND_OFF:
|
|
*status = 0; /* Off */
|
|
break;
|
|
default:
|
|
*status = 0xFF;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void pciehp_get_power_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_ctrl;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x value read %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
|
|
|
|
switch (slot_ctrl & PCI_EXP_SLTCTL_PCC) {
|
|
case PCI_EXP_SLTCTL_PWR_ON:
|
|
*status = 1; /* On */
|
|
break;
|
|
case PCI_EXP_SLTCTL_PWR_OFF:
|
|
*status = 0; /* Off */
|
|
break;
|
|
default:
|
|
*status = 0xFF;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void pciehp_get_latch_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(slot->ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
*status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS);
|
|
}
|
|
|
|
void pciehp_get_adapter_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(slot->ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
*status = !!(slot_status & PCI_EXP_SLTSTA_PDS);
|
|
}
|
|
|
|
int pciehp_query_power_fault(struct slot *slot)
|
|
{
|
|
struct pci_dev *pdev = ctrl_dev(slot->ctrl);
|
|
u16 slot_status;
|
|
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
return !!(slot_status & PCI_EXP_SLTSTA_PFD);
|
|
}
|
|
|
|
void pciehp_set_attention_status(struct slot *slot, u8 value)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_cmd;
|
|
|
|
if (!ATTN_LED(ctrl))
|
|
return;
|
|
|
|
switch (value) {
|
|
case 0: /* turn off */
|
|
slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_OFF;
|
|
break;
|
|
case 1: /* turn on */
|
|
slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_ON;
|
|
break;
|
|
case 2: /* turn blink */
|
|
slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_BLINK;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
|
|
pcie_write_cmd(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC);
|
|
}
|
|
|
|
void pciehp_green_led_on(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
if (!PWR_LED(ctrl))
|
|
return;
|
|
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON, PCI_EXP_SLTCTL_PIC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_IND_ON);
|
|
}
|
|
|
|
void pciehp_green_led_off(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
if (!PWR_LED(ctrl))
|
|
return;
|
|
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF, PCI_EXP_SLTCTL_PIC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_IND_OFF);
|
|
}
|
|
|
|
void pciehp_green_led_blink(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
if (!PWR_LED(ctrl))
|
|
return;
|
|
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK, PCI_EXP_SLTCTL_PIC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_IND_BLINK);
|
|
}
|
|
|
|
int pciehp_power_on_slot(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 slot_status;
|
|
int retval;
|
|
|
|
/* Clear sticky power-fault bit from previous power failures */
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
|
|
if (slot_status & PCI_EXP_SLTSTA_PFD)
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_PFD);
|
|
ctrl->power_fault_detected = 0;
|
|
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_ON);
|
|
|
|
retval = pciehp_link_enable(ctrl);
|
|
if (retval)
|
|
ctrl_err(ctrl, "%s: Can not enable the link!\n", __func__);
|
|
|
|
return retval;
|
|
}
|
|
|
|
void pciehp_power_off_slot(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
|
|
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_OFF, PCI_EXP_SLTCTL_PCC);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
|
|
pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL,
|
|
PCI_EXP_SLTCTL_PWR_OFF);
|
|
}
|
|
|
|
static irqreturn_t pcie_isr(int irq, void *dev_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *)dev_id;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
struct slot *slot = ctrl->slot;
|
|
u16 detected, intr_loc;
|
|
|
|
/*
|
|
* In order to guarantee that all interrupt events are
|
|
* serviced, we need to re-inspect Slot Status register after
|
|
* clearing what is presumed to be the last pending interrupt.
|
|
*/
|
|
intr_loc = 0;
|
|
do {
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &detected);
|
|
|
|
detected &= (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
|
|
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
|
|
PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC);
|
|
detected &= ~intr_loc;
|
|
intr_loc |= detected;
|
|
if (!intr_loc)
|
|
return IRQ_NONE;
|
|
if (detected)
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
intr_loc);
|
|
} while (detected);
|
|
|
|
ctrl_dbg(ctrl, "%s: intr_loc %x\n", __func__, intr_loc);
|
|
|
|
/* Check Command Complete Interrupt Pending */
|
|
if (intr_loc & PCI_EXP_SLTSTA_CC) {
|
|
ctrl->cmd_busy = 0;
|
|
smp_mb();
|
|
wake_up(&ctrl->queue);
|
|
}
|
|
|
|
if (!(intr_loc & ~PCI_EXP_SLTSTA_CC))
|
|
return IRQ_HANDLED;
|
|
|
|
/* Check MRL Sensor Changed */
|
|
if (intr_loc & PCI_EXP_SLTSTA_MRLSC)
|
|
pciehp_handle_switch_change(slot);
|
|
|
|
/* Check Attention Button Pressed */
|
|
if (intr_loc & PCI_EXP_SLTSTA_ABP)
|
|
pciehp_handle_attention_button(slot);
|
|
|
|
/* Check Presence Detect Changed */
|
|
if (intr_loc & PCI_EXP_SLTSTA_PDC)
|
|
pciehp_handle_presence_change(slot);
|
|
|
|
/* Check Power Fault Detected */
|
|
if ((intr_loc & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
|
|
ctrl->power_fault_detected = 1;
|
|
pciehp_handle_power_fault(slot);
|
|
}
|
|
|
|
if (intr_loc & PCI_EXP_SLTSTA_DLLSC)
|
|
pciehp_handle_linkstate_change(slot);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
void pcie_enable_notification(struct controller *ctrl)
|
|
{
|
|
u16 cmd, mask;
|
|
|
|
/*
|
|
* TBD: Power fault detected software notification support.
|
|
*
|
|
* Power fault detected software notification is not enabled
|
|
* now, because it caused power fault detected interrupt storm
|
|
* on some machines. On those machines, power fault detected
|
|
* bit in the slot status register was set again immediately
|
|
* when it is cleared in the interrupt service routine, and
|
|
* next power fault detected interrupt was notified again.
|
|
*/
|
|
|
|
/*
|
|
* Always enable link events: thus link-up and link-down shall
|
|
* always be treated as hotplug and unplug respectively. Enable
|
|
* presence detect only if Attention Button is not present.
|
|
*/
|
|
cmd = PCI_EXP_SLTCTL_DLLSCE;
|
|
if (ATTN_BUTTN(ctrl))
|
|
cmd |= PCI_EXP_SLTCTL_ABPE;
|
|
else
|
|
cmd |= PCI_EXP_SLTCTL_PDCE;
|
|
if (MRL_SENS(ctrl))
|
|
cmd |= PCI_EXP_SLTCTL_MRLSCE;
|
|
if (!pciehp_poll_mode)
|
|
cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
|
|
|
|
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
|
|
PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE |
|
|
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
|
|
PCI_EXP_SLTCTL_DLLSCE);
|
|
|
|
pcie_write_cmd(ctrl, cmd, mask);
|
|
}
|
|
|
|
static void pcie_disable_notification(struct controller *ctrl)
|
|
{
|
|
u16 mask;
|
|
|
|
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
|
|
PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE |
|
|
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
|
|
PCI_EXP_SLTCTL_DLLSCE);
|
|
pcie_write_cmd(ctrl, 0, mask);
|
|
}
|
|
|
|
/*
|
|
* pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary
|
|
* bus reset of the bridge, but at the same time we want to ensure that it is
|
|
* not seen as a hot-unplug, followed by the hot-plug of the device. Thus,
|
|
* disable link state notification and presence detection change notification
|
|
* momentarily, if we see that they could interfere. Also, clear any spurious
|
|
* events after.
|
|
*/
|
|
int pciehp_reset_slot(struct slot *slot, int probe)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
struct pci_dev *pdev = ctrl_dev(ctrl);
|
|
u16 stat_mask = 0, ctrl_mask = 0;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
if (!ATTN_BUTTN(ctrl)) {
|
|
ctrl_mask |= PCI_EXP_SLTCTL_PDCE;
|
|
stat_mask |= PCI_EXP_SLTSTA_PDC;
|
|
}
|
|
ctrl_mask |= PCI_EXP_SLTCTL_DLLSCE;
|
|
stat_mask |= PCI_EXP_SLTSTA_DLLSC;
|
|
|
|
pcie_write_cmd(ctrl, 0, ctrl_mask);
|
|
if (pciehp_poll_mode)
|
|
del_timer_sync(&ctrl->poll_timer);
|
|
|
|
pci_reset_bridge_secondary_bus(ctrl->pcie->port);
|
|
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, stat_mask);
|
|
pcie_write_cmd(ctrl, ctrl_mask, ctrl_mask);
|
|
if (pciehp_poll_mode)
|
|
int_poll_timeout(ctrl->poll_timer.data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pcie_init_notification(struct controller *ctrl)
|
|
{
|
|
if (pciehp_request_irq(ctrl))
|
|
return -1;
|
|
pcie_enable_notification(ctrl);
|
|
ctrl->notification_enabled = 1;
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_shutdown_notification(struct controller *ctrl)
|
|
{
|
|
if (ctrl->notification_enabled) {
|
|
pcie_disable_notification(ctrl);
|
|
pciehp_free_irq(ctrl);
|
|
ctrl->notification_enabled = 0;
|
|
}
|
|
}
|
|
|
|
static int pcie_init_slot(struct controller *ctrl)
|
|
{
|
|
struct slot *slot;
|
|
|
|
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
|
|
if (!slot)
|
|
return -ENOMEM;
|
|
|
|
slot->wq = alloc_workqueue("pciehp-%u", 0, 0, PSN(ctrl));
|
|
if (!slot->wq)
|
|
goto abort;
|
|
|
|
slot->ctrl = ctrl;
|
|
mutex_init(&slot->lock);
|
|
mutex_init(&slot->hotplug_lock);
|
|
INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
|
|
ctrl->slot = slot;
|
|
return 0;
|
|
abort:
|
|
kfree(slot);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void pcie_cleanup_slot(struct controller *ctrl)
|
|
{
|
|
struct slot *slot = ctrl->slot;
|
|
cancel_delayed_work(&slot->work);
|
|
destroy_workqueue(slot->wq);
|
|
kfree(slot);
|
|
}
|
|
|
|
static inline void dbg_ctrl(struct controller *ctrl)
|
|
{
|
|
int i;
|
|
u16 reg16;
|
|
struct pci_dev *pdev = ctrl->pcie->port;
|
|
|
|
if (!pciehp_debug)
|
|
return;
|
|
|
|
ctrl_info(ctrl, "Hotplug Controller:\n");
|
|
ctrl_info(ctrl, " Seg/Bus/Dev/Func/IRQ : %s IRQ %d\n",
|
|
pci_name(pdev), pdev->irq);
|
|
ctrl_info(ctrl, " Vendor ID : 0x%04x\n", pdev->vendor);
|
|
ctrl_info(ctrl, " Device ID : 0x%04x\n", pdev->device);
|
|
ctrl_info(ctrl, " Subsystem ID : 0x%04x\n",
|
|
pdev->subsystem_device);
|
|
ctrl_info(ctrl, " Subsystem Vendor ID : 0x%04x\n",
|
|
pdev->subsystem_vendor);
|
|
ctrl_info(ctrl, " PCIe Cap offset : 0x%02x\n",
|
|
pci_pcie_cap(pdev));
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
|
if (!pci_resource_len(pdev, i))
|
|
continue;
|
|
ctrl_info(ctrl, " PCI resource [%d] : %pR\n",
|
|
i, &pdev->resource[i]);
|
|
}
|
|
ctrl_info(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
|
|
ctrl_info(ctrl, " Physical Slot Number : %d\n", PSN(ctrl));
|
|
ctrl_info(ctrl, " Attention Button : %3s\n",
|
|
ATTN_BUTTN(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Power Controller : %3s\n",
|
|
POWER_CTRL(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " MRL Sensor : %3s\n",
|
|
MRL_SENS(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Attention Indicator : %3s\n",
|
|
ATTN_LED(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Power Indicator : %3s\n",
|
|
PWR_LED(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Hot-Plug Surprise : %3s\n",
|
|
HP_SUPR_RM(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " EMI Present : %3s\n",
|
|
EMI(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Command Completed : %3s\n",
|
|
NO_CMD_CMPL(ctrl) ? "no" : "yes");
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, ®16);
|
|
ctrl_info(ctrl, "Slot Status : 0x%04x\n", reg16);
|
|
pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, ®16);
|
|
ctrl_info(ctrl, "Slot Control : 0x%04x\n", reg16);
|
|
}
|
|
|
|
#define FLAG(x, y) (((x) & (y)) ? '+' : '-')
|
|
|
|
struct controller *pcie_init(struct pcie_device *dev)
|
|
{
|
|
struct controller *ctrl;
|
|
u32 slot_cap, link_cap;
|
|
struct pci_dev *pdev = dev->port;
|
|
|
|
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
|
|
if (!ctrl) {
|
|
dev_err(&dev->device, "%s: Out of memory\n", __func__);
|
|
goto abort;
|
|
}
|
|
ctrl->pcie = dev;
|
|
pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap);
|
|
ctrl->slot_cap = slot_cap;
|
|
mutex_init(&ctrl->ctrl_lock);
|
|
init_waitqueue_head(&ctrl->queue);
|
|
dbg_ctrl(ctrl);
|
|
|
|
/*
|
|
* Controller doesn't notify of command completion if the "No
|
|
* Command Completed Support" bit is set in Slot Capabilities.
|
|
* If set, it means the controller can accept hotplug commands
|
|
* with no delay between them.
|
|
*/
|
|
if (NO_CMD_CMPL(ctrl))
|
|
ctrl->no_cmd_complete = 1;
|
|
|
|
/* Check if Data Link Layer Link Active Reporting is implemented */
|
|
pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap);
|
|
if (link_cap & PCI_EXP_LNKCAP_DLLLARC) {
|
|
ctrl_dbg(ctrl, "Link Active Reporting supported\n");
|
|
ctrl->link_active_reporting = 1;
|
|
}
|
|
|
|
/* Clear all remaining event bits in Slot Status register */
|
|
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
|
|
PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
|
|
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
|
|
PCI_EXP_SLTSTA_CC);
|
|
|
|
/* Disable software notification */
|
|
pcie_disable_notification(ctrl);
|
|
|
|
ctrl_info(ctrl, "Slot #%d AttnBtn%c AttnInd%c PwrInd%c PwrCtrl%c MRL%c Interlock%c NoCompl%c LLActRep%c\n",
|
|
(slot_cap & PCI_EXP_SLTCAP_PSN) >> 19,
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_ABP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_AIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_PIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_PCP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_MRLSP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_EIP),
|
|
FLAG(slot_cap, PCI_EXP_SLTCAP_NCCS),
|
|
FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC));
|
|
|
|
if (pcie_init_slot(ctrl))
|
|
goto abort_ctrl;
|
|
|
|
return ctrl;
|
|
|
|
abort_ctrl:
|
|
kfree(ctrl);
|
|
abort:
|
|
return NULL;
|
|
}
|
|
|
|
void pciehp_release_ctrl(struct controller *ctrl)
|
|
{
|
|
pcie_shutdown_notification(ctrl);
|
|
pcie_cleanup_slot(ctrl);
|
|
kfree(ctrl);
|
|
}
|