AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 19:35:00 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
2c02b38a10
linux_dsm_epyc7002/drivers/w1/slaves/w1_ds2433.c
Thomas Gleixner 40b0b3f8fb treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 230 
Based on 2 normalized pattern(s):

  this source code is licensed under the gnu general public license
  version 2 see the file copying for more details

  this source code is licensed under general public license version 2
  see

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 52 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:06 +02:00

307 lines
7.0 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* w1_ds2433.c - w1 family 23 (DS2433) driver
*
* Copyright (c) 2005 Ben Gardner <bgardner@wabtec.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/slab.h>
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
#include <linux/crc16.h>
#define CRC16_INIT 0
#define CRC16_VALID 0xb001
#endif
#include <linux/w1.h>
#define W1_EEPROM_DS2433 0x23
#define W1_EEPROM_SIZE 512
#define W1_PAGE_COUNT 16
#define W1_PAGE_SIZE 32
#define W1_PAGE_BITS 5
#define W1_PAGE_MASK 0x1F
#define W1_F23_TIME 300
#define W1_F23_READ_EEPROM 0xF0
#define W1_F23_WRITE_SCRATCH 0x0F
#define W1_F23_READ_SCRATCH 0xAA
#define W1_F23_COPY_SCRATCH 0x55
struct w1_f23_data {
u8 memory[W1_EEPROM_SIZE];
u32 validcrc;
};
/**
* Check the file size bounds and adjusts count as needed.
* This would not be needed if the file size didn't reset to 0 after a write.
*/
static inline size_t w1_f23_fix_count(loff_t off, size_t count, size_t size)
{
if (off > size)
return 0;
if ((off + count) > size)
return (size - off);
return count;
}
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
static int w1_f23_refresh_block(struct w1_slave *sl, struct w1_f23_data *data,
int block)
{
u8 wrbuf[3];
int off = block * W1_PAGE_SIZE;
if (data->validcrc & (1 << block))
return 0;
if (w1_reset_select_slave(sl)) {
data->validcrc = 0;
return -EIO;
}
wrbuf[0] = W1_F23_READ_EEPROM;
wrbuf[1] = off & 0xff;
wrbuf[2] = off >> 8;
w1_write_block(sl->master, wrbuf, 3);
w1_read_block(sl->master, &data->memory[off], W1_PAGE_SIZE);
/* cache the block if the CRC is valid */
if (crc16(CRC16_INIT, &data->memory[off], W1_PAGE_SIZE) == CRC16_VALID)
data->validcrc |= (1 << block);
return 0;
}
#endif /* CONFIG_W1_SLAVE_DS2433_CRC */
static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
struct w1_f23_data *data = sl->family_data;
int i, min_page, max_page;
#else
u8 wrbuf[3];
#endif
if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
return 0;
mutex_lock(&sl->master->bus_mutex);
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
min_page = (off >> W1_PAGE_BITS);
max_page = (off + count - 1) >> W1_PAGE_BITS;
for (i = min_page; i <= max_page; i++) {
if (w1_f23_refresh_block(sl, data, i)) {
count = -EIO;
goto out_up;
}
}
memcpy(buf, &data->memory[off], count);
#else /* CONFIG_W1_SLAVE_DS2433_CRC */
/* read directly from the EEPROM */
if (w1_reset_select_slave(sl)) {
count = -EIO;
goto out_up;
}
wrbuf[0] = W1_F23_READ_EEPROM;
wrbuf[1] = off & 0xff;
wrbuf[2] = off >> 8;
w1_write_block(sl->master, wrbuf, 3);
w1_read_block(sl->master, buf, count);
#endif /* CONFIG_W1_SLAVE_DS2433_CRC */
out_up:
mutex_unlock(&sl->master->bus_mutex);
return count;
}
/**
* Writes to the scratchpad and reads it back for verification.
* Then copies the scratchpad to EEPROM.
* The data must be on one page.
* The master must be locked.
*
* @param sl The slave structure
* @param addr Address for the write
* @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
* @param data The data to write
* @return 0=Success -1=failure
*/
static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
{
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
struct w1_f23_data *f23 = sl->family_data;
#endif
u8 wrbuf[4];
u8 rdbuf[W1_PAGE_SIZE + 3];
u8 es = (addr + len - 1) & 0x1f;
/* Write the data to the scratchpad */
if (w1_reset_select_slave(sl))
return -1;
wrbuf[0] = W1_F23_WRITE_SCRATCH;
wrbuf[1] = addr & 0xff;
wrbuf[2] = addr >> 8;
w1_write_block(sl->master, wrbuf, 3);
w1_write_block(sl->master, data, len);
/* Read the scratchpad and verify */
if (w1_reset_select_slave(sl))
return -1;
w1_write_8(sl->master, W1_F23_READ_SCRATCH);
w1_read_block(sl->master, rdbuf, len + 3);
/* Compare what was read against the data written */
if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) ||
(rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0))
return -1;
/* Copy the scratchpad to EEPROM */
if (w1_reset_select_slave(sl))
return -1;
wrbuf[0] = W1_F23_COPY_SCRATCH;
wrbuf[3] = es;
w1_write_block(sl->master, wrbuf, 4);
/* Sleep for 5 ms to wait for the write to complete */
msleep(5);
/* Reset the bus to wake up the EEPROM (this may not be needed) */
w1_reset_bus(sl->master);
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
#endif
return 0;
}
static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
int addr, len, idx;
if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
return 0;
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
/* can only write full blocks in cached mode */
if ((off & W1_PAGE_MASK) || (count & W1_PAGE_MASK)) {
dev_err(&sl->dev, "invalid offset/count off=%d cnt=%zd\n",
(int)off, count);
return -EINVAL;
}
/* make sure the block CRCs are valid */
for (idx = 0; idx < count; idx += W1_PAGE_SIZE) {
if (crc16(CRC16_INIT, &buf[idx], W1_PAGE_SIZE) != CRC16_VALID) {
dev_err(&sl->dev, "bad CRC at offset %d\n", (int)off);
return -EINVAL;
}
}
#endif /* CONFIG_W1_SLAVE_DS2433_CRC */
mutex_lock(&sl->master->bus_mutex);
/* Can only write data to one page at a time */
idx = 0;
while (idx < count) {
addr = off + idx;
len = W1_PAGE_SIZE - (addr & W1_PAGE_MASK);
if (len > (count - idx))
len = count - idx;
if (w1_f23_write(sl, addr, len, &buf[idx]) < 0) {
count = -EIO;
goto out_up;
}
idx += len;
}
out_up:
mutex_unlock(&sl->master->bus_mutex);
return count;
}
static BIN_ATTR_RW(eeprom, W1_EEPROM_SIZE);
static struct bin_attribute *w1_f23_bin_attributes[] = {
&bin_attr_eeprom,
NULL,
};
static const struct attribute_group w1_f23_group = {
.bin_attrs = w1_f23_bin_attributes,
};
static const struct attribute_group *w1_f23_groups[] = {
&w1_f23_group,
NULL,
};
static int w1_f23_add_slave(struct w1_slave *sl)
{
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
struct w1_f23_data *data;
data = kzalloc(sizeof(struct w1_f23_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
sl->family_data = data;
#endif /* CONFIG_W1_SLAVE_DS2433_CRC */
return 0;
}
static void w1_f23_remove_slave(struct w1_slave *sl)
{
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
kfree(sl->family_data);
sl->family_data = NULL;
#endif /* CONFIG_W1_SLAVE_DS2433_CRC */
}
static struct w1_family_ops w1_f23_fops = {
.add_slave = w1_f23_add_slave,
.remove_slave = w1_f23_remove_slave,
.groups = w1_f23_groups,
};
static struct w1_family w1_family_23 = {
.fid = W1_EEPROM_DS2433,
.fops = &w1_f23_fops,
};
module_w1_family(w1_family_23);
MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
MODULE_DESCRIPTION("w1 family 23 driver for DS2433, 4kb EEPROM");
MODULE_LICENSE("GPL");
MODULE_ALIAS("w1-family-" __stringify(W1_EEPROM_DS2433));
Reference in New Issue View Git Blame Copy Permalink