linux_dsm_epyc7002/drivers/mmc/core/Kconfig
Ben Hutchings bd68e0838f mmc: add module parameter to set whether cards are assumed removable
Some people run general-purpose distribution kernels on netbooks with
a card that is physically non-removable or logically non-removable
(e.g. used for /home) and cannot be cleanly unmounted during suspend.
Add a module parameter to set whether cards are assumed removable or
non-removable, with the default set by CONFIG_MMC_UNSAFE_RESUME.

In general, it is not possible to tell whether a card present in an MMC
slot after resume is the same that was there before suspend.  So there are
two possible behaviours, each of which will cause data loss in some cases:

CONFIG_MMC_UNSAFE_RESUME=n (default): Cards are assumed to be removed
during suspend.  Any filesystem on them must be unmounted before suspend;
otherwise, buffered writes will be lost.

CONFIG_MMC_UNSAFE_RESUME=y: Cards are assumed to remain present during
suspend.  They must not be swapped during suspend; otherwise, buffered
writes will be flushed to the wrong card.

Currently the choice is made at compile time and this allows that to be
overridden at module load time.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Wouter van Heyst <larstiq@larstiq.dyndns.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:35 -08:00

19 lines
637 B
Plaintext

#
# MMC core configuration
#
config MMC_UNSAFE_RESUME
bool "Assume MMC/SD cards are non-removable (DANGEROUS)"
help
If you say Y here, the MMC layer will assume that all cards
stayed in their respective slots during the suspend. The
normal behaviour is to remove them at suspend and
redetecting them at resume. Breaking this assumption will
in most cases result in data corruption.
This option is usually just for embedded systems which use
a MMC/SD card for rootfs. Most people should say N here.
This option sets a default which can be overridden by the
module parameter "removable=0" or "removable=1".