linux_dsm_epyc7002/drivers/net/phy/bcm-phy-lib.c
Murali Krishna Policharla ab41ca3455 net: phy: bcm7xx: add jumbo frame configuration to PHY
The BCM7XX PHY family requires special configuration to pass jumbo
frames. Do that during initial PHY setup.

Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 16:07:24 -07:00

451 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015-2017 Broadcom
*/
#include "bcm-phy-lib.h"
#include <linux/brcmphy.h>
#include <linux/export.h>
#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/ethtool.h>
#define MII_BCM_CHANNEL_WIDTH 0x2000
#define BCM_CL45VEN_EEE_ADV 0x3c
int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
{
int rc;
rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
if (rc < 0)
return rc;
return phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
}
EXPORT_SYMBOL_GPL(bcm_phy_write_exp);
int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
{
int val;
val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
if (val < 0)
return val;
val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
/* Restore default value. It's O.K. if this write fails. */
phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
return val;
}
EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
{
/* The register must be written to both the Shadow Register Select and
* the Shadow Read Register Selector
*/
phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MASK |
regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT);
return phy_read(phydev, MII_BCM54XX_AUX_CTL);
}
EXPORT_SYMBOL_GPL(bcm54xx_auxctl_read);
int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
{
return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
}
EXPORT_SYMBOL(bcm54xx_auxctl_write);
int bcm_phy_write_misc(struct phy_device *phydev,
u16 reg, u16 chl, u16 val)
{
int rc;
int tmp;
rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
if (rc < 0)
return rc;
tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
if (rc < 0)
return rc;
tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
rc = bcm_phy_write_exp(phydev, tmp, val);
return rc;
}
EXPORT_SYMBOL_GPL(bcm_phy_write_misc);
int bcm_phy_read_misc(struct phy_device *phydev,
u16 reg, u16 chl)
{
int rc;
int tmp;
rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
if (rc < 0)
return rc;
tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
if (rc < 0)
return rc;
tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
rc = bcm_phy_read_exp(phydev, tmp);
return rc;
}
EXPORT_SYMBOL_GPL(bcm_phy_read_misc);
int bcm_phy_ack_intr(struct phy_device *phydev)
{
int reg;
/* Clear pending interrupts. */
reg = phy_read(phydev, MII_BCM54XX_ISR);
if (reg < 0)
return reg;
return 0;
}
EXPORT_SYMBOL_GPL(bcm_phy_ack_intr);
int bcm_phy_config_intr(struct phy_device *phydev)
{
int reg;
reg = phy_read(phydev, MII_BCM54XX_ECR);
if (reg < 0)
return reg;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
reg &= ~MII_BCM54XX_ECR_IM;
else
reg |= MII_BCM54XX_ECR_IM;
return phy_write(phydev, MII_BCM54XX_ECR, reg);
}
EXPORT_SYMBOL_GPL(bcm_phy_config_intr);
int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow)
{
phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
}
EXPORT_SYMBOL_GPL(bcm_phy_read_shadow);
int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
u16 val)
{
return phy_write(phydev, MII_BCM54XX_SHD,
MII_BCM54XX_SHD_WRITE |
MII_BCM54XX_SHD_VAL(shadow) |
MII_BCM54XX_SHD_DATA(val));
}
EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
{
int val;
if (dll_pwr_down) {
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
if (val < 0)
return val;
val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
}
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
if (val < 0)
return val;
/* Clear APD bits */
val &= BCM_APD_CLR_MASK;
if (phydev->autoneg == AUTONEG_ENABLE)
val |= BCM54XX_SHD_APD_EN;
else
val |= BCM_NO_ANEG_APD_EN;
/* Enable energy detect single link pulse for easy wakeup */
val |= BCM_APD_SINGLELP_EN;
/* Enable Auto Power-Down (APD) for the PHY */
return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
}
EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
{
int val;
/* Enable EEE at PHY level */
val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL);
if (val < 0)
return val;
if (enable)
val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
else
val &= ~(LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X);
phy_write_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL, (u32)val);
/* Advertise EEE */
val = phy_read_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV);
if (val < 0)
return val;
if (enable)
val |= (MDIO_EEE_100TX | MDIO_EEE_1000T);
else
val &= ~(MDIO_EEE_100TX | MDIO_EEE_1000T);
phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val);
return 0;
}
EXPORT_SYMBOL_GPL(bcm_phy_set_eee);
int bcm_phy_downshift_get(struct phy_device *phydev, u8 *count)
{
int val;
val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
if (val < 0)
return val;
/* Check if wirespeed is enabled or not */
if (!(val & MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN)) {
*count = DOWNSHIFT_DEV_DISABLE;
return 0;
}
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR2);
if (val < 0)
return val;
/* Downgrade after one link attempt */
if (val & BCM54XX_SHD_SCR2_WSPD_RTRY_DIS) {
*count = 1;
} else {
/* Downgrade after configured retry count */
val >>= BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
val &= BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK;
*count = val + BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET;
}
return 0;
}
EXPORT_SYMBOL_GPL(bcm_phy_downshift_get);
int bcm_phy_downshift_set(struct phy_device *phydev, u8 count)
{
int val = 0, ret = 0;
/* Range check the number given */
if (count - BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET >
BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK &&
count != DOWNSHIFT_DEV_DEFAULT_COUNT) {
return -ERANGE;
}
val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
if (val < 0)
return val;
/* Se the write enable bit */
val |= MII_BCM54XX_AUXCTL_MISC_WREN;
if (count == DOWNSHIFT_DEV_DISABLE) {
val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN;
return bcm54xx_auxctl_write(phydev,
MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
val);
} else {
val |= MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN;
ret = bcm54xx_auxctl_write(phydev,
MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
val);
if (ret < 0)
return ret;
}
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR2);
val &= ~(BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK <<
BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT |
BCM54XX_SHD_SCR2_WSPD_RTRY_DIS);
switch (count) {
case 1:
val |= BCM54XX_SHD_SCR2_WSPD_RTRY_DIS;
break;
case DOWNSHIFT_DEV_DEFAULT_COUNT:
val |= 1 << BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
break;
default:
val |= (count - BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET) <<
BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
break;
}
return bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR2, val);
}
EXPORT_SYMBOL_GPL(bcm_phy_downshift_set);
struct bcm_phy_hw_stat {
const char *string;
u8 reg;
u8 shift;
u8 bits;
};
/* Counters freeze at either 0xffff or 0xff, better than nothing */
static const struct bcm_phy_hw_stat bcm_phy_hw_stats[] = {
{ "phy_receive_errors", MII_BRCM_CORE_BASE12, 0, 16 },
{ "phy_serdes_ber_errors", MII_BRCM_CORE_BASE13, 8, 8 },
{ "phy_false_carrier_sense_errors", MII_BRCM_CORE_BASE13, 0, 8 },
{ "phy_local_rcvr_nok", MII_BRCM_CORE_BASE14, 8, 8 },
{ "phy_remote_rcv_nok", MII_BRCM_CORE_BASE14, 0, 8 },
};
int bcm_phy_get_sset_count(struct phy_device *phydev)
{
return ARRAY_SIZE(bcm_phy_hw_stats);
}
EXPORT_SYMBOL_GPL(bcm_phy_get_sset_count);
void bcm_phy_get_strings(struct phy_device *phydev, u8 *data)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++)
strlcpy(data + i * ETH_GSTRING_LEN,
bcm_phy_hw_stats[i].string, ETH_GSTRING_LEN);
}
EXPORT_SYMBOL_GPL(bcm_phy_get_strings);
/* Caller is supposed to provide appropriate storage for the library code to
* access the shadow copy
*/
static u64 bcm_phy_get_stat(struct phy_device *phydev, u64 *shadow,
unsigned int i)
{
struct bcm_phy_hw_stat stat = bcm_phy_hw_stats[i];
int val;
u64 ret;
val = phy_read(phydev, stat.reg);
if (val < 0) {
ret = U64_MAX;
} else {
val >>= stat.shift;
val = val & ((1 << stat.bits) - 1);
shadow[i] += val;
ret = shadow[i];
}
return ret;
}
void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
struct ethtool_stats *stats, u64 *data)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++)
data[i] = bcm_phy_get_stat(phydev, shadow, i);
}
EXPORT_SYMBOL_GPL(bcm_phy_get_stats);
void bcm_phy_r_rc_cal_reset(struct phy_device *phydev)
{
/* Reset R_CAL/RC_CAL Engine */
bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
/* Disable Reset R_AL/RC_CAL Engine */
bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
}
EXPORT_SYMBOL_GPL(bcm_phy_r_rc_cal_reset);
int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev)
{
/* Increase VCO range to prevent unlocking problem of PLL at low
* temp
*/
bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
/* Change Ki to 011 */
bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
/* Disable loading of TVCO buffer to bandgap, set bandgap trim
* to 111
*/
bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
/* Adjust bias current trim by -3 */
bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
/* Switch to CORE_BASE1E */
phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
bcm_phy_r_rc_cal_reset(phydev);
/* write AFE_RXCONFIG_0 */
bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
/* write AFE_RXCONFIG_1 */
bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
/* write AFE_RX_LP_COUNTER */
bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
/* write AFE_HPF_TRIM_OTHERS */
bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
/* write AFTE_TX_CONFIG */
bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
return 0;
}
EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init);
int bcm_phy_enable_jumbo(struct phy_device *phydev)
{
int ret;
ret = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL);
if (ret < 0)
return ret;
/* Enable extended length packet reception */
ret = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
ret | MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN);
if (ret < 0)
return ret;
/* Enable the elastic FIFO for raising the transmission limit from
* 4.5KB to 10KB, at the expense of an additional 16 ns in propagation
* latency.
*/
return phy_set_bits(phydev, MII_BCM54XX_ECR, MII_BCM54XX_ECR_FIFOE);
}
EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo);
MODULE_DESCRIPTION("Broadcom PHY Library");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Broadcom Corporation");